How to recover a datasource from source system

Dear Experts,
i am trying to find a datasource(0PS_PRJTYPE_ATTR) in the source system. For some reason, I could only find the text one, not the attribute one. I checked in RSA5, RSA6 and RSA2. I couldn't find it.
What are the possible ways to recover the datasource, not sure if someone has deleted it.
Its really urgent, Please guide me.
Regards
Shanthi

Hi,
The same should be available in the source system (DEV), Surprising how / why the same is available in BW system.
I checked the SAP ERP source system to which I have an access and the same is not available in the source system not in the BW system
My sugession is to go for a generic datasource after identifying the table with the help of functional consultant.
Regards
Venkata Devaraj

Similar Messages

How to upload Transaction data from source system to BI 7.0

Dear friends,
I want to know how to upload Transaction data from source system to BI 7.0.
if anybody having step by step material for this process ,please send it to my
mail id.
[email protected]
[email protected]
Thanks,
D.prabhu

Hi,
it works in the same way as before in case you are not using the new features like the dtp and the transformations. Using the new features, you schedule a infopackage to load the data up to psa and schedule a dtp to post the data to the targets.
regards
Siggi
PS: We want to share knowledge in sdn and not keeping it private by having the information sent to our email adresses.

Datasources from source system replicated as 3.x instead 7.x

Hello BI Gurus,
I am Basis consultant and got stuck with an issues with incorrect datasource version replication while trying to create and connect to ECC source system.
Generally they are replicated as 7.x but this time for some strange reason it is replicated as 3.x.
We tried RSDS to do mass migration even though we would loose DTP etc but that didn't work.
We deleted and recreated the system which also replicates the datasources as 3.x.
The source ECC system is refreshed from production so does the target BI system.
This is the first time we connected specific ECC system to BI system.
BI system has multiple ECC system as source system connected to it.
Please help me asap as our development is on hold since long.

After making the copy, did you guys run BDLS to convert the former Production Logical System Name to the new name for the ECC environment and did that also to convert the former BW Logical System Name in the new ECC environment to the one it will be connected to?
If you wanted to use the same IDoc Types you were using in the original system you could use function modules RSAP_BIW_DISCONNECT and RSAP_BIW_CONNECT to disconnect the old reference and connect the new one specifying the same IDoc Type... You should do the same in BW and check table RSBASIDOC to confirm.
But yes, part of the definition of the Datasources, once you convert them is the logical system name... If it is different from the original all datasources get replicated as 3.x to maintain compatibility... At least that's what I've learnt...

Problem in activating datasource after replication from source system

Hi Experts,
After replication of data sources from source system ,I get all data sources inactive. I tried to make it active manually but every time I get
Syntax error in GP_ERR_RSAPTD1, row 27 (-> long text)
    Message no. RG102
Diagnosis
    Field "/BIC/CCZVBAK2031" is unknown. It is neither in one of the
    specified tables nor defi...
How do I go about solving this problem....Any advise please...

Hello,
You do not mention your source system release but can you execute the check report
described in the SAP note 493422 , if this does not resolve the problem can you goto
RSA1, right click on the relevant "source system" and choose the "restore" option,
then please try and replicate and activate the datasource again.
If you have BW release 7.0 please check that the note 929751is applied in your system
or that you are on a higher support package level.
If there is still a problem please le me know your BW Release and Support package level.
Best Regards,
Des

DataSource extraction very slow ( from Source System to PSA it takes 23 hrs

Friends,
We have enhanced the datasource 0CRM_SALES_ORDER_I with the user exit....after the enhancement i.e (adding the new fields and wrote some coding to enhance ...) the data extraction takes place for around 23 hours. there is approximately 2,50,000 records.
Can you please suggest any steps to tune up the performance of the datasource.
NOTE: Data Extraction from source system to PSA alone takes 23 hrs.once the data is arrived in PSA then the loading of data to cube is fast.
PLZ help me to solve this issue.
BASKAR

Hi Friends,
This is the code used for the datasource enhancement.(EXIT_SAPLRSAP_001)
DATA : IS_CRMT_BW_SALES_ORDER_I LIKE CRMT_BW_SALES_ORDER_I.
DATA: MKT_ATTR TYPE STANDARD TABLE OF CRMT_BW_SALES_ORDER_I.
DATA: L_TABIX TYPE I.
DATA: LT_LINK TYPE STANDARD TABLE OF CRMD_LINK,
      LS_LINK TYPE CRMD_LINK.
DATA: LT_PARTNER TYPE STANDARD TABLE OF CRMD_PARTNER,
      LS_PARTNER TYPE CRMD_PARTNER.
DATA: LT_BUT000 TYPE STANDARD TABLE OF BUT000,
      LS_BUT000 TYPE BUT000.
DATA: GUID TYPE CRMT_OBJECT_GUID.
DATA: GUID1 TYPE CRMT_OBJECT_GUID_TAB.
DATA: ET_PARTNER TYPE CRMT_PARTNER_EXTERNAL_WRKT,
      ES_PARTNER TYPE CRMT_PARTNER_EXTERNAL_WRK.
TYPES: BEGIN OF M_BINARY,
       OBJGUID_A_SEL TYPE CRMT_OBJECT_GUID,
        END OF M_BINARY.
DATA: IT_BINARY TYPE STANDARD TABLE OF M_BINARY,
      WA_BINARY TYPE M_BINARY.
TYPES : BEGIN OF M_COUPON,
         OFRCODE TYPE CRM_MKTPL_OFRCODE,
         END OF M_COUPON.
DATA: IT_COUPON TYPE STANDARD TABLE OF M_COUPON,
      WA_COUPON TYPE M_COUPON.
DATA: CAMPAIGN_ID TYPE CGPL_EXTID.
TYPES : BEGIN OF M_ITEM,
         GUID TYPE CRMT_OBJECT_GUID,
        END OF M_ITEM.
DATA: IT_ITEM TYPE STANDARD TABLE OF M_ITEM,
      WA_ITEM TYPE M_ITEM.
TYPES : BEGIN OF M_PRICE,
              KSCHL TYPE PRCT_COND_TYPE,
              KWERT TYPE PRCT_COND_VALUE,
              KBETR   TYPE PRCT_COND_RATE,
        END OF M_PRICE.
DATA: IT_PRICE TYPE STANDARD TABLE OF M_PRICE,
      WA_PRICE TYPE M_PRICE.
DATA: PRODUCT_GUID TYPE COMT_PRODUCT_GUID.
TYPES : BEGIN OF M_FRAGMENT,
         PRODUCT_GUID TYPE COMT_PRODUCT_GUID,
         FRAGMENT_GUID TYPE COMT_FRG_GUID,
         FRAGMENT_TYPE TYPE COMT_FRGTYPE_GUID,
       END OF M_FRAGMENT.
DATA: IT_FRAGMENT TYPE STANDARD TABLE OF M_FRAGMENT,
      WA_FRAGMENT TYPE M_FRAGMENT.
TYPES : BEGIN OF M_UCORD,
      PRODUCT_GUID TYPE     COMT_PRODUCT_GUID,
      FRAGMENT_TYPE     TYPE COMT_FRGTYPE_GUID,
      ZZ0010 TYPE     Z1YEARPLAN,
        ZZ0011 TYPE Z6YAERPLAN_1,
        ZZ0012 TYPE Z11YEARPLAN,
        ZZ0013 TYPE Z16YEARPLAN,
        ZZ0014 TYPE Z21YEARPLAN,
     END OF M_UCORD.
DATA: IT_UCORD TYPE STANDARD TABLE OF M_UCORD,
      WA_UCORD TYPE M_UCORD.
DATA: IT_CATEGORY TYPE STANDARD TABLE OF COMM_PRPRDCATR,
      WA_CATEGORY TYPE COMM_PRPRDCATR.
DATA: IT_CATEGORY_MASTER TYPE STANDARD TABLE OF ZPROD_CATEGORY ,
      WA_CATEGORY_MASTER TYPE ZPROD_CATEGORY .
types : begin of st_final,
           OBJGUID_B_SEL TYPE CRMT_OBJECT_GUID,
           OFRCODE TYPE CRM_MKTPL_OFRCODE,
           PRODJ_ID TYPE CGPL_GUID16,
           OBJGUID_A_SEL type     CRMT_OBJECT_GUID,
          end of st_final.
data : t_final1 type standard table of st_final.
data : w_final1 type st_final.
SELECT bOBJGUID_B_SEL aOFRCODE aPROJECT_GUID bOBJGUID_A_SEL INTO table t_final1 FROM
   CRMD_MKTPL_COUP as a inner join CRMD_BRELVONAE as b on bOBJGUID_A_SEL = aPROJECT_GUID .

Request for DataSource from Souce System has a lesser SID than the request

Hi Experts,
Request REQU_48Q572FT5LVYNE8BD4KOD5WTV(72.714) has not or not correctly been updated; Please edit
Message no. RSM096
Diagnosis
Request REQU_48Q572FT5LVYNE8BD4KOD5WTV (72.714) for DataSource 2LIS_13_VDKON from source system EP1CLNT410 has the status green and a lesser SID (and is therefore older) than the request that you currently want to update into the DataStore object.
This is not possible because the sequence of requests has to be followed.
Delta- and init requests have to be updated to the DataStore object in the request sequence.
Procedure
First update request REQU_48Q572FT5LVYNE8BD4KOD5WTV(72.714) for DataSource 2LIS_13_VDKON from source system EP1CLNT410 from the PSA into the DataStore object.
You can also set request REQU_48Q572FT5LVYNE8BD4KOD5WTV(&V2) to 'RED' in the monitor if this data is not required in the DataStore object. The request is then ignored during the check for completeness.
Request REQU_48Q572FT5LVYNE8BD4KOD5WTV (72.714 ) for DataSource
2LIS_13_VDKON from source system EP1CLNT410 has the status green and a
lesser SID (and is therefore older) than the request that you currently
want to update into the DataStore object.
This is not possible because the sequence of requests has to be
followed.
Delta- and init requests have to be updated to the DataStore object in
the request sequence.
First update request REQU_48Q572FT5LVYNE8BD4KOD5WTV (72.714 ) for
DataSource 2LIS_13_VDKON from source system EP1CLNT410 from the PSA into
the DataStore object.
You can also set request REQU_48Q572FT5LVYNE8BD4KOD5WTV (72.714 ) to
'RED' in the monitor if this data is not required in the DataStore
object. The request is then ignored during the check for completeness.
The error is triggered in the process chain, the request is already green, how do i resolve this, i already tried RSRQ is showed the request green, do you have any more idea to resolve this?
Thank you in advance.

Hi Ver Baylon,
After having deleted the request in the manage ODS you should run DTP not the info package again. Better yet I think you should do the following steps.
1. Double click on the corresponding info package. Then go to scheduler on the top left tab of the window and click on the initialization options for source system. There delete all the queues that exist.
2. Manage the PSA and delete all the requests
3. Delete form manage the DSO all the requests from the DSO.
Then go to the info package in the update tab and do a Initialize without data transfer
In the next step do a delta update.
After that execute a full DTP.
Check the results then
Hope that helps
John

Moving DataSources between source systems

Hi Gurus,
I'm facing problems when trying to move a datasource between two source systems. Here are some details about the situation:
- I created a DataSource based on a DB-Connect source system (Oracle DB)
- I moved this DS to test system where it has been attached to the Oracle-Test-DB.
- Now I'd like to load data in SAP test system from the Oracle-Prod-DB. So I created a new source system in the SAP test environment pointing to Oracle-Prod-DB. Then I updated the conversion of logical systems now changing the source system to the Oracle-Prod-DB. After collecting the datasource and transporting it to SAP test system I noticed that the datasource already existed remained untouched and an additional datasource has been created.
So, can you Gurus share any piece of advice how to change a datasource from one source system to another.
Any help is appreciated.
Thanks in advance.
Heiko

Hi Srini,
Thank you for you´re answer.
I have checked WE20 and W21. The ports and the partner profiles are created automaticly in BW and R/3 sides, when creating the new source system in RSA1.
The main problem is, that the R/3 can´t send data to BW, although the ALE and RFC configurations are setup properly. After I replicated and activated several data sources in BW succesfully, I´m requesting data from the R/3 system with an infopackage, but after a few hours the follwing failure message occurs in the monitor :
Errors while sending packages from OLTP to BI
Diagnosis
No IDocs could be sent to BI using RFC.
System Response
There are IDocs in the source system ALE outbox that did not arrive in the ALE inbox of BI.
Further analysis:
Check the TRFC log.
You can access this log using the wizard or the menu path "Environment -> Transact. RFC -> In source system".
Error handling:
If the TRFC is incorrect, check whether the source system is fully connected to BI. In particular, check the authorizations of the background user in the source system.
In the TRFC (SM58) log in R/3 there appears an status text with the following entry:
"No service for system SAPABC client 123 in the integration directory".
For this entry I have found the SAPnote 940313. In this note,there is described how to send Idocs over Integration Server. Now I think that our R/3 system tries to send Idocs over the Integration server too.
But is there another alternative to send Idocs from R/3 to BW without using the Integration server?
Best regards
Mehmet

Moving datasource between source systems

Hi Gurus,
I'm facing problems when trying to move a datasource between two source systems. Here are some details about the situation:
- I created a DataSource based on a DB-Connect source system (Oracle DB)
- I moved this DS to test system where it has been attached to the Oracle-Test-DB.
- Now I'd like to load data in SAP test system from the Oracle-Prod-DB. So I created a new source system in the SAP test environment pointing to Oracle-Prod-DB. Then I updated the conversion of logical systems now changing the source system to the Oracle-Prod-DB. After collecting the datasource and transporting it to SAP test system I noticed that the datasource already existed remained untouched and an additional datasource has been created.
So, can you Gurus share any piece of advice how to change a datasource from one source system to another.
Any help is appreciated.
Thanks in advance.
Heiko

Hi Srini,
Thank you for you´re answer.
I have checked WE20 and W21. The ports and the partner profiles are created automaticly in BW and R/3 sides, when creating the new source system in RSA1.
The main problem is, that the R/3 can´t send data to BW, although the ALE and RFC configurations are setup properly. After I replicated and activated several data sources in BW succesfully, I´m requesting data from the R/3 system with an infopackage, but after a few hours the follwing failure message occurs in the monitor :
Errors while sending packages from OLTP to BI
Diagnosis
No IDocs could be sent to BI using RFC.
System Response
There are IDocs in the source system ALE outbox that did not arrive in the ALE inbox of BI.
Further analysis:
Check the TRFC log.
You can access this log using the wizard or the menu path "Environment -> Transact. RFC -> In source system".
Error handling:
If the TRFC is incorrect, check whether the source system is fully connected to BI. In particular, check the authorizations of the background user in the source system.
In the TRFC (SM58) log in R/3 there appears an status text with the following entry:
"No service for system SAPABC client 123 in the integration directory".
For this entry I have found the SAPnote 940313. In this note,there is described how to send Idocs over Integration Server. Now I think that our R/3 system tries to send Idocs over the Integration server too.
But is there another alternative to send Idocs from R/3 to BW without using the Integration server?
Best regards
Mehmet

How to recover archived data in BW system ?

Dear Friends,
We are working on BW 3.1 system.
Please let us know how to recover archived data in BW system ?

Hi Sanjay Singh,
You have 2 options,
1) Either you can reload it through info package,
once you create the archiving object on any cube by defaulty the info package maintain the one option
Load from archive data( There select with which archived file you required).
2) Create infostructure,
create the datasource and reload it to infocube
i will give clear description by tomorrow
Regards
Prakash. Vadala

Regarding transporting datasource from DEVB system to QA system

HAI
Im extracting data from Oracle Source Tables by using DB-Connect.
I created datasource in RSDBC like 6DB_ZPMLEVENTINFO.
I want to transport this datasource from development system to QA system .
So how can i transport it from development system to QA system .
pls tell me
i ll assign the points
bye
rizwan

Hi,
Which Source System (DB-Connect) is connected to your BW QA system. You have maintain Source system mappings for datasource transports
AWB --> Tools --> Mapping of the source system names..
Once you have configured this screen, you would be able to transport your datasource.
Uday

How to recover vm host os file system (e.g / ,/boot )

how to recover vm host os file system (e.g / ,/boot ) from the destroy os ,at the same time ,it dosen't impact other image

Anybody knows if the source code of scadm tool is available somewhere ? (opensolaris etc. ?)
I don't have any additional advice to offer other than asking that you to try the flash-update all over again,
one more time, as if it were the beginning again.Yes but how because the SC is not discovered anymore by Solaris :
"rmclomv: WARNING: DP_GET_SDP_VERSION failed, ret=4"
"The SC hardware could not be initialized."
Can you try to flash the mainalomfw ? Your log contained only the flash of the alombootfw !
/usr/platform/`uname -i`/sbin/scadm download alommainfw
I guess jumper JP2 allows to recover from a failed flash by selecting the un-touched half the PROM.It does not work as the SC is not responding anymore to Solaris
Sun Microsystems Inc. SunOS 5.10 Generic January 2005
v210:~#
v210:~# cd /usr/platform/`uname -i`/lib/images
v210:/usr/platform/SUNW,Sun-Fire-V210/lib/images# /usr/platform/`uname -i`/sbin/scadm download alommainfw
scadm: The SC hardware could not be initialized.
v210:/usr/platform/SUNW,Sun-Fire-V210/lib/images#
ERROR: ERROR: Unable to open the SC device.
It's a pitty that obtaining OBP/ALOM updates requires a service contract. I got a V210 recently.
Unfortunately both OBP and ALOM are the intial release 4.8.2 / 1.0.I agree but it's probably also because you need support in case it fails ;-)
Thanks for your answers!

Error in Process Chain while extracting data from source system

Hi All,
Dail we are facing problem while retrieving the data from source system for the data source 0TB_AMOUNT1 in the process chain, it is giving error "Function module BANK_TMC_API_SIM_GET does not exist Furnction module". when I repeat the step than it is going fine.
Please let me know why this error is coming for first why it is not coming after repeating the step?
Thanks & Regards,
Murali.

Hi Murali,
Hope you are doing good..
Is it a full or Delta load on a daily basis? Did you check if the FM exists in your system?
Did you try debugging the load in source system and check if the extractor is trying to call FM you mention.
If possible please post the exact error message you are receiving so that we could get an idea whats the error and why you are encountering it.
As of now what i can suggest is, go to RSA2 in source system, give the datasource name and check if the extractor code has FM in it.
Regards,
Anil Pragada.

Error in loading data into PSA from source system.

Hi Experts !!!
Good morning .
I am trying to load data from SRM source system into BI system.When I execute infopackage,the data is not loaded into PSA and status of the process immediately becomes yellow.After sometime it gets timed out and converts to RED.When I checked the error documentation I found that the iDOCS response was not received from the source system.Detailed error is as below.
System Response
There are idocs in the source system ALE outbox that did not arrive in the ALE inbox of BI.
Further Analysis
Check the TRFC log
you can access this log using the wizard OR menu path "Environment > Transact. RFC> In the source system
However,I was not able to navigate to this path.I think if I can navigate to this path,I can manually push IDOCS from source system to BI system.
Regards,
Mandar.

Hi,
Check the DataSource in RSA3, if it is working fine and able to see the data in RSA3, there is no problem in DS level, then check the Mappings and any routines in BW for that DS, if this is also fine then check the below options.
See Dumps in ST22, SM21 also.
Check RFC Connection between ECC and BW systems, i.e. RSA1-->Source System->Right Click on Source system and Check.
You must have the following profiles to BWREMOTE or ALEREMOTE users.So add it. Bcoz either of these two users will use in background to get extract the data from ECC, so add these profiels in BW.
S_BI-WHM_RFC, S_BI-WHM_SPC, S_BI-WX_RFC
And also check the following things.
1.Connections from BW to ECC and ECC to BW in SM59
2.Check Port,Partner Profiles,and Message Types in WE20 in ECC & BW.
3.Check Dumps in ST22, and SM21.
4.If Idocs are stuck i.e see the OLTP Idoc numbers in RSMO Screen in (BW) detials tab see in bottom, you can see OLTP Idoc number and take the Idoc numbers and then goto to ECC see the status in WE05 or WE02, if error then check the log else goto to BD87 in ECC and give the Idoc numbers and execute manually and see in RSMO and refresh.
5.Check the LUWs struck in SM58,User Name = * (star) and run it and see Strucked LUWs and select our LUW and execute manually and see in RSMO in BW.
See in SDN
Re: Loading error in the production system
IDOC getting struck at TRFC (SM58)
1.Reorg of table (ARFCSSTATE )
2.Incraesing the resources in the system (no of processes and memory ) , as this issue happens owing to this.
Source system tries to send TRFC to target and if there are no WP's available it will come to Transaction Recorded state, and form here it will not try to send this TRFC.So you have to execute this manually.
Also we can increase the timeout parameter so that it can try few more times to send before actually it comes to recorded state.
Regards,
Suman

How to Reconcile Data Between SAP Source Systems and SAP NetWeaver BI

Hi,
I just read "How to Reconcile Data Between SAP Source Systems and SAP NetWeaver BI". While I'm waiting for more authorisation to r/3 to carry it out and test this functionality.
I'd like to ask a question to anyone who has implemented this type solution. On page 10 it talks about creating a view then setting up the datasource. The solution talks about runnig a query. I suspect when we run a query I would run it for only a period(using variable) to reconcile.
My question is this. Will the datasource extractor on /r3 only select the period in our variable or will it do a full selection of the data which would then be passed to BW for filtering?
Regards

DEar Mark,
There are several avenues where you can see and reconcile your data with source system, u can see data in by tcode RSA3 for a datasource, and compare the values with actual document posted into the R/3 system. Respective fuctional consultant canhelp you a lot to confirm the data.
On BW side u can see the data in PSA and then check tranformations which subsequent change/update/reject data records based on the selective conditions.
hope this helps.
Kindly assign the points if it works.
Revert back if u need futher help/information.

Question to Transferring Global Settings from Source Systems

1) When we do this steps, we found the following information as follows, so the question is that which fields that we should maintain?
BW User ALE
Debugging User
BEx order number
Releasest. hier
Monitor initial
Last IDoc no.
Last IS-Nr.
XPRA executed
Lock Mangr Logs
MD: Sing. Rec. Inst
RFC BI Accelerator
2) If we maintain some of fields should we do something before, and how? e.g. we know BW user ALE = aleremote, so should we maintain aleremote user using SU01 both in R/3 and BW before we do Transferring Global Settings from Source Systems
Thanks for the answer.

Is anyone know how to setting Transferring Global Settings from Source Systems, your answer will be high appreciate.

How to recover a datasource from source system

Similar Messages

Maybe you are looking for