How to recover data after performing a product recovery operation
Hi there,
Recently, my Toshiba computer experienced a blue screen error. I tried running the computer in safe mode and all the other modes available, but the blue screen kept appearing. I had no other choice but to run the Product Recovery CD that came with the laptop. Once it was done, I was happy to find that the laptop was working, but all my files were deleted! Now, I know this meant the HDD was formatted during the product !recovery operation, but is there any way in which my lost files can be restored???
Desperate for help,
Thanks,
Matheson
Hello
Not easy to say because before OS installation the HDD is formatted and existing partitions are also overwritten. I really do not know what to say. If you have some very important data try to talk with experts. Google a little bit around. I hope you will find someone who can help you.
Similar Messages
-
Recovering data after factory reset (security issue)
Hello there,
Recently a friend of mine asked me how to erase all data on an iPhone ? I pointed to him to "factory reset".
Now, I see a bunch of websites that show how to recover data after factory reset using their software, not sure if they work as advertised or not.
What I would like to know is if the user wants the data to be erased and non-recoverable, is this the best option or if there is any other option available in iPhone that can make the data un-recoverable. We want to make sure the data is un-recoverable after factory reset.
thanks
Ashish Shahunfortunately this doesn't answer my question.
I do know the option to "erase all content and settings" in iPhone.
What I want to know is to make sure once done, no one can recover that data back. Since this phone will be sold off to some stranger, we don't want them to have access to the data.
Here are a few websites from my just preliminary search results that show how to recover data.
just google "extracting data after factory reset iPhone" and you will see a bunch of websites offering their products to recover. So I want to check if this is so simple, how can we really make sure the data is wiped off clean.
Ashish Shah -
How to stored data after clicking checkbox save in database table
TYPE-pools: slis.
tables:mkpf,mseg,mard,COWB_COMP.
TYPES: BEGIN OF tp_data,
mblnr LIKE mseg-mblnr,
matnr LIKE mseg-matnr,
werks LIKE mard-werks,
lgort LIKE mard-lgort,
lgpbe LIKE mard-lgpbe,
charg LIKE mseg-charg,
bwart LIKE mseg-bwart,
budat LIKE mkpf-budat,
menge LIKE mseg-menge,
meins LIKE mseg-meins,
kostl LIKE mseg-kostl,
aufnr LIKE mseg-aufnr,
rsnum LIKE mseg-rsnum,
endkz like COWB_COMP-endkz,
END OF tp_data,
tp_tbl_data TYPE STANDARD TABLE OF tp_data.
*data: t_data like ztable occurs 0 with header line.
Constants
Data objects (variable declarations and definitions)
Report data to be shown.
DATA: it_data TYPE STANDARD TABLE OF tp_data.
Heading of the report.
DATA: t_heading TYPE slis_t_listheader.
========================== Selection Screen ==========================
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECT-OPTIONS:smblnr FOR mseg-mblnr MODIF ID m1,
smatnr FOR mseg-matnr MODIF ID m2,
swerks FOR mard-werks MODIF ID m3,
slgort FOR mard-lgort MODIF ID m4,
slgpbe FOR mard-lgpbe MODIF ID m5,
scharg FOR mseg-charg MODIF ID m6,
sbwart FOR mseg-bwart MODIF ID m7,
skostl FOR mseg-kostl MODIF ID m8,
saufnr FOR mseg-aufnr MODIF ID m9,
srsnum FOR mseg-rsnum MODIF ID m10.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
PARAMETERS:pre RADIOBUTTON GROUP radi USER-COMMAND ucomm DEFAULT 'X',
pse RADIOBUTTON GROUP radi,
bps RADIOBUTTON GROUP radi.
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-003.
PARAMETER:layout TYPE i.
SELECTION-SCREEN END OF BLOCK b3.
=========================== Event Blocks =============================
AT selection-SCREEN.
start-OF-selection.
PERFORM get_data USING it_data.
END-OF-selection.
PERFORM build_alv USING it_data t_heading.
=========================== Subroutines ==============================
*& Form get_data
Gets the information to be shown in the report.
FORM get_data USING t_data TYPE tp_tbl_data.
SELECT msegmblnr msegmatnr mardwerks mardlgort mardlgpbe msegcharg msegbwart mkpfbudat
msegmenge msegmeins msegkostl msegaufnr mseg~rsnum
INTO CORRESPONDING FIELDS OF TABLE t_data
FROM mseg
JOIN mard ON mardmatnr EQ msegmatnr
JOIN mkpf ON msegmblnr EQ mkpfmblnr
WHERE mseg~matnr IN smatnr.
ENDFORM. " get_data
*& Form build_alv
Builds and display the ALV Grid.
FORM build_alv USING t_data TYPE tp_tbl_data
t_heading TYPE slis_t_listheader.
ALV required data objects.
DATA: w_title TYPE lvc_title,
w_comm TYPE slis_formname,
w_status TYPE slis_formname,
x_layout TYPE slis_layout_alv,
t_event TYPE slis_t_event,
t_fieldcat TYPE slis_t_fieldcat_alv,
t_sort TYPE slis_t_sortinfo_alv.
REFRESH t_fieldcat.
REFRESH t_event.
REFRESH t_sort.
CLEAR x_layout.
CLEAR w_title.
Field Catalog
PERFORM set_fieldcat2 USING:
1 'MBLNR' 'MBLNR' 'MSEG' space space space space space space space space space space space space t_fieldcat ,
2 'MATNR' 'MATNR' 'MSEG' space space space space space space space space space space space space t_fieldcat ,
3 'WERKS' 'WERKS' 'MARD' space space space space space space space space space space space space t_fieldcat,
4 'LGORT' 'LGORT' 'MARD' space space space space space space space space space space space space t_fieldcat ,
5 'LGPBE' 'LGPBE' 'MARD' space space space space space space space space space space space space t_fieldcat ,
6 'CHARG' 'CHARG' 'MSEG' space space space space space space space space space space space space t_fieldcat ,
7 'BWART' 'BWART' 'MSEG' space space space space space space space space space space space space t_fieldcat,
8 'BUDAT' 'BUDAT' 'MKPF' space space space space space space space space space space space space t_fieldcat,
9 'MENGE' 'MENGE' 'MSEG' space space space space space space space space space space space space t_fieldcat,
10 'MEINS' 'MEINS' 'MSEG' space space space space space space space space space space space space t_fieldcat,
11 'KOSTL' 'KOSTL' 'MSEG' space space space space space space space space space space space space t_fieldcat,
12 'AUFNR' 'AUFNR' 'MSEG' space space space space space space space space space space space space t_fieldcat,
13 'RSNUM' 'RSNUM' 'MSEG' space space space space space space space space space space space space t_fieldcat,
14 'ENDKZ' 'ENDKZ' 'COWB_COMP' space space 'select' 'Select this row' 'Sel' 'Select this row' space space space 'X' 'X' space t_fieldcat.
Layout
x_layout-zebra = 'X'.
Top of page heading
PERFORM set_top_page_heading USING t_heading t_event.
Events
PERFORM set_events USING t_event.
GUI Status
w_status = ''.
User commands
w_comm = 'USER_COMMAND'.
Order
Example
PERFORM set_order USING '<field>' 'IT_DATA' 'X' space space t_sort.
PERFORM set_order USING 'MBLNR' 'IT_DATA' 'X' space 'X' t_sort.
PERFORM set_order USING 'EBELN' 'IT_DATA' 'X' space 'X' t_sort.
PERFORM set_order USING 'EBELP' 'IT_DATA' 'X' space space t_sort.
Displays the ALV grid
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = sy-repid
it_fieldcat = t_fieldcat
is_layout = x_layout
it_sort = t_sort
i_callback_pf_status_set = w_status
i_callback_user_command = w_comm
i_save = 'X'
it_events = t_event
i_grid_title = w_title
TABLES
t_outtab = t_data
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " build_alv.
*& Form set_top_page_heading
Creates the report headings.
FORM set_top_page_heading USING t_heading TYPE slis_t_listheader
t_events TYPE slis_t_event.
DATA: x_heading TYPE slis_listheader,
x_event TYPE LINE OF slis_t_event.
Report title
CLEAR t_heading[].
CLEAR x_heading.
x_heading-typ = 'H'.
x_heading-info = 'Reporte Prueba'(001).
APPEND x_heading TO t_heading.
Program name
CLEAR x_heading.
x_heading-typ = 'S'.
x_heading-KEY = 'Program: '.
x_heading-info = sy-repid.
APPEND x_heading TO t_heading.
User who is running the report
CLEAR x_heading.
x_heading-typ = 'S'.
x_heading-KEY = 'User: '.
x_heading-info = sy-uname.
APPEND x_heading TO t_heading.
Date of execution
CLEAR x_heading.
x_heading-typ = 'S'.
x_heading-KEY = 'Date: '.
WRITE sy-datum TO x_heading-info.
APPEND x_heading TO t_heading.
Time of execution
CLEAR x_heading.
x_heading-typ = 'S'.
x_heading-KEY = 'Time: '.
WRITE sy-uzeit TO x_heading-info.
APPEND x_heading TO t_heading.
Top of page event
x_event-name = slis_ev_top_of_page.
x_event-FORM = 'TOP_OF_PAGE'.
APPEND x_event TO t_events.
ENDFORM.
*& Form set_events
Sets the events for ALV.
The TOP_OF_PAGE event is alredy being registered in
the set_top_page_heading subroutine.
FORM set_events USING t_events TYPE slis_t_event.
DATA: x_event TYPE LINE OF slis_t_event.
Example
clear x_event.
x_event-name = .
x_event-form = .
append x_event to t_event.
ENDFORM.
*& Form set_order
Adds an entry to the order table.
FORM set_order USING p_fieldname p_tabname p_up p_down p_subtot
t_sort TYPE slis_t_sortinfo_alv.
DATA: x_sort TYPE slis_sortinfo_alv.
CLEAR x_sort.
x_sort-fieldname = p_fieldname.
x_sort-tabname = p_tabname.
x_sort-UP = p_up.
x_sort-down = p_down.
x_sort-subtot = p_subtot.
APPEND x_sort TO t_sort.
ENDFORM. "set_order
*& Form set_fieldcat2
Adds an entry to the field catalog.
FORM set_fieldcat2 USING p_colpos p_fieldname p_ref_fieldname p_ref_tabname
p_outputlen p_noout
p_seltext_m p_seltext_l p_seltext_s p_reptext_ddic p_ddictxt
p_hotspot p_showasicon p_checkbox p_edit
p_dosum
t_fieldcat TYPE slis_t_fieldcat_alv.
DATA: wa_fieldcat TYPE slis_fieldcat_alv.
CLEAR wa_fieldcat.
General settings
wa_fieldcat-fieldname = p_fieldname.
wa_fieldcat-col_pos = p_colpos.
wa_fieldcat-no_out = p_noout.
wa_fieldcat-HOTSPOT = p_hotspot.
wa_fieldcat-CHECKBOX = p_checkbox.
wa_fieldcat-ICON = p_showasicon.
wa_fieldcat-do_sum = p_dosum.
Set reference fieldname, tablenam and rollname.
If p_ref_tabname is not given, the ref_fieldname given is a data element.
If p_ref_tabname is given, the ref_fieldname given is a field of a table. In case ref_fieldname is not given, it is copied from the fieldname.
IF p_ref_tabname IS INITIAL.
wa_fieldcat-rollname = p_ref_fieldname.
ELSE.
wa_fieldcat-ref_tabname = p_ref_tabname.
IF p_ref_fieldname EQ space.
wa_fieldcat-ref_fieldname = wa_fieldcat-fieldname.
ELSE.
wa_fieldcat-ref_fieldname = p_ref_fieldname.
ENDIF.
ENDIF.
Set output length.
IF NOT p_outputlen IS INITIAL.
wa_fieldcat-outputlen = p_outputlen.
ENDIF.
Set text headers.
IF NOT p_seltext_m IS INITIAL.
wa_fieldcat-seltext_m = p_seltext_m.
ENDIF.
IF NOT p_seltext_l IS INITIAL.
wa_fieldcat-seltext_l = p_seltext_l.
ENDIF.
IF NOT p_seltext_s IS INITIAL.
wa_fieldcat-seltext_s = p_seltext_s.
ENDIF.
IF NOT p_reptext_ddic IS INITIAL.
wa_fieldcat-reptext_ddic = p_reptext_ddic.
ENDIF.
IF NOT p_ddictxt IS INITIAL.
wa_fieldcat-ddictxt = p_ddictxt.
ENDIF.
Set as editable or not.
IF p_edit IS NOT INITIAL.
wa_fieldcat-INPUT = 'X'.
wa_fieldcat-EDIT = 'X'.
ENDIF.
APPEND wa_fieldcat TO t_fieldcat.
ENDFORM. "set_fieldcat2
=========================== Subroutines called by ALV ================
*& Form top_of_page
Called on top_of_page ALV event.
Prints the heading.
FORM top_of_page.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
i_logo = 'XXXXX'
it_list_commentary = t_heading.
ENDFORM. " alv_top_of_page
*& Form user_command
Called on user_command ALV event.
Executes custom commands.
FORM user_command USING r_ucomm LIKE sy-ucomm
rs_selfield TYPE slis_selfield.
ENDFORM. "user_command
this is my code, how to store data after clicking checkbox in databasetable,
how to write that cide.
plz send me code.hi!,
use MODIFY to update data into the data base table.
regards
anjali -
How to read data after select multiple record by checkbox,
hi experts
i m using simple report with check box , and itab whcih contain records
how to read data after select multiple record by checkbox,
thanksHi Prashant,
Try using this logic.This Code displays the list with check boxes. When you check a checkbox and press a button say 'Select All' or 'De Select all' or 'Display'. It will read the data of those records.
DATA :
fs_flight TYPE type_s_flight,
fs_flight1 TYPE type_s_flight1.
* Internal tables to hold Flight Details *
DATA :
t_flight LIKE
STANDARD TABLE
OF fs_flight,
t_flight1 LIKE
STANDARD TABLE
OF fs_flight1.
SET PF-STATUS 'SELECT' .
PERFORM selection.
PERFORM displaybasic .
* AT USER COMMAND EVENT *
AT USER-COMMAND.
PERFORM selectall .
*& Form SELECTION
* Select query to reteive data from SPFLI table
* There are no interface parameters to be passed to this subroutine.
FORM selection .
SELECT carrid " Airline Code
connid " Flight Connection Number
FROM spfli
INTO TABLE t_flight.
DESCRIBE TABLE t_flight LINES w_lines .
ENDFORM. " SELECTION
*& Form DISPLAYBASIC
* Display the basic list with SPFLI data
* There are no interface parameters to be passed to this subroutine.
FORM displaybasic .
LOOP AT t_flight INTO fs_flight.
WRITE :
w_check AS CHECKBOX,
w_mark,
fs_flight-carrid UNDER text-001,
fs_flight-connid UNDER text-002.
ENDLOOP. " LOOP AT T_FLIGHT..
CLEAR fs_flight-carrid .
CLEAR fs_flight-connid.
ENDFORM. " DISPLAYBASIC
*& Form SELECTALL
* To check all the checkboxes with a 'selectall' push button
* There are no interface parameters to be passed to this subroutine.
FORM selectall .
CASE sy-ucomm.
WHEN 'SELECT_ALL'.
w_check = 'X'.
w_line = 4 .
DO w_lines TIMES.
READ LINE w_line .
MODIFY LINE w_line FIELD VALUE w_check .
ADD 1 TO w_line .
ENDDO. " DO W_LINES TIMES
CLEAR w_line.
WHEN 'DESELECTAL'.
w_check = space.
w_line = 4 .
DO w_lines TIMES.
READ LINE w_line FIELD VALUE w_mark .
IF w_mark = space .
MODIFY LINE w_line FIELD VALUE w_check .
ENDIF. " IF W_MARK = SPACE
ADD 1 TO w_line .
ENDDO. " DO W_LINES TIMES
WHEN 'DISPLAY'.
IF sy-lilli BETWEEN 4 AND w_lines .
DO w_lines TIMES.
READ LINE w_num FIELD VALUE w_check INTO w_check
fs_flight-carrid INTO fs_flight-carrid
fs_flight-connid INTO fs_flight-connid.
IF sy-subrc = 0.
IF w_check = 'X'
SELECT carrid
connid
fldate " Flight date
seatsmax " Maximum capacity in economy
seatsocc " Occupied seats in economy class
FROM sflight
INTO TABLE t_flight1
WHERE carrid = fs_flight-carrid
AND connid = fs_flight-connid.
LOOP AT t_flight1 INTO fs_flight1.
WRITE :
/ fs_flight-carrid UNDER text-001,
fs_flight-connid UNDER text-002,
fs_flight1-fldate UNDER text-007,
fs_flight1-seatsmax UNDER text-008,
fs_flight1-seatsocc UNDER text-009.
ENDLOOP.
ENDIF. " IF SY-SUBRC = 0
ENDIF. " IF W_CHECK = 'X'.
ADD 1 TO w_num.
ENDDO. " DO W_LINES TIMES
CLEAR w_check.
w_num = 0.
ELSE .
MESSAGE 'INVALID CURSOR POSITION ' TYPE 'E' .
ENDIF. " IF SY-LILLI BETWEEN..
ENDCASE. " CASE SY-UCOMM
ENDFORM. " SELECTALL
Much Regards,
Amuktha. -
How to recover Contacts after MobileMe to iCloud upgrade?
How to recover Contacts after MobileMe to iCloud upgrade?
I assume that the regular backups of the contacts and calendar only work on a Mac
No, you can backup contacts and calendars on a Windows PC. There are many backup options for PCs, but you would've had to set one up. Don't you backup any of the data on your PC?
Your recommendation is that I restroe my entire iPhone from the last iTunes backup to recover these files?
That's really your only option with no other backups available. See: http://support.apple.com/kb/ht4946
There's no guarantee that the iTunes Backup will include all your contacts, as noted in the support article above, you're supposed to maintain backups of the contacts in the contact manager you sync with. -
How to recover data in iPhoto?
How to recover data from iphoto?
I haven't done any conscious backup.
Time to start. Now. Using a computer without a back up is like driving without a seat belt. You'll be fine as long as nothing goes wrong, but if something does go wrong it'll be a much bigger mess.
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. -
How to recover data and system in MacBook Pro?
I have a MacBook Pro. I have now problem about booting the system. The GRAY logo comes with blinking by a "Stop" logo and the system can not open. When I use the Mac Installation DVD (Snow Leopard) all my data goes to be erased after installing a fresh one.
Shall I recover my Mac?
If I couldn't recover and was forced to install a fresh OS, is it possible to recover data after having the fresh installation?
Thank you
Diakodiakomacdiako wrote:
If I couldn't recover and was forced to install a fresh OS, is it possible to recover data after having the fresh installation?
Not much, but you can install OS X on a extenral drive, boot from it and recover files, then do the erase and install.
Create a data recovery/undelete external boot drive -
HT4623 how to recover data for contacts on iPad mini
how to recover data for contacts on ipad mini?
You don't give much info to go on. Do you sync your contacts?
-
HT4483 how to recover photos after updating iPad to iOS 5?
How to recover photos after updating iPad to iOS 5?
If you didn't back them up, such as to an appropriate photo app's photo library on a Mac or PC, there is nothing to recover.
-
How can I install after effects on 32 bit operating system?
How can I install after effects on 32 bit operating system?
I cant even find it in creative cloud.
I want to make a intro but it dossent allow me to even find/ istall it.
I hope some one will help me by anwsering my question.
Than you for time.If your system does not meet the minimum system requirements you have to go back to a version that does. Try the direct download links you'll find here.. CS5 comes bundled with CS4 for AE which is the last version to run on a 32 bit system.
-
HOW TO RECOVER info SAFETY, IF REGISTERED MAIL RECOVERY, MASTERING WAS Dismissed
HOW TO RECOVER INFO SAFETY, IF REGISTERED MAIL RECOVERY, MASTERING WAS DISMISSED
I'm sorry, but not only is it not clear what exactly you are talking about, but you've posted in the forum for making podcasts which has nothing to do with your question.
These forums are user-to-user - ye ou are not talking to Apple here, so no-one here can give you specific information about any order you may have placed.
If you have a more general query please select the appropriate forum from the list here:
https://discussions.apple.com/index.jspa
and post your question with as much detail as possible (but do not post personal information such as your address, email address, or serial numbers of equipment). -
How do I restore old emails from recovered data after hard drive crash?
Hi all - I used data rescue II to recover data from a crashed hard drive - seems to have worked pretty well, as the file structure seems to be mostly intact - now I'm trying to find the old emails and get them back in my inbox/sent mailboxes where they belong - any help is surely appreciated - thanks
Hi Tommybanjo.
Mail stores the messages in .emlx files, but you cannot import individual messages directly, only entire mailboxes. In order to import the recovered .emlx files back into Mail, they must be organized as if they were in an .mbox mailbox, i.e. they must be in a Messages folder within an .mbox folder. You may create a folder called Recovered.mbox, then a Messages folder within this folder, then put the .emlx files within the Messages folder, then import that.
In Mail, do File > Import Mailboxes, choose Mail for Mac OS X as the data format, and follow the instructions. Note that Mail wants you to select the folder that contains the mailboxes to be imported (i.e. the folder where the .mbox folders to be imported reside), not the .mbox folders themselves nor the Messages folders within them.
Given the circumstances, however, there could be something wrong with one or more of the recovered messages and that might cause the import to fail. If that’s the case, you may try organizing the recovered messages in several smaller mailboxes and try to identify the messages that Mail has trouble with. Alternatively, you may try using emlx to mbox Converter or Emailchemy to convert the .emlx files to standard mbox format, then import that in Mail as Other. -
How to recover photos after restoring iPod touch?
Yesterday, there was an update for the iOS 6, I believe. When I pressed the update button, a message popped up saying that there was a problem with my iPod touch 4G and that I need to restore it. I had absolutely no idea why that message would pop up in the first place because my iPod was working just fine. But I couldn't update my iPod to the newest version if I didn't do what iTunes says... so I was about to restore my iPod, but then I was worried that all of my photos would disappear. So I decided to update my iOS later so that I could transfer all my files on to my computer. I then unplugged my iPod, and tried to turn it on but the home screen wouldn't pop - no matter what I did, all the screen showed was an itunes icon on top with a USB plug-in cord at the bottom. So I had no choice but to restore my iPod. The thing is, once I restored my iPod and all, my photos were all gone and I did not use iCloud as a back-up since a few months ago. All of my recent photos are now gone and I have no idea how to recover them. I've tried programs that aim to recover deleted photos, but they didn't work.
Is there a way to recover photos after restoring the iPod Touch?Hello,
It is very important to backup your device to the computer before updating or restoring.
You can restore your device to a previous backup, all the photos that were there when you made the backup should return with it, but I'm afraid that any photos taken or saved after the last backup are unrecoverable.
I hope this helps.
~Lt. Leviathan -
How to recover data from bad hard drive
Once a hard drive goes bad (cannot get into the computer), is there any hope of recovering any data from it? If so, how?
Do you mean the hard drive is mechanically broken for sure? It's not a data corruption issue that is causing a problem with starting up the Mac, but maybe not be a bad mechanism?
If the drive is definitely broken, there are businesses that specialize in recovering data from bad hard drives. For example
http://www.drivesaversdatarecovery.com/ (I always saw their booth at MacWorld Expos...)
The cost of such services is usually high.
cannot get into the computer
So that probably means the hard drive in question is the internal drive? If you don't know for sure that the hard drive is physically broken, you can try starting up using your Mac OS X installation disc. Insert disc in optical drive and start up with the C key held down. When you get to Installer's screen, go up to the menu bar and run Disk Utility from the Utilities menu. Does the internal drive appear in the Disk Utility sidebar?
Alternately, if you have another Mac (that has FireWire), you can try starting the Mac with the problem in FireWire Target Disk Mode,
http://support.apple.com/kb/HT1661
Connect the "target" Mac to the other Mac (running normally) using a FireWire cable. Run Disk Utility on that Mac. Does the hard drive of the Mac in FireWire Target Disk Mode appear in the sidebar?
If you can get the internal drive to appear in Disk Utility, you may be able to run Repair Disk on the First Aid tab. There are also third-party utilities, such as TechTool Pro (Micromat), Drive Genius (Prosoft), and Disk Warrior (Alsoft), that may be able to fix (or at least recover data from) the hard drive. -
How to recover data from a hard drive with bad blocks?
An external hard drive, 4TB Iomega...connected via eSATA cable...had a power outage and the drive won't be read by OSX now. (Yes, it was on a surge protector and no I did not have a backup. I was actually preparing for the process of creating a backup when the power went out!) Anyway, I have tried using Data Rescue 3 and DiskDrill to try and recover data from the drive. I can recover the first 1/3 of the drive, but it ejects when either app tries to access the bad block. Can anyone tell me how/what software to use to recover the data? I know there are programs that will avoid the bad block but I've only found them for Windows. Are there any that will do such a thing in Lion? Any help will be appreciated...and no, I can not afford a data recovery service. Trying to do this on my own.
Basics of File Recovery
If you stop using the drive it's possible to recover deleted files that have not been overwritten by using recovery software such as Data Rescue II, File Salvage or TechTool Pro. Each of the preceding come on bootable CDs to enable usage without risk of writing more data to the hard drive. Two free alternatives are Disk Drill and TestDisk. Look for them and demos at MacUpdate or CNET Downloads.
The longer the hard drive remains in use and data are written to it, the greater the risk your deleted files will be overwritten.
Also visit The XLab FAQs and read the FAQ on Data Recovery.
Maybe you are looking for
-
Dear Gurus, I wanted to delete a PO line item permanently from PO. is it possible or not??? If yes how can i achieve this. Regards Girish Kavital
-
Unable to view the approvers in approval preview at SRM PO change
Hi, We are using SRM 5.0, we are picking approvers from ECC and approvers are picked correctly using BBP_WFL_APPROV_BADI and displayed. Here the problem is , when we change the PO in SRM and check the approval preview before we click order. approval
-
I have a custom portlet in .net on the portal home page for calendar. At the bottom of it , we have different custom portlet for posting the company photos. When we click on the next month in the calendar portlet, the portlet(Company photos porlet) b
-
AIX 5L's HACMP on Database Servers
Hello everyone, I've been looking around for information on a 4 node SAP ERP/Oracle RAC architecture for AIX 5L and I'm being constantly lead to vendors being responsible for the clustering requirements. I'm trying to setup a 4-server ERP architectur
-
Javahelp problem!!!
Hello! I have a big problem while trying to load the help in the application! I use javahelp 2.0 I imported the javax.help and i am trying to load the help. I run the Help Set file with hsviewer.jar from javahelp and load the help fine. I want to loa