How to recover default presets

Hello,
I deleted the Black & White preset and want it back. How can I do that?
I tried deleting user preferences and even reinstall aperture as indicated in link below but nothing is working
http://support.apple.com/kb/ht3805
So if anyone has a suggestion It would be greatly apreciated. Or maybe someone has a link so I can import the default Black & White preset that comes with aperture.
Regards,
Antonio

Antonio,
try Frank Caggiano's user tip:
                 Recovering Adjustment Presets
Regars
Léonie

Similar Messages

  • How to set default preset for Save for Web

    Following the demise of my laptop, I have installed PSE8 (Windows) on my new one.
    On my old machine, the default preset for Save for Web was JPEG High
    On the new installation, the default is GIF and you have to manually scroll through the presets every time to apply the JPEG High preset.
    Is it possible to change the default preset.  If so, how.
    Thank you

    That faq from John R Ellis has not been updated, but may be useful:
    Photoshop Elements 6/7/8 Frequently Asked Questions (FAQ)

  • How to get default presets to the left panel

    I finally installed lightroom 3 after many, many months of it sitting on my desk.  I have been watching tutorials, and playing around with it, and I have found that the default presets are only on the right side panel in library.  On the left panel in develop the heading presets shows up but when I click on the triangle nothing shows up under them.  I did see a question already on here to right click on the heading and check it which I did a few times just to see if it would work and nothing.  This is very frustrating because I have to click on each preset and undo it if I don't like it.  Please help.

    Hello!
    When I left clicked in the spot shown below,
    This field is shown (shown below). As you can see the preset menu is checked, thus the presets being shown.
    Is this what you are referring to? when you left click nothing is shown, and nothing is listed under presets?
    janelle

  • IdeaPad S10e, How to recover default resolution?

    I opened "Intel Graphics Media Accelerator Driver For Mobile". Then I adjusted some resolution because I was adding some USB TV tuner to the computer and when the application was started, the application told I should choose resolution 800x600 or better. When I chose this, I found out the windows does not fit into the screen anymore. Now the problem is that the default resolution for this laptop can not be recovered anymore. How can it be done? 
    Message Edited by justjuha on 07-02-2009 11:18 AM

    Hi
    I got one Ideapad S10 but SetS10e.exe and setxga.exe on the desktop utility does not work. Have you any idea?
    beegee wrote:
    They've created a resolution workaround for the S10e's being used in NSW (Australia) schools so that the adobe products will run. The driver/application is installed to program files/desktop/utilities with shortcuts on the desktop - works well for all changes, they are labelled as SetS10e and setxga, both are 52Kb in size. The details list the copyright as Lenovo 2007 with modifications in April 2009, version 1.0.0.1.
    It might be worth asking for them.
    beegee wrote:
    They've created a resolution workaround for the S10e's being used in NSW (Australia) schools so that the adobe products will run. The driver/application is installed to program files/desktop/utilities with shortcuts on the desktop - works well for all changes, they are labelled as SetS10e and setxga, both are 52Kb in size. The details list the copyright as Lenovo 2007 with modifications in April 2009, version 1.0.0.1.
    It might be worth asking for them.

  • How to recover a Yoga tablet 2 with Windows 8.1

    How to : Recover a Yoga tablet 2 version with Windows 8.1 Bing 
    In case of emergency, if you need this option , or other circumstances ... last hope ..  
    ..works without keyboard ...
    Yoga tab 2 as tablet itself ...equipped with three manual function buttons ,means not so many possible options left ... 
    Front  Yoga Tablet 2 10" version with Windows 8.1
    Shows micro HDMI and headphone out Yoga Tablet 2 10" version with Windows 8.1
    Shows volume rockers and thumb on/off button
    first step keep in mind that your batteryis near fully charged, otherwise plug-in
    save your personal data on a cloud or microsdhc card. ..thats for save...
    Ok...lets go.... push the volume rocker up hold them and press the round button on three seconds.
    the  yoga tab 2 will start up and show the lenovo logo...
     a few seconds later this should be shown ...  
    novo menu
    Normal Startup
    BIOS Setup
    Boot Menu
    System Recovery
    simply touch System Recovery
    that will load the recovery envirement after the break ...
    a few seconds later the yoga screen turns into blue colour
    Choose an option
    Continue  (Exit and continue to Windows 8.1) 
    Use a device (Use a USB drive , network connection or Windows recovery DVD)
    Troubleshoot (Refresh or reset your PC , or use advanced tools) 
    Turn off your PC
    the right way to go is  Troubleshoot ... so give a big five to Troubleshoot... (a soft touch please )
    ...next screen is Troubleshoot...with these options
    Troubleshoot
    Refresh your PC
    If your PC isnt running well, you can refresh it without loosing your files
    Reset your PC
    If you want to remove all of your files you can reset your PC completely
    Advanced options
     touch Reset your PC
    will show this on your Yoga tab 2 .... 
    Here´s what will happen
    * All your personal files and applications will be removed
    * Your PC settings will be restored to their defaults
    touch  Next , after another start or cancel option... the recovery envirement need around an hour to recover ...
    tip toe tip toe ... walking around the block with your pet ... talk with your neighbour ... or something else ..
    Bing, Bong : time is up and your yoga is complete factory restored , so you can startin your yoga tab 2 from a scratch that welcomes you with windows welcome screen, touch it to set up your personal data and so on..
    Thinkies 2x X200s/X301 8GB 256GB SSD @ Win 7 64
    Ideas Centre A520 ,Yoga 2 256GB SSD,Yoga 2 tablet @ Win 8.1

    Excellent tip, K!
    Community Advocate Program Manager
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • How to recover a deleted document library webpart with files in it?

    Hi, 
    I accidentally deleted a document library webpart with folders and files in it. Can someone help how to recover it? What do you think happens to the files? I checked the recycle bin, there is no any deleted file related to the missing files. When I checked
    the Site Content and Structure, I can find the folders yet cant see the files in it. It gives a message that says "Object reference not set to an instance of an object". 
    Please guide. 
    thanks alot,

    Albert, 
    Follow these steps:
    1) open page: https://your_pormal/Lists/YOUR_LIST_NAME/AllItems.aspx
    2) open page in edit mode -> add webpart -> find your list in available webparts -> add
    3) click on the ribbon Stop Editing (Page tab)
    4) Now you try open library from Site Content. 
    But your webpart will looks not like a when a library was created:
    Now follow these steps:
    1) Open library settings
    2) click Create View
    3) Select Standard View (don't select All Items from view templates)
    4) Name it (for example MyAllItems)
    4) Check: Make this the default view
    5) Check: Title (linked to item with edit menu)
    6) Click Save button
    7) Now you have new View (with new address)
    8) Open page https://your_pormal/Lists/YOUR_LIST_NAME/AllItems.aspx
    9) Open it in edit mode
    10) Open list webpart in edit mode
    11) Set Selected View to MyAllItems
    12) Toolbar Type to Full Toolbar
    13) Click OK (after this step it may still showed in "wrong" style)
    14) Click on the Page tap - Stop Editing
    15) Check result ;)
    [custom.development]

  • How to recover from bad development of masterhead or layout or nav panel

    Hi all:
          I begin to modify framework of our portal,  but I am new to it, my question is how to recover from bad development of masterhead or layout or nav panel, there is error in my development.
    thank you very much for your reply

    Hi,
    ARe you able to access Content admin and system admin from your portal now?
    What is the error its occuring.
    Try to modify the rule collection to point to default desktop.
    Best Wishes
    Idhaya R

  • How to recover TNSNAMES.ORA file

    Hi, im using Oracle 8i 8.16 database running on win2k server. Im getting a an error whenever i try to connect to the databese using the DBA Studio program - the error was "ORA-12154:TNS:Could Not resolve service name". I noticed that the TNSNAMES.ORA file is blank in the home directory of Oracle8i, anyone knows how to recover the file?.
    Thanks
    regards
    Muraly

    Hi Friend,
    Thanks alot for ur reply, i tried the solution u gave in ur reply and i manage to get some parameters setting in my tnsnames.ora file - the content of it was
    as follows :
    # TNSNAMES.ORA Network Configuration File: C:\Oracle\Ora81\NETWORK\ADMIN\tnsnames.ora
    # Generated by Oracle configuration tools.
    COGENT =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = TCP)(HOST = cogent-w2ksvr)(PORT = 1521))
    (CONNECT_DATA =
    (SERVICE_NAME = cogent)
    but then i keep getting the same error message.
    I notice that the Oracle service (undet the NT services) OracleOraHome81ManagementServer does not get started - when i try to manually start it up - NT return error saying its not startable due to windows error or application error.
    The following is my setting from net8 assistant.
    Service Naming
    ---- Service Identification ----
    Service name = cogent
    SID = ""
    connection type = Database Default
    Address Config
    Protocol = TCP/IP
    Hostname = cogent-w2ksvr
    Port Number = 1521
    My domain name is cogentconsulting.com
    My Full computer name is cogent-w2ksvr.cogentconsulting.com
    I really appreciate your help in this.
    thanks and regards
    Muraly
    null

  • Set a Metadata Default Preset in LR3?

    I'm wondering if there is a way to set ONE "custom" preset to be the default metadata for all time - applied to every single image ever brought into LR3?
    I want to use these to help © my work and leave embedded contact information in the files - but it is a big pain to have to do it manually for every time I import files - also something I don't always remember to do all the time.
    I don't ever need different presets - just one main one.  As it stands it comes up as "NONE".    I'm stumped as to where one sets a default meta preset.  Within the preset editor -  the program preferences - nowhere that I can find.

    But I'm not aware of any place where one can set it to a default preset - so that it requires NO adjustment/setting - and no manual attention ever again
    If you set it in Import, it's remembered for future import sessions. How more much persistent than this should but be?
    Every time a new catalog is made.
    And it is valid for all catalogs.

  • Safari doesn't work anymore  on my iPad- it hangs completely. Anyone knows how to recover?

    Safari doesn't work anymore  on my iPad- it hangs completely. Anyone knows how to recover?

    Repeated to another user:
    I have had the same issue since the release of iOS7. I even went as far as a factory reset of my iPad 2 and did not restore from any backup. Safari still will not load any pages. It hangs then stops.
    I have tried the steps above so please don't repeat them. I refuse to believe I am the only person on the planet that cannot get a resolution for this? 
    Please, somebody, help me fix this. It's extremely annoying that the default browser cannot be change yet will not work.
    DB

  • Default presets

    I have just installed Lightroom 3 and cannot see the default presets in the Develop modu
    le although I can see a folder on my computer where the presets are sitting. How can I get them to be displayed in the
    system as I am developing my photos?

    When in the develop mode the various tools are on the right hand side of the screen, the settings there are what the default develop settings for the particular file are until you change them. If you look on the right side of the screen the history panel will show any changes made on import, so if you applied a preset on import it will show here.
    If you have accidental turned of any panels you can reactivate them from the window menu.
    Best to check out the help link from LR for the basics of how LR works, the Five Rules will give you a quick tour of the panels.

  • HT1222 how to recover my ipad?

    how to recover my ipad?
    i have connected to itnes but always prompted that ipad is in recovery mode

    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • How to recover Restrictions passcode

    Hi I accidentally locked my restrictions with a passcode and I don't know how to recover I tried so much things and it is not working I just need it back I tried a lot but nothing works and I don't want to restore it to factory settings please tell me a way to get out of this thing easily or whatever it takes and please tell does it effect your youtube which is running on VPN thnx I hope I get a answer

    Remove restriction passcode
    1. Restore to Factory Default
    http://support.apple.com/kb/HT1414
    2. You can restore from a backup that was done before you enable the Restriction Code.

  • How to recover an icloud calendar that has been deleted

    I accidently deleted my default calendar in icloud. Any answers on how to recover? Could I restore my iphone to get it back?

    MrXXXXXXX wrote:
    Ok-my iphones last backup was at 7am before I deleted calendar. Should I turn off my computers calendars from internet then do iphone backup.
    I asked for you to post in the iPhone forum because the most knowledgeable of the iPhone Guru's are there. I am not sure of the best way to recover (I use backups, the easy way) so will not suggest how.
    Until you do have a procedure to follow DO NOT allow the iPhone to connect, turn WiFi and Mobile Data off, the only copy of your calendar is on that phone.

  • [SOLUTION] How to recover a Yoga tablet 2 with Windows 8.1

    Moderator comment: Thread rearranged slightly to allow KalvinKlein's post to be marked as a solution. Regards.

    How to : Recover a Yoga tablet 2 version with Windows 8.1 Bing 
    In case of emergency, if you need this option , or other circumstances ... last hope ..  
    ..works without keyboard ...
    Yoga tab 2 as tablet itself ...equipped with three manual function buttons ,means not so many possible options left ... 
    Front  Yoga Tablet 2 10" version with Windows 8.1
    Shows micro HDMI and headphone out Yoga Tablet 2 10" version with Windows 8.1
    Shows volume rockers and thumb on/off button
    first step keep in mind that your batteryis near fully charged, otherwise plug-in
    save your personal data on a cloud or microsdhc card. ..thats for save...
    Ok...lets go.... push the volume rocker up hold them and press the round button on three seconds.
    the  yoga tab 2 will start up and show the lenovo logo...
     a few seconds later this should be shown ...  
    novo menu
    Normal Startup
    BIOS Setup
    Boot Menu
    System Recovery
    simply touch System Recovery
    that will load the recovery envirement after the break ...
    a few seconds later the yoga screen turns into blue colour
    Choose an option
    Continue  (Exit and continue to Windows 8.1) 
    Use a device (Use a USB drive , network connection or Windows recovery DVD)
    Troubleshoot (Refresh or reset your PC , or use advanced tools) 
    Turn off your PC
    the right way to go is  Troubleshoot ... so give a big five to Troubleshoot... (a soft touch please )
    ...next screen is Troubleshoot...with these options
    Troubleshoot
    Refresh your PC
    If your PC isnt running well, you can refresh it without loosing your files
    Reset your PC
    If you want to remove all of your files you can reset your PC completely
    Advanced options
     touch Reset your PC
    will show this on your Yoga tab 2 .... 
    Here´s what will happen
    * All your personal files and applications will be removed
    * Your PC settings will be restored to their defaults
    touch  Next , after another start or cancel option... the recovery envirement need around an hour to recover ...
    tip toe tip toe ... walking around the block with your pet ... talk with your neighbour ... or something else ..
    Bing, Bong : time is up and your yoga is complete factory restored , so you can startin your yoga tab 2 from a scratch that welcomes you with windows welcome screen, touch it to set up your personal data and so on..
     

Maybe you are looking for

  • How to overcome the Memory leakage issue in crystal report 2008 SP2 setup.

    I have developed the small windows based application tool with help of  Visual studio 2008 for identify the memory consumption of crystal report object. It helps to load the crystal report objects in the memory and then released the object from the m

  • DROID X 3G MOBILE HOTSPOT

    Ok here is my question's: How do i get my 3G Mobile Hotspot since im on a prepaid plan? Is it just $20 month only or more? Do i need to call 611 to get it turned on or what? I actually just got an upgrade so thts why im asking.....HELP VERIZON!!!!!!!

  • Duplicate calendar events with iCloud

    I would like to use icloud for my calendar on my iphone and mac desktop.  When I turn this calendar on though it duplicates all the events on my desktop and iphone too.  Any suggestions how to use it without having everything duplicate?

  • Customize Report with Hierarchies

    Hi all, I have created a report using BEx Query 7.0 which contains Cost Center with drilled down Hierarchies (0COSTCENTER) and Cost Element with drill down Hierarchies(0COSTELMT) Example ; CC1      CC1.1 --> CE1 CC1.1 --> CE2 CC1.2 --> CE3 CC1.2 -->

  • OSB business services slow after upgrade

    Hi all! After upgrading development environment to wls 10.3.6 + OSB 11.1.1.6 I noticed, that proxy services are executing notably slower (instead of 100ms, it is now about 4-5 seconds). After some investigation, I found out that all this time is taki