HOW TO RECOVER FORMS 6I .FMB FILE

I TRY TO OPEN FORM IN FORM BUILDERS AND IT GIVES ERROR.
FRM-10043: Cannot open file
IT HAPPENED DUE TO SOME NETWORK PROBLEM, I HAD TO END TASK FORM BUILDER CUZ IT WAS HAULTED.
NEXT TIME I OPEN MY FORM MODULE AND IT WAS CORRUPTED.
PLESAE ADVISE SOME WAY TO RECOVER MY FORM MODULE.
THANKS
ASLAM

Please do not use CapsLock when typing messages. It makes it hard to read and is considered screaming/shouting on the internet.
It appears the FMB is corrupted. If you don't have a previous version available, you might give it a try by converting the FMB to FMT or XML and then back to FMB.
The benefit of FMT and XML files is that they are plain ASCII so you could go in with a text editor and hack whatever you like. You could try to fix or remove the corrupted part(s).
See your online Forms help on how to convert a FMB to FMT or to convert a FMB to XML. I don;t have access to my development machine right now, so I can't test for you. I think the FMB-FMT conversion is under the File > Administration menu in Forms Builder. Converting to XML has to be done on the command line.

Similar Messages

How to recover missing index.html files

How to recover required index.html files in Pages?

http://www.freeforum101.com/iworktipsntrick/viewtopic.php?t=308&mforum=iworktips ntrick
Peter

How to recover vm host os file system (e.g / ,/boot )

how to recover vm host os file system (e.g / ,/boot ) from the destroy os ,at the same time ,it dosen't impact other image

Anybody knows if the source code of scadm tool is available somewhere ? (opensolaris etc. ?)
I don't have any additional advice to offer other than asking that you to try the flash-update all over again,
one more time, as if it were the beginning again.Yes but how because the SC is not discovered anymore by Solaris :
"rmclomv: WARNING: DP_GET_SDP_VERSION failed, ret=4"
"The SC hardware could not be initialized."
Can you try to flash the mainalomfw ? Your log contained only the flash of the alombootfw !
/usr/platform/`uname -i`/sbin/scadm download alommainfw
I guess jumper JP2 allows to recover from a failed flash by selecting the un-touched half the PROM.It does not work as the SC is not responding anymore to Solaris
Sun Microsystems Inc. SunOS 5.10 Generic January 2005
v210:~#
v210:~# cd /usr/platform/`uname -i`/lib/images
v210:/usr/platform/SUNW,Sun-Fire-V210/lib/images# /usr/platform/`uname -i`/sbin/scadm download alommainfw
scadm: The SC hardware could not be initialized.
v210:/usr/platform/SUNW,Sun-Fire-V210/lib/images#
ERROR: ERROR: Unable to open the SC device.
It's a pitty that obtaining OBP/ALOM updates requires a service contract. I got a V210 recently.
Unfortunately both OBP and ALOM are the intial release 4.8.2 / 1.0.I agree but it's probably also because you need support in case it fails ;-)
Thanks for your answers!

How to recover Nikon NEF photo files?

How to recover Nikon NEF photo files?How to recover Nikon NEF photo files with free data recovery software - MiniTool
Power Data Recovery. Recover Nikon NEF photo files you can with MiniTool Power Data Recovery.

Hi,
I think the issue is related to a third-party software. You need to ask for help from the vendor of the third-party software .
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

How to run form 10g fmx file..

Hi Everyone,
This is my first post in forums
I have a problem
In the run time xyz.fmb file create a xyz.fmx file
after that i cannot run this xyz.fmx file without using Developer
Can anybody give me this solution how can i solve it
Please please...
Give it step by step...

hi
please modify formsweb.cfg and create u r own config.something like this.
Example Named Configuration Section
# Example 1: configuration to run forms in a separate browser window with
# "generic" look and feel (include "config=sepwin" in the URL)
# You may define your own specific, named configurations (sets of parameters)
# by adding special sections as illustrated in the following examples.
# Note that you need only specify the parameters you want to change. The
# default values (defined above) will be used for all other parameters.
# Use of a specific configuration can be requested by including the text
# "config=<your_config_name>" in the query string of the URL used to run
# a form. For example, to use the sepwin configuration, your could issue
# a URL like "http://myhost.mydomain.com/servlet/f90servlet?config=sepwin".
[CONFIG]
form=login.fmx
separateFrame=True
lookandfeel=oraclesarah

How to recover lost folders and files - Pls help, help...

Some days ago I lost all of my 15 GB folders and files that stored in my Macbook Pro hard drive called DATA. I brought my Macbook pro to an experienced computer tecnicians who providing data recovery services. To his and my suprise, after checking, scanning it a few hours, he said their is no way to recover because he did not find any trails at all. The computer still seems working properly - I have no problem with any applications. There are few other folders in the DATA hard disk containing pictures, computer programs still remain. These lost folders and files contain mainly documents (word, excel, power point, pdf etc) which I accumulated in my many years working !!!!. I did not make a back up since last September partly because I think Mac is very safe.
The computer with me all the time on that day and only my son used Power Point to make a simple presentation on that evening - he can not save it on the folders the he normally use - All the folders and files are gone.
I will appreciate it very much if any of you can tell me what would be the possible causes and more importanly how to recover the lost folders and files. They are very very valuable to me.
Many thanks for your kind attention
Loimekong from Vietnam
Macbook Pro 2.4 Ghz
Intel Core 2 Duo
4 GB 1067 MhZ DDR3

First, did the data actually get deleted, or is it still there somewhere? Try searching the drive for some of the documents, perhaps it's all just in another folder on that drive.
If it's truly gone, it's impossible for us to say what might have happened to make it unrecoverable. Perhaps someone using the computer used Secure Empty Trash, or securely erased empty space on the hard drive. Perhaps it was overwritten by other stuff before you noticed. It's possible the hard drive is starting to fail, though this seems like an awfully specific problem for that to be the issue.
Or perhaps the tech you took the computer to didn't know what he was doing. Why not try recovering what you can on your own? See Recovering deleted files.
You should be aware that no computer is safe. All computers rely on hardware that may fail and software that can have bugs. You absolutely MUST maintain a good set of frequently-updated backups... no fewer than two full backups of anything you don't want to lose.
(Note that my pages contain links to other pages that promote my services, and this should not be taken as an endorsement of my services by Apple.)

How to recover datafile.when control file auto backup is off

hi friend
i took hot backup of my database using following command
rman>backup database;
in my case controlfile auto backup is off.
and i have lost my all controlfiles as well as datafiles except spfile.
i have recovered control file using dbms_backup_restore package.
know i am able to mount database using following command
rman> startup mount;
when i wrote following command
rman> restore database;
i got following error
RMAN-06023: no backup or copy of datafile name found to restore
enven i have backup of datbase.
can anybody tell me how to recover datafiles in this case.
thanking you
sohail

hi,
I think you might have a problem here as the error from RMAN is described in the following metalink note
Doc ID: Note:100565.1
You should change you backup script to be something like
rman {
backup database include current controlfile;
do you have any earlier backups of your database?
regards
Alan

How to recover a deleted numbers file in icloud

How do I recover a deleted numbers file that was saved in icloud
Can files be saved on Mac and I cloud at the same time

Use your back up/Time Machine to look inside the user library > mobile Documents folder.

How to recover database without archive files

Hello,
I've a test database without archive files and I need to know how to recover it without using archive files.
What is SQL command to recover database wthout archives?
Thanks in advance for your help.
Regards,
Carles

There are serveral information missing in this posting and as a support personnel, I would like to find out more when I see postings like this.
1. This person wants to "Test" his backup and recovery in NOARCHIVELOG mode.
2. He/She did not say his database had already crashed or had a problem.
3. He/She did not give any indication the kind of scenario he wants to recover from.
4. He/She did not mention the state of his database at the time of he posting.
5. He/She did not mention the Release of his Oracle Server or Platform.
6. He/She did not mention the type of backup he already has in place (although provided later as Full COLD Backup). How "genuine" is the back?
7. What actions has already been taken to attempt recovery.
In my support experience, I normally would go through a list of questions witht he use/client to get the full picture of the current status of the database before I give answers that would worsen situations, especially in a Disaster Recovery sitaution.
Personaly, I would suggest you have a look at the list above. One of the most important is number 3 (The Recovery Scenario), then number 4, number 6 and 7. Number 7 will determine the situation of your database. So, when you ask for SQL commands to use, there are different commands for different kind of recovery depending on what has gone wrong or what kind of file is damaged (Datafiles, Logfiles, Control Files, one tablespace, one table, entire database gone, etc).

How to recover deleted back-up file(s) from iTunes?

I'm needing to figure out a way to recover back-up files that iTunes removed during the recent install to the update 11.0.1.
I went to back up my phone manually. (Which I've been doing for years) I've never used or enabled auto-sync. Before I start a back-up I re-name my phone in a format like this "iPhone0913" This is to eliminate any confusion. That iTunes might try to interpet as, a duplication of another back-up file. By it having the same name (Which I know it won't but I do it anyway) Before the installation of the new update. I had 8 back-up files all dated and in order with the name designation that I've proivded. For example: 1. iPhone0105 2, iPhone1106 etc. as the numeric designation is for the month and year. So Oct. 2005 was my oldest back up file.
Once the installation/update took place, I plugged my phone in and clicked on back-up to this computer. All was moving along as it should, since this was only a back-up. Not a back-up and restore!! At any rate, I went through iTunes to verify that the back-up was there. (As I always do) And low and behold.. GONE!!
The only back up that was showing, was the back-up of "iPhone0913" I did'nt go into panic mode at that point. Thinking that maybe iTunes moved or maybe archive the back-ups. I was trying to remain optimistic, but I knew there was'nt much that could be down. But maybe, I'm missing something.. I was able to locate 4 of 8 back up files. Only because I had backed them up from another drive.
I don't have Windows System Restore, enabled, So I was'nt able to recover that way. I'm still beside myself that this even took place.
At this point, I'm looking for any recommendations, sympathy.
Thanks in Advance for your help and support!

Get Back and recover Iphone Lost Contacts,Messages,Photos from iOS devices iPhone, iPad, iPod
You can use a iPhone Files recovery tool to recover all iphone data,it is the an all-in-one iPhone/iPad/iPod Data Recovery software for personal users that can recover data directly from iPhone, iPad and iPod Touch, including contacts, photos, videos, SMS, iMessages, call history, notes, reminders, voice memos, etc., as well as recover data from iTunes backup file.
There are 2 solutions to recover recover iphone ipad ipod lost dat--recover iphone SMS messages,Contacts,Photos,Videos,App,calendar, notes, call history and more.
1.Recover data from iOS Device
Scan iOS device directly to find data deleted recently,or data lost due to inaccessible iOS,download the right version for your iPhone 4 (GSM & CDMA), iPhone 3GS, iPad 1 or iPod touch 4.
2.Recover from iTunes Backup File
Scan iTunes backup files if you deleted data for a long time,failed to recover from iOS device directly,or lost iOS device,Recover data for any iOS device like iPhone 4S, iPhone 5, etc.By extracting the previous iTunes backup with any version of the software. It supports the newest iOS 6 when you use this recovery mode!

How to recover password Protected PDF Files

Hi ALL,
DO we have an option to recover password protected pdf files locked with acrobat.I didnt remember password's of some of my old pdf files
Thanks,
Mark
http://infopeer.com

I would just ask the 3rd party that created the PDF if they could supply unencrypted files. If there is some reason they will not, I am surprised that they have not restricted printing. Normally when Acrobat security is set, you can not print to a new PDF, even if printing is allowed. One option is to provide the ID and password to the other folks who need to review the PDFs. On the surface, there seems to be a license issue with what you are trying to do and you may need to be careful that the company is not at risk. That is why I am suggesting to coordinate with the 3rd party.
Sorry. I don't have a solution but just the statement of concern.

How to recover database from .mdf file

create a database of
equal size to the one you're trying to attach
shutdown the server (Stop)
swap in the old mdf file (replace new .mdf file with .mdf file to be recovered )
Location: C:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\DATA
bring up the server (start) and let the database attempt to be recovered and then go into suspect mode
put the database into emergency mode with ALTER DATABASE
run DBCC CHECKDB (dbname, REPAIR_ALLOW_DATA_LOSS) which will rebuild the log and run full repair
Your database will be available again but you'll have lost data and the data won't be transactionally consistent
USE [master]
GO
ALTER DATABASE [RdmStoreInformation] SET EMERGENCY
GO
ALTER DATABASE [RdmStoreInformation] SET SINGLE_USER
GO
DBCC CHECKDB ([RdmStoreInformation], REPAIR_ALLOW_DATA_LOSS)
GO
ALTER DATABASE [RdmStoreInformation] SET MULTI_USER
GO
ALTER DATABASE [RdmStoreInformation] SET ONLINE
GO
This is a issue I had to fix and it's solution listed here for your reference(I gathered all the In-formations by surfing web)

Interesting, did you get any errors trying to attach the .mdf file?
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence

Need a help: how to recover using backup control file?

Please a help:
First computer
1. I create a database
2. put it in archive mode,
3. shutdown and made a cold backup
4. Created backup control file (alter database backup control file to trace)
5. I started up and created some archived log files.
Second Computer
1. I copied all files created in the step 3 above except the control file
2. I create all the same map directory on the 2nd computer as in the 1st computer
3. I recreate the control file from the script got in the step 4 above
4. I Copy archived log files generated at the step 5 in the local directory in the second computer
5. I set the logsource and set the autorecovery to on
6. I recover the database: RECOVER DATABASE USING BACKUP CONTROL FILE UNTIL CANCEL
Error got:
the archived log file applied do not go beyond the first one?,How could I do to applied all archived log files copied from the first computer to the second computer to have the same data?
Thank you very much

archived log sequeces in the first computerSQL> select sequence#,first_change#,next_change# from v$log_history;
SEQUENCE# FIRST_CHANGE# NEXT_CHANGE#
1 553723 555484
2 555484 557345
Actions I did in the second Computer(after copied the former two archived log files from the 1st computer)
SQL> CREATE CONTROLFILE REUSE DATABASE "ORCL" RESETLOGS ARCHIVELOG
2 MAXLOGFILES 16
3 MAXLOGMEMBERS 3
4 MAXDATAFILES 100
5 MAXINSTANCES 8
6 MAXLOGHISTORY 292
7 LOGFILE
8 GROUP 1 'C:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\REDO01.LOG' SIZE 50M,
9 GROUP 2 'C:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\REDO02.LOG' SIZE 50M,
10 GROUP 3 'C:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\REDO03.LOG' SIZE 50M
11 -- STANDBY LOGFILE
12 DATAFILE
13 'C:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\SYSTEM01.DBF',
14 'C:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\UNDOTBS01.DBF',
15 'C:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\SYSAUX01.DBF',
16 'C:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\USERS01.DBF'
17 CHARACTER SET WE8ISO8859P1
18 ;
Control file created.
SQL> archive log list;
Database log mode Archive Mode
Automatic archival Disabled
Archive destination USE_DB_RECOVERY_FILE_DEST
Oldest online log sequence 0
Next log sequence to archive 0
Current log sequence 0
SQL> alter database archivelog;
Database altered.
SQL> set logsource C:\local_destination1_orcl
SQL> set autorecovery on;
SQL> recover database using backup controlfile until cancel;
ORA-00279: change 555611 generated at 01/18/2007 14:14:14 needed for thread 1
ORA-00289: suggestion :
C:\LOCAL_DESTINATION1_ORCL\ARCH.1_1_612194518_43F17CF5.ARC
ORA-00280: change 555611 for thread 1 is in sequence #1
ORA-00328: archived log ends at change 555483, need later change 555611
ORA-00334: archived log:
'C:\LOCAL_DESTINATION1_ORCL\ARCH.1_1_612194518_43F17CF5.ARC'
Idon't know where the change 555611 is coming from?

How to recover data from .bkf files made when os was XP Proffesional into the system when it is windows7

Hello Sir/Madam,
Previously I was using Microsoft Wndows XP Professional,with version: 5.1.2600 Service Pack 3 Build 2600.
I took .bkf files by using the Backup utility (i.e. Start -> All Programs -> Accessories -> System Tools and then click Backup)
And paste it to my external hard disk.
Then I used OS :Microsoft Windows 7 Professional(Version 6.1.7600 Build 7600).I formated my system deleted all the partitions and created new partions and installed Windows 7.
Now I have the .bfk files in my external hard disk and I want to recover my data from that .bfk files made from xp-sp3 pc to windows 7.
Plz help me.....
I downloaded Windows NT Backup - Restore Utility and tried to install NtBackupRestore_x86.msi .But it will not installed in Windows 7 with a message that this requires Removable Storage Management. Since RSM is not included in Windows 7 how does
one access old Backups from Windows XP?
Will the NtBackupRestore program be updated to be compatible with Windows 7? plz help................................

Yes, you need to first install Removable Storage Management software before installing NT-Backup.exe in Windows 7. To know more about restoring backup file, you can read this post: http://belanalavade.blog.com/2014/04/15/how-to-repair-damaged-bkf-file/
Berdooook
No. You do not need to install Removable Storage Management in Windows 7 to read NT backups!
You go to http://support.microsoft.com/kb/974674 and download the package for Windows 7 that Microsoft has published specifically for this!
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

How to recover physically lost redolog files -11g

Hi All
One of my Development databases lost all the redologs physically( 3 members were in same location) and i have 6th June full RMAN Backup. I could find errors since yesterday about 2 PM in alert log as follows
Thu Jun 09 14:36:15 2011
Errors in file /data01/app/oracle/diag/rdbms/ndsd/ndsd/trace/ndsd_arc3_15667.trc:
ORA-00313: open failed for members of log group 2 of thread 1
ORA-00312: online log 2 thread 1: '/data03/oradata/ndsd/redo/redo02.log'
ORA-27037: unable to obtain file status
Linux-x86_64 Error: 2: No such file or directory
But there were changes done to the database up to yesterday 4 PM and need to recover completely.
Appriciate if some one can advice me on this issue
Regards
Karunika

user9016606 wrote:
I could recover the database and thank youGood. Now that you've put out the fire, you need to be finding out how it was you lost all of your redo and make a plan to prevent it from happening again. To that end ..
Let me guess .. since your redo logs were named something dot log, someone was doing some housekeeping and thought there'd be no harm in deleting a log file. Up until 10g, the default names for redo logs was *.rdo. Shortly after my first upgrade to 10g, with the default of *.log, I twice had to recover due to some SA reclaiming space by deleting "log" files. Since then I've continued to name by redo logs *.rdo.
And whether that was the cause or not, I hope you now see why it is strongly recommended that your multiplexed redo logs - the different members of each group - are as physically separate as possible. Ideally, they are on separate physical discs going through separate disk controllers. But at the very minimum they should be in separate directories to at the very least protect you from "rm *.log"

HOW TO RECOVER FORMS 6I .FMB FILE

Similar Messages

Maybe you are looking for