How to recover from a repair DVD?

I created my repair disk on DVD about 6 months ago, without the image, just the repair disk. This is a 2-year old HP desktop Pavillion.
Now I have a brand new drive WD 500GB (original was Seagate 500GB, both SATA) and the repair disk does not work with it. I formatted the new drive using the same desktop from the command prompt using the command Format C:, one NTFS volume 500GB. The repair disk loads fine but none of the options get me to recovery. When I go to the Recovery Manager, all the options are not enabled, and no way to select the recovery options.
What is the problem?

The problem is you needed to create a set of about 3 HP recovery DVD's when you first got your computer. If you still have the original hard drive and it functions properly and you didn't erase or format it, than you could reinstall it and make a set of recovery discs. If it was broke, erased/formatted, or you got rid of it... you will need to order a set of discs from HP.
Frank
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

Similar Messages

  • How to recover from bad development of masterhead or layout or nav panel

    Hi all:
          I begin to modify framework of our portal,  but I am new to it, my question is how to recover from bad development of masterhead or layout or nav panel, there is error in my development.
    thank you very much for your reply

    Hi,
    ARe you able to access Content admin and system admin from your portal now?
    What is the error its occuring.
    Try to modify the rule collection to point to default desktop.
    Best Wishes
    Idhaya R

  • How to recover from disapled ipad

    how to recover from locked ipad after wrong passwored trile

    If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup).
    If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present.
    You may have to force iPad into Recovery Mode
    http://support.apple.com/kb/ht1808

  • How to recover from a bad upgrade due to a blackout, stuck in the recovery itunes screen on the iphone

    how to recover from a bad upgrade, due to a blackout. stuck in the recovery itunes screen on the iphone

    Bjpolinda,
    Do you have a recent iCloud or iTunes backup? If so, just plug your phone into iTunes, restore the phone and bring your backup back by following the prompts on the phone.
    If you didn't back up your phone before attempting to update, you may have lost all your photos and other data on your phone. If you restore the phone through iTunes, it will most definitely wipe your phone of all data and reset it to factory settings.
    Emmons

  • How to recover from Large Volume Table Insert

    We are inserting 1 Million rows into table using ODI IKM Append. If half the way thru the job fails because of tablespace or other issue, how to recover? Does 50% rows are commited to db? What is the best way to handle this type of situation?

    You can have different options for this.. You can commit them in every 1000 rows in the KM.You can also set the dml operation into one transaction and commit the same at the end of step.
    Try to follow load plan for better restart options. If you cann't provide more undo table space then try loading less amount of records lets say 1 to 100,000 and then 100,001 to 200,000 like this which is little bit complex but you have to sacrifice something to overcome the issue.
    I believe you must have data in C$ and I$ step. Hence you process these data instead of loading again from original source. So it depends on you, how you are going to design the total process. You can better judge it. Talk with your dba about this issues as well.
    Thanks
    http://bhabaniranjan.com/

  • In simple steps. How to go from project to DVD

    Ok I have 4 books and live rural... and its all greek... Once I have the project done... how do I get it to DVD in the best quality with the built in systems.
    Just the facts please and thanks

    I don't know what Mac you have. But I assume you have a Superdrive to burn DVDs...
    Then when the FCE HD project is completed:
    - make sure you render all (opt-R) and mixdown the audio (opt-cmd-R)
    - if you want to see chapters in the DVD: set markers in the timeline where you want chapters: open the dialog of each marker (m), write the chapter name and click on botton Add chapter marker.
    - File/Export/QuickTime Movie: select Include: Audio and Video, Markers: Chapter Markers, deselect Make Movie Self-Contained (if selected it takes longer, it uses more disk space, but it makes the movie independent)
    - use iDVD that comes with your Mac (if with Superdrive...) to make the DVD
    - make sure the basic preferences are OK (PAL/NTSC, use Best Quality, etc.)
    - select a Theme you like
    - Import the movie exported from FCE
    - now, it all depends on your willingness to personalize menus and the theme you selected: you can leave the standard menus or you can personalize them.
    - when ready, burn the DVD directly, or better make a Disk Image first: you can check the results on your Mac before real burning (then you must use DiskUtility to burn the image).
    These are the basic and minimal steps: they might seem many but in facts the longest time is the time iDVD takes to prepare the Image itself.
    Obviously there are other options: using other DVD authoring programs, burning on external devices, if you don't have Superdrive, etc.
    But these are the ... facts.
    Piero

  • How to boot from a repairing disk error? Windows 8.1

    Hello, 
    I installed the iCloud yesterday for my iPhone 5s, and then a box popped up saying to restart and so I clicked OK as you do as i needed
    to restart my PC anyway. So it restarted and went into Automatic Repair and now every time i start my computer it goes into this and then goes to a black screen, i need my computer for school and exams so need this sorted pretty quickly. i have read that it
    is a common problem, but i can't seem to get F8 up the only think i can do is go into my motherboard settings and from there i can boot it form my SSD where the boot file is but this just tries to load it and goes to Automatic Repair. i can't get Microsoft
    to help me as i need product identification number which can only be found when you have booted up the computer. Idiots !!!! Please can some one find me a step-by-step guide as I need this sorted quickly as i am in the middle of my exams. Thank you. Zach.

    Hi,
    Apologize for the late reply.
    Do we have a Windows repair disk available? If yes, we may consider to take a system restore from there. We could contact the manufacturer to get a repair disk.
    a) After you boot your computer using Windows DVD or System Repair Disc, a black screen appears with gray text "Press any key to boot from CD or DVD". Press any key.
    b) Select the correct time and Keyboard type.
    c) Click Repair your computer in the lower left corner.
    d) Select Troubleshoot from Choose an option screen.
    e) Click Advanced options in Troubleshoot screen.
    f) Select System Restore.
    ======
    Or take a try to do a selective boot up with bios:
    get cmd to open and check
    bootrec /fixMBR
    bootrec /Fixboot
    bootrec /rebuildBCD
    and also
    chkdsk /r c:
    chkdsk /r d:
    chkdsk /r e:
    chkdsk /r f:
    Hope this may help
    Best regards
    Michael Shao
    TechNet Community Support

  • How to recover from Oracle XA Error Native Error 24776?

    Hello,
    I believe that I have a connection leak somewhere and that an Oracle
    connection is hung.
    I get the following error when trying to access the data source
    getConnection method.
    How can I recover from this? The WL Server console shows 0 connections
    to the connection pool, but obviously some are in there.
    Thanks,
    java.sql.SQLException: XA error: XAER_RMERR : A resource manager error
    has occur
    ed in the transaction branch start() failed on resource 'Oracle Connection
    Pool': XAER_RMERR : A resource manager error has occured in the
    transaction bra
    nch
    javax.transaction.xa.XAException: [BEA][Oracle JDBC Driver]Oracle XA
    Error Occur
    red. Native Error: 24776
    at
    weblogic.jdbcx.oracle.OracleImplXAResource.checkError(Unknown Source)
    at weblogic.jdbcx.oracle.OracleImplXAResource.start(Unknown Source)
    at weblogic.jdbcx.base.BaseXAResource.start(Unknown Source)
    at weblogic.jdbc.jta.DataSource.start(DataSource.java:617)
    at
    weblogic.transaction.internal.XAServerResourceInfo.start(XAServerReso
    urceInfo.java:1075)
    at
    weblogic.transaction.internal.XAServerResourceInfo.xaStart(XAServerRe
    sourceInfo.java:1007)
    at
    weblogic.transaction.internal.XAServerResourceInfo.enlist(XAServerRes
    ourceInfo.java:203)
    at
    weblogic.transaction.internal.ServerTransactionImpl.enlistResource(Se
    rverTransactionImpl.java:419)
    at weblogic.jdbc.jta.DataSource.enlist(DataSource.java:1287)
    at
    weblogic.jdbc.jta.DataSource.refreshXAConnAndEnlist(DataSource.java:1
    250)
    at weblogic.jdbc.jta.DataSource.getConnection(DataSource.java:385)
    at weblogic.jdbc.jta.DataSource.connect(DataSource.java:343)
    at
    weblogic.jdbc.common.internal.RmiDataSource.getConnection(RmiDataSour
    ce.java:305)

    Steven ,
    It's already been answered:
    http://groups.google.com/groups?hl=en&lr=&ie=UTF-8&c2coff=1&threadm=4009ccc9%241%40newsgroups.bea.com&rnum=1&prev=/groups%3Fq%3D24776%2520OracleImplXAResource%26hl%3Den%26lr%3D%26ie%3DUTF-8%26c2coff%3D1%26sa%3DN%26tab%3Dwg
    Regards,
    Slava Imeshev
    "Steven Ostrowski" <[email protected]> wrote in message news:40ce1480$1@mktnews1...
    Hello,
    I believe that I have a connection leak somewhere and that an Oracle
    connection is hung.
    I get the following error when trying to access the data source
    getConnection method.
    How can I recover from this? The WL Server console shows 0 connections
    to the connection pool, but obviously some are in there.
    Thanks,
    java.sql.SQLException: XA error: XAER_RMERR : A resource manager error
    has occur
    ed in the transaction branch start() failed on resource 'Oracle Connection
    Pool': XAER_RMERR : A resource manager error has occured in the
    transaction bra
    nch
    javax.transaction.xa.XAException: [BEA][Oracle JDBC Driver]Oracle XA
    Error Occur
    red. Native Error: 24776
    at
    weblogic.jdbcx.oracle.OracleImplXAResource.checkError(Unknown Source)
    at weblogic.jdbcx.oracle.OracleImplXAResource.start(Unknown Source)
    at weblogic.jdbcx.base.BaseXAResource.start(Unknown Source)
    at weblogic.jdbc.jta.DataSource.start(DataSource.java:617)
    at
    weblogic.transaction.internal.XAServerResourceInfo.start(XAServerReso
    urceInfo.java:1075)
    at
    weblogic.transaction.internal.XAServerResourceInfo.xaStart(XAServerRe
    sourceInfo.java:1007)
    at
    weblogic.transaction.internal.XAServerResourceInfo.enlist(XAServerRes
    ourceInfo.java:203)
    at
    weblogic.transaction.internal.ServerTransactionImpl.enlistResource(Se
    rverTransactionImpl.java:419)
    at weblogic.jdbc.jta.DataSource.enlist(DataSource.java:1287)
    at
    weblogic.jdbc.jta.DataSource.refreshXAConnAndEnlist(DataSource.java:1
    250)
    at weblogic.jdbc.jta.DataSource.getConnection(DataSource.java:385)
    at weblogic.jdbc.jta.DataSource.connect(DataSource.java:343)
    at
    weblogic.jdbc.common.internal.RmiDataSource.getConnection(RmiDataSour
    ce.java:305)
    [att1.html]

  • How to recover from error message 13014

    I am having a problem with launching the itunes from my computer. I consistantly receive the error message 13014 with every attempt. Is there some way I can recover from this error short of wiping the computer clean?

    Repair Permission with Disk Utility.  See if it starts.
    If not, relocate Genius related files in your iTunes Library folder to another folder somewhere.  Test if it starts.

  • How to recover from RTSA71-55P6AU-XD003G-60UM03

    Hello -
    How do I recover from this 'Start Up' error:
    RTSA71-55P6AU-XD003G-60UM03
    When starting up normally or in Safe Mode, it stops frozen and hangs until a hard shutdown is implemented. 
    In safe mode start-up, the process stops at 'atipcie.sys'. 
    Any ideas? 
    - Dub
    Compaq Presario CQ62-220US Notebook
    This question was solved.
    View Solution.

    Hi,
    For software damages, we may be able to recover data but for hardware damages, sometimes very hard to recover data and many times we can't recover at all.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • How to recover from datasource.getConnection hangover

    Hi,
    We have a standalone J2EE application wherein the app tries to restart itself in case of FATAL errors like connection loss etc.
    Database: Oracle10g
    Driver: oracle.jdbc.driver.OracleDriver
    Issue: On error, the service tries to restart itself dueing which it aborts the connection and recreates the connection with datasource.getConnection().
    In some cases during Soak testing, if the database goes down then the application seems to hang on datasource.getConnection() for almost 3 hours and greater.
    Options we tried :
    1. Use OracleDataSource and setLoginTimeout as 10 secs.
    There seems to be no effect on the code. Not sure whether the datasource actually uses the timeout interval.
    2. Use CONNECT_TIMEOUT_LISTENER=10 in listener.ora on the database server.
    Does not seem to resolve the issue. getConnection still hangs.
    Any suggestions what would be the best way to recover from this issue?

    Hi,
    The same should be available in the source system (DEV), Surprising how / why the same is available in BW system.
    I checked the SAP ERP source system to which I have an access and the same is not available in the source system not in the BW system
    My sugession is to go for a generic datasource after identifying the table with the help of functional consultant.
    Regards
    Venkata Devaraj

  • How to recover from formatted disk

    Hi
    I have a problem searched google and feeling very hopeless. Actually i have installed Oracle 8.1.0 on D drive and my Operating System on C drive crashes. I have all files of installed Oracle but now don't know how to recover my DB.
    I have installed OS and Oracle on C drive now but what to do next. PLZ consider me a developer rather DBA.
    Regards
    Bilal

    Here are steps to recover in this type of failures:
    1). install O.S
    2). Install Oracle (software only)
    3). Create Service (in windows case only) using oradim utility
    4). Recover/repair/start database
    --- since you have reinstalled the software and the Oracle_home might have changed, (as said earlier) so in new Oracle home\database folder, copy your pfile/spfile and password file.
    --- make sure all relevant folders are created for dump directories as it is mentioned in pfile/spfile.
    --- startup the database

  • How to recover from network port configuration deletion (airport)

    a couple of years ago, i accidently deleted the network port configuration for AirPort in the Show pop-up menu. No big deal, i thought at the time. I don't have an AirPort card and I won't be using AirPort in this computer. Ok, I now have an old-style AirPort card (powerbook G3 firewire, 10.2.8) and the AirPort utility doesn't see that it's installed. I realized right away, the network doesn't have a port... so the system doesn't see it, right? So, how do I get this port back? Do I have to reload a new System entirely and not save previous network settings... or is there an easier way to recover from my blunder?

    Thanks Rob,
    Glad to be here. Yeah, 10.2 works the same as 10.4. The problem with what you suggest is that I can no longer get airport as an option in Network port configs... so when I go to the new button all the other options are there EXCEPT AirPort. This is what I need to restore. I haven't checked, but I'm assuming I've nuked the pref panel out of the master library. So, I've messed up big time. I was looking for a way to recover that didn't involve reloading the whole system. This isn't like OS 9 and older where you can go and pick a little piece and stick it back into your system folder... I think. Thanks for the reply.

  • How to recover from a Sync command that returns a SyncStatus value 8 (Object not found)

    Hello,
    We are using ActiveSync protocol. We have a situation where our local DB is probably in a invalid state where we do a Sync command passing all of our folders (full sync) and one of the folder (or many) doesn't exist anymore.
    The Sync command result doesn't tell us which folder is invalid.
    But the question is more: how should we recover from this "Object not found" error? Should we erase the local database and do a full refresh?
    Status reference:
    http://msdn.microsoft.com/en-us/library/gg675457(v=exchg.80).aspx
    Thanks
    ArchieCoder

    Sorry, that really isn't a Firefox support issue. Contact a Mac support forum or Mac-users group for advice on to solve that issue.

  • How to boot from OS X DVD after hard drive upgrade with wireless keyboard

    This may be a dumb question. I know that you press "c" key on a MacBook to boot from DVD. But what about a Mac Mini with wireless keyboard? Does the Mini see the keyboard when there is a NEW drive inside?
    I've searched but can't find the answer.
    Thanks!

    I believe This will help.
    It says to Hold "C" while booting to boot from the install DVD.
    Hope this help.

Maybe you are looking for