How to recover from accidental VM role removal in Hyper-V Failover Cluster Manager?

Hello
My VMs are still available in Hyper-V Manager but they are no longer available in Cluster Manager. I am curious if there's a way to move them back into the Failover Cluster Manager while retaining their GUIDs?
I know I can manually create a new VM and add the existing VHD but that process recreates a new GUID causing the VM to regard the stuff I wanted as old.
I have tried to follow
http://blogs.technet.com/b/heyscriptingguy/archive/2013/10/14/recovering-virtual-machines-in-hyper-v-server-2012-r2-part-1.aspx but I am curious if there's a faster way to do this without becoming a scripting genius overnight.
Thanks,
Prince

Thanks for the reply but that does not help.
I am not looking to move my VMs to a remote Host but rather looking to repopulate the fail-over cluster manager with the existing VMs in Hyper-V Manager. In a sense, I am looking to reuse the existing GUID without creating new ones.
Again, my VMs are alive in Hyper-V Manager but are currently not available in Failover Cluster Manager.
Any scripting assistance will be greatly appreciated.
Thanks,
Prince

Similar Messages

How to recover from disapled ipad

how to recover from locked ipad after wrong passwored trile

If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup).
If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present.
You may have to force iPad into Recovery Mode
http://support.apple.com/kb/ht1808

How to recover from bad development of masterhead or layout or nav panel

Hi all:
I begin to modify framework of our portal, but I am new to it, my question is how to recover from bad development of masterhead or layout or nav panel, there is error in my development.
thank you very much for your reply

Hi,
ARe you able to access Content admin and system admin from your portal now?
What is the error its occuring.
Try to modify the rule collection to point to default desktop.
Best Wishes
Idhaya R

How to recover from a bad upgrade due to a blackout, stuck in the recovery itunes screen on the iphone

how to recover from a bad upgrade, due to a blackout. stuck in the recovery itunes screen on the iphone

Bjpolinda,
Do you have a recent iCloud or iTunes backup? If so, just plug your phone into iTunes, restore the phone and bring your backup back by following the prompts on the phone.
If you didn't back up your phone before attempting to update, you may have lost all your photos and other data on your phone. If you restore the phone through iTunes, it will most definitely wipe your phone of all data and reset it to factory settings.
Emmons

Removal of Node from Hyper-V Failover Cluster

Hello All....................I have a 8 node Hyper-V Failover Cluster based on Windows Server 2012 R2. I am facing some issues with one of the servers, so I have decided to take that node out of the Hyper-V Failover cluster. I would appreciate if someone
could share the steps that I should take to ensure smooth removal of node especially with respect to CSV Volume and Quorum. THanks.

Hi Sir ,
Please try the following command (before you do this please live migrate VMs to another nodes ):
Remove-ClusterNode –Name node4 -Force
For this command please refer to :
http://technet.microsoft.com/en-us/library/hh847251.aspx
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Cluster Network 2 is missing from Failover cluster Manager

I have two node Windows 2008 R2 SP1 MS SQL cluster, there was an issue with one node NIC card which was replaced and since then "Cluster Network 2" is not visible in failover cluster manager, also Heartbeat and Public IP nic card of both nodes
are appearing in "Cluster Network 1" container. even though both network public and hearbeat are on differenet subnet, but still cluster detects it as one subnet. Need to know how to bring back "Cluster Network 2"

After replacing NIC, cluster worked fine on other node for couple of days and then cluster services started terminating on both the nodes.
when checked cluster logs found below error.
"ERR [CORE] Node 2: exception caught AlreadyExists(183)' because of 'already exists'(AODBP2DB1 - Local Area Connection)"
Hence to correct this problem, renamed both nodes NIC cards as Public and Private and cluster was started and tested the failover also. but since then only able to see "Cluster Network 1" and all NIC are listed under this container.
Though when looked at cluster validation report, it shows Cluster Network 1 and Cluster Network 2 entries in it
Pasted network section from Cluster Validation report
Network: Cluster Network 1
DHCP Enabled: False
Network Role: Enabled
Prefix
Prefix Length
10.100.18.0
25
Item
Value
Network Interface
Node1 - Public
DHCP Enabled
False
IP Address
10.100.18.11
Prefix Length
25
Item
Value
Network Interface
Node2 - Public
DHCP Enabled
False
IP Address
10.100.18.16
Prefix Length
25
Network: Cluster Network 2
DHCP Enabled: False
Network Role: Internal
Prefix
Prefix Length
10.101.130.0
25
Item
Value
Network Interface
Node1 - Private
DHCP Enabled
False
IP Address
10.101.130.11
Prefix Length
25
Item
Value
Network Interface
Node2 - Private1
DHCP Enabled
False
IP Address
10.101.130.13
Prefix Length
25
Verifying that each cluster network interface within a cluster network is configured with the same IP subnets.
Examining network Cluster Network 1.
Network interface Node1- Public has addresses on all the subnet prefixes of network Cluster Network 1.
Network interface Node2- Public has addresses on all the subnet prefixes of network Cluster Network 1.
Examining network Cluster Network 2.
Network interface Node1- Private has addresses on all the subnet prefixes of network Cluster Network 2.
Network interface Node2- Private1 has addresses on all the subnet prefixes of network Cluster Network 2.
Verifying that, for each cluster network, all adapters are consistently configured with either DHCP or static IP addresses.
Checking DHCP consistency for network: Cluster Network 1. Network DHCP status is disabled.
DHCP status (disabled) for network interface Node1- Public matches network Cluster Network 1.
DHCP status (disabled) for network interface Node2- Public matches network Cluster Network 1.
Checking DHCP consistency for network: Cluster Network 2. Network DHCP status is disabled.
DHCP status (disabled) for network interface Node1- Private matches network Cluster Network 2.
DHCP status (disabled) for network interface Node2- Private1 matches network Cluster Network 2.

2008 R2 SP1 failover cluster, after connect to VM from failover cluster manager console I've get only upper quourter of screen console

Hello :)
I have to ask because this issue is boring me a long time ago :(
From time to time when I connect to virtual machine from failover cluster manager console I've get virtual machine connection screen (console) which is reduced only to upper left quorter of full screen. There is no scroll bar ... If I live migrate
VM to another node (or restart VM on same node) and reconnect, console screen is displayed ok (ie all console screen is visible).
It is happening regardless of OS version installed into guest VM: 2003 R2, 2008 R2, 2012, 2012 R2).
I've check inside VM ( I can see that integration services are installed and running but when I click onto console window with mouse I've get message:
"Virtual Machine Connection
Mouse not captured in Remote Desktop session
The mouse is available in a Remote Desktop session when
integration services are installed in the guest operating
system...."
From SCVMM console I can see that IC version on guest VM is: 6.1.7601.17514
I would like to know what is going on and is there any way how can I detect those situation or even better how to prevent it ?
Thank you for any idea.
Best regards
Nenad

Hi Nenad,
As you mentioned you have tried 2003 R2, 2008 R2, 2012, 2012 R2 guest vm, but all this do not work properly, With Server 2003 platform the 2008r2 Hyper-V the 2003R2 are not
supported, in your case you must update to Windows Server 2003 R2 with Service Pack 2.
Server 2012 as guest vm on 2008r2 you must install the following hot fix:
You cannot run a Windows 8-based or Windows Server 2012-based virtual machine in Windows Server 2008 R2
https://support2.microsoft.com/kb/2744129?wa=wsignin1.0
Server 2012 is the last version of Windows that will be supported as a guest operating system on 2008r2 Hyper-V therefore the 2012r2 guest vm is not supported.
Please use the following command can query all guest vm’s IC version, please compare this problematic vms IC version with functioning vms.
The following powershell command can be used to display the version of integration services installed on all VMs on the Hyper-V host:
PS C:\Users\administrator> get-vm | ft name, IntegrationServicesVersion
Name
IntegrationServicesVersion
TestVM2012
6.2.9200.16433
SQL01
6.2.9200.16433
SQL02
                                  6.2.9200.16433
SCVMM01
6.2.9200.16384
SCVMM02
6.2.9200.16384
I’m glad to be of help to you!
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Ghost VM resources under failover cluster manager roles

Hello, everyone,
I had a Windows 2012 R2 hyper-v host with few VMs running on it. I deployed a second host, and using SC VMM created a failover cluster. Also I added a shared cluster volume and migrated all VMs to the shared storage using SC VMM console. In
the process I also checked the checkbox to make the VM highly available. Everithyng worked fine.
Now when I look in to Failover Cluster Manager console I see some "ghost" vm roles. Their names are correspondend to the names of the running VMs, which I also can see in the console. For example I have vm HDCADC01, there is another
role in the console "SCVMM HDCADC01 Resources", the status is off, settings are empty.
Does anyone knows what are these resources? Is it somekind of glitch during the migration? Is it safe to remove them?
Thank you,
Jamal.

Where should I run this command?
On my VMM server Update-clustervirtualmachineconfiguration command complains that The cluster services is not running.
On the one of hyper-v server, cluster nodes, "get-vm -name hdcadc01" returns "Get-VM : A parameter is invalid. Hyper-V was unable to find a virtual machine with name hdcadc01". The same result is when I used "ghost" resources name.

Moving VMs from Standalone Hyper-V to Hyper-v Failover Cluster

Hello All.................I need to move Virtual Machines from Standalone Hyper-V based on Windows Server 2012 R2 to a Hyper-V Failover Cluster based on Windows Server 2012 R2.
- The VMs OS is Windows Server 2012 R2
- Applications installed on VMs are SCCM, SCOM, SharePoint, etc.
1. I am looking for a Checklist that I can run through and move them. To make sure I do not miss out anything.
2. Would a downtime be required in this scenario while the VM is being moved?
3. What requires special attention in this scenario?

Thanks for the reply.
So, I do not need to do anything and just simply add both the cluster and standalone into VMM and then simply use the Move option. Please, confirm if I have understood it correct.
Yes. But be carefull. First shut down your VM's
if possible and configure them in such a way they don't automatically start. If you install the SCVMM Agent, some Hyper-V related services are restarted, when some VMs start during that process you system may stall. I have seen this multipe times.
There is another dirty option that worked of us perfectly. Export the VMs. Then import those VMs to a local disk on one Hyper-V Server. Refresh the Hyper-V Server and Virtual Machines on that Hyper-V Server. Give it a few minutes. Then do
a Live Migration while at the same time makeing it "Highly Available" by moving it to your CSV. Works flawlessly. DO NOT IMPORT THE VMS TO YOUR CSV, otherwise you can't change it to "Highly Avaiable" unless you have
two CSVs. Importing it straight to a CSV does not make them Highly Available.
Boudewijn Plomp | BPMi Infrastructure & Security
This posting is provided "AS IS" with no warranties, and confers no rights. Please remember, if you see a post that helped you please click "Vote as Helpful", and if it answered your question, please click "Mark as Answer".

How to recover from Large Volume Table Insert

We are inserting 1 Million rows into table using ODI IKM Append. If half the way thru the job fails because of tablespace or other issue, how to recover? Does 50% rows are commited to db? What is the best way to handle this type of situation?

You can have different options for this.. You can commit them in every 1000 rows in the KM.You can also set the dml operation into one transaction and commit the same at the end of step.
Try to follow load plan for better restart options. If you cann't provide more undo table space then try loading less amount of records lets say 1 to 100,000 and then 100,001 to 200,000 like this which is little bit complex but you have to sacrifice something to overcome the issue.
I believe you must have data in C$ and I$ step. Hence you process these data instead of loading again from original source. So it depends on you, how you are going to design the total process. You can better judge it. Talk with your dba about this issues as well.
Thanks
http://bhabaniranjan.com/

HT1212 how to recover from passcode lock

Please help to recover from lock out device disabled after wrong passcode enterred There seems to be not backup avaiable on home PC.

Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
1. iOS- Forgotten passcode or device disabled after entering wrong passcode
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. Restoring iPod touch after forgotten passcode
4. What to Do If You've Forgotten Your iPhone's Passcode
5. iOS- Understanding passcodes
6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
Forgotten Restrictions Passcode Help
You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
Also, see iTunes- Restoring iOS software.

How to recover from Oracle XA Error Native Error 24776?

Hello,
I believe that I have a connection leak somewhere and that an Oracle
connection is hung.
I get the following error when trying to access the data source
getConnection method.
How can I recover from this? The WL Server console shows 0 connections
to the connection pool, but obviously some are in there.
Thanks,
java.sql.SQLException: XA error: XAER_RMERR : A resource manager error
has occur
ed in the transaction branch start() failed on resource 'Oracle Connection
Pool': XAER_RMERR : A resource manager error has occured in the
transaction bra
nch
javax.transaction.xa.XAException: [BEA][Oracle JDBC Driver]Oracle XA
Error Occur
red. Native Error: 24776
at
weblogic.jdbcx.oracle.OracleImplXAResource.checkError(Unknown Source)
at weblogic.jdbcx.oracle.OracleImplXAResource.start(Unknown Source)
at weblogic.jdbcx.base.BaseXAResource.start(Unknown Source)
at weblogic.jdbc.jta.DataSource.start(DataSource.java:617)
at
weblogic.transaction.internal.XAServerResourceInfo.start(XAServerReso
urceInfo.java:1075)
at
weblogic.transaction.internal.XAServerResourceInfo.xaStart(XAServerRe
sourceInfo.java:1007)
at
weblogic.transaction.internal.XAServerResourceInfo.enlist(XAServerRes
ourceInfo.java:203)
at
weblogic.transaction.internal.ServerTransactionImpl.enlistResource(Se
rverTransactionImpl.java:419)
at weblogic.jdbc.jta.DataSource.enlist(DataSource.java:1287)
at
weblogic.jdbc.jta.DataSource.refreshXAConnAndEnlist(DataSource.java:1
250)
at weblogic.jdbc.jta.DataSource.getConnection(DataSource.java:385)
at weblogic.jdbc.jta.DataSource.connect(DataSource.java:343)
at
weblogic.jdbc.common.internal.RmiDataSource.getConnection(RmiDataSour
ce.java:305)

Steven ,
It's already been answered:
http://groups.google.com/groups?hl=en&lr=&ie=UTF-8&c2coff=1&threadm=4009ccc9%241%40newsgroups.bea.com&rnum=1&prev=/groups%3Fq%3D24776%2520OracleImplXAResource%26hl%3Den%26lr%3D%26ie%3DUTF-8%26c2coff%3D1%26sa%3DN%26tab%3Dwg
Regards,
Slava Imeshev
"Steven Ostrowski" <[email protected]> wrote in message news:40ce1480$1@mktnews1...
Hello,
I believe that I have a connection leak somewhere and that an Oracle
connection is hung.
I get the following error when trying to access the data source
getConnection method.
How can I recover from this? The WL Server console shows 0 connections
to the connection pool, but obviously some are in there.
Thanks,
java.sql.SQLException: XA error: XAER_RMERR : A resource manager error
has occur
ed in the transaction branch start() failed on resource 'Oracle Connection
Pool': XAER_RMERR : A resource manager error has occured in the
transaction bra
nch
javax.transaction.xa.XAException: [BEA][Oracle JDBC Driver]Oracle XA
Error Occur
red. Native Error: 24776
at
weblogic.jdbcx.oracle.OracleImplXAResource.checkError(Unknown Source)
at weblogic.jdbcx.oracle.OracleImplXAResource.start(Unknown Source)
at weblogic.jdbcx.base.BaseXAResource.start(Unknown Source)
at weblogic.jdbc.jta.DataSource.start(DataSource.java:617)
at
weblogic.transaction.internal.XAServerResourceInfo.start(XAServerReso
urceInfo.java:1075)
at
weblogic.transaction.internal.XAServerResourceInfo.xaStart(XAServerRe
sourceInfo.java:1007)
at
weblogic.transaction.internal.XAServerResourceInfo.enlist(XAServerRes
ourceInfo.java:203)
at
weblogic.transaction.internal.ServerTransactionImpl.enlistResource(Se
rverTransactionImpl.java:419)
at weblogic.jdbc.jta.DataSource.enlist(DataSource.java:1287)
at
weblogic.jdbc.jta.DataSource.refreshXAConnAndEnlist(DataSource.java:1
250)
at weblogic.jdbc.jta.DataSource.getConnection(DataSource.java:385)
at weblogic.jdbc.jta.DataSource.connect(DataSource.java:343)
at
weblogic.jdbc.common.internal.RmiDataSource.getConnection(RmiDataSour
ce.java:305)
[att1.html]

How to recover from RTSA71-55P6AU-XD003G-60UM03

Hello -
How do I recover from this 'Start Up' error:
RTSA71-55P6AU-XD003G-60UM03
When starting up normally or in Safe Mode, it stops frozen and hangs until a hard shutdown is implemented.
In safe mode start-up, the process stops at 'atipcie.sys'.
Any ideas?
- Dub
Compaq Presario CQ62-220US Notebook
This question was solved.
View Solution.

Hi,
For software damages, we may be able to recover data but for hardware damages, sometimes very hard to recover data and many times we can't recover at all.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How to recover from datasource.getConnection hangover

Hi,
We have a standalone J2EE application wherein the app tries to restart itself in case of FATAL errors like connection loss etc.
Database: Oracle10g
Driver: oracle.jdbc.driver.OracleDriver
Issue: On error, the service tries to restart itself dueing which it aborts the connection and recreates the connection with datasource.getConnection().
In some cases during Soak testing, if the database goes down then the application seems to hang on datasource.getConnection() for almost 3 hours and greater.
Options we tried :
1. Use OracleDataSource and setLoginTimeout as 10 secs.
There seems to be no effect on the code. Not sure whether the datasource actually uses the timeout interval.
2. Use CONNECT_TIMEOUT_LISTENER=10 in listener.ora on the database server.
Does not seem to resolve the issue. getConnection still hangs.
Any suggestions what would be the best way to recover from this issue?

Hi,
The same should be available in the source system (DEV), Surprising how / why the same is available in BW system.
I checked the SAP ERP source system to which I have an access and the same is not available in the source system not in the BW system
My sugession is to go for a generic datasource after identifying the table with the help of functional consultant.
Regards
Venkata Devaraj

How to recover from deletion of JSF Run-Time Support Library

While using the library manager to add a new library, we accidentally deleted the JSF Run-Time Support library. This was a big mistake as nothing works after doing this. Is there any way to recover from this gracefully and manually reconfigure this library back into the library manager? We have experimented with it on another system and found that we have to completely delete the user's preferences and then re-install JSC2 thus losing all the developer's environment which is quite a loss. We are sure it will happen again but we would like to find a more graceful recovery solution. This is a Windows environment.

You can recreate the library definition, but doing it using the library manager tool is not possible.
Close Creator. Inside your Creator user directory, create a file "jsfsupport-runtime.xml" in the directory
.Creator\2_0\config\org-netbeans-api-project-libraries\Libraries
Add the following content to the new file:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE library PUBLIC "-//NetBeans//DTD Library Declaration 1.0//EN" "http://www.netbeans.org/dtds/library-declaration-1_0.dtd">
<library version="1.0">
    <name>jsfsupport-runtime</name>
    <type>j2se</type>
    <localizing-bundle>com.sun.rave.api.jsf.project.libraries.Bundle</localizing-bundle>
    <volume>
        <type>classpath</type>
        <resource>jar:nbinst:///modules/ext/jsfcl.jar!/</resource>
        <resource>jar:nbinst:///modules/ext/jsf-impl.jar!/</resource>
        <resource>jar:nbinst:///modules/ext/jsf-api.jar!/</resource>
        <resource>jar:nbinst:///modules/ext/commons-beanutils.jar!/</resource>
        <resource>jar:nbinst:///modules/ext/commons-collections.jar!/</resource>
        <resource>jar:nbinst:///modules/ext/commons-digester.jar!/</resource>
        <resource>jar:nbinst:///modules/ext/commons-logging-1.0.4.jar!/</resource>
        <resource>jar:nbinst:///modules/ext/dataprovider.jar!/</resource>
        <resource>jar:nbinst:///modules/ext/appbase.jar!/</resource>
    </volume>
</library>Restart Creator. Note however that if you delete your .Creator directory, you will loose the library definition.
// Gregory

How to recover from accidental VM role removal in Hyper-V Failover Cluster Manager?

Similar Messages

Maybe you are looking for