How to recover from error message 13014

I am having a problem with launching the itunes from my computer. I consistantly receive the error message 13014 with every attempt. Is there some way I can recover from this error short of wiping the computer clean?

Repair Permission with Disk Utility. See if it starts.
If not, relocate Genius related files in your iTunes Library folder to another folder somewhere. Test if it starts.

Similar Messages

How to recover from error 1618 on my ipod touch 4th gen.

How do I restore my ipod touch 4th gen, when I keep getting a 1618 error when I am trying to restore it with iTunes??

Try looking at the previous posts on the right side of this page under the heading "More Like This".

How to get the Error message from hr_contact_rel_api.create_contact

Hello All,
I am using this API for creating a contact for an employee in R12.
But, some times i am not able to create the contact successfully, and Unable to figure out proper reason for record erroring out.
I dont find any out msg data variables for this API in order to check it for the Error.
So, can any body help me how to get the ERROR Message for such APIs.
Thanks inAdvance,
Amarnadh Js

user12243334 wrote:
solved the issue on myselfIt would be nice if you could share the solution with us.
Thanks,
Hussein

Itunes on external drive will not open - error message 13014

I have never posted a question here before - just kind of been stumbling my way around the forums looking for answers, which has usually worked for me - until today. About a year ago, I moved my itunes (music and movies) to an external drive to free up space on my imac - following instructions in one of these forums. It has been working with very few issues until today. Suddenly, I am unable to open itunes. I get the error message 13014. I have tried restarting (several times) and updating itunes with no luck. I am at a complete loss. I am afraid if someone asks how exactly I moved my itunes library, I won't be able to answer that. Until today, I've been opening up my itunes by holding down the option key while opening itunes, and it has worked just fine, but now I am faced with this error message and no itunes. Any help would be greatly appreciated.

Try this discussion...
https://discussions.apple.com/message/12059605#12059605
From the More Like This section on the right

How to show custom error message in WebADI Excel template?

Hi,
I've created a custom Web ADI integrator and associated it with a 'Procedure' based custom interface.
WebADI Interface API Returns is set to "Error Message".
I'm using raise_application_error(-20001, "Actual Error Message") for invalid rows,but custom error message from PL/SQL is not populated on the excel template.
Instead it is showing "SQL exception occurred during PL/SQL upload".
Am I missing anything? How to show custom error message from Pl/SQL procedure to WebADI Excel template?
TIA
Narasimha

The custom API errors are visible in the BNE log but not on the Excel.
BNE Log=>
12/10/13 2:52 PM Web ADI Upload Job 13008 ERROR          BnePLSQLUpload.doUpload: Exception while uploading to PL/SQL API. Error Code: 20001, Message: ORA-20001: -Please enter CONTAINER_ID - Enter PO_NO -
ORA-06512: at "APPS.XXPO_COSTFACTS_WEBADI_PKG", line 264
ORA-06512: at line 1
12/10/13 2:52 PM Web ADI Upload Job 13008 ERROR          BnePLSQLUpload.doUpload: Stack trace: java.sql.SQLException: ORA-20001: -Please enter CONTAINER_ID - Enter PO_NO -
ORA-06512: at "APPS.XXPO_COSTFACTS_WEBADI_PKG", line 264
ORA-06512: at line 1
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:439)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:395)
at oracle.jdbc.driver.T4C8Oall.processError(T4C8Oall.java:802)
at oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:436)
at oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:186)
at oracle.jdbc.driver.T4C8Oall.doOALL(T4C8Oall.java:521)
at oracle.jdbc.driver.T4CCallableStatement.doOall8(T4CCallableStatement.java:202)
at oracle.jdbc.driver.T4CCallableStatement.executeForRows(T4CCallableStatement.java:1005)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1307)
at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3449)
at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.java:3550)
at oracle.jdbc.driver.OracleCallableStatement.execute(OracleCallableStatement.java:4710)
at oracle.jdbc.driver.OraclePreparedStatementWrapper.execute(OraclePreparedStatementWrapper.java:1374)
at oracle.apps.bne.integrator.upload.BnePLSQLUpload.doUpload(BnePLSQLUpload.java:284)
at oracle.apps.bne.integrator.upload.BneSAXUploader.processDeepestLevel(BneSAXUploader.java:2346)
at oracle.apps.bne.integrator.upload.BneSAXUploader.startElement(BneSAXUploader.java:1182)
at oracle.xml.parser.v2.XMLContentHandler.startElement(XMLContentHandler.java:181)
at oracle.xml.parser.v2.NonValidatingParser.parseElement(NonValidatingParser.java:1288)
at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:336)
at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:303)
at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:234)
at oracle.apps.bne.integrator.upload.BneUploader.processUpload(BneUploader.java:301)
at oracle.apps.bne.integrator.upload.BneAbstractUploader.processUpload(BneAbstractUploader.java:114)
at oracle.apps.bne.integrator.upload.async.BneAsyncUploadThread.run(BneAsyncUploadThread.java:140)
12/10/13 2:52 PM AJPRequestHandler-HTTPThreadGroup-5 WARNING        BneOracleWebAppsContext.getTimeZone CLIENT_TIMEZONE_ID has not been set
12/10/13 2:52 PM AJPRequestHandler-HTTPThreadGroup-5 ERROR          BneOracleWebAppsContext.getExtraJDBCConnection recieved the same connection as the base connection. There may be transaction problems.
How to show the same error in the excel template?
Here is the package:
CREATE OR REPLACE PACKAGE BODY APPS.XXPO_COSTFACTS_WEBADI_PKG
AS
   PROCEDURE upload_data (
                          P_CONTAINER_ID IN VARCHAR2
                        , P_SAIL_DATE IN DATE
                        , P_PO_NO IN VARCHAR2
                         ) IS
    --declare
    lv_err_msg      VARCHAR2(240);
    lf_err_flag     NUMBER := 0;
    ln_temp         NUMBER;
    BEGIN
    --------------------- checking for mandatory parameters---------------------------
      IF (P_CONTAINER_ID IS NULL) THEN
         lf_err_flag := 1;
         lv_err_msg := lv_err_msg||'-'||'Please enter CONTAINER_ID - ';
      END IF;
      -------------Validation for Sail Date Format----------------------
      IF (P_SAIL_DATE IS NULL) THEN
         lf_err_flag := 1;
         lv_err_msg := lv_err_msg || ' ' || 'Enter Sail Date - ';
      ELSE
         BEGIN
            SELECT 1
              INTO ln_temp
              FROM DUAL
             WHERE P_SAIL_DATE = TO_DATE (TO_CHAR (P_SAIL_DATE, 'DD-MON-YYYY'), 'DD-MM-YYYY');
         EXCEPTION
            WHEN NO_DATA_FOUND THEN
               lf_err_flag := 1;
               lv_err_msg := lv_err_msg || ' Enter Sail date in DD-MON-YYYY Format';
            WHEN OTHERS THEN
               lf_err_flag := 1;
               lv_err_msg := lv_err_msg || ' Enter Sail date in DD-MON-YYYY Format'|| SQLERRM;
         END;
      END IF;
      -------------Validation for PO_Number----------------------
      IF (P_PO_NO IS NULL) THEN
         lf_err_flag := 1;
         lv_err_msg := lv_err_msg || ' ' || 'Enter PO_NO - ';
      ELSE
         BEGIN
            SELECT count(1)
              INTO ln_temp
              FROM PO_HEADERS
             WHERE Attribute4 = P_PO_NO;
         EXCEPTION
            WHEN NO_DATA_FOUND THEN
               lf_err_flag := 1;
               lv_err_msg := lv_err_msg || ' No Oracle PO for Biceps PO#'||P_PO_NO;
            WHEN OTHERS THEN
               lf_err_flag := 1;
               lv_err_msg := lv_err_msg || ' Error getting the Oracle PO for Bicpes PO#'||P_PO_NO||' Error-' || SQLERRM;
         END;
      END IF;
     -----------------------Insert Record----------------------------
     IF lv_err_msg is NULL THEN
     BEGIN
         INSERT
          INTO XXP2P_HW_COST_FACTORS_STG
                 CONTAINER_ID
                ,SAIL_DATE
                ,PO_NO
                , ERROR_FLAG
                , ERROR_MSG
               ,CREATED_BY
                ,CREATION_DATE
                ,LAST_UPDATED_BY
                ,LAST_UPDATE_DATE
                ,LAST_UPDATE_LOGIN
            VALUES
                 P_CONTAINER_ID
                ,P_SAIL_DATE
                ,P_PO_NO
                ,lf_err_flag
                ,lv_err_msg
              ,FND_GLOBAL.USER_ID
                , trunc (sysdate)
                ,FND_GLOBAL.USER_ID
                , trunc (sysdate)
                ,FND_GLOBAL.LOGIN_ID
              -- commit;
              DBMS_OUTPUT.put_line
                '-' || 'After ap_invoices_interface'
        EXCEPTION
        WHEN OTHERS THEN
          ROLLBACK;
          lf_err_flag := 1;
          lv_err_msg := lv_err_msg || ' ' || 'error loading CONTAINER_ID-' || P_CONTAINER_ID || SQLERRM;
          raise_application_error(-20001, lv_err_msg);
        END;
    ELSE
          raise_application_error(-20001, lv_err_msg);
    END IF;
END upload_data;
END XXPO_COSTFACTS_WEBADI_PKG;

How to populate a Error message in WebUI Screen

Dear Experts,
I have a small issue in Lead creation screen. I need to restrict the followup document if the lead end date is lesser than the system date, if the end date lesser than the system date system should through a error message in web Ui Screen and the lead follow up creation should be stoped.
We found an enhancement spot in backend(GUI) of lead creation we raised the error message in the backend screen. Here its working fine, But we are not able to get any error message in WebUI lead creation screen.
We written the code in CREATE_ORDER Method of lead creation in GUI ( tcode : CRMD_ORDER). We tried to debug the program using external debuger from webui but its not getting triggered.
Pls suggest me, how to raise a error message for WEBUI lead follow up creation validation.
Kindly do the needful.
Reg,
Anandhan

HI Anandhan,
Try this way,
This should work.
lr_global_messages type ref to cl_crm_genil_global_mess_cont,
        lr_core                 type ref to cl_crm_bol_core,
"Instantiate the error message class.
lr_core = cl_crm_bol_core=>get_instance( ).
if lr_core is bound.
    lr_global_messages ?= lr_core->get_global_message_cont( ).
endif.
        if lr_global_messages is bound.
          call method lr_global_messages->add_message
            exporting
              iv_msg_type       = lv_msg_type
              iv_msg_id         = '
              iv_msg_number     =
              iv_show_only_once = 'X'
              iv_msg_v1         =
              iv_msg_v2         =
        endif.

How to display an error message after validation in Formatted Search?

Hi SBO experts,
if an error is detected on validation in a Formatted Search, how to display an error message to the user entering the data?
Thanks & Regards,
Raghu Iyer

i created a formatted search query & attached it to the field 'Quantity' at Line Item level in Sales Order screen. just for testing purpose, i eneterd the following code lines in the query validating 'Quantity'
if $[$38.11.0] > 50
begin
select @error = 1
select @error_message = 'Vendor code cannot begin to X sign.'
end
the system throws the error : Internal error (8180) occurred [Message 131-183]
actually, i need to display an error message to the user if Quantity is not in multiples of the OITM.SalFactor2
if $[$38.11.0] % (SELECT T0.[SalFactor2] FROM OITM T0 WHERE T0.[ItemCode] = $[$38.1.0]) > 0
begin
select @error = 1
select @error_message = 'Error in Quantity.'
end
but, this expression to get the remainder itself seems to have some error
$[$38.11.0] % (SELECT T0.[SalFactor2] FROM OITM T0 WHERE T0.[ItemCode] = $[$38.1.0])
i guess, % operator is used for modulo (to find the remainder of one number divided by another.) ? am i right ?
Regards,
Raghu Iyer

How do you fix error message "There is a problem with Adobe Acrobat/Reader. (6:6)

How does one fix error message "There is a problem with Adobe Acrobat/Reader.
If it is running, please exit and try again. (6:6)

http://www.essexinfo.net/queens-road-residents-association/assets/documents/village-voices is one example but a whole lot of the material which has been uploaded as pdf files over the last four years is now unviewable - if you click on the link you just get a black page. The main site url is http://www.essexinfo.net and our site is the Queens Road Residents Association. I have just gone through every link on the site and a number of links when clicked on will not bring up the material. I tried going into Adobe 10 on my computer and disenabling protected mode as was suggested on your forum and at first when I went back into the essex info site it seemed to have worked when I clicked on a link that had only produced a black page. However when I went back to test all the other links I found that the problem was still re-occuring. This is really weird as the site and my connections to it which I sometimes make by directly accessing the site and sometime via a link from our QRRA blog have always worked perfectly with no problems up to now. I downloaded adobe 10.1 on 8 March 2011.
I contacted essexinfo separately but they said everything seemed to be OK at their end working from within the system.
If you can help I would appreciate it.
Pat

How to read the error message like clipping positive or -ve in Tektronix oscillioscope 3012B

During acquiring the Sine wave or triangular wave from TDS3012B, if the amplitude or Max or min is clipping, how do you read the error? I used *ESR?, first time when I ran the error query program, it gave me Error message saying it is clipping, after that If I run again,the error query , It would not give me the error message, I couldn't reproduce it, eventhough but On the screen if I measure, Amp, min and Max it says that it is clipping positive or -ve. I was wondering how to read the error message while aquiring the data? If any one could help me that would be of great help.. Thanks

Usually, reading the error status register clears it. I'm not familiar with this particular model of scope but you may have to initiate a new acquisition in order for the scope to generate a new error. Another possiblity is that a new error will be generated when the vertical scale changes. Unless someone posts with an answer, I'd say that your best bet to get an answer is to contact Tektronix technical support.

How to recover from bad development of masterhead or layout or nav panel

Hi all:
I begin to modify framework of our portal, but I am new to it, my question is how to recover from bad development of masterhead or layout or nav panel, there is error in my development.
thank you very much for your reply

Hi,
ARe you able to access Content admin and system admin from your portal now?
What is the error its occuring.
Try to modify the rule collection to point to default desktop.
Best Wishes
Idhaya R

Can't open itunes- error message 13014.

I am not able to open Itunes and I am receiving error message 13014. What does that mean and how can I fix it.

the suggestions in this thread may be helpful.
JGG

How to recover my viber messages? without replacing the other application when i will restore my last backup.

how to recover my viber messages? without replacing the other application when i will restore my last backup.

Maybe from the restored iPod via How to perform iPad recovery for photos, videos
Wondershare Dr.Fone for iOS: iPhone Data Recovery - Wondershare Official
http://www.amacsoft.com/ipod-data-recovery.html
iPod recovery software to restore lost music files
http://www.pcrecoverytools.com/ipod-data-recovery.html
Yu also said:
I think this is because
I backed up a long time ago, and the iTunes update may have erased the back up?
No, updating iTunes does not delete any iOS device backups.

How to customize the error messages in web analysis reports

Does anyone know how to customize the error messages that web analysis shows ,
I want to customize the below error message with a custom error message
"Document does not exist or no authorization to open document.Error occurred while loading document"
Does anyone know how to do this ?

Rajesh,
you may want to check these links
How to the Change the Application Stopped Message
How to Change the Dispatcher Running, No Server Connected Message
http://help.sap.com/saphelp_nw70/helpdata/en/65/18fc3f9ec4e669e10000000a155106/frameset.htm
Thanks
Bala Duvvuri

My iTunes will not open, error message 13014, help!

My itunes will not open on my Macbook Pro, everytime I try it says error message 13014, what does this mean? Thank you!

Hold the option key while starting iTunes and create a new library. Does it start now? If so, it's something to do with your library file. Is there anything we should know about your computer such as you keeping your library on a NAS?

How can we trigger error message in BADI PARTNER_UPDATE

Hi All,
I have implemented a BADI PARTNER_UPDATE. In this I have validation ( Error Message ) on saving buisness partner.
It is giving the error message but it freeze all the fields. On pressing enter it goes for short dump.
In short dump it gives error The COMMIT WORK processing must not be interrupted.
Kindly suggest me that how can we pass error message and it also does not freeze the fields.
Regards,
Narendra Goyal

Hi Narendra,
How are you trying to display message.
Is it using message service class instance of message statement (which should not be used, as that is for GUI messages) or using collect FM or by adding to genil message class container.
Please try different approaches and see what works for you.
Thanks,
Rohit

How to recover from error message 13014

Similar Messages

Maybe you are looking for