How to recover from printer software corruption?

PrintJobMgr failed with status 203. Identified Leopard printing software corruption as likely cause. Any solution short of a clean Leopard reinstall?

Something is corrupting it.
Check your Login items under the Accounts Pref Pane.
Also check: Macintosh HD:Library:StartupItems
Try removing some to see if the issue remains.
Also you can deep clean your caches:
http://www.macupdate.com/info.php/id/9503/leopard-cache-cleaner
Thanks ... Ken
Message was edited by: sgginc

Similar Messages

How to recover from a software failure on the 6120 Fabric Interconnect

Hi all,
Had a software failure while upgrading the fabric interconnects. Does anyone know the process to recover from a software failure.
Ive copied up the kickstart and system images, from the loader prompt ive booted the kickstart image and then loaded the system image but the fabric interconnect still reboots to the "switch(boot)" prompt.
Thanks in Advance
Darren

Hi Robert,
Thanks for the tips, but unfortunately im still stuck on the switch(boot): prompt.
The bootflash: only has 2 files in it, the kickstart and system image.
Each time i get the FI to the boot prompt, i can ping the device, but not access via the GUI. (i dont have a local copy of UCSM installed)
What files should i have in the bootflash: for the FI to correctly load.
below is a log of the FI as it loads the kickstart image from the Loader prompt.
loader> boot bootflash:ucs-6100-k9-kickstart.4.1.3.N2.1.3c.bin
Booting kickstart image: bootflash:ucs-6100-k9-kickstart.4.1.3.N2.1.3c.bin....
....................................................................Image verif
ication OK
Starting kernel...
Usage: init 0123456SsQqAaBbCcUu
INIT: version 2.85 booting
Starting Nexus5010 POST...
Executing Mod 1 1 SEEPROM Test......done
Executing Mod 1 1 GigE Port Test.......done
Executing Mod 1 1 Inband GigE Test.....done
Executing Mod 1 1 NVRAM Test....done
Executing Mod 1 1 PCIE Test..............................done
Mod 1 1 Post Completed Successfully
Mod 2 Post Completed Successfully
POST is completed
Creating /callhome..
Mounting /callhome..
Creating /callhome done.
Callhome spool file system init done.
Checking all filesystems..... done.
Warning: switch is starting up with default configuration
Checking NVRAM block device ... done
The startup-config won't be used until the next reboot.
Loading system software
INIT: Sending processes the KILL signalkernel daemon...don
Cisco Nexus Operating System (NX-OS) Software
TAC support: http://www.cisco.com/tac
Copyright (c) 2002-2010, Cisco Systems, Inc. All rights reserved.
The copyrights to certain works contained in this software are
owned by other third parties and used and distributed under
license. Certain components of this software are licensed under
the GNU General Public License (GPL) version 2.0 or the GNU
Lesser General Public License (LGPL) Version 2.1. A copy of each
such license is available at
http://www.opensource.org/licenses/gpl-2.0.php and
http://www.opensource.org/licenses/lgpl-2.1.php
switch(boot)#
From here i can the load the system image, but it always fails and drops me back to the same prompt, output show below
Uncompressing system image: bootflash:/ucs-6100-k9-system.4.1.3.N2.1.3c.bin
Loading plugin 0: core_plugin...
plugin_link_to_exec_path: plugin_path = /isan/plugin/0, tar_log = /isan/plugin_extract_log/0
Loading plugin 1: eth_plugin...
plugin_link_to_exec_path: plugin_path = /isan/plugin/1, tar_log = /isan/plugin_extract_log/1
plugin_file_is_excluded_from_exec_path: /boot/ is excluded from linking
plugin_file_is_excluded_from_exec_path: /boot/lib/ is excluded from linking
plugin_file_is_excluded_from_exec_path: /boot/lib/libplugin_sysreg.so.0.0.0 is excluded from linking
plugin_file_is_excluded_from_exec_path: /boot/lib/libplugin_sysreg.so.0 is excluded from linking
plugin_file_is_excluded_from_exec_path: /boot/lib/libplugin_sysreg.so is excluded from linking
plugin_file_is_excluded_from_exec_path: /boot/etc/ is excluded from linking
plugin_file_is_excluded_from_exec_path: /boot/etc/plugin_exclude.conf is excluded from linking
plugin_file_is_excluded_from_exec_path: /boot/ is excluded from linking
plugin_file_is_excluded_from_exec_path: /boot/lib/ is excluded from linking
plugin_file_is_excluded_from_exec_path: /boot/lib/libplugin_sysreg.so.0.0.0 is excluded from linking
plugin_file_is_excluded_from_exec_path: /boot/lib/libplugin_sysreg.so.0 is excluded from linking
plugin_file_is_excluded_from_exec_path: /boot/lib/libplugin_sysreg.so is excluded from linking
plugin_file_is_excluded_from_exec_path: /boot/etc/ is excluded from linking
plugin_file_is_excluded_from_exec_path: /boot/etc/plugin_exclude.conf is excluded from linking
Loading plugin 2: fc_plugin...
plugin_link_to_exec_path: plugin_path = /isan/plugin/2, tar_log = /isan/plugin_extract_log/2
plugin_file_is_excluded_from_exec_path: /boot/ is excluded from linking
INIT: Sending processes the TERM signal /boot/lib/ is excluded from lin
INIT: (boot)# l
INIT: Sending processes the KILL signaldaemon...don
Cisco Nexus Operating System (NX-OS) Software
TAC support: http://www.cisco.com/tac
Copyright (c) 2002-2010, Cisco Systems, Inc. All rights reserved.
The copyrights to certain works contained in this software are
owned by other third parties and used and distributed under
license. Certain components of this software are licensed under
the GNU General Public License (GPL) version 2.0 or the GNU
Lesser General Public License (LGPL) Version 2.1. A copy of each
such license is available at
http://www.opensource.org/licenses/gpl-2.0.php and
http://www.opensource.org/licenses/lgpl-2.1.php
switch(boot)#
please let me know if you require any further information.
Thanks in Advance
Darren

How do I copy printer software files from a folder on my desktop to a CD?

How do I copy printer software files from a folder on my desktop to a CD?

Select all the files, right click and choose burn.

How do you delete printer software?

how do you delete printer software?

I don't believe you need more than 500Mb of free space if you perform the update through itunes. As all operations are done on the computer, and then the files are simply replaced with the newer versions.
As to your other questions:
Tormund0123 wrote:
After you download a software update, how do you delete it?
You don't. As long as you don't install it it will be there. Once installation is complete, the system will delete it from the device.
Tormund0123 wrote:
Once you press the "Download and Install" button, what happens next? Does it do the former first, the latter first, or both?
Obviously it can't install if it hasn't Downloaded first. So if you still have the "Download and Install" option as opposed to the "Install Now" option it will first download and then install.
Tormund0123 wrote:
If you try to download iOS 7 by syncing tyour device to iTunes, what happens if you press "Download only?" Will the software download AND install, or just download only?
If you are using Itunes and choose to only Download, then it will simply download the update package and store it on your computer. When you are ready to install it you can then press the install button.

How to recover from bad development of masterhead or layout or nav panel

Hi all:
I begin to modify framework of our portal, but I am new to it, my question is how to recover from bad development of masterhead or layout or nav panel, there is error in my development.
thank you very much for your reply

Hi,
ARe you able to access Content admin and system admin from your portal now?
What is the error its occuring.
Try to modify the rule collection to point to default desktop.
Best Wishes
Idhaya R

How to recover from disapled ipad

how to recover from locked ipad after wrong passwored trile

If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup).
If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present.
You may have to force iPad into Recovery Mode
http://support.apple.com/kb/ht1808

I upgrade succesfully my laptop OS from mountain lion to maverick. i have my canon IR 2530 driver installed. after i reset my printer, the driver is not showing from Printer Software. could you guys help me to solve these problem?

I upgrade succesfully my laptop OS from mountain lion to maverick. i have my canon IR2530 driver installed. after I reset my printer and add again(Canon IR2530), the driver is not showing from Printer Software. could you guys help me to solve these problem?

Maybe this thread will help:
https://discussions.apple.com/message/23873672#23873672

How to recover from a bad upgrade due to a blackout, stuck in the recovery itunes screen on the iphone

how to recover from a bad upgrade, due to a blackout. stuck in the recovery itunes screen on the iphone

Bjpolinda,
Do you have a recent iCloud or iTunes backup? If so, just plug your phone into iTunes, restore the phone and bring your backup back by following the prompts on the phone.
If you didn't back up your phone before attempting to update, you may have lost all your photos and other data on your phone. If you restore the phone through iTunes, it will most definitely wipe your phone of all data and reset it to factory settings.
Emmons

How can I reinstall printer software only from the original install disks?

my imac 17" printer software got corrupted and I can't use my new printer. Is there a way to just install all the original printer software from my original disks that came with the mac? I have updated all the software on the mac and don't want to go back to the old panther disk.
or is there an apple download site that has just the printer software.
thanks

Insert your original disk and look for additional software, the printers should be somewhere there. Your other option is to get [Pacifist|http://www.versiontracker.com/dyn/moreinfo/macosx/12743] and use it to extract the printer data from the install package.

How do I delete printer software from the hard drive on my iMac

How do I remove the printer software completely from the harddrive on my iMac ?
Thanks

Double-click your boot volume's Desktop icon, put the Finder window into list view, and drill down into these three Library folders.

How do i install printer software for wireless connection for a notebook?

Product name: Photosmart 6510
What to do when my notebook laptop does not have a disk drive but has wireless internet. How can I install the printer software on the CD?
Kind regards

You can download the printer software from the internet. Here is the link for your specific printer: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=5058336&cc=us&dlc=en&lc=en&product=50583...
Choose your operating system and then go to Driver--Product Installation Software and choose the Basic or Full driver.
Let me know if you have additional questions.
I work for HP.

How to recover from RTSA71-55P6AU-XD003G-60UM03

Hello -
How do I recover from this 'Start Up' error:
RTSA71-55P6AU-XD003G-60UM03
When starting up normally or in Safe Mode, it stops frozen and hangs until a hard shutdown is implemented.
In safe mode start-up, the process stops at 'atipcie.sys'.
Any ideas?
- Dub
Compaq Presario CQ62-220US Notebook
This question was solved.
View Solution.

Hi,
For software damages, we may be able to recover data but for hardware damages, sometimes very hard to recover data and many times we can't recover at all.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How to address HP Printer Software Update 3.0, iTunes 12.0.1 update that sits in the App Store, 'Calculating' for days with no install?

The App Store indicates there is a Software Update that appears to include the HP Printer Software Update 3.0 and iTunes 12.0.1
Unfortunately, the software update fails to install. Instead, it just sits there 'Calculating' for days with no progression on the status bar of the overall update.
The update buttons of both the HP Printer Software Update 3.0 and iTunes 12.0.1 are both greyed out, with no progress bar.
Not sure of what the issue is, there is no warning or error dialog box that appears or any indication of an application that may be interfering with the install.
Any advice?
MacBook Pro (17-inch, Early 2011) 2.3 GHz Core i7, 4GB RAM

Thanks for the suggestion. I wanted to install the individual updates but because I had settings to automatically download and install updates, whenever I opened the App Store, the system would try to download and install, preventing me from canceling the update to execute each application update one at a time.
After changing the settings from automatically downloading and applying updates, followed by a restart. I was able to open the App Store and run each individual update.
Thanks again.

How to recover from Large Volume Table Insert

We are inserting 1 Million rows into table using ODI IKM Append. If half the way thru the job fails because of tablespace or other issue, how to recover? Does 50% rows are commited to db? What is the best way to handle this type of situation?

You can have different options for this.. You can commit them in every 1000 rows in the KM.You can also set the dml operation into one transaction and commit the same at the end of step.
Try to follow load plan for better restart options. If you cann't provide more undo table space then try loading less amount of records lets say 1 to 100,000 and then 100,001 to 200,000 like this which is little bit complex but you have to sacrifice something to overcome the issue.
I believe you must have data in C$ and I$ step. Hence you process these data instead of loading again from original source. So it depends on you, how you are going to design the total process. You can better judge it. Talk with your dba about this issues as well.
Thanks
http://bhabaniranjan.com/

HT1212 how to recover from passcode lock

Please help to recover from lock out device disabled after wrong passcode enterred There seems to be not backup avaiable on home PC.

Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
1. iOS- Forgotten passcode or device disabled after entering wrong passcode
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. Restoring iPod touch after forgotten passcode
4. What to Do If You've Forgotten Your iPhone's Passcode
5. iOS- Understanding passcodes
6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
Forgotten Restrictions Passcode Help
You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
Also, see iTunes- Restoring iOS software.

How to recover from printer software corruption?

Similar Messages

Maybe you are looking for