How to recover Guided Procedures Workitems

Hello,
We have Guided Procedures Integrated with the UWL for Workflow and some Workitems got deleted accidentally for all users . Is there a way those workitems can be recovered ?
Any help would be highly appreciated.

Hello,
The tasks may still be available in Guided Procedures --> Runtime --> Task that require my Action.
If they have been deleted from here also, it will not be possible to retrieve them.
Thanks and best regards,
Carl Connolly
Senior Support Consultant - Netweaver Web Application Server
AGS Primary Support, Global Support Centre Ireland
Guided Procedures trouble shooting guide:
https://
www.sdn.sap.com/irj/scn/wiki?path=/display/jstsg/%2528gp%2529home

Similar Messages

How to export Guided procedure - Initiator to RFC as an export parameter

Hi All,
How do I capture the Initiator, Owner and Oversee of my Guided procedure and bind it as an output parameter of a Callable object?
I need to this information to be sent to RFC so that I can perform the dynamic agent determination and send the agent back to Guide procedure.
Thanks in adv.
Edited by: Prab Vad on Sep 24, 2009 6:35 PM

Based on the UI dialog for Export XML, it looks like you'll first want to set an XMLExportPreference to copy either optimized or formatted images, and then choose and image type. So,
objDoc.xmlExportPreferences.copyFormattedImages = true;
or
objDoc.xmlExportPreferences.copyOptimizedImages = true;
followed by
objDoc.xmlExportPreferences.imageConversion = ImageConversion.JPEG
or
objDoc.xmlExportPreferences.imageConversion = ImageConversion.PNG
This help page describes the difference between optimized and formatted images: InDesign Help | Exporting XML
That should get you started. You may need to play with some other options to get the output you want, but that's the idea.

How to remove guided procedure instances?

Hi
how do I permanentely remove all terminated and completed guided procedure instances? I am extensively testing and accumulating lots of old instances.
Thanks very much for your help!
Best regards
Bettina Hepp

Hi Bettina,
What you need to do is to go to the Administration workset and choose Archiving and Deleting -> Maintain Process Templates from the contextual panel.
In the Global Settings tab page you can define such general settings for deleting or archiving process instances, such as for example archiving process older than 2 weeks or deleting completed process.
In addition, you can define specific settings for specific templates. Go to the Process Template Settings tab page, there browse and select the process you want to delete.
On the Custom Settings for Process Instance panel, you have to specify settings for the process if you want to define custom settings.
In addition to scheduled archiving and deleting of instances, you can start an archiving or deleting operation for selected process instances instantly. Again in the Administration workset, go to Archiving and Deleting
-> Start Archiving.
Hopefully this will be of some help
If you have any further questions, just write back
Greets,
Petra

How to setup Guided Procedure Monitoring in NWA?

Hi I have NW2004S patched to SP11.
When trying to open the Guided Procedure Monitoring in NWA
NWA, Monitoring>Guided Procedures
I get the following error:
Guided Procedures JMX provider is stopped in the target system. Start cafeugpmodeljmx~eap application
Guided Procedures JMX provider is stopped in the target system. Start cafeugpmodeljmx~eap application
Cannot retrieve basic info: :name=BasicInfoProvider,component=cafeugp not in repository
However, the application cafeugpmodeljmx~eap when you go to NWA applications tab.
Any suggestions on what must be done to configure the monitoring?
I need to do this to monitor / debug the GP.

Go into Visual Administration and check if the application has been started. The path is Services -> Deploy -> Monitoring Configurator. Expand that and see if the jmx.eap application is running. If not, then start the application.
Thanx,
Mahesh

How to get Guided procedures DC into track

Hi All,
I am trying to implement the functionality mentioned in the thread
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50d74ada-0c01-0010-07a8-8c118d408e59?overridelayout=true
But it says in order to implement that I need to import Guided Procedures related DCS and I dont know which Software component consists of all the DCS which i need to check in and import into track so that when i open sap.com_SAP-EU_1 component i can see all the GP related dcs.
Plz let me know the solution
Thanks
Bala Duvvuri

Hi Bala,
SAPPCUI_GP is the SCA which contains the related GP dc's.
Regards
Sreedhar

How to put Guided Procedure into EP7?

Do we need to do an installation of Guided Procedure on EP7 so that those GP tabs will show up?
Docs needed.
Thanks!!

Some of the help links if you want to get started.
Check these..,
wiki
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/dipankar%2bsaha
forums
/thread/40632 [original link is broken]
/thread/107379 [original link is broken]
help docs
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/0034e14db01a85e10000000a422035/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/44/68231834cf4688e10000000a11466f/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/97/08ae42e5adcd6ae10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/44/3bfd6765524903e10000000a1553f7/frameset.htm
Here you will get all the End to End elaerning stuff for GP.
https://www.sdn.sap.com/irj/sdn/bpx-elearning
Goahead.

How to hide "Resfresh" button in top yellow bar of guided procedures?

Hi Folks
I would like to remove the "Refresh" button in the top yellow bar of an guided procedures workitem. You get to this yellow bar when you click on an uwl workitem which is associated with guided procedures view. Does anybody know how to hide this button?
Thanks a lot for helping!!
Kind regards
Bettina

Dear Bettina,
this will be a feature of NetWeaver CE 7.2.
Until then it simply is not possible.
There is one workaround, you can use the SingleTask view of a Process Instance, which however will show ONLY the action itself, without the Process Title, or the Ctx Panel or the Phase Navigator.
If this works for you, I can guide you how to achieve it.
Regards,
George.

Guided Procedures On Adobe

Hi,
i wish to know how to implment Guided Procedures on Adobe..
but currently i not sure how it start..
hope anyone can guide me on how to do it...
as my requirement is the
1st step: PDF form start the process
2nd step: display out the data frm the PDF
3rd step: save the data into database.

hi
Did you install the Adobe LiveCycle Designer. if its no it will be available in http://service.sap.com/swdc.
Procedure :
1. In Adobe LiveCycle Designer, Create a new Form template
2. Go to the Body Pages tab page, and create the following Text fields
      -- To create a text field, use menu Insert -> Standard -> TextField.
     -- To modify its binding name, use menu Object--> Binding
     -- To modify the value type, use menu Object --> Value
3. Create a button with the folowing parameters using menu Insert > Standard> button
4. You can enhance the layout of your form template.
5. Finally save the template as MyFirstFormProcess.xdp and close it.
In Guided Procedures:
Procedure:
1. Launch GP design time and choose Create Callable Object from the contextual panel.
2. Enter the following data: like
       Type                  : select Interactive Form
       Name                 : enter CO4 : Application Data Form
      Description          : enter a brief descrioption of the Callable object ,as shown in the example below.
    Original Language   : choose English
     Location               : Choose folder My First Process
3. Choose Next.
        a) To select the form template that you have created , choose Change
        b) Browse the file system to select the file.
        c) For Template Adapter, choose Adobe Forms.
        d) For Language, choose English
        e) For Encoding, select the same encoding that you used when you created the form template.
        f) Choose OK.
4. Choose Next.
5. Choose Next.
6. Choose Next.
7. Choose Next and then Finish and Open.
8. Choose Activate Callable Object from the contextual panel.
plz reward points
Regards.
Sureshbabu M

How to get app.processId from Guided Procedures? Please I need You help

Hi everyone, I need your help, I need to recover the processId once time the Procees was started in Guided Procedures
I found this link from maintenance process in Guided Porcedures administration
http://host:port/webdynpro/dispatcher/sap.com/cafeugpui~rt/Runtime?app.processId=IDnumber
the parameter I need is IDnumber, I dont know if it is possible with web dynpros or with web services please I need you help
How Can I do this?
Thank you very much my friends
Regards from Mexico
Atte Israel

Hi,
I am not sure about the version. But you can follow the steps below.
1. Create a Web Dynpro Poroject (Ideally create a DC , but if you don't have NWDI setup a project will do).
2. Add reference to com.sap.security.api.jar and sap.comcafeugpapi.jar
3. Under WebDynpro References -> Library References add sap.com/cafeugp~api
4. Put following code in wdDoInit()
public void wdDoInit()
    //@@begin wdDoInit()
     IGPRuntimeManager rtm = GPProcessFactory.getRuntimeManager();
     IWDMessageManager msgMgr= wdComponentAPI.getMessageManager();
     try{
     IWDClientUser wdUser = WDClientUser.getCurrentUser();
     IUser user = wdUser.getSAPUser();
     IGPUserContext userContext = GPContextFactory.getContextManager().createUserContext(user);
     Date startDate = new Date(110,1,1); // Start date as 01-Jan-2010
     Date endDate= new Date(111,12,31); // End date as 31-Dec-2011
     IGPProcessInstanceInfo[] array = rtm.getRunningInstances(GPSearchRole.SEARCH_ROLE_OWNER, startDate, endDate, userContext);
     for (int i=0; i<array.length; i++){
     String instanceId = array<i>.getProcessInstanceID();
//        Write logic to pass the instance ID to the RFC
msgMgr.reportSuccess("Instance id =" + instanceId);
     catch(Exception ex)
     msgMgr.reportException(ex.getLocalizedMessage(),false);
    //@@end
Let me know if you face any issues.
Thanks
Prashant

Form with HTTP Submit.. Do I need a Guided Procedure ? How to Configure it?

Hi masters.
I have a adobe interactive form with HTTP submit, it works when it runs online, but when I save the pdf file, open, fill and submit, the server does not recieve any request.
I have read a lot of tutoriais but I still haven´t find a specific tutorial from the begin to the end of this process.
Should I create a Guided Procedure to recieve this form from http submit ? How can I create it ?
NetWeaver CE

Regardless of whether this bar is displayed or not, you should be able to access what is in the "Favourites" folder in a few ways.
Firstly via the Bookmarks link in Safari. This is the first icon directly to the right of the address bar. Pressing this will open your Bookmarks menu. If you see the word Bookmarks in blue select this and it will take you to the main bookmarks page, and the word Bookmarks will appear in black bold text. If you see Bookmarks in black bold text when first clicking Bookmarks you are where you need to be. The first link on here will be Favourites and have a star icon right next to it, click on Favourites and you will see what has been added to your Favourites folder - if anything. Also there is an Edit button in the bottom right of this screen, if you aren't going where you expected when selecting a URL in here press Edit, press the > arrow to the right of the favourite name, is the URL correct? If not change it, and click DONE on the keyboard - appears where Return key normally shows on the right-hand side.
If you are opening Safari and have no tabs already open or have already closed pages so none are open you will see icons that represent the contents of your Favourites folder displayed at the top of the page.
Also with a page loaded if you click in to the URL field then you will see these icons appear again, together with the keyboard at the bottom of the page.
Hope this helps.
Steve

UWL Guided Procedures and Substitution Rules functionality - how possible?

We are using Guided Procedures with Custom Web Dynpro objects and need to utilize user/role substitution that is easily enabled in other AdHoc tasks using 'Manage Substitution Rules. Unfortunately when creating and turning ON a substitution rule in the UWL all Guided Procedure Tasks are excluded and do not show up in the substituting person's UWL.
Does anyone have any ideas of how we can utilize Substitution Rules in UWL for all Guided Procedure tasks/steps?
Thanks in advance
-SteveW

Hi SteveW!
The situation you're facing is the normal behavior from GP in relation with substitution feature of UWL.
Unfortunately GP doesn't support substitution as the other UWL connectors do.
Best regards
Armando Zaro

Guided Procedure - How to customize.

Hi all,
I need some information guided procedures.
I have a standard guided procedure to approve the compensation adjustment (HR)
I have to "customize" it in order to send an email before the procedure is completed. The effect of the procedure is the approving of comp.adj, so its status is changed to approved. I would also like to insert also a workflow task (on ECC) before the status changes. Can you help to understand:
-if it is possible to customize a standard guided procedure?
- how to proceed in doing it?
Many thanks

Hi,
We are trying to send emails from the Guided procedures, did you succeed sending the emails? we don´t know if we have some configuration misssing but we are getting this error: error_smtp_connect
did you have the same issues? or similar?
Thanx in advanced,
Kind Regards,
Gerardo J

How to pass tables in Guided Procedures from VC

Hi experts!
I'am working in a workflow scenario, more precisely an approve-reject workflow scenario.
I've defined all the start and the end points belonging to the respective iviews (I mean the sender and the approver iviews), following the [Modeling Visual Composer iViews for Guided Procedures|http://help.sap.com/saphelp_nw70/helpdata/en/44/429bbd709914bce10000000a155369/frameset.htm]
and everything works ok if I pass input fields, data fields, or boolean fields.
But I need to pass tables (In fact, I need to pass MORE THAN ONE table).... Is that possible?
How do I make it?
Any help will be apprecieated and point-rewarded.
Thanks in advance
Best Regards,
Marcelo
P.S. I'm working on EP7 VC SP15

Hi,
If you'll create 2 iViews:
1. Table connected to end point (all the fields are mapped and table selection mode is multiple)
2. Table connected to start point with same fields.
and create GP process for it, you'll find that selecting all the fields and passing them will result with all the selected fields appear in the 2nd iView.
But, i don't know if you can pass the entire table automatically (without the user selecting all the records).
Hope I helped,
Shay

How to pass MDM Record ID in Webdynpro to use in Guided Procedure

Hello Experts,
I am facing the following requirement. I Have two WebDynpro Screens calling an MDM Item Detail View.
I want to set up an easy process using Guided Procedure.
Therefore I need to pass an internal ID from Screen A (request) as an input Parameter for screen B (approve).
How can I handle this in my wrapper application? Is did not find any guides. You have some ideas?
I should throv an "saveRecord" Event containing this ID to a event listener (Screen B).
Sorry I am a beginner in WD :o)
Thanks in advance
Carsten

Hi,
You can try doing this way in the application
1. check if the record is checked out,
If yes, then get the original record id via the command RetrieveOriginalsByCheckoutRecordCommand.
else
You have the original record Id in hand.
Best Regards,
-Prashant.

HT201303 I have forget answers of the all security questions. So, I request u to guide me how to recover it all

I have forget my security questions an there answers as well. So, can anybody guide me, how to recover it....

Welcome to the Apple Community.
Start here, and reset your security questions, you will receive an email to your rescue address, then go to manage your account > Password and Security and set your security questions.
If that doesn't help or you don't have a rescue address, you might try contacting Apple throughiTunes Store Support

How to recover Guided Procedures Workitems

Similar Messages

Maybe you are looking for