How to recover Inadvertently removed Worksheet from Discoverer workbook.

Hi,
i have lost a worksheet from my discoverer report, this worksheet i used to run on daily basis. is there any way to recover the worksheet from Database or from EUL tables.
Thanks!

Hi,
Unless you have a backup of the database table or a backup of the workbook in an .eex file then I am afraid there is no way to recover the worksheet.
Rod West

Similar Messages

How to eliminate or remove zeros from 1D array

How to eliminate or remove zeros from 1D array. Let say I have 1D array having foolowing elements
"0 0 0 0 0 4 0 0 9 0 0 1 4 0 0 0 0 0 0 0 0 10 9 0 0"
So after removing or eliminating zeros it will become as follow
"4 9 1 4 10 9"
So can any body guide me how can I do that? See attached Image for details.
Thanks
JK

altenbach a écrit :
hchiam wrote:
Here are 2 example .vi's I made based on altenbach's removeZeroes.png in this discussion thread:
It seems pretty pointless to post those because no new useful information is given.
Currently, only the input is defined in the connector pane, making them useless as subVIs.
unlike my example using integers, an "=0", like any "equal" comparison, is potentially dangerous with DBLs.
Reshaping a 2D array to 1D before removing zeroes is pretty pointless because a 2D output cannot be recovered. A more interesting scenario would be to remove some columns or rows (e.g. that are all zeroes) from a 2D array.
You should also clean up the front panel, e.g. properly zero the upper left corner, make the controls/indicators nicely labeled, sized and arranged, and maybe even add scrollbars to the arrays.
Thank you for those comments.
Now the input and output are defined (in the updated attachments) for use as example subVI's. I also cleaned up a few visual details, but I leave the rest for others to cater to their specific uses if they don't want to use this as a subVI (or at least as-is), such as changing the icons or changing to integers instead of doubles.
I'm not sure about what you mean exactly with "=0" being "potentially dangerous with DBLs". I'm guessing you had a certain case scenario in mind. Although the subVI's seem to work fine within my larger program and situation, my situation may not generalize with regards to this point.
I reshaped from 2D to 1D, with a 1D output, because it could be helpful for things like when later processing just needs a 1D array. For example, in my situation I had to remove a huge spike of unnecessary "0"'s from a previous subVI that were affecting the output display of a certain histogram. So it turned out a 1D array output was helpful, and you never know what problems come up, so I included the 2nd example.
Hopefully if someone is looking for this, they can just use or play with an example subVI (granted that they know how to plug things in for their context). I was hoping to post a subVI people could put to direct use.

I inadvertently removed Bonjour from my pc. Now I'm attempting to upgrade to Itunes 10.7 and I'm unable to because it can't find my original Bonjour .

I inadvertantly removed Bonjour from my pc. Now I'm attempting to upgrade Itunes to 10.7 for my 4S iphone. Itunes will not upgrade because it can't find my original Bonjour. How can I reinstall my original Bonjour?

Unfortunately, this sort of trouble has gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center. First we have to find a copy of the utility.
Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. (The results from mydigitallife and Major Geeks are worth checking.)
After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any Bonjour entries and click "Remove".
Quit out of CleanUp. Restart the PC, and try another iTunes install. Does it go through properly this time?

How to submit a concurrent request from Discoverer report.

I would like to know If any one has tried submitting a concurrent request from Discoverer Report?_
This is no stupid question, but our team here finally decided with a solution to our long pending issues with few of the discoverer report. To Proceed further, we would like to know, how to submit a concurrent request from Discoverer report?
We are looking for calling a package from the Disco admin by passing the parameters from the disco to the 6i report.
All help us in this regards are much appreciated.
Kindly help us in the same!
Thanks
Arun

Thanks Rod for confirming the same.
I will be trying the same today and will let you know if I succeed in doing it.
If I can share the actual requirement with you, it goes like this.
"I will be triggering the Oracle 6i standard AP Trail balance report through the Disco report. The standard report will be inserting the required data to one of my custom table. Once the concurrent program completes normal, my custom table will be having the required data to create the workbook specific to the current run of the concurrent program.
The one problem which I think could happen is, How can I make my disco report to wait till the standard program to complete in normal so that my disco report can be generated with the data from custom table.
Will the above requirement is possible If I follow the way you mention in the PDF or Could you suggest a better way for achieving the same.
In short, my requirement is: The custom table(say XX_TABLE) will be populated with data when the standard 6i report is run and the disco admin will be making of the custom table (XX_TABLE) to generate the report.
Please advice.
Thanks
Arun

I see this was not answered or any info on the web site so I will ask again "How do I completely remove CC from my computer"

I see this was not answered or any info on the web site so I will ask again "How do I completely remove CC from my computer"?
And don't talk about CC cleaner.
Howard

Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/HT1923

How can I permanently remove apps from my ipad, iphone and ipod (which are in icloud)?

How can I permanently remove apps from my iphone, ipad, ipod operating in the iCloud?

Apps don't operate in the cloud - they're either downloaded to your device, or they're in your Purchased list. You can't permanently remove the history of apps you've purchased, but you can hide them. See this link:
http://support.apple.com/kb/HT4919
Matt

How can I completely remove iMessage from a iPad?

Sorry I posted this a minute ago but I am not sure it did go through. Let me post another one here...
How can I completely remove iMessage from a iPad? I know how to turn off iMessage on settings but I don't want the iPad to know my iPhone number at all. How? Thanks! Jay

jay.song wrote:
Sorry I posted this a minute ago but I am not sure it did go through. Let me post another one here...
How can I completely remove iMessage from a iPad? I know how to turn off iMessage on settings but I don't want the iPad to know my iPhone number at all. How? Thanks! Jay
Other post is here:
How can I completely remove iMessage from a iPad (generation 2)?

How can I completely remove iMessage from a iPad (generation 2)?

How can I completely remove iMessage from a iPad (generation 2)? I know how to turn off iMessage on the iPad but I don't want this iPad to know my iPhone number at all. Thanks.

You can't. Default Apple Apps cannot be removed. If you sign out of your Apple Id in Settings->Messages->Send & Receive->Apple ID then the iPad will have no knowledge of your Phone number.

How do I completely remove Lightroom from my iMac?

How do I completely remove Lightroom from my iMac?

Hi,
Do you mean you would like to remove Azure Backup Agent?
If so you can remove it in Control Panel:
Press the Windows logo key + Q to open the Apps menu, and then click Control Panel.
Under the Programs item, click Uninstall a program.
In Uninstall or change a program, click Azure Backup Agent.
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

HT201250 How to recover mails of outlook from time machine

How to recover mails of outlook from time machine

This worked for me:
From Time Machine, restore a good backup of the entire "/Users/james/Library/Application Support/Address Book" folder to a different location, like to a folder on your desktop.
(note: the Library folder typically won't show up in Finder. To make it visible, in Terminal, issue this command:
        defaults write com.apple.finder AppleShowAllFiles YES
        then restart Finder: killall Finder )
Go offline. Do whatever you need to do to get completely disconnected from the internet (turn off Wireless, unplug the ethernet cable, etc.). Otherwise, iCloud will immediately overwrite your restore.
Delete the real folder: /Users/james/Library/Application Support/Address Book
Copy your restore (at the different location), to the real location ( /Users/james/Library/Application Support/Address Book )
Restart Contacts. Your restored data you want should be there. Before going online again, Export all these contacts (File - Export - etc...)
Go online again. iCloud will wipe out your Address Book with what's on iCloud. Re-import contacts as needed from your Export.

How can I hide a worksheet in a workbook in Numbers 1.5 for iPad?

How can I hide a worksheet in a workbook in Numbers 1.5 for iPad 2?

Numbers for the pad, as near as I can tell, does not do hidden sheets. There are some options though.
1. You can narrow the columns to the point that they are unreadable.
2 you can open and store those sheets is a different app, such as docs to go or quickoffice. Bury that app in a folder that would not be found easily.
To see the numbers help section, open numbers, tap the wrench and tap help.

How to recover my business files from a formatted removable drive?

I need to recover my business files from my formatted drive accidentally. I know I am stupid. I am using Windows XP. It is a Toshiba 500GB external hard drive.
Is there anyone that can help me to restore my files back? The inner files are really important to me. Help, please!

Well! If you really know little about data recovery stuff, I think I could help.
Actually, after you Google “data recovery tools” on the internet, you could see plenty of data recovery tools available online. Some of them are free, some of them are not. You should put much more attention to this point and make a wise
decision according to your won needs.
Here are some freeware for you:
http://www.piriform.com/recuva
http://www.formatrecovery.blogspot.com/2013/02/recover-data-after-formatting.html
Here are some paid tools for you:
http://www.techsupportalert.com/best-free-data-recovery-file-undelete-utility.htm
You should read these articles to know more information about data recovery stuff and select a right one:
http://en.wikipedia.org/wiki/Data_recovery
http://en.wikipedia.org/wiki/List_of_data_recovery_software
Thank you for your prompt replies. I will try your recommended tools latter. Thank you very much!!!!!

How to recover the autocomplete data from a Time Machine backup?

How to recover the Safari 5.1.7 autocomplete data from a Time Machine backup on Mac OS X 10.6.8 (Snow Leopard)?
To solve other issues (Safari crashing sometimes when saving web pages), I selected:
Safari - Empty Cache
Safari - Reset Safari - Selected ALL - Reset
I could later on recover some Safari autofill data restoring
HD/Users/~/Library/Cookies/Cookies.plist
HD/Users/~/Library/Safari/Form Values
HD/Users/~/Library/Safari/History.plist
but other autocomplete data is missing, including the one when filling web form search fields in web pages, for instance, and also some username and password login data on some web sites.
How to restore all such data from the Time Machine Backup?
Thanks!

I also recovered:
HD//Users/~/Library/Keychains/login.keychain
What else should I recover?

HT4859 Last time I synced my IPad with my PC it migrated all my "Favorites" (about 100 folders) to the ICloud. I have searched and so far been unable to find out how to recover my "Favorites" list from the ICloud back to my PC. Any advice? Many thanks.

Hi, Last time I synced my IPad with my PC, it (unknown to me) migrated all my PC "Favorites" (about 100 folders) to the ICloud.
I have searched and so far been unable to find out how to recover my "Favorites" from the ICloud back to my PC. Any advice would
be appreciated. Thank you.

What did you do to get them synced to the Cloud. Would that procedure help me get my favorites synced to my iPad2?

How to recover a TM backup from a NAS drive

I am using a MBPro from 2011. I lost a lot of family pictures due to my iPhoto library loosing the connection to the original hi-res files. At the moment I try to recover those with Data Rescue4 but it looks I lost quite a lot.
Now, I do have the following situation:
Until March 2014 my iPhoto Library resided on my Mac HDD
The HDD broke and had to be exchanged
So I moved the iPhoto Library onto a newly bought 2TB external HDD that I connect via USB (a WD MyPassport Ultra)
Now due to the situation described above, I need to recover the last iPhoto Library that resided on my Mac, but which was never used in iPhoto since the hardware crash
When I open iPhoto and then TimeMachine, it does not offer me to recover pictures from that last backup, which is from March 2014 and is about 135GB large. I assume the reason is that I haven´t used it in iPhoto, so iPhoto can´t know.
The TM backup on my NAS, a 4TB Seagate Central is 1,2 TB large. The seagate central cannot be connected to a Mac via USB or wire. According to it´s description, the only way to get data on and off is via ethernet. Having read that TM does not support backing up from a NAS, I assume I need to copy the 1,2 TB backup TM file onto another external HDD that I can attach via USB. Is this correct ? Does this help ?
And then I would need to recover it - but how given the situation above ??
I am pretty desperate meanwhile as I´ve been working on this for the last four weekends...
Within the process of data recovery I bought iPhoto Library Manager, PhotoSweeper and DataRescue4 in order to help recover the data. But I don´t know if this helps here. I´ve tried everything to recover my old files with those tools already.
I would very much appreciate your advice on how to recover my TM backup.

You can or should be able to recover the iphoto library directly from the NAS.. you do not need to copy it to a disk.
TM cannot create a backup from a network source.. but it is very happy using a network target.
Our friend Pondini wrote extensive notes on recovery of various important files using TM
See Q15 here. http://pondini.org/TM/FAQ.html
There is a link in there to recovery of iphoto in particular under various OS.. but the guy died before Yosemite was inflicted on the Apple Community.
TM has never worked particularly well since Yosemite.. so I can only offer my hope that the method still works..
Here is an example of recovery manually of iphoto library from TM backup I did to show how it is done.
Can't access old files on time capsule
In Yosemite you might be able to simply right click on the file in Finder.. and it bring up an option to recover it from TM.. of course that would assume TM was going to actually work and that is a bridge too far for Yosemite.
In the end.. you can of course do a full recovery to a USB drive plugged into your computer.. I have also used that method to get around issues with finding stuff from old backup.. however IMHO the manual method of digging through the backup offers you the best chance of recovery.
Do protect the TM sparsebundle.. in the end that is the only connection back to you files you have.. so saving a copy of the sparsebundle to a USB drive is not a bad idea.. Certainly do nothing in terms of manipulating the sparsebundle.. you can extract files from it.. copy it to another location.. but make no changes to original sparsebundle on the network drive whatsoever.. so do not continue backups to it or anything like that.
My strong recommendation btw since Yosemite or even Mavericks was to use Carbon Copy Cloner.. and make a bootable backup of your main operating system and any other drives.. You would not be in this mess if you had .. so for future reference.. TM is not really adequate.

How to recover Inadvertently removed Worksheet from Discoverer workbook.

Similar Messages

Maybe you are looking for