How to recover mailbox details in Exchange server 2007
Hi,
Problem is Exchange server 2007 user mailbox has been deleted and it’s already purged. Now we need to recover that mailbox. Is there any way to recover purged mailbox in Exchange server 2007?
Or we are planning create new mailbox and help me to find old mailbox server and database details then I will restore data from backup. Please suggest if you have better idea than this one. Thanks
I would suggest using one of your backups and creating a recovery database and pulling the users mailbox from that recovery database.
http://www.msexchange.org/articles-tutorials/exchange-server-2007/high-availability-recovery/Working-Recovery-Storage-Groups-Exchange-2007.html
Similar Messages
-
How to install and configure ms exchange server 2007 both role hub and edge transport role in one network
Hi,
Edge role is design for perimeter networks, to keep security risks minimum. So it’s not recommended to have edge role in internal network. Must have separate network or subnet for edge services.
If you are playing around it in labs, then you can put edge role within same subnet as other exchange roles and no specific requirements in that case.
Thanks.
MachPanel - Premium Cloud Automation Solution -
Exchange Server 2007 down how to recover immediately | Urgent.
Hello All,
My Exchange Server 2007 is down and there is physical server failure.
Please suggest me how to restore it immediately.
I have backup of Databases but how to build an new server immediately.
Any option to recover exchange from the exchange media.
All the suggestion are appreciated.
Thanks,
Arif.Hi Arifuddin
Thank you for your question.
You can refer to the following :
http://windowsitpro.com/exchange-server/recover-your-exchange-server-2007-environment-16-steps
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety,
or suitability of any software or information found there. Please make sure that you completely understand the risk before retrieving any suggestions from the above link.
If there are any questions , please let me know.
Best Regard,
Jim -
How to move all emails from mailbox to an external email account in Exchange Server 2007?
I have a user who is leaving the university in a few days. The user would like to forward all of their old emails from their mailbox to their G-mail account. Will setting up email forwarding forward all of the old emails to the G-mail account or just the
new emails that are received after setting up email forwarding? If forwarding isn't the correct solution; then what is? We are running Exchange Server 2007.No, as you've suspected the forwarding will only affect new messages coming into the mailbox, not existing ones. Additionally, if you did get all existing messages to forward to another account (you could probably do it by creating a rule in Outlook) then
the gmail account would show every single one of them as arriving now, and lose their existing send date.
Probably a better option would be to export the mailbox to .pst, and then assuming the user has their gmail account configured in Outlook somewhere as something other than POP3 they can then open the .pst file on their machine and copy the messages over
to their gmail account, which I think would also preserve the original information.
You could do that via the server using Export-Mailbox as described here
http://technet.microsoft.com/en-gb/library/bb266964(v=exchg.80).aspx (note it has to be run from a 32-bit OS with the Exchange Management tools installed), or the user could just as easily do it themselves from within Outlook using the Export option. -
Hi, in our Enterprise environment, we have a single mac with Mavericks version 10.9.2 and Office for Mac 14.4.1. When setting up outlook, we are trying to connect to a mailbox on exchange server 2007. We put in the EWS details in the server field since our autodiscover function is not functioning. But still it doesn't work. There are no errors, no popups. We turned on the logging and in the logs, it says a error of -3259. We are stuck and any help will be really appreciated.
I have a customer experiencing exactly the same issue. Their computer is running Windows 7 Pro with Office 2007 SP3. After seemingly exhausting all troubleshooting options, I backed up their data, formatted the hard drive and performed a clean install of
Windows and all their applications. It didn't solve the problem!
What's strange is the customer also has a laptop computer, running the same version of Outlook, and that doesn't experience any problems connecting to Office 365 on the same network.
My next step is to send the customer a new ADSL modem/router to try.
I have another customer on Office 365, also running Outlook 2007, and they also experience issues with emails sitting in the outbox while Outlook displays the status message “Outlook is trying to retrieve data from the Microsoft exchange server outlook.office365.com.”
In this case Outlook doesn't freeze/stop responding, like it does for the first customer I mentioned. -
Need Documentation on how to intehrate Exchange server 2007 with SAP portal
hi,
i need some documentation on how to integrate microsoft Exchange server 2007 with SAP portal.
can anybody help?Hi Payel,
Pls check the links below..
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/7a/ec015c8446d447a83776d40f31c84f/content.htm">Link</a>
Note : As specified in the document, only the following versions of Microsoft Exchange server are supported:
● Exchange Server 2000
● Exchange Server 2003
Regards,
Venkat. -
How to setup microsoft outlook 2011 with exchange server 2007
How to setup microsoft outlook 2011 for Mac with Exchange server 2007?
The folks who set up the Exchange Server should be happy to help you.
-
Backup Issue of exchange server 2007 mailbox store
Dears
Exchange server 2007 with CCR clustering
I have got a problem with the backup of one of my mailbox store. Its going till the last and giveing the final error as follows:-
V-79-57344-65247 - A failure occurred reading an object.
Also the warning as follows:-
Backup- \\mailserver.domain\Microsoft Information Store\First Storage Group
WARNING: "\\mailserver.domain\Microsoft Information Store\First Storage Group\Database" is a corrupt file. This file cannot verify.
Backup V-79-57344-34108 - An unexpected error occurred when cleaning up snapshot volumes. Confirm that all snapped volumes are correctly resynchronized with the original volumes.
Does it mean my information store is really a corrupted file. It has been properly monted and logs are genearting.
Even when I checked the last full backedup log file from the management shell it clearly shows the backing up is properly happened on the log files.
When I checked the event log of Exchnage server I can see these logs:-
Event ID 401, 403 errors
The size of the problem store is 308 GB.
One of the other store with 46 GB is backing up without any issueHi,
If you have a space issue with the Exchange server, you can upgrade drives on active node and passive node one by one. It is not recommended to upgrade them at the same time.
For more information about upgrading Exchange 2007 CCR active node or passive node, here are some helpful threads for your reference.
Upgrade hard drives on passive node. Process and procedure
http://social.technet.microsoft.com/Forums/exchange/en-US/08b9e893-87c9-48c3-bab2-91027cc09949/upgrade-hard-drives-on-passive-node-process-and-procedure?forum=exchangesvravailabilityandisasterrecoverylegacy
Upgrading hard drives in exchange server
http://social.technet.microsoft.com/Forums/exchange/en-US/0e4514f9-76da-44d2-9dec-a3be5add79b1/upgrading-hard-drives-in-exchange-server?forum=exchangesvravailabilityandisasterrecoverylegacy
Hope it helps.
Best regards,
Amy
Amy Wang
TechNet Community Support -
How used single ssl for tow exchange server without clustering
how used single ssl for tow exchange server without clustering
exchange 2003 std fron-end server
used for add new server for owa failover or standbyOlivia, hopefully by now you have solved your issue but just for the sake of answering that question here so that people having the same issue can later find it I'll go through the motions:
there are a couple of ways you can achieve this.
A. get a certificate for free out there
B. generate your own self signed "fake" certificate.
certutil will certainly let you do this, here's how:
1. First, create a file/directory layout to store your certificates
mkdir -p /path/to/certificates/selfsignedCA2. Initialize a database for the certificate you want to create
certutil -N -d /path/to/certificates/selfsignedCA -P "ca-"3. Create a self-signed CA certificate
certutil -S -x -n "ca-cert" -s "cn=SelfSigned CA Certificate,dc=yourSuffix" -t CTPu -v 120 -d /path/to/certificates/selfsignedCA -P "ca-" -5Note: when prompted, select choice (5) SSL CA and 'y' for critical extensions
4. Export the your newly created self-signed CA certificate in PEM format
certutil -L -d /path/to/certificates/selfsignedCA -P "ca-" -n "ca-cert" -a > /path/to/certificates/selfsignedCA.pemthat should get you going
-=arnaud=- -
Exchange Server 2007 Transport Agent Issue
This is the first time i am working on Exchange Server Development. Below is a simple Transport Agent that i am using, this agent should simply update the email Subjects
as shown below in the code.
using System;
using System.Collections.Generic;
using System.Text;
using Microsoft.Exchange.Data.Transport;
using Microsoft.Exchange.Data.Transport.Smtp;
namespace MyAgents
public sealed class MyAgentFactory : SmtpReceiveAgentFactory
public override SmtpReceiveAgent CreateAgent(SmtpServer server)
return new MyAgent();
public class MyAgent : SmtpReceiveAgent
public MyAgent()
this.OnEndOfData += new EndOfDataEventHandler(MyEndOfDataHandler);
private void MyEndOfDataHandler(ReceiveMessageEventSource source, EndOfDataEventArgs e)
e.MailItem.Message.Subject = "This message passed through my agent: " + e.MailItem.Message.Subject;
Below is the Powershell script i am using to install the Agent.
Net Stop MSExchangeTransport
Install-TransportAgent -Name MyAgent -AssemblyPath EmailLogger.dll -TransportAgentFactory MyAgents.MyAgentFactory
Enable-TransportAgent -Identity MyAgent
Net Start MSExchangeTransport
Agent installed successfully using Exchange Management Shell.
Now when i send/receive emails in exchange, Email subjects are not modified. Emails have their original subjects. I don't know why?
I also performed the steps mentioned in below links to debug the Agent but breakpoints are not being hit by Visual Studio Debugger.
sf-tools.net/Messaging/tabid/55/EntryId/163/Exchange-2010-Transport-Agent.aspx
stackoverflow.com/questions/12347123/debugging-ms-exchange-2007-transport-agent
omarjames.com/blog/index.php/debugging-exchange-transport-agent/
My System Configuration
I am using the Exchange Server 2007 Virtual Machine provided by Microsoft from link below
microsoft.com/en-pk/download/details.aspx?id=14901
I also installed the Visual Studio 2008 on the VM for debugging.
Please help me in resolving the issue?How are you testing this ? a SmtpReceiveAgent will only fire when the server receives email over SMTP. So if your just logging on and sending an Internal Email (eg mailbox to mailbox) or sending Email externally then the
SmtpReceiveAgent wont fire. For a single server if you want to capture all email you need to use a router agent see
http://blogs.technet.com/b/postwoman/archive/2010/09/14/step-by-step-how-to-create-a-routing-agent.aspx
. If you want to test what you have try sending an email to mailbox over SMTP using an SMTP client or Telnet
http://exchange.mvps.org/smtp_frames.htm
Cheers
Glen -
Provisiong of users from OIM to Exchange Server 2007
Hi,
I am trying to Provisioning the users from OIM 9.1.0.1 to Exchange server 2007. For this i used Exchange Server Connector 9.1.1.1.0. By using AD_Base_connector 9.1.1.0.0 i can
provisioned the user details. But while provisioning to the Exchange server 2007 i am getting the following error
ERROR [XELLERATE.WEBAPP],Class/Method: tcLookupFieldAct ion/lookupByColumn encounter some problems: lookup Error in OIM
And i am unable to get the LookUp detais for the MailBox in Design Console as well as in the ScheduleTasks in OIM Admin Console..
Can anybody help me in solving this issue.
Thanks & Regards
SRIHi suren,
i am using the Remote Manager. I enabled logs in log.properties in both OIM server and Remote Manager.
I am observing the following message in Remote Manager command prompt.
DEBUG,30 Mar 2010 01:12:44,437,[XELLERATE.REMOTEMANAGER],Class/Method: RMISSLCli
entSocketFactory/createSocket left.
and i am getting the error in Weblogic server command prompt.
Running ISADAM
Target Class = java.lang.String
Running GETATTRIBUTEHASH
Target Class = com.thortech.xl.util.adapters.tcUtilHashTableOperations
Running Set User Attributes
ERROR,30 Mar 2010 01:13:39,484,[XELLERATE.WEBAPP],Class/Method: tcLookupFieldAct
ion/lookupByColumn encounter some problems: lookup Error
can u help me in resolving this issue.
Thanks in Advance,
SRI -
MimeMessage.reply() issue with MS Exchange Server 2007 Emails
I have an application that retrieves emails from an MS Exchange Server 2003 mailbox. The data from each message is read, validated and conditionally loaded to a table. If the message doesn't pass validation, a rejection email is sent back to the sender with an error message and a copy of the email. (We're using Java 1.5. However, I test with both 1.5 and 1.6.)
Also, if the message passes validation, positive notification is sent back to the sender.
Both processes use the method: javax.mail.Message.reply()It's coded as:
MimeMessage reply = (MimeMessage) message.reply(false);My organization is in the process of migrating to MS Exchange Server 2007. We've found that the reply() method no longer finds the sender method, thus unable to create a reply message. The error message we receive is:
javax.mail.SendFailedException: No recipient addresses
at javax.mail.Transport.send0(Transport.java:110)
at javax.mail.Transport.send(Transport.java:80)
at org.ccci.gms.datacollector.DataCollector.sendReply(DataCollector.java:514)
at org.ccci.gms.datacollector.DataCollector.processMessages(DataCollector.java:162)
at org.ccci.gms.datacollector.DataCollector.main(DataCollector.java:101)After creating the MimeMessage object from the reply() method, I printed out the email header detail from both 2003 and 2007 messages. You'll note from below that the "To" or recipient address is missing from Server 2007.
MS Exchange 2003 works fine
From: [email protected]
To: [email protected]
Subject: Re: Report
In-Reply-To: <[email protected]>MS Exchange 2007 no longer works
From: [email protected]
Subject: Re: Reports
In-Reply-To: <[email protected]>I know I could just use the "addRecipient()" method to get around this problem. I wanted to know if anyone has encountered this issue. Please share the resolution. Any suggestions will be greatly appreciated.
Thanks,
LaelWWhen the original message is accessed using IMAP, the reply method uses the information in the
IMAP ENVELOPE to determine where to send the reply. It first looks for the Reply-To address
in the ENVELOPE, then the From address.
Interestingly, when not using IMAP, the getFrom method returns the Sender header if the From
header is empty. The IMAP-specific code doesn't do that, although perhaps it should.
It would be interesting to compare the ENVELOPE data from the protocol trace in the two cases.
The ENVELOPE data will follow this syntax:
envelope = "(" env-date SP env-subject SP env-from SP
env-sender SP env-reply-to SP env-to SP env-cc SP
env-bcc SP env-in-reply-to SP env-message-id ")"
So it's the first three address fields after the Subject that are relevant. If the From and Reply-To
fields are NIL, but the Sender field has a valid address, let me know. I should probably fix the
IMAP provider to fall back to the Sender field if the From field is missing. -
Exchange Server 2007 shows email as "Receive" but not "Deliver"
Hi Guys
We have Exchange Server 2007 inside of a SBS 2008 set up.
One specific email from a regular sender wasn't received by the recipient. The recipient is used to receiving messages from this sender and the email is not hiding within Outlook.
Exchange 2007 mail tracker shows the email was received, but that's it. Nothing has happened to the email after that. Normally we'd see a "Deliver" report, or possibly a "Fail", but always something to show the email has been actioned
in some way.
The queues are all empty.
So, this one email has disappeared into the ether of Exchange! So far as I can see, this is the only email with only a "Receive" notification. All others have something else immediately following the Receive.
The Server has GFI anti-spam installed, but that hasn't seen the email either, because emails are collected by Exchange before being passed to GFI. In this instance it hasn't been passed, or returned to the sender as undeliverable. It just seems
to have been eaten.
Would anyone have any sensible suggestions on where to start kicking this email back into life?Hi Simon
Apologies for the late response, but I only get to this client once a month.
1. Did the sender get NDR? ~ No
2. Let the receiver check the email via OWA and see
whether the email is available. ~ Still not available
3. Use MFCMAPI to check the user mailbox, can you
find the missing email? ~ I haven't yet worked out what is MFCMAPI or how to use it to check, but I suspect that as the Exchange email tracker doesn't have any actions after "Receive" that it cannot have sent the email on to the user's mailbox or rejected
the email as non-deliverable.
The client isn't too willing to expend too much effort
/ cost on this issue which does appear to be a one-off glitch, but I am interested in resolving it for myself as I haven't heard of this problem before.
Thanks for the interest,
Michael D -
Dear all,
Presently we are using exchange server 2007 Sp3 along with windows 2008 x64 Domain controller it's working fine . But we have some issue related with
Message Size restriction when I changed maximum msg size sent and receive this option will applied to the mail box user taking long time how can i update this option immediately to the end users ?
Best Regards
SubashHi,
After you configure the mailbox size restriction for a mailbox, the configured limits are enforced after a period of time, but do not take effect immediately. Restarting the Microsoft Exchange Information Store service causes the configured limits to take
effect immediately.
Please restart the Microsoft Exchange Information Store service to check result.
Here is a related article about this issue for your reference.
http://technet.microsoft.com/en-us/library/bb684892(v=exchg.80).aspx
Best regards,
Belinda Ma
TechNet Community Support -
Grant Application Impersonation Rights for UPN on Exchange Server 2007
Hi,
I would like to know , how to grant application impersonation rights for UPN account in exchange server 2007 . As i am working for mailbox migration , i should have this rights . I can do impersonation rights for domain\username but not for [email protected]
Please anyone help me , how to grant permission for [email protected] .
Big thanks in advance.
.Thanks & Regards,
vinothHi,
I have a test in my environment using Exchange 2007, you can use the following cmdlet to assign Application Impersonation rights to an account using UPN.
Get-ExchangeServer | where {$_.IsClientAccessServer -eq $TRUE} | ForEach-Object {Add-ADPermission -Identity $_.distinguishedname -User (Get-User -Identity
[email protected] | select-object).identity -extendedRight ms-Exch-EPI-Impersonation}
Get-MailboxDatabase | ForEach-Object {Add-ADPermission -Identity $_.DistinguishedName -User
[email protected] -ExtendedRights ms-Exch-EPI-May-Impersonate}
Note: Please change the "[email protected]" to the UPN you want to use.
Hope my clarification is helpful.
Best regards,
Amy Wang
TechNet Community Support
Maybe you are looking for
-
How can i find printer e-mail address for e-print
I have the 8500A premium Officejet Pro Its taking forever to register e-print How do I get printers email address to e-print
-
Hi. Can I display the following .HTM from a button on my form? /usr/IBM/WebSphere/AppServerCommunityEdition/repository/default/TTMSWeb/1222365662123/TTMSWeb-1222365662123.war/adds_reporters.htm Is there a built-in for this?
-
Mountain Lion Graphics Apps Crashing
I have a new MacBook Pro that came loaded, unfortunately, with Mountain Lion. After dealing with everything from no connectivity, to a second monitor that no longer could be hooked up, things were working relatively well. Suddenly, now, however, when
-
Hi all, I'm a bit stuck here....I can't see where I can remove the 'Join' and 'My Account' options at the very top of this page. It isn't in the template and I can't find it any of the Content Holders? Any ideas? Cheers
-
Today I purchased a 1TB Time Capsule. I was ill informed that our previous router also had the modem built in to it. So we bought the time capsule and spent 3 hours trying to set it up only to figure out that we needed another modem for the time caps