How to Recover Multiprovider if Active Version NE Revised Version
Hi,
We are doing NW2004s upgrade. While activating the Multiprovider I found that it has loast key figures and Nav Attributes.
When I go to Previous version(Version Comparison) I see the Keyfigures.
How to recover those key figures of Multiprovider?
Thanks
Rupesh
Hi I have resolved this issue.
I went to Version = active mode of this multiprovider.
It was active and all key figures were available. captured this into transport and imported to same system.
Thanks
rupesh
Similar Messages
-
I bought walking dead the game multi pack but I wasn't able to play with it. I tried to remove and reinstall it but things get worst because the paid app was lost and what's left was the free version. Any suggestion how to recover it?
How to Get a Refund from the App Store
-
How do I recover all the pictures from the iPhoto version immediately before 9.4.1? I have a full system backup version from about one month before the switch , and mistakenly thought the new iPhoto would default to all my pictues as they were. I also have backups made in Time Machine.
Have you tried what's shown here? I suspect this will solve your issue.
http://support.apple.com/kb/HT4927 -
I uninstalled firefox then reinstalled firefox. because I did not like a couple of add-ons that I wanted to remove. I thought I would still have all of my bookmarks. However, all my bookmarks were cleaned out with the new installed version. Then I tried to Repair Windows in System Restore to back track a few days in hope to recover the old version of firefox. It did not get back the old version and no bookmarks. I still get the new version with no bookmarks. Please advise me how to recover my bookmarks.
A possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
* http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox -
After,using,CS,for,one,year,I,must,have,an,activation,code,,the,trial,version,will,be,end, over,25,days.,How,is,it,possible?,What,can,I,do?
Was the iPad originally set up on a different computer, and hasn't been synced to the one that you are now trying to use ? There are some instructions on this page for syncing to a new computer : https://discussions.apple.com/docs/DOC-3141
(Before trying that you could copy any important files/documents off the iPad so that you have you own backup copy of them e.g. depending upon what the apps support then email them to yourself, use Dropbox, copy them to your computer via your wifi-network.)
You should be able to copy iTunes purchases off the iPad and over to that computer's iTunes via File > Devices Transfer Purchases, but if you have music from other sources (e.g. copied from CDs) which aren't in that computer's iTunes (and you haven't got a backup to copy them onto it from) then there are some programs listed half-way down this page which should be able to copy them back : https://discussions.apple.com/docs/DOC-3991
For recovery mode, that will result in your iPad being put back to factory defaults i.e. all of your content will be removed from it -
Good morning friends, I have a problem with my iphone 4s since I get a screen that just light it says "Activation Required" restored it and not corrected, I bought my factory unlocked iphone, how I can fix this, I had installed the version 6.0 as developer to
If you have a beta copy of iOS6
1. You are a developer and will know how to transition from beta
to release version and to use the Develpoer forum
2. You have a pirate copy of the beta and no-one on this Apple hosted Forum can help you
try Google -
I just recovered my serial number for Acrobat 8 from a chat session with Adobe. How do I download Acrobat? Version 8? Version XI?
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5.6| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'. -
How to recover a missing program
Hi guys
Im facing an issue on our SLM system where one of the Z programs is missing. I've checked on SE38 and the program is not listed. I have tried to check on Version Management but there are no previous versions.
The only activity was a EHP 1 Upgrade, but there are no indications where this program was modified or deleted.
I've checked the table TADIR and is present. Also checked table TSTC for the transaction name ZPWC and is also in there.
Since i dont have the original transport since its was brought from an external system, I'd like to check with you guys any idea on how to recover this program. I dont have any clue on how is missing since its not a developement system.
Any recommendation on how to restore/find this program, would be highly appreciated.
Martin
PS: Also Checked in table VRSD if there is an entry with OBJTYPE = u2018REPSu2019 and OBJNAME = name of the deleted program and no luck.
Edited by: Martin Simois on Jan 5, 2011 7:06 PMI think you will have to go back to the original development system. The versions will be there.
Rob -
How to recover the mailboxes from the decommissioned exchange db .
Hello All,
I have 2 EDB files on my exchange server which is no longer active its been decommissioned and the EDB mailbox is dismounted,
I would like to recover few emails/mail boxes from the EDB file and am not able to find any free tool which can help me in recovering the emails,
1. How to recover the mailboxes from the decommissioned exchange db
2.Tried using from free 3rd party tools which helped me view the mail boxes however am unable to convert or recover the emails using the demo/ trial version and cant think of buy/purchasing the application since its very expensive $299 and $399
I know there are lot of exchange gurus here who can help me with some workaround in recovering the mailboxes from the EBD or on how to convert the edb file to pst
Looking forward to get some help from exchange gurus
Thanks,
Jean
JeanHello All,
I have 2 EDB files on my exchange server which is no longer active its been decommissioned and the EDB mailbox is dismounted,
I would like to recover few emails/mail boxes from the EDB file and am not able to find any free tool which can help me in recovering the emails,
1. How to recover the mailboxes from the decommissioned exchange db
2.Tried using from free 3rd party tools which helped me view the mail boxes however am unable to convert or recover the emails using the demo/ trial version and cant think of buy/purchasing the application since its very expensive $299 and $399
I know there are lot of exchange gurus here who can help me with some workaround in recovering the mailboxes from the EBD or on how to convert the edb file to pst
Looking forward to get some help from exchange gurus
Thanks,
Jean
Jean
Hello,
There are so many third party software available in Web that can easily fix your Exchange Database issues, you can check out such a software from here http://www.exchangerecoverytools.org . By using this software (Kernel for Exchange Server Recovery),
you can immediately repair and convert damaged EDB to PST files. -
Table Truncated, Flashback is enabled ... How to recover.
Hi,
There is a table which was truncated, as we have flashback enabled. Even we have previously enabled row movement of the particular table.
How to recover ????
Thanks.hi,
There are three options available:
1. Restore and recover the primary database to a point in time before the drop.
This is an extreme measure for one table as the entire database goes back in
time.
2. Restore and recover the tablespace to a point in time before the drop.
This is a better option, but again, it takes the entire tablespace back in time.
3. Restore and recover a subset of the database as a DUMMY database to export
the table data and import it into the primary database. This is the best option
as only the dropped table goes back in time to before the drop.
For the first, see information on performing incomplete recovery on a database.
The second and third options are virtually the same, it depends if the entire
tablespace data should be taken back in time, or just recovering the one table.
The tablespace point in time recovery (TSPITR) may be useful if there are
dependencies between the dropped/truncated table and other tables in the
database. For the second option, see RMAN documentation on TSPITR and/or Note 180436.1 RMAN Tablespace Point in Time Recovery Example. Both procedures
for the second and third options are very much the same. The differences are
that the TABLE PITR has to be exported/imported manually while the TABLESPACE
PITR is fully automated by RMAN.
This article will deal with the third option.
General overview of procedure to recover from a DROP or TRUNCATE table by using RMAN.
To recover from a dropped or truncated table, a dummy database (copy of primary)
will be restored and recovered to point in time so the table can be exported.
Once the table export is complete, the table can be imported into the primary
database. This dummy database can be a subset of the primary database. However,
the 'dummy' database must include the SYSTEM, UNDO (or ROLLBACK), and the
tablespace(s) where the dropped/truncated table resides.
The simpliest method to create this 'dummy' database is to use the RMAN
duplicate command. See:Note 228257.1 RMAN Duplicate Database in Oracle9iNote 73912.1 RMAN Creating a Duplicate Database -- Oracle8i
The difference between the two versions is that Oracle9i duplicate command
allows for a 'SKIP TABLESPACE' option. Thus Oracle9i allows for a duplication
of a subset of the database.
In Oracle8i, you cannot 'skip' tablespaces when using duplicate, so you must
duplicate the entire database. If this is not a desired option, or you must
restore the original database and thus cannot use
the rman DUPLICATE.
NOTE: The remainder of this information is for users who cannot use the
DUPLICATE command in Oracle8i. I.e., you want to restore only a subset
of the Oracle8i database.
Requirements :
a) RMAN backup of the primary database should be available to the
host where it has to be restored on.
b) Use of an RMAN-catalog database
c) Auxiliary instance created and started in NOMOUNT
(See Note 180436.1 step I. Create the auxiliary initSID.ora.)
Create this from the init.ora of the primary database and:
!!!!! IMPORTANT !!!!!!!!
If using the same host as the primary, be VERY careful as you do not want to
restore on top of existing files being used by the primary (production database).
Doing so can corrupt and crash the production database!!!!!!
- be sure all paths for this AUX instance are different than primary.
- be sure CONTROL_FILES parameter has different location but more importantly DIFFERENT NAME.
- add LOCK_NAME_SPACE to any value other than the primary database name.
- change/add SERVICE_NAME=AUX1.
- use the SAME DB_NAME as for the production database
- BE SURE you include the 'alter database rename file' command at the end
of the script. This changes the location and/or name of the online
redo log files.
d) Set ORACLE_HOME and ORACLE_SID set to the auxiliary instance
e.q set ORACLE_SID=AUX1
set ORACLE_HOME=<....>
!!!!! IMPORTANT !!!!!!!!
1: Restore and recover the tablespace
The restore and recovery is done by RMAN. Create a file
of the script below (e.q table_pitr.cmd) and execute the following
command :
$ rman cmdfile=table_pitr.cmd
NOTE: ORACLE_HOME and ORACLE_SID set to the auxiliary instance
NOTE: The Auxiliary instance IS the target to rman at this point.
The RMAN-script :
connect catalog rman/rman@v920_nlsu31
connect target /
run
allocate channel t1 type sbt_tape
parms='SBT_LIBRARY=/home/usupport/liblsm.so';
set until time "to_date( '09-10-2005 06:00', 'DD-MM-RRRR HH24:MI')";
restore controlfile;
sql "alter database mount clone database";
set newname for datafile 1 to '/fs01/oradata/tspitr/system01.dbf';
set newname for datafile 2 to '/fs01/oradata/tspitr/undotbs01.dbf';
set newname for datafile 4 to '/fs01/oradata/tspitr/tools01.dbf';
restore tablespace system, undotbs1, tools;
switch datafile all;
sql "alter database datafile 1,2,4 online";
recover database skip forever tablespace TEMP,INDX,USERS,OLTS_ATTRSTORE,
OLTS_CT_DN,OLTS_CT_CN, OLTS_CT_OBJCL,OLTS_CT_STORE,OLTS_DEFAULT,
OLTS_TEMP,OLTS_IND_ATTRSTORE,
OLTS_IND_CT_DN,OLTS_IND_CT_CN,
OLTS_IND_CT_OBJCL,OLTS_IND_CT_STORE,
P1TS_ATTRSTORE,P1TS_IND_STORE;
sql "alter database rename file ''/fs01/oradata/primary/REDO01.LOG'' to ''/fs01/oradata/tspitr/REDO01.LOG''";
sql "alter database rename file ''/fs01/oradata/primary/REDO02.LOG'' to ''/fs01/oradata/tspitr/REDO02.LOG''";
sql "alter database rename file ''/fs01/oradata/primary/REDO03.LOG'' to ''/fs01/oradata/tspitr/REDO03.LOG''";
/* NOTE: Syntax within rman is two single quotes around each name, this may be operating system specific. */
release channel t1;
Explanation :
- Tape channel allocated, but could also be a disk channel, depending
on where the backups are.
- SET UNTIL TIME
User specified time, just before the DROP/TRUNACTE table
- MOUNT CLONE DATABASE.
This forces all datafiles to be put OFFLINE. Just for safety reasons.
- SET NEWNAME
New path for the datafile to be restored. Keep in mind that this is
done on the auxiliary instance and should NOT interfere/overwrite the
prodution database.
- ALTER DATABASE RENAME FILE
This is required to change the location of the online log files. When the
'resetlogs' is issued, Oracle will create online logs based on specification
in the controlfile. This command changes the location and/or name. If
this is being performed on the SAME server, not issuing a rename will
cause Oracle to reset the production online log files. This will corrupt
and crash the production database!!!!!!
- RESTORE TABLESPACE ...;
Restore the tablespaces which need to be recoverd.
This includes always the SYSTEM, rollback/undo tablespace and
the tablespace(s)where the dropped/truncated table resides.
The SYSTEM tablespace is always included as it containts most / all of
the objects owned by SYS and SYSTEM. Some other tablespaces might be
included as well when they contain objects owned by SYS and SYSTEM.
SQL> select distinct tablespace_name
from dba_segments where owner in ('SYS', 'SYSTEM');
- SWITCH DATAFILE ALL;
Make the changes in the pathname (set by SET NEWNAME) active in the
controlfile.
- ALTER DATABASE DATAFILE ... ONLINE
Online the datafiles which are restored and have to be recovered.
- RECOVER DATABASE SKIP FOREVER TABLESPACE ......;
You need to specify the complete list of tablespaces which will not be
recovered. Else the recovery fails, that it cannot dentify/file the
tablespace datafile. The SKIP FOREVER clause causes RMAN to take the
datafiles offline using the DROP option. Only use skip forever when the
specified tablespaces will be dropped after opening the database. I.e.,
all tablespaces except the one which contains your data.
The recovery of RMAN, checks the datafileheaders, to get a starting point
for the recovery.
2: Open auxiliary database with RESETLOGS
$ sqlplus /
SQL> alter database open resetlogs;
This step should ALWAYS be executed outside RMAN via SQL*Plus. If the open
is executed in RMAN it may effect the primary database's entry in the RMAN
catalog. Backups will fail with messages like:
RMAN-20011 "target database incarnation is not current in recovery catalog"
3: Export the table
The database is recovered and open, so it can be used by export.
Example:
$ exp userid=system/<password> file=table.dmp
tables=(<owner>.<tablename>, ...) rows=Y
4: Import the export-dump
Import the data of the dropped table back into the primary/production database.
Example:
$ imp userid=system/<password> file=table.dmp ignore=Y
5: Remove this AUX/DUMMY database
Shutdown and remove all files associated with this database. It has satisfied
your purpose. I.e., to give you an export of this table. -
How to recover Outlook Express data, such as messages, the Address Book, mail accounts, and news?
Outlook Express Repair Toolbox software is selected utility to repair the damaged/broken emails from OE. It provides best DBX Recovery service for
chosen database including orphan files; afterward allows storing all revived files in EML, MSG, PST, RTF and DBX.
Offers search option to add file for healing process.
It includes understandable algorithm to recover DBX as well conversion in safe hands.
It is practicable with each Windows OS like Win 8.1, Win 7 (32 bit- 64 bit), supports all editions of OE, and MS Outlook.
Everybody efficiently can retrieve the lost emails plus can preserve the integrity.
Trial version of tool is activated for 15 emails but ample to satisfy.
Download -
http://www.outlookexpress.repairtoolbox.com/ -
How to recover the data from a dropped table in production/archive mode
How to recover the data/change on a table that was dropped by accident.
The database is on archive mode.Oracle Version. ? If 10g.
Try this Way
SQL> create table taj as select * from all_objects where rownum <= 100;
Table created.
SQL> drop table taj ;
Table dropped.
SQL> show recyclebin
ORIGINAL NAME RECYCLEBIN NAME OBJECT TYPE DROP TIME
TAJ BIN$b3MmS7kYS9ClMvKm0bu8Vw==$0 TABLE 2006-09-10:16:02:58
SQL> flashback table taj to before drop;
Flashback complete.
SQL> show recyclebin;
SQL> desc taj;
Name Null? Type
OWNER VARCHAR2(30)
OBJECT_NAME VARCHAR2(30)
SUBOBJECT_NAME VARCHAR2(30)
OBJECT_ID NUMBER
DATA_OBJECT_ID NUMBER
OBJECT_TYPE VARCHAR2(19)
CREATED DATE
LAST_DDL_TIME DATE
TIMESTAMP VARCHAR2(19)
STATUS VARCHAR2(7)
TEMPORARY VARCHAR2(1)
GENERATED VARCHAR2(1)
SECONDARY VARCHAR2(1)
SQL>M.S.Taj -
How to recover photos after restoring iPod touch?
Yesterday, there was an update for the iOS 6, I believe. When I pressed the update button, a message popped up saying that there was a problem with my iPod touch 4G and that I need to restore it. I had absolutely no idea why that message would pop up in the first place because my iPod was working just fine. But I couldn't update my iPod to the newest version if I didn't do what iTunes says... so I was about to restore my iPod, but then I was worried that all of my photos would disappear. So I decided to update my iOS later so that I could transfer all my files on to my computer. I then unplugged my iPod, and tried to turn it on but the home screen wouldn't pop - no matter what I did, all the screen showed was an itunes icon on top with a USB plug-in cord at the bottom. So I had no choice but to restore my iPod. The thing is, once I restored my iPod and all, my photos were all gone and I did not use iCloud as a back-up since a few months ago. All of my recent photos are now gone and I have no idea how to recover them. I've tried programs that aim to recover deleted photos, but they didn't work.
Is there a way to recover photos after restoring the iPod Touch?Hello,
It is very important to backup your device to the computer before updating or restoring.
You can restore your device to a previous backup, all the photos that were there when you made the backup should return with it, but I'm afraid that any photos taken or saved after the last backup are unrecoverable.
I hope this helps.
~Lt. Leviathan -
i just updated my iphone 4s with ios8.1.1 ....
after the updated version is installed when i tried to open my phone it show error on my passcode....
How to recover my passcode?Passcode cannot be recovered.
Forgot or Wrong Passcode
http://support.apple.com/kb/HT1212
Forgot Passcode use recovery mode to restore
http://support.apple.com/kb/HT1808 -
How to recover a Yoga tablet 2 with Windows 8.1
How to : Recover a Yoga tablet 2 version with Windows 8.1 Bing
In case of emergency, if you need this option , or other circumstances ... last hope ..
..works without keyboard ...
Yoga tab 2 as tablet itself ...equipped with three manual function buttons ,means not so many possible options left ...
Front Yoga Tablet 2 10" version with Windows 8.1
Shows micro HDMI and headphone out Yoga Tablet 2 10" version with Windows 8.1
Shows volume rockers and thumb on/off button
first step keep in mind that your batteryis near fully charged, otherwise plug-in
save your personal data on a cloud or microsdhc card. ..thats for save...
Ok...lets go.... push the volume rocker up hold them and press the round button on three seconds.
the yoga tab 2 will start up and show the lenovo logo...
a few seconds later this should be shown ...
novo menu
Normal Startup
BIOS Setup
Boot Menu
System Recovery
simply touch System Recovery
that will load the recovery envirement after the break ...
a few seconds later the yoga screen turns into blue colour
Choose an option
Continue (Exit and continue to Windows 8.1)
Use a device (Use a USB drive , network connection or Windows recovery DVD)
Troubleshoot (Refresh or reset your PC , or use advanced tools)
Turn off your PC
the right way to go is Troubleshoot ... so give a big five to Troubleshoot... (a soft touch please )
...next screen is Troubleshoot...with these options
Troubleshoot
Refresh your PC
If your PC isnt running well, you can refresh it without loosing your files
Reset your PC
If you want to remove all of your files you can reset your PC completely
Advanced options
touch Reset your PC
will show this on your Yoga tab 2 ....
Here´s what will happen
* All your personal files and applications will be removed
* Your PC settings will be restored to their defaults
touch Next , after another start or cancel option... the recovery envirement need around an hour to recover ...
tip toe tip toe ... walking around the block with your pet ... talk with your neighbour ... or something else ..
Bing, Bong : time is up and your yoga is complete factory restored , so you can startin your yoga tab 2 from a scratch that welcomes you with windows welcome screen, touch it to set up your personal data and so on..
Thinkies 2x X200s/X301 8GB 256GB SSD @ Win 7 64
Ideas Centre A520 ,Yoga 2 256GB SSD,Yoga 2 tablet @ Win 8.1Excellent tip, K!
Community Advocate Program Manager
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество
Maybe you are looking for
-
Bad Performance with Oracle Lite 4.0.1
I have a table in Oracle Lite with 17000 records and 110 fields. A SELECT on this table needs 1 minute to finish. The same table and query only needs 1 second on Oracle 8i Server. MSDE also needs 1 second. All the relevant fields are indexed. Are the
-
Hi there! I have eternal problem with N73-even when I set a volume level to 100% sound is pretty quiet, and I can't hear it on a busy street....Thought a friend of mine has 6233 and the nokia has very loud plaer'r sound...more than enough. As far as
-
How to start oracle Jdeveloper 11g Weblogic Admin Server
Hi Every one Can any one help me in starting the Oracle Jdeveloper 11g weblogic admin server. There is option to start the admin server while configuring the new domain, but after that if we need to start the same domain I didn't find any option in 1
-
Copy/paste photo's to docs in Adobe ios
Can a person not copy/paste a photo to a doc?
-
Access All User along with their password
how to Retrive all the database users and their passwords when connected with sys any query or script