How to Recover RPD in 10g Urgent

Hi Gurus,
I was using my OBIEE 10g RPD and i created some columns and i click on Check Global consistence it work does not have any errors. Then when i click on Save button the RPD is not responding. I dont have any backup of the Code and today is the release. I am not sure how to recover it. Please help me its urgent.
Thanks a Lot
Regards
@li

Hi,
First of all you must Open a ticket with oracle Support and explore the options
You can use this note to fix it:
RECOVERING FROM A LOST DATAFILE IN A UNDO TABLESPACE [ID 1013221.6]
If you is Unable to Drop Undo tablespace Since Undo Segment is in Needs Recovery
You can Upload the following trace file while opening the ticket
SQL>Alter session set tracefile_identifier='corrupt';
SQL>Alter system dump undo header "<new of undo segment in recover status>";
Go to udump
ls -lrt *corrupt*
Upload this trace file
Also upload the alert log fileRegards,
Levi Pereira
Edited by: Levi Pereira on Nov 29, 2011 1:58 PM

Similar Messages

Can you tell me how to recover iphone contacts

Recently in trouble, I lost contact because of my Prison break failed,Can you tell me how to recover iphone contacts?urgent!urgent!urgent!thanks!!!

"jimistyle", a little bit late reply but hope you can still hear. ^^
The fact is there might be another way to recover your lost iPhone files via iTunes on your Mac machine. This Mac utility is able to extract & restore iTunes backup files for your lost iPhone data. Not too many Mac users know that each time you sync data between your iDevice (iPhone, iPod, iPad) and iTunes, all previous records will be backed up by iTunes automatically and saved as (.sqlitedb) files. Hope this helps take your stress out. Best regards.
<Link Edited by Host>

How can recover the dropped table on oracle 9i and 10g ?

This is the scnario...
user dropped one table on his schema...
oracle 10g DB
flashback not enabled so no flashback drop possible
but any way to recover it from recyclebin on 10g ? becuase this is not sysdba table ...if yes how about on 9i...if yes then will there be any limit on recycle bin like space pressure ??
Scnario 2:
we have two online redo log group with 2 member each..
my currnet online redolog group currupted (including members)...we need the data's of that currnet group so we should'nt use the clear log command
how to recover it ?
Do we need to go for any block level revcovery ?
thanks
Moorthy
Edited by: user13014926 on Jan 18, 2011 6:55 AM

If you have no backup your only option is to perform incomplete recovery (point-in-time recovery) to the time just before the drop, export the table and then restore the database (for example, from a cold backup taken just before the incomplete recovery,) and import the table. This obviously requires a full backup
taken before the drop which you don't seem to have, so the answer is "regrettably no."
If you have a backup;
Take backup of ur current db, apply previous day backup, do point in time recovery to get table back,export table, shutdown and apply latest backup, import table back
Regards,

How to Downgrade Rpd From 11g to 10g???

Hi all,
I want to know how to downgrade rpd from obiee 11.1.1.5 to obiee 10.1.3.4.
please share the valuable links.
Thanks.

First, you will have to completely uninstall 11g, see steps below:
http://obiee911.blogspot.com/2013/01/uninstalling-obiee-11g-instance-on.html
This should be followed by installing 10g, and then applying 10g patches to reach 10.1.3.4.1 version. I hope you have all the right 10g installation files available. Im not sure if you can download them from Oracle anymore, please check before proceeding.

How to recover the data from a dropped table in production/archive mode

How to recover the data/change on a table that was dropped by accident.
The database is on archive mode.

Oracle Version. ? If 10g.
Try this Way
SQL> create table taj as select * from all_objects where rownum <= 100;
Table created.
SQL> drop table taj ;
Table dropped.
SQL> show recyclebin
ORIGINAL NAME    RECYCLEBIN NAME                OBJECT TYPE DROP TIME
TAJ              BIN$b3MmS7kYS9ClMvKm0bu8Vw==$0 TABLE        2006-09-10:16:02:58
SQL> flashback table taj to before drop;
Flashback complete.
SQL> show recyclebin;
SQL> desc taj;
Name                                      Null?    Type
OWNER                                              VARCHAR2(30)
OBJECT_NAME                                        VARCHAR2(30)
SUBOBJECT_NAME                                     VARCHAR2(30)
OBJECT_ID                                          NUMBER
DATA_OBJECT_ID                                     NUMBER
OBJECT_TYPE                                        VARCHAR2(19)
CREATED                                            DATE
LAST_DDL_TIME                                      DATE
TIMESTAMP                                          VARCHAR2(19)
STATUS                                             VARCHAR2(7)
TEMPORARY                                          VARCHAR2(1)
GENERATED                                          VARCHAR2(1)
SECONDARY                                          VARCHAR2(1)
SQL>M.S.Taj

3 Files are in recovery modes & we are not having any backup, how to recove

3 Files are in recovery modes & we are not having any backup, how to recover.
select from v$recover_file;
FILE# ONLINE ONLINE_ ERROR CHANGE# TIME
137 ONLINE ONLINE 1.7142E+10 05-MAR-11
138 ONLINE ONLINE 1.7142E+10 05-MAR-11
139 ONLINE ONLINE 1.7142E+10 05-MAR-11
These 3 files are part of tablespace, whcih is having total 26 files
SQL> select FILE#,TS#,name from v$datafile where TS#=12;
FILE# TS# NAME
137 12 /dbo/data/IBPROD/IBPROD_TDB_IDX_00.dbf
138 12 /dbo/data/IBPROD/IBPROD_TDB_IDX_01.dbf
139 12 /dbo/data/IBPROD/IBPROD_TDB_IDX_02.dbf
140 12 /dbo/data/IBPROD/IBPROD_TDB_IDX_03.dbf
141 12 /dbo/data/IBPROD/IBPROD_TDB_IDX_04.dbf
142 12 /dbo/data/IBPROD/IBPROD_TDB_IDX_05.dbf
177 12 /dbo/data/IBPROD/IBPROD_TDB_IDX_06.dbf
178 12 /dbo/data/IBPROD/IBPROD_TDB_IDX_07.dbf
179 12 /dbo/data/IBPROD/IBPROD_TDB_IDX_08.dbf
180 12 /dbo/data/IBPROD/IBPROD_TDB_IDX_09.dbf
181 12 /dbo/data/IBPROD/IBPROD_TDB_IDX_10.dbf
182 12 /dbo/data/IBPROD/IBPROD_TDB_IDX_11.dbf
183 12 /dbo/data/IBPROD/IBPROD_TDB_IDX_12.dbf
184 12 /dbo/data/IBPROD/IBPROD_TDB_IDX_13.dbf
185 12 /dbo/data/IBPROD/IBPROD_TDB_IDX_14.dbf
186 12 /dbo/data/IBPROD/IBPROD_TDB_IDX_15.dbf
187 12 /dbo/data/IBPROD/IBPROD_TDB_IDX_16.dbf
188 12 /dbo/data/IBPROD/IBPROD_TDB_IDX_17.dbf
189 12 /dbo/data/IBPROD/IBPROD_TDB_IDX_18.dbf
190 12 /dbo/data/IBPROD/IBPROD_TDB_IDX_19.dbf
192 12 /dbo/data/IBPROD/IBPROD_TDB_IDX_20.dbf
195 12 /dbo/data/IBPROD/IBPROD_TDB_IDX_21.dbf
196 12 /dbo/data/IBPROD/IBPROD_TDB_IDX_22.dbf
200 12 /dbo/data/IBPROD/IBPROD_TDB_IDX_23.dbf
257 12 /dbo/data/IBPROD/IBPROD_TDB_IDX_24.dbf
258 12 /dbo/data/IBPROD/IBPROD_TDB_IDX_25.dbf
260 12 /dbo/data/IBPROD/IBPROD_TDB_IDX_26.dbf
Pls treat it urgent.

Pls treat it urgent. If it's urgent , open a priority 1 service request on My Oracle Support/metalink.
If it's not so urgent, set the datafiles to OFFLINE, so you can open the database.
Without backup you only can recover if you have ALL archivelogs since creation of the files. Normally that's rarely the case.
Werner

How to recover to keep tablespaces working after datafile deleted on OS

hi,
given situation like this :
1. OS HPUX 11i
2. Oracle 9.2 or 10g
3. tablespace AAA have a datafile AAA.dbf
4. AAA.dbf has been deleted by a guy on OS by accident
5. it's a production database , i have other copy of product running elsewhere
6. we can forget about the data on this tablespace , just wanna make sure new data will still be inserted
I know there is a magic way involving file descritpor to recovery the file on OS if it was still opened by the process
seems it only works on linux or solaris , since HPUX don't have /proc
here is what i had done ,
1. offline drop the tablespace
2. export tablespace AAA from other DB without data but everything else
3. import them into DB without AAA now
only problem seems application couldn't insert into the tables ,Object priveledge not granted
i'd checked the export file , those object grant SQL are right there , i just don't know why import hasn't worked
so my question is
if it were you ,
1.do you have any better idea of how to recover
2.if you any dirty and fast way of recovery File on HP box , appreciate that too
3.can you image why import doesn't seems getting priveledge imported ? my DB version 9.2.0.4
many thanks
br/ricky

thanks , aman ,lenord and you all
looks like i'm the sinful :)
to clear it up ... it's not me who did it , one of our guys , same thing ,hum ~~
he deleted the backup , cause it's full and auto backup is not ongoing , and he's trying to make things right
he deleted the datafile , cause i told him to rename the file to another space , coz vgdb is full , screw up that too ..
yeah , it'a real production database ~~ , so ,if anybody learn somethings on this , credit on me , :)
the version is 9.2.0.4 , but gonna move to 10g soonor or later , so put it there , to see if in 10g , we can do better ..
tablespace created like five years ago , so , apply all archive since would be crazy ~
this database have 500 Tablespaces , and thoudsands of tables , and the one lost is a important one ,
but data in it , we can bear loss
what i do , is offline drop the tablespace , and import the tablespace without data from other production DB ...
only it didn't work out so well with object grant , and application still not inserting ...
why i post it here , is i wanna learn better ways in this kind of situations ...
i thought my way is not good enough
anway , i'll look at all your suggestions
thanks
br/ricky
Edited by: zs_hzh on Sep 15, 2008 10:12 PM

How to recover root password in S10 for Intel

Please is Urgent!
how to recover root password in S10 for Intel
Thanks.

Boot into single-user mode from CD 1.
Mount your root partition (eg, c0t0d0s0)
to /a, then edit /a/etc/shadow to take away
the root password.
Reboot normally, login as root, reset the
root password.

How i recover my database

Dear All
My database crash but luckly i have logical and phsical backup of my data base and i try my level best but i did not get good result, so plz let me know, how i recover my database(Oracle 10g, OS:window xp), means even i attach my tablespaces also
thsnks in advance
Regards,

10g means what? Please provide a full and complete version number.
What do you mean by logical and physical backup ... be very specific and clear. For example don't say "export" indicate whether it was made with exp or datapump and how you were logged on and the parameters used when it was created.
What do you mean by "crash." Again be very specific and clear.
We can do more harm by guessing your situation whereas we can help if we know what actually happened.

How can i get oracle 10g and Xquery

sir,
How can i download Oracle 10g and Xquery.I need it urgently for my project work...
thanks..
somesh

The following link provides a good starting point for your endeavour:
http://www.oracle.com/technology/sample_code/products/forms/index.html

How 2 call a report 10g from a parameter form 10G

Hello,
pls. i need steps ,or docs how 2 run a report 10g from a parameter form ;
Is it requireD for the Parameter form to call a report an Application Server no* ???*
i had a previous experience with the code due to run the report as follows:_
DECLARE
   PARAM_ID                                 PARAMLIST ;
   PARAM_NAME                           VARCHAR2(30) := 'REPORT_PARAMETER';
   ALRT                                         NUMBER;
   ERR_TXT                                   VARCHAR2(1000);
   repid                                         REPORT_OBJECT;
   v_rep                                        VARCHAR2(100);
   v_REP_SERVER_NAME       VARCHAR2(200);
   v_ip                                          VARCHAR2(100);
BEGIN
       PARAM_ID := GET_PARAMETER_LIST(PARAM_NAME);
       IF NOT ID_NULL(PARAM_ID) THEN
          DESTROY_PARAMETER_LIST('REPORT_PARAMETER');
       END IF;
       v_REP_SERVER_NAME := REP_SERVER_NAME;
BEGIN
        SELECT PARAMETER_VALUE
        INTO   v_ip
        FROM GENERAL_FIXED_PARAMETERS
       WHERE PARAMETER_ID = 'REPORT_SERVER_IP';
       EXCEPTION
       WHEN OTHERS THEN
       Message ('OTHERS' || SQLCODE || ' And ' || SQLERRM);
       Message ('OTHERS' || SQLCODE || ' And ' || SQLERRM);
END;
       PARAM_ID := CREATE_PARAMETER_LIST(PARAM_NAME);
       ADD_PARAMETER(PARAM_ID,'PARAMFORM',TEXT_PARAMETER,'NO');
       ADD_PARAMETER(PARAM_ID,'COPIES',TEXT_PARAMETER,:COPIES);
       ADD_PARAMETER(PARAM_ID,'P_DISPLAY',TEXT_PARAMETER,:DESTYPE);
       ADD_PARAMETER(PARAM_ID,'DESFORMAT',TEXT_PARAMETER,'pdf');
       ADD_PARAMETER(PARAM_ID,'group_id',TEXT_PARAMETER, :group_id);
         repid := find_report_object('WH_R01_GRP_ITEM');
         SET_REPORT_OBJECT_PROPERTY(repid,REPORT_SERVER,v_rep_server_name);
         v_rep := RUN_REPORT_OBJECT(repid,PARAM_ID);
WEB.SHOW_DOCUMENT('http://'||V_IP||'/reports/rwservlet/getjobid'||substr(v_rep,instr(v_rep,'_',-1)+1)||'?server='||v_REP_SERVER_NAME,'_blank');
-- http://server_name:8889/reports/rwservlet?report=rep_name.rdf&paramform=yes&destype=CACHE&desformat=htmlcss&userid=id/pass@conn
END;notice here the value of V_IP it is retrieved from the following table desc...
The table desc   GENERAL_FIXED_PARAMETERS that i select from the values are as follows:_
SQL>   DESC GENERAL_FIXED_PARAMETERS;
Name                                      Null?    Type
PARAMETER_ID                                       VARCHAR2(200)
PARAMETER_VALUE                                    VARCHAR2(200)
PARAMETER_DESC                                     VARCHAR2(200)
MODULE                                             VARCHAR2(200)it's stored value is as follows:
SQL> select * from GENERAL_FIXED_PARAMETERS;
PARAMETER_ID   PARAMETER_VALUE PARAMETER_DESC   MODULE
REPORT_SERVER_IP     rep_oraas_OracleAs_10gNotice here the value of the PARAMETER_VALUE is a string ; as if it's a generic value to be applied on any REPORT_SERVER_IP this value ...
Where Should i retrieved or Get ???
That was long time i can't remember pls help me 2 run my report what should id
i searched the google but there is a missing link can u help and guide me it's urgent pls.
if needed 2 start oc4j for reports , setting pathes ,fonts, enviroment file etc.
The report object's property in the object navigator is as follow:_
+ Oracle Developer Integration node :
File name : My_Report_name
Execution Mode: Runtime
Communication Mode : Synchronous
Data Source data block :NULL
+ Reports node:
Report Destination Type : FileThanks in advance,
Regards,
Abdetu...

Thanks InoL for reply,
REPORT_SERVER_IP is not correcti had doubted but wasn't sure of it...!
My First Question was :
Is it requireD for the Parameter form to call a report an Application Server no ???*the answer i found is Yessss
Regards,
Abdetu...

How to recover after ORA-12705 ?

Hi folks,
Environment:
WinXP, .NET 2.x, ClickOnce
Oracle 10g DB Server
ODP.NET 11g with POOLING enabled!
On some user machines we encounter ORA-12705. Indeed we have proved that it is caused by the presense of the following registry key: [HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE]"NLS_LANG"="NA"
We have the means to remove (or assign a different value to) that key in our code which fixes the problem. However, we have a couple of questions:
1) Is it safe to just remove the registry entry before we establish a DbConnection for the first time? How likely is that to break existing Oracle applications?
2) If we decide to deal with this exception only when we encounter it, how do we recover from it? We use a connection pool, and we discovered that after this exception is encountered and the registry entry removed, we could CREATE a connection (presumably taken from the pool), but when we try to OPEN it, we get the same exception. Again, how do we recover from this providing we are using connection POOLING with ODP.NET 11g?
Thank you so much in advance!
Regards,
gkk1969

Yes I did reset the switch after the write erase. I do not think it reverted back to factory defaults though. I still get a login response when I telnet to the configured IP address, but no passwords seem to work. I have tried admin/admin as per the documentation defaults and the configured password, both reply with login incorrect. I have also tried no password.
I am using the supplied Cisco serial cable which I know works because I was connected serially when I sent the write erase command.
Since the command and system reset I have not seen any activity through the serial connection. I have tried both the top and bottom supervisor and neither show any activity when the switch boots up. I am using a windows laptop using hyperterm with 8/1/N settings as per the documentation.
Is there any other way to set factory defaults? I am out of ideas on how to recover this switch.

How to recover Deleted file from HARD DISK

By mistake my entire AVCHD file of 90 Mts duration was deleted from my Hard Disk, this I realised after a week., in the meantime I have not added or deleted any file from this hard Disk. I had given my this hard disk to my service engineer to recover the video., he has tried and recover some 40 mb file., but I cant open this recovered video file in Premiere or any other video convertor programme., also I cant get any information about Video.
Can anybody in the forum help me and suggest how to recover my deleted Video from the Hard disk

Hi, hard disk data loss is actually a hard task for many users 'cause most of them think this kind of problems is a complicated situation. Here are some tips you need to know after data loss happened.
1. If you meet the file loss situation, keep calm and stop using your computer to do any read or write operation until you find the way to recover the lost files because any wrong operation.
2. If you've lost a file, time is of the essence. As new files saved to Mac hard drive or storage devices, the original files gets overwritten. So do not use the drive or disk which your deleted files are stored before at all, until you have completed the scanning and recovery process.
3. The system crashed or the files loss situation happens occasionally, so remember build a backup for the files periodically is strongly needed.
4. If you meet the file loss situation again, stop using the Mac or storage device right now, use another computer to process the files recovery.
5. Remember this, no matter at the normal time or after files recovery, build a backup for the files periodically is the best method to protect your files from data loss situation.
This post offers you more tips you may need: http://www.uflysoft.com/data-recovery-mac/mac-files-recovery.html

How to recover my macbook pro system password

how to recover my macbook pro system password??

You don't, you set a new one
 Cheat sheet to help diagnose and fix your Mac

How to recover lost folders and files - Pls help, help...

Some days ago I lost all of my 15 GB folders and files that stored in my Macbook Pro hard drive called DATA. I brought my Macbook pro to an experienced computer tecnicians who providing data recovery services. To his and my suprise, after checking, scanning it a few hours, he said their is no way to recover because he did not find any trails at all. The computer still seems working properly - I have no problem with any applications. There are few other folders in the DATA hard disk containing pictures, computer programs still remain. These lost folders and files contain mainly documents (word, excel, power point, pdf etc) which I accumulated in my many years working !!!!. I did not make a back up since last September partly because I think Mac is very safe.
The computer with me all the time on that day and only my son used Power Point to make a simple presentation on that evening - he can not save it on the folders the he normally use - All the folders and files are gone.
I will appreciate it very much if any of you can tell me what would be the possible causes and more importanly how to recover the lost folders and files. They are very very valuable to me.
Many thanks for your kind attention
Loimekong from Vietnam
Macbook Pro 2.4 Ghz
Intel Core 2 Duo
4 GB 1067 MhZ DDR3

First, did the data actually get deleted, or is it still there somewhere? Try searching the drive for some of the documents, perhaps it's all just in another folder on that drive.
If it's truly gone, it's impossible for us to say what might have happened to make it unrecoverable. Perhaps someone using the computer used Secure Empty Trash, or securely erased empty space on the hard drive. Perhaps it was overwritten by other stuff before you noticed. It's possible the hard drive is starting to fail, though this seems like an awfully specific problem for that to be the issue.
Or perhaps the tech you took the computer to didn't know what he was doing. Why not try recovering what you can on your own? See Recovering deleted files.
You should be aware that no computer is safe. All computers rely on hardware that may fail and software that can have bugs. You absolutely MUST maintain a good set of frequently-updated backups... no fewer than two full backups of anything you don't want to lose.
(Note that my pages contain links to other pages that promote my services, and this should not be taken as an endorsement of my services by Apple.)

How to Recover RPD in 10g Urgent

Similar Messages

Maybe you are looking for