How to Recover SD Data with SD Data Recovery Software?

There are various kinds of SD card recovery program in the market ,data recovery software is your top choice when you encounter SD card malfunction. This excellent SD card recovery tool is focus on recover lost files beautifully including data lost from formatted or damaged SD card which could not be accessed normally, virus attack, software crash, hard disk not formatted error, etc ,it also offers various service like hard drive partition file recovery, external hard drive file recovery , memory card file recovery, USB drive file recovery, etc.
We use SD card frequently by using card reader to achieve important files stored in it. as it is small in size ,so it is portable and very convenient. Meanwhile, SD card is also very fragile and easy to be corrupted. There are two main reasons for SD card data loss. One is hardware corruption which is unable to be recovered unless we send the SD card the professional data recovery service center , the other is software corruption like accidentally deletion of files and virus infection ,which would be recovered data recovery software .H-Data Recovery Master is great to recover android lost formatted data with easy.

You need either an iTunes backup on your computer or an iCloud backup to restore your app data. Other data may be recoverable:
If you had enabled iCloud sync you can recover contacts, calendar events, notes and email by syncing your new device to iCloud. You can also view it by logging in to https://icloud.com
If you had enabled Photo Stream or Photo Sharing you can recover photos from it.
You can sync your music from iTunes on your computer, or, if it was purchased from iTunes, you can download it again.

Similar Messages

Hello, I recently bought a new Laptop and wanted to sync all my data from the old one. Accidentaly I merged my Sync Data with Device data, how can i recover it?

hello, i recently merged my Sync data with New device Data , because the option MERGE THIS DEVIC's DATA WITH SYNC DATA was checked, how can i recover my stuff back ? from a previous state

Sorry, SYNC don't have that option right now

How to compare current date with past date

Sample code for comparing current date with past date
i dont want to Calender.set method to compare it.
How can i do it?

PLEASE stay with ONE thread:
http://forum.java.sun.com/thread.jspa?threadID=5143991&tstart=0

How to put a check with the date

Hi,
I have created a ztable with 3 fields .
clientcode(3),
date,--date geneated
version--- fileversion
i need to update this table everytime i execute the data. Every time version shd get incremented when i execute the program. When i excute the program next day version shd be updated by '1'.
i wrote the code for version updated i'm not getting the logic how to put a check with the date.
SELECT *
   FROM zfi_enetflver
   INTO TABLE gt_flver.
SORT gt_flver DESCENDING.
CLEAR: gv_dt, v_file.
CONCATENATE sy-datum6(2) sy-datum4(2) INTO gv_dt.
READ TABLE gt_flver WITH KEY client_code = gv_clcd.
IF sy-subrc = 0.
    idx = sy-tabix.
    IF gt_flver-zdate = ' '.
      gt_flver-zdate = sy-datum.
    ENDIF.
    IF gt_flver-version = ' '.
      gt_flver-version = '001'.
      gv_filever = gt_flver-version.
      MODIFY gt_flver INDEX idx TRANSPORTING zdate version.
      MODIFY zfi_enetflver FROM TABLE gt_flver. "TRANSPORTING version.
      CONCATENATE 'E:\' 'ENET\' gv_clcd gv_dt '.' gt_flver-version INTO v_file.
    ELSE.
      gt_flver-version = gt_flver-version + 1.
      gv_filever = gt_flver-version.
      MODIFY gt_flver INDEX idx TRANSPORTING version.
      MODIFY zfi_enetflver FROM TABLE gt_flver .
      CONCATENATE 'E:\' 'ENET\' gv_clcd gv_dt '.' gt_flver-version INTO v_file.
    ENDIF.
ENDIF.
clientcode is the key field in ztable do i need to make date field key ??
please help me with the logic

You need to implement below logic:
1. check if field_date = sy-datum. in this case do nothing.
2. else . move sy-datum to field_date .
3. modify your internal table with field_date .
4. populate final table to database table .
hope you get it.

Why does my phone use data with cellular data turned off?

I have problems with my iPhone 5 using data on its own. It usually happens at night, with all the apps closed and plugged in to charge (should be connected to my wifi). Recently, I started turning off my cellular data any time I'm at home out of desperation to save my data. Last night, my phone used 6MB of data with my data off, plugged in. I use My Data Manager to track, it matches up with AT&T's record of my data usage, so I'm pretty sure the app is not wrong. I have the 200MB plan, so I have to be very careful and it's incredibly frustrating to wake up and find 6MB gone when cellular data was turned off. Does anyone know what's going on? I haven't bothered calling Apple or AT&T, I never get anywhere with either one.

I'm not familiar with My Data Manager but from the name I would think it would tell you what app or apps have used the data and that might help narrow down the problem. If it doesn't have that information, you can go to Settings > Cellular > Use Cellular Data For and that shows usage by each app and if you click on System Services in that list it will also give details of that usage. The numbers are since you last reset the statistics (bottom of that screen). With a little time and detective work you may be able to identify the cause.
Also, there have been many discussions on various internet forums of AT&T (and other) reporting of the time of data usage not matching the actual time of the use. The usage numbers over a number of days for example are accurate but usage reported at 2AM may actually be a summary of some types of use that happened the previous day.

Billing user exit to overwrite the service rendered date with billing date

Hello,
My client would like to determin the rebate conditions based on billing date. However, the system only uses the service rendered date for rebate determination.
Therefore, I am trying to overwrite the service rendered date with billing date at the time of billing creation.
Could you please let me know what user exit I can use?
I can't user the user exit RV60AFZC because the billing date is not determined when this user exit is running.
Your help would be appreicated! I will give you good points! Thanks

Hi Londa,
Try using one of the following includes for your requirement.
(a.) rv60afzz
(b.) rv60afza
(c.) rv60afzb
(d.) rv60afzd
(e.) BAdi SD_CIN_LV60AU02
or if you are working with ECC 6.0 use the Enancement Spot ES_SAPLV60A available from SE80 by giving package VF and then selecting Enhancements and then expanding Enhancement Spots
Hope these are helpful to you. Reward accordingly.
Thanks and Regards,
Maddineni Bharath.

Generic Extractor: enriching GL Data with Purchasing Data

Experts,
This is my first time with Generic Extractor.
Requirement:
We have a requirement to enrich GL data with Purchasing data via the Material Document Number.
I need to provide this upto to the datawarehouse layer wherein another team will take over.
Solution idea:
Material Document is not part of the datasource 2LIS_02_SCL.
a. Should I enhance this datasource to include material number OR
b. Develop a concept to create a generic delat enabled extractor that pulls data from EKBE, GR and IR information.
In EKBE multiple material documents can exist per PO. The extractor returns 2 record per PO (before and after image) with the updated information.So if we have the first GR with Material document 901 and then a second GR with material doc 902 the extractor loads 3 records. New record, Before image and after image and the only one stored in BI is the after image. material doc would have value 902 if enhanced.
For the generic extractor approach the the ability to load deltas is crucial, since the EKBE table is very big. Maybe
"CPUDT-Day On Which Accounting Document Was Entered" and "CPUTM-Time of Entry" can be leveraged as delta hook.
Any ideas???
Thanks,
Jain

No one answered

HOW TO RECOVER info SAFETY, IF REGISTERED MAIL RECOVERY, MASTERING WAS Dismissed

HOW TO RECOVER INFO SAFETY, IF REGISTERED MAIL RECOVERY, MASTERING WAS DISMISSED

I'm sorry, but not only is it not clear what exactly you are talking about, but you've posted in the forum for making podcasts which has nothing to do with your question.
These forums are user-to-user - ye ou are not talking to Apple here, so no-one here can give you specific information about any order you may have placed.
If you have a more general query please select the appropriate forum from the list here:
https://discussions.apple.com/index.jspa
and post your question with as much detail as possible (but do not post personal information such as your address, email address, or serial numbers of equipment).

How to recover in the Scrip the data associated with %TOSELECTION%

In the ADVANCE of the logic package I have written the following PROMPT:
PROMPT(COPYMOVEINPUT,%SELECTION%,%TOSELECTION%,"Select the members to COPY and where to","%CATEGORY_DIM%,%TIME_DIM%")
What I would like to know is how to recover the data associated with %TOSELECTION% in the Script.
The script code is the following:
*XDIM_MEMBERSET FLOW=F99P
*XDIM_MEMBERSET GROUPS=NON_GROUP
*XDIM_MEMBERSET RPTCURRENCY=LC, EUR
*XDIM_MEMBERSET C_DATASRC=INPUT
*WHEN C_ACCT.ACCTYPE
*IS INC,LEQ
*REC(FACTOR=-1,C_CATEGORY=????,TIME=????)
*IS AST
*REC(FACTOR=1,C_CATEGORY=????,TIME=????)
*ENDWHEN
*COMMIT
I must copy both category and time, with the selection of values brought by %TOSELECTION%, but I´m not sure how to recover this data.
I've read other post
the problem there is similar but no solution is provided
Could you help me??
Thanks in advance.
Almudena

hello
have a look here, I think it could help you
In what variables are stored COPYMOVEINPUT prompt members ?

How to create a report with survey data

Hi All,
I need to create a report with survey data in below format. Can anyone help me how to display the summary in this format.
Swapna

Hi Swapna,
According to your description, you want to create a report with survey data and display the summary.
Reporting Services is used for rendering the report with data retrieved from datasource. In Reporting Services, we can retrieve data from the datasource then design a report, after the report processed, data is fixed on the report. So it’s not supported
to have the end users selection and do summary. For your requirement, it’s can’t be achieved currently.
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support

How to fill internal table with no data in debugging mode

Hi all,
I modified one existing program.Now I want to test it.I am not given test data.So in the middle of my debugging, I found that one internal table with no data.My problem is how to fill that internal table with few records in that debugging mode just as we change contents in debugging mode.If I want to proceed further means that internal table must have some records.
Please I dont know how to create test data so I am trying to create values temporarily in debugging mode only.
Thanks,
Balaji

Hi,
In the debugging do the following..
Click the Table button..
Double click on the internal table name..
Then in the bottom of the screen you will get the buttons like CHANGE, INSERT, APPEND, DELETE..
Use the APPEND button to insert records to the internal table..
Thanks,
Naren

How to select header group with detailed data in one SQL

Dear,
I would like to have a little help from you. My goal is to create a view where data must be in appropriate format. In this format i would like to have for each group one header.
I have 3 tables which they ar connected to each other (representing hierachical data where financial plan breaks across different groups).
CRM_PLAN
CRM_PLAN_ID
DATE
AMOUNT
CRM_PLAN_PE
CRM_PLAN_PE_ID
TITLE
AMOUNT
CRM_PLAN_ID (ref key to CRM_PLAN.CRM_PLAN_ID)
CRM_PLAN_MONTH
CRM_PLAN_MONTH_ID
YEAR
MONTH
AMOUNT
CRM_PLAN_PE_ID (foreign key to CRM_PLAN_PE.CRM_PLAN_PE_ID)
Data looks like:
CRM_PLAN
CRM_PLAN_ID | DATE | AMOUNT
1 | 01.01.2012 | 500
2 | 01.02.2012 | 200
CRM_PLAN_PE
CRM_PLAN_PE_ID |TITLE | AMOUNT | CRM_PLAN_ID
1 | Organization 1 |100 | 1
2 | Organization 2 |400 | 1
3 | Organization 3 |200 | 2
CRM_PLAN_MONTH
CRM_PLAN_MONTH_ID | YEAR | MONTH | AMOUNT | CRM_PLAN_PE_ID
1 | 2012| 1 | 60 |1
2 | 2012| 2 | 40 |1
3 | 2012| 1 | 350 |2
4 | 2012| 2 | 50 |2
5 | 2012| 1 | 200 |3
I would like view which would return data like:
MONTH | AMOUNT
Organization 1 |null
1 | 60
2 | 40
Organization 2 | null
1 | 350
2 | 50
Organization 3 | null
1 | 200
The main question is hot to write an sql as source for view to insert before each group a row with title column value from table CRM_PLAN_PE. Is that even possible? Maybe you could suggest me some other method.
View will be used in oracle form where will be possible to edit data - I will arrange that through insted of trigger.
Regards,
Igor
Edited by: user5528050 on 29.11.2012 2:23
Edited by: user5528050 on 29.11.2012 2:24
Edited by: user5528050 on 29.11.2012 2:25

Hi, Igor,
user5528050 wrote:
... I would like view which would return data like:
MONTH | AMOUNT
Organization 1 |null
1 | 60
2 | 40
Organization 2 | null
1 | 350
2 | 50
Organization 3 | null
1 | 200
The main question is hot to write an sql as source for view to insert before each group a row with title column value from table CRM_PLAN_PE. Is that even possible? Maybe you could suggest me some other method. So, you want to have 2 different kinds of rows in the output:
(1) "parent" or "master" rows containing data from crm_plan_pe, such as
MONTH          AMOUNT
==============     ======
Organization 1(2) "child" or "detail" rows containing data from crm_plan_month, such as
MONTH          AMOUNT
==============     ======
1          60Sure, you can do that.
One way is to do a UNION of 2 separate queries: (1) to generate just the parent rows, (2) to generate just the child rows.
You could also join the 2 tables and use GROUP BY GROUPING SETS. The super-aggregate rows would be the parent rows.
I hope this answers your question.
If not, post a little sample data (CREATE TABLE and INSERT statements, relevant columns only) for all tables involved (it looks like crm_plan is not involved in this problem), and also post the results you want from that data. You need to post this whether or not you want SQL code in reply. The people who want to help you want to provide good answers, and that means they want to re-create the probelm and try their ideas.
Explain, using specific examples, how you get those results from that data.
Always say which version of Oracle you're using (e.g., 11.2.0.2.0).
See the forum FAQ {message:id=9360002}

How to create a group with multiple data fields

Post Author: RichS
CA Forum: Formula
Using CR XI. Using CSV input from ODBC text driver. No problems here.
There are 3 fields that I want the same group by action. Is this possible?)
If any one of these 3 fields change I want some header information and column fieldnames to display. The header information I only want displayed on the first page (on the change) and the column fieldnames to display on every page. I have played around with things like "InRepeatedGroupHeader" and "report group header on each page". I am not getting all the results that I am looking for though.
I want report to look like:
Page header stuff (to display on every page) This data consists of some fields that will have static data and will display on every page. And it consists of 3 non-static fields that I want to group on.
Group header stuff that I only want displayed on the first page on a change from one of the 3 fields mentioned above.
Column headings that I want displayed on every page.
Details data
Group footer stuff (details not important for this)
I get the expected output (column headings displayed on every page, and group header stuff display on the first page on each group change) with one group field. But I want the group change to happen for all 3 fields.
It seems simple but I can't find a way to create a "group" so if "field1 or field2 or field3" change, I get the same "group by" action. I just need to know how to get the expected action.
I expect that I might have some terms mixed up and/or some important information that would aide you in helping me. If that is the case please re-post and I will add any missing or mis-stated information.
Thanks,

Post Author: V361
CA Forum: Formula
I am slightly confused, but perhaps you can create a formula
Then group on the formula. If this is not what you want, could you post some sample data, with the desired results.

How to compare user entered date with current date

Hi all
my requirement is, user allowed select one date, in code i have compare this date with current day date. it should be 15days gap other wise display error message.
I am worried about how to get current date in code. Is there any code to get current date. please reply me with code or mail me at [email protected]
Thanx
keerthi

Keerthi,
Use the method <b>getDifference()</b> of the DateHelper.java available here.<a href="http://www.koders.com/java/fid14A61FEB1B45A64E42E1DCAD7070B46AE46340BA.aspx">DateHelper</a>
1. Create a new folder, say Util under your src folder. (com.xyz.util)
2. Put this DateHelper.java file in that folder,(com.xyz.util) .
3. Now, write an import statement for this java class in the required view.
4. Use the getDifference() method of this class to the difference in days between two days.
Or
Simply use this code.
// Get msec from each, and subtract.
long diff = currDate.getTime() - selectedDate.getTime();
int noOfDays = diff / (1000 * 60 * 60 * 24);
where currDate is today's Date and selectedDate is the Date selected by the User.
Bala

How to build a array with collected data

Hi,
I have collected data from serial port with VISA. Now I want to build a array with 100 date points. Should I connect VISA Read with Build Array directly? How to do it?
PS: All of them are in a While Structure.
Thank you!

An inefficient way to create the array is to use the build array and a shift register as shown below. It's more effecient in terms of memory management to create the array and then use the replace array subset as shown in the other image. Of course, if you don't need the array inside the loop, just wire the value out of the while loop and on the exit tunnel, right click and select 'Enable Indexing'.
Message Edited by Dennis Knutson on 07-03-2007 10:25 PM
Message Edited by Dennis Knutson on 07-03-2007 10:26 PM
Attachments:
Crude Build Array.PNG ‏4 KB
Better Build Array.PNG ‏6 KB

How to Recover SD Data with SD Data Recovery Software?

Similar Messages

Maybe you are looking for