How to recover SMON process

hello,
i am junior DBA ,can u please give info about how to recover SMON process
regards,
lakshmi

SMON, as well as the other background process are required to be up and running. As soon as the process 'dies' Oracle instance will be immediately aborted. There is nothing else to do to try to recover this process. This process should not unexpectedly die, as it would mean you are facing a serious configuration issue or a serious bug problem. And your instance is in an unstable state.
Another reason why this, or any other instance background process could have died is because of an explicit kill command. Nothing to do in this case either.
~ Madrid.

Similar Messages

Recover BPEL Process that crashed with OutOfMemoryError: PermGen space

Hello,
I'm running a Oracle 10G Soa Suite (10.3.5.0) on linux (x64).
Yesterday the oc4j soa instance got out of PermGen memory.
I Restarted the server, but one of the running processes gave a OutOfMemoryError (error attached at end).
I went to Administration tab on BPEL Console and in Recover (Callbacks) i found the instance that gave the error.
I recovered it, but it remain the same.
Can anyone help me on how to recover the process instance, if it is possible to recover it.
Thanks
Pedro
[2010/09/06 17:10:38] There is a system exception while performing the BPEL instance, the reason is "PermGen space". Please check the error log file for more infromation. Please try to use bpel fault handlers to catch the faults in your bpel process. If this is a system exception, please report this to your system administrator. Administrator could perform manual recovery of the instance from last non-idempotent activity or dehydration point. less
<message>
java.lang.OutOfMemoryError: PermGen space
     at java.lang.String.intern(Native Method)
     at oracle.xml.parser.schema.XSDBuilder.parseElement(XSDBuilder.java:1310)
     at oracle.xml.parser.schema.XSDBuilder.parseCompositor(XSDBuilder.java:3040)
     at oracle.xml.parser.schema.XSDBuilder.parseComplexContent(XSDBuilder.java:2342)
     at oracle.xml.parser.schema.XSDBuilder.parseComplexType(XSDBuilder.java:1897)
     at oracle.xml.parser.schema.XSDBuilder.parseElement(XSDBuilder.java:1404)
     at oracle.xml.parser.schema.XSDBuilder.parseTopLevelElems(XSDBuilder.java:1013)
     at oracle.xml.parser.schema.XSDBuilder.buildSchema(XSDBuilder.java:824)
     at oracle.xml.parser.schema.XSDBuilder.parseIncludeAndImport(XSDBuilder.java:1260)
     at oracle.xml.parser.schema.XSDBuilder.parseTopLevelElems(XSDBuilder.java:1033)
     at oracle.xml.parser.schema.XSDBuilder.buildSchema(XSDBuilder.java:824)
     at oracle.xml.parser.schema.XSDBuilder.parseIncludeAndImport(XSDBuilder.java:1260)
     at oracle.xml.parser.schema.XSDBuilder.parseTopLevelElems(XSDBuilder.java:1033)
     at oracle.xml.parser.schema.XSDBuilder.buildSchema(XSDBuilder.java:824)
     at oracle.xml.parser.schema.XSDBuilder.build(XSDBuilder.java:454)
     at oracle.xml.jaxb.JaxbValidator.getNextSchema(JaxbValidator.java:338)
     at oracle.xml.jaxb.JaxbValidator.validate(JaxbValidator.java:185)
     at oracle.bpel.services.common.util.AbstractJaxbUtil.schemaValidate(AbstractJaxbUtil.java:196)
     at oracle.bpel.services.workflow.metadata.impl.TaskMetadataCache.getTaskDefinition(TaskMetadataCache.java:248)
     at oracle.bpel.services.workflow.metadata.impl.TaskMetadataService.getTaskDefinition(TaskMetadataService.java:198)
     at oracle.bpel.services.workflow.task.impl.TaskService.initiateTask(TaskService.java:257)
     at oracle.bpel.services.workflow.task.impl.TaskService.initiateTask(TaskService.java:225)
     at oracle.bpel.services.workflow.task.ejb.TaskServiceBean.initiateTask(TaskServiceBean.java:38)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at com.evermind.server.ejb.interceptor.joinpoint.EJBJoinPointImpl.invoke(EJBJoinPointImpl.java:35)
     at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
     at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
     at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
     at com.evermind.server.ejb.interceptor.system.JAASInterceptor$1.run(JAASInterceptor.java:31)
</message>
Edited by: user4285739 on 7/Set/2010 4:22
Sorry. Wrong forum.

5.4 Resolving Out-of-Memory Errors in the BPEL Runtime Console at http://download.oracle.com/docs/cd/E14101_01/doc.1013/e15355/maint.htm#CHDCAAHE
5.6.6 PermGen Out-of-Memory Error During Deployment at http://download.oracle.com/docs/cd/E14101_01/doc.1013/e15342/bpelrn.htm#BABCEFJG
Regards,
Anuj

How to recover Deleted file from HARD DISK

By mistake my entire AVCHD file of 90 Mts duration was deleted from my Hard Disk, this I realised after a week., in the meantime I have not added or deleted any file from this hard Disk. I had given my this hard disk to my service engineer to recover the video., he has tried and recover some 40 mb file., but I cant open this recovered video file in Premiere or any other video convertor programme., also I cant get any information about Video.
Can anybody in the forum help me and suggest how to recover my deleted Video from the Hard disk

Hi, hard disk data loss is actually a hard task for many users 'cause most of them think this kind of problems is a complicated situation. Here are some tips you need to know after data loss happened.
1. If you meet the file loss situation, keep calm and stop using your computer to do any read or write operation until you find the way to recover the lost files because any wrong operation.
2. If you've lost a file, time is of the essence. As new files saved to Mac hard drive or storage devices, the original files gets overwritten. So do not use the drive or disk which your deleted files are stored before at all, until you have completed the scanning and recovery process.
3. The system crashed or the files loss situation happens occasionally, so remember build a backup for the files periodically is strongly needed.
4. If you meet the file loss situation again, stop using the Mac or storage device right now, use another computer to process the files recovery.
5. Remember this, no matter at the normal time or after files recovery, build a backup for the files periodically is the best method to protect your files from data loss situation.
This post offers you more tips you may need: http://www.uflysoft.com/data-recovery-mac/mac-files-recovery.html

How to recover a TM backup from a NAS drive

I am using a MBPro from 2011. I lost a lot of family pictures due to my iPhoto library loosing the connection to the original hi-res files. At the moment I try to recover those with Data Rescue4 but it looks I lost quite a lot.
Now, I do have the following situation:
Until March 2014 my iPhoto Library resided on my Mac HDD
The HDD broke and had to be exchanged
So I moved the iPhoto Library onto a newly bought 2TB external HDD that I connect via USB (a WD MyPassport Ultra)
Now due to the situation described above, I need to recover the last iPhoto Library that resided on my Mac, but which was never used in iPhoto since the hardware crash
When I open iPhoto and then TimeMachine, it does not offer me to recover pictures from that last backup, which is from March 2014 and is about 135GB large. I assume the reason is that I haven´t used it in iPhoto, so iPhoto can´t know.
The TM backup on my NAS, a 4TB Seagate Central is 1,2 TB large. The seagate central cannot be connected to a Mac via USB or wire. According to it´s description, the only way to get data on and off is via ethernet. Having read that TM does not support backing up from a NAS, I assume I need to copy the 1,2 TB backup TM file onto another external HDD that I can attach via USB. Is this correct ? Does this help ?
And then I would need to recover it - but how given the situation above ??
I am pretty desperate meanwhile as I´ve been working on this for the last four weekends...
Within the process of data recovery I bought iPhoto Library Manager, PhotoSweeper and DataRescue4 in order to help recover the data. But I don´t know if this helps here. I´ve tried everything to recover my old files with those tools already.
I would very much appreciate your advice on how to recover my TM backup.

You can or should be able to recover the iphoto library directly from the NAS.. you do not need to copy it to a disk.
TM cannot create a backup from a network source.. but it is very happy using a network target.
Our friend Pondini wrote extensive notes on recovery of various important files using TM
See Q15 here. http://pondini.org/TM/FAQ.html
There is a link in there to recovery of iphoto in particular under various OS.. but the guy died before Yosemite was inflicted on the Apple Community.
TM has never worked particularly well since Yosemite.. so I can only offer my hope that the method still works..
Here is an example of recovery manually of iphoto library from TM backup I did to show how it is done.
Can't access old files on time capsule
In Yosemite you might be able to simply right click on the file in Finder.. and it bring up an option to recover it from TM.. of course that would assume TM was going to actually work and that is a bridge too far for Yosemite.
In the end.. you can of course do a full recovery to a USB drive plugged into your computer.. I have also used that method to get around issues with finding stuff from old backup.. however IMHO the manual method of digging through the backup offers you the best chance of recovery.
Do protect the TM sparsebundle.. in the end that is the only connection back to you files you have.. so saving a copy of the sparsebundle to a USB drive is not a bad idea.. Certainly do nothing in terms of manipulating the sparsebundle.. you can extract files from it.. copy it to another location.. but make no changes to original sparsebundle on the network drive whatsoever.. so do not continue backups to it or anything like that.
My strong recommendation btw since Yosemite or even Mavericks was to use Carbon Copy Cloner.. and make a bootable backup of your main operating system and any other drives.. You would not be in this mess if you had .. so for future reference.. TM is not really adequate.

How to recover windows from 2nd partition

I have a problem, recovery process crashed almost at the end and when i restart computer i cannot get to the windows (missing files). I installed windows but i didn't have any toshiba utilities for recovery (only those files on 2nd partitions: hdd recovery). And here is my question, how can i recover my system from that files without any toshiba utilities? Can i download them or something? What can i do to restore it, because toshiba recovery media is, i think not available. And if it's not so how can i do? My warranty for laptop expired.
Solved!
Go to Solution.

Satellite A350-110 (PSAL6E-006009G3)
how can i recover my system from that files without any toshiba utilities?
You should order the recovery discs from Toshiba.
Toshiba Europe Backup Media Online Shop
After you have restored the hard disk to its original out-of-the-box contents, you should have the recovery utilities and partitions. See the A350 User's Manual (attached) for how to recover after that.
-Jerry
Attachments:
SA350_EN.pdf ‏5918 KB

How to recover standby by rman

Hello every one
Oracle 11g2 on window server 2008
For testing i have created standby server and shutdow it.
I have also schedule the increamental backup daily in the morning at 5:00 am.
Suppose if primary server has crashed at day time at 11:00 am as whole and standby database has lag of two days with respect to primary server
I have all archive log till 11:00 am, rman backup and control at 5:00 am.
Process that followed to recover the standby server .
1) restore the control file to standby database
2) copy the rman backup to standby server and catalog it.
3) restore the database successfully
4) recover database but it give error
RMAN-03002: failure of recover command at 10/31/2013 14:55:40
ORA-19693: backup piece C:\BACKUP\STD_5TONPQ57_1_1 already included
5) i have issued alter database open but gives following error
ORA-10458: standby database requires recovery
ORA-01152: file 1 was not restored from a sufficiently old backup
ORA-01110: data file 1: 'C:\ORACLE\ORADATA\SLATE\SYSTEM01.DBF'
any help how to recover the standby server by rman incremental backup

yasirdba wrote:
Hello every one
Oracle 11g2 on window server 2008
For testing i have created standby server and shutdow it.
I have also schedule the increamental backup daily in the morning at 5:00 am.
Suppose if primary server has crashed at day time at 11:00 am as whole and standby database has lag of two days with respect to primary server
I have all archive log till 11:00 am, rman backup and control at 5:00 am.
Process that followed to recover the standby server .
1) restore the control file to standby database
2) copy the rman backup to standby server and catalog it.
3) restore the database successfully
4) recover database but it give error
RMAN-03002: failure of recover command at 10/31/2013 14:55:40
ORA-19693: backup piece C:\BACKUP\STD_5TONPQ57_1_1 already included
5) i have issued alter database open but gives following error
ORA-10458: standby database requires recovery
ORA-01152: file 1 was not restored from a sufficiently old backup
ORA-01110: data file 1: 'C:\ORACLE\ORADATA\SLATE\SYSTEM01.DBF'
any help how to recover the standby server by rman incremental backup
Hi Yasir!
If you have all archived log, and control file backups.
Then you must follow this steps
1. Restore Standby control file;
2. Copy archived logs to a folder (/tmp/arch) or FRA
3. RMAN>alter database mount;
RMAN> catalog start with '/tmp/arch'; (or FRA)
RMAN must be cataloged all archived logs;
4. Start redo apply process for apply archived log;
5. If All archived logs applied, then you can perform failover to standby database.
It means Standby database role will change to Primary.
Do you want this?
Regards
Mahir M. Quluzade

My Garageband project crashed, the file lost/damaged! How to recover it?

Guys,
I've been working my garageband project when suddenly the window was closed and the notification asked me to reopen, report or ignore it.
This is my second time my project crashed. The first time, I chose 'reopen', and my file reopen. All the midi datas still there, but the sample sounds were empty. So I had to put it one by one. What a job because I had more than 15 instruments there.
But those jobs was better then what I experienced today. After my project crashed, I chose 'ignore' with assumption I would open the last saved file. But it didn't. I really lost my file. The size for one GarageBand projects is about more than 1 MB. But my file after crashed is about 56 KB! So some solutions like 'right click' and 'show package content' didn't work at all because I worked with midi data, not live recording. I tried to find the script file at projectdata and compared it with my other projects, they have more bytes than my lost project file.
So, if you have a same problem like me, just choose 'reopen'. I hope it will save your midi data so you don't have to work it out from beginning (just like I have to do after write this post ... x) )
So guys, is there any idea how to recover my crashed file? I've sent a report to Apple and still waiting their answer.
Thanks a lot
Andito

Reinstalling iTunes won't ever repair damaged libraries or find lost files.
Unlike nearly all Windows software double-clicking an iTunes Library file does not necessarily open the selected database. Rather, iTunes opens the last database it successfully opened, or if that was in the "normal" <User's Music>\iTunes location, but is missing, it will create a new empty library.
You can open an alternate library file, or create a new one, by holding down shift as you start iTunes. Although you can open the library files in the Previous iTunes Libraries folder this way, your library will perform better if you restore the archived library database to the main iTunes folder in the way that I have described.
Your most recent library may be present in the main iTunes folder as a .tmp file, or recoverable via a file undelete tool, however either of these files, if found, may be partially corrupt getting you no further forward.
The two most recent releases of iTunes were June 11th and March 28th 2012..
Yes I read your post, but I don't know if you know all of the above. If you had a full backup of your library you could just restore that. It is possible that what you've tried so far hasn't yet brought back the most complete version of your library that is available to you. As a last resort you will have to work with what you have and add in whatever media is not in that version of your library, accepting the loss of recently added ratings, playlists & play counts.
You can simply add the entire iTunes Media folder using File > Add Folder to Library folder which should ignore everything already in the library and only add new (to that database) stuff. If there is any chance that your iTunes media folder contains .m3u playlist files the import process will also import all of those, which may not be what you want. iTunes Folder Watch would then present a better approach.
tt2

How to recover data in iPhoto?

How to recover data from iphoto?

I haven't done any conscious backup.
Time to start. Now. Using a computer without a back up is like driving without a seat belt. You'll be fine as long as nothing goes wrong, but if something does go wrong it'll be a much bigger mess.
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.

How to recover to keep tablespaces working after datafile deleted on OS

hi,
given situation like this :
1. OS HPUX 11i
2. Oracle 9.2 or 10g
3. tablespace AAA have a datafile AAA.dbf
4. AAA.dbf has been deleted by a guy on OS by accident
5. it's a production database , i have other copy of product running elsewhere
6. we can forget about the data on this tablespace , just wanna make sure new data will still be inserted
I know there is a magic way involving file descritpor to recovery the file on OS if it was still opened by the process
seems it only works on linux or solaris , since HPUX don't have /proc
here is what i had done ,
1. offline drop the tablespace
2. export tablespace AAA from other DB without data but everything else
3. import them into DB without AAA now
only problem seems application couldn't insert into the tables ,Object priveledge not granted
i'd checked the export file , those object grant SQL are right there , i just don't know why import hasn't worked
so my question is
if it were you ,
1.do you have any better idea of how to recover
2.if you any dirty and fast way of recovery File on HP box , appreciate that too
3.can you image why import doesn't seems getting priveledge imported ? my DB version 9.2.0.4
many thanks
br/ricky

thanks , aman ,lenord and you all
looks like i'm the sinful :)
to clear it up ... it's not me who did it , one of our guys , same thing ,hum ~~
he deleted the backup , cause it's full and auto backup is not ongoing , and he's trying to make things right
he deleted the datafile , cause i told him to rename the file to another space , coz vgdb is full , screw up that too ..
yeah , it'a real production database ~~ , so ,if anybody learn somethings on this , credit on me , :)
the version is 9.2.0.4 , but gonna move to 10g soonor or later , so put it there , to see if in 10g , we can do better ..
tablespace created like five years ago , so , apply all archive since would be crazy ~
this database have 500 Tablespaces , and thoudsands of tables , and the one lost is a important one ,
but data in it , we can bear loss
what i do , is offline drop the tablespace , and import the tablespace without data from other production DB ...
only it didn't work out so well with object grant , and application still not inserting ...
why i post it here , is i wanna learn better ways in this kind of situations ...
i thought my way is not good enough
anway , i'll look at all your suggestions
thanks
br/ricky
Edited by: zs_hzh on Sep 15, 2008 10:12 PM

How to recover customer marks for deletion

Dear Friends,
How to recover customer marks for deletion.
Pls give me the compelete process.
Thanks,
Atul

Dear Atul
Do you want to change the change the deletion flag set for a customer??
If so, go to <b>XD06</b>, give all the datas required and press enter. Now you can see some white boxes against the fields like "All areas", "selected for company code" etc., Wherever tick mark is there, untick and save.
Thanks
G. Lakshmipathi

How to recover from Large Volume Table Insert

We are inserting 1 Million rows into table using ODI IKM Append. If half the way thru the job fails because of tablespace or other issue, how to recover? Does 50% rows are commited to db? What is the best way to handle this type of situation?

You can have different options for this.. You can commit them in every 1000 rows in the KM.You can also set the dml operation into one transaction and commit the same at the end of step.
Try to follow load plan for better restart options. If you cann't provide more undo table space then try loading less amount of records lets say 1 to 100,000 and then 100,001 to 200,000 like this which is little bit complex but you have to sacrifice something to overcome the issue.
I believe you must have data in C$ and I$ step. Hence you process these data instead of loading again from original source. So it depends on you, how you are going to design the total process. You can better judge it. Talk with your dba about this issues as well.
Thanks
http://bhabaniranjan.com/

Smon process in ASM instance

Dear All,
Can anyone of you tell me what exactly the SMON process will do in ASM instance. As SMON in db instance will recover the db instance. But in case of ASM instance i think it will do little bit different
Thanks in advance

Hi There ,
The system monitor process (SMON) is in charge of a variety of system-level cleanup duties. The duties assigned to SMON include:
Performing instance recovery,
Recovering terminated transactions that were skipped during instance recovery because of file-read or tablespace offline errors. SMON recovers the transactions when the tablespace or file is brought back online.
Coalescing contiguous free extents within dictionary-managed tablespaces.
SMON checks regularly to see whether it is needed. Other processes can call SMON if they detect a need for it.
Process Architecture
Thanks,
Anuj

HT4314 does anyone know how to recover game center's drgonvale levels for my 6 year daughter.

does anyone know how to recover game center's drgonvale levels for my 6 year daughter?
maybe i' asking in the wrong place.
thanks for taking time anyway.

Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
A
1. iOS- Forgotten passcode or device disabled after entering wrong passcode
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. Restoring iPod touch after forgotten passcode
4. What to Do If You've Forgotten Your iPhone's Passcode
5. iOS- Understanding passcodes
6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
7. iOS - Unable to update or restore
Forgotten Restrictions Passcode Help
iPad,iPod,iPod Touch Recovery Mode
You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
You can restore from a backup if you have one from BEFORE you set the restrictions passcode.
Also, see iTunes- Restoring iOS software.

How to recover the notebook?

Hi guys,
Ok so I've got a really bad virus on my computer, which my Norton software is not picking up.
Somebody told me I could reboot my computer to get rid of the virus but my files will be lost.
I think the process is called recovery as it recovers the manufacturer's original settings.
As you may have already guessed by my lack of knowledge when it comes to computer terms, I haven't a clue how to do this.
Please can someone help!
Thanks for your time!

Hi
Why you dont read some threads here in the forum if you have no clue how the recover works?
There are a lot of threads about this theme!
By the way; new Toshiba notebooks are not delivered with recover disks.
You have to create one using Toshiba recover disk creator or you could use the Toshiba HDD recovery!
PS: user manual contains also some details about recovery process!

How to reuse the process chain which has been deleted?

hi
guys
how to reuse the process chain which has been deleted?
your regards
suresh

if you want to "recover" the deleted process chain, try to check DEV / QAS / PRD. Maybe there is a copy still available
Or check the following tables in SE11: RSPCCHAIN / RSPCCHAINATTR
Good luck !

How to recover SMON process

Similar Messages

Maybe you are looking for