How to recover the lost OutBoound Queues data
Hi All,
During Upgradation of ECC to EHP,the queues in the Outound are Deleted or exported.Due to this , Data is not coming to BI system from the last month.
Please let me know what needs to be done in the Source system & what are the authorization are required ..........
This is urgently required..thanks..
Regards,
kalim.
HI,
To recover the lost data, you will have to first delete and fill the set-up tables.
On the BW side after the set-up tables are filled, do an init w/o data transfer to set the delta. Next extract data from set-up tables using Full-repair request. This will help you get the data which was lost.
After the full repair, you can continue extracting delta in the normal way since the new pointer will be set when you did the init.
Hope this helps.
Regards,
RahulM
Similar Messages
-
How to recover the lost contact list if I had not done the back up yet
Anyone knows how to recover the lost contact from iPad which is over write by using iCloud without back up yet ?
Oh , it's terrible !
-
Local folder content disappeared. How to recover the lost content?
local folder in Thunderbird was used to move messages from inbox.
Although local folder still in place, the contents disappeared.
(content was folders and subfolders )
Where would the lost contents be and how to recover?
Thankshttp://kb.mozillazine.org/Disappearing_mail
-
HT4910 How to recover the lost "Calendar" contents
I'm the iPad mini beginner. I typed a lot of stuffs in the "Calendar" and started using it. I found it very convenient. One day, I received the message saying "iCloud is not backed up for last three weeks.........Please press OK", or something like that. Then, I unconsciously pressed the ok button. Later on, I found unfortunately that all contents in the "Calendar" have disappeared. Did I lose the data for good, or is there any way I can recover the data? Thanks.
Oh , it's terrible !
-
Help: lost all of my data from my iphone 4 during the latest UPDATE received from Apple via the Settings Tab. Wondering if I should take it in to the Apple Store for help or there's no chance for recovery. Thanks.
Welcome to the Apple Community jjhill4j3.
If you kept an iCloud back up...
Navigate to Settings > General > Software Update and install any updates available.
Navigate to Settings > General > Reset > Erase all contents and settings on the device you want to restore.
When this completes and the Set-Up Assistant starts, choose "Restore from iCloud Backup" and enter your iCloud account and password. You will see the three most recent backups for each of the devices on which you enabled Backup. Choose which backup to restore from. -
How to recover the autocomplete data from a Time Machine backup?
How to recover the Safari 5.1.7 autocomplete data from a Time Machine backup on Mac OS X 10.6.8 (Snow Leopard)?
To solve other issues (Safari crashing sometimes when saving web pages), I selected:
Safari - Empty Cache
Safari - Reset Safari - Selected ALL - Reset
I could later on recover some Safari autofill data restoring
HD/Users/~/Library/Cookies/Cookies.plist
HD/Users/~/Library/Safari/Form Values
HD/Users/~/Library/Safari/History.plist
but other autocomplete data is missing, including the one when filling web form search fields in web pages, for instance, and also some username and password login data on some web sites.
How to restore all such data from the Time Machine Backup?
Thanks!I also recovered:
HD//Users/~/Library/Keychains/login.keychain
What else should I recover? -
How to recover the data from a dropped table in production/archive mode
How to recover the data/change on a table that was dropped by accident.
The database is on archive mode.Oracle Version. ? If 10g.
Try this Way
SQL> create table taj as select * from all_objects where rownum <= 100;
Table created.
SQL> drop table taj ;
Table dropped.
SQL> show recyclebin
ORIGINAL NAME RECYCLEBIN NAME OBJECT TYPE DROP TIME
TAJ BIN$b3MmS7kYS9ClMvKm0bu8Vw==$0 TABLE 2006-09-10:16:02:58
SQL> flashback table taj to before drop;
Flashback complete.
SQL> show recyclebin;
SQL> desc taj;
Name Null? Type
OWNER VARCHAR2(30)
OBJECT_NAME VARCHAR2(30)
SUBOBJECT_NAME VARCHAR2(30)
OBJECT_ID NUMBER
DATA_OBJECT_ID NUMBER
OBJECT_TYPE VARCHAR2(19)
CREATED DATE
LAST_DDL_TIME DATE
TIMESTAMP VARCHAR2(19)
STATUS VARCHAR2(7)
TEMPORARY VARCHAR2(1)
GENERATED VARCHAR2(1)
SECONDARY VARCHAR2(1)
SQL>M.S.Taj -
i recently have ipad but before i sell it i made a back up of it and by an iphone when i put all the date on my iphone some files and software did not install is there anything i can do to recover the lost data? please help
I don't think you're on iOS 5, I think you're using iOS 6. That's the latest version.
Unless you've used iCloud to back up your documents, you won't be able to restore them. And for future reference, you don't have to uninstall Pages to update your iPad anymore. Sorry about this. -
Hi Everyone,
I lost my KN presentation that i spent a day with my boss to finish it. I lost it by mistakenly shutting down my Macbook pro. Can anyone please tell me how to recover the files back as i'm really2 in trouble and my job depends on it...
hmmm...how i hate myself for being such a careless person...
PLEASE HELP ME...
Thank you in advance.
Keynotes '09
Version 5.1.1 (1034)How exactly did you shut down your laptop? Not a hard restart (holding down the power button), I hope... if that's the case, then it is extremely unlikely the file is still intact on your computer. If it is, it would be an image on your RAM, and it is time-and-resource-intensive to recover it if it is even there. RAM memory is disposable and always being written over. Sorry dude...
If it wasn't a hard restart, Keynote should have made a backup, unless you 'Force Close'd it.
It really all depends on how your mac was shut down. -
I upgraded to Snow Loepard OS. But not all the information in the address book was transfered. How can I recover the lost information from my old address book?
No I did not make a copy of my address book.
Some information was moved over, many did not.
I do not see a pattern.
I think all the info is still on the hard drive, I just don't know how to recover it. -
i formated my macbook pro with windows 7 and i lost all the drivers, does anyone know how to recover the drivers?
How did you get them to install the first time and where did you get them?
Read the Installation Guide, Boot Camp 4.0 FAQ and the Windows 7 FAQ.
Here's the Boot Camp Manual. -
Using the "if you have never synched with itunes" instructions, will I lose all data on the phone? That is the most important information, how to recover the data. The phone is fungible.
Thanks @ KiltedTim, but losing "only" any data is really not acceptable and, in this case, the phone had not been backed up, but thanks for taking the time. Also, yes, fungible means what I think it means. An iphone is a completely substitutible commodity, unlike my data, so instructions that inform me as to how to fix a phone I could replace for a small sum of money while failing to address the more important issue of the data are almost useless - they potentially save me the $99 it would cost me to replace the phone if I were so inclined to trust another apple product. Not worth the hour it took to find them or the 35 minutes on the phone to confirm my suspicions about the data.
-
Satellite Pro M30 - how to recover the data?
I get a disk read error when I try to boot my Sat Pro M30 running XP Pro, just after the In Touch with Toshiba screen.
Using the Revovery DVD that came with the computer when purchased and entering advanced mode I'm trying to use check local Image File. It doesn't seem to find any Image file. Is it possible to recover or rebuild image file?
There are some data I would like to recover from the HD so I'm trying to avoid reinstalling the system until I've recovered the files.
Have tried to read from the HD using a cabinette and a new NP running Vista but it didn't work. Is there a general problem reading a XP HD from VISTA?
Any suggestions how to recover the data would be very much appreciated!
Johancabinette ? Do you mean "USB Hard Disk Caddy" ?
To recover your data, you can connect the HDD using a USB Adapter to another PC running XP or Vista. The drive should show up as a Drive letter (such as E: Drive), and you will be able to copy the files.
When you say "but it didn't work", what was the problem exactly? -
Due to reinstallation of mac 2nd partition is nt showing how to recover the partition and data
Due to reinstallation of mac 2nd partition is nt showing how to recover the partition and data
If you have no backup your only option is to perform incomplete recovery (point-in-time recovery) to the time just before the drop, export the table and then restore the database (for example, from a cold backup taken just before the incomplete recovery,) and import the table. This obviously requires a full backup
taken before the drop which you don't seem to have, so the answer is "regrettably no."
If you have a backup;
Take backup of ur current db, apply previous day backup, do point in time recovery to get table back,export table, shutdown and apply latest backup, import table back
Regards, -
How to recover a lost archive log file?
How to recover a lost archive log file? Do I need to open the database with RESETLOGS after recovery?-------No.156
I think he might rewrite the question in his own words.
I guess in the event of lost archive logs during db recovery, you have to open RESETLOGS and say goodbye to some of the data.
Maybe you are looking for
-
How to find list of all open windows?
Hi, I was wondering how to find a list of all open windows on the desktop. I have been able to use this to find the number of open windows in the AIR application: var windows:Array = NativeApplication.nativeApplication.openedWindows; test.text = Stri
-
My Ipad 2 was to be reformatted and I lost all my apps I purchased from iTunes. Is there a way of getting these back
-
Invoice verification tolerance limits
Hi what are tolerance limits in invoice verification thanks
-
Are local Java programs only command line runnable? How can I create exe like programs? I already know about how Java doesn't use compilation, but bytecode interpretation. Can applets run locally or only browserly.
-
everything works well but FF asks me to update after a few hours everyday, as if i had not done it already. this has never happened before.