How to recover the smart center

I replaced the hard drive in my TouchSmart 300-1129 I had to install a new operating system because my recovery disk was not compatible with my new hard drive. Now I have lost the smart center. And I can not figure out how to fix it and or recover it.

Hi @screenname12345 ,
I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publically post ( serial numbers and case details).
If you are unfamiliar with how the Forum's private message capability works, you can learn about that here.
Regards,
George
I work for HP

Similar Messages

How to find the cost center group from cycle/ segment in CO module?

Hi All,
I need to fetch the list of cost centers in the cost center group against the cycle.
Is there any table which will store the list of cost centers against the cycle?
or else, what I was thinking is use of BAPI BAPI_COSTCENTERGROUP_GETDETAIL, which will give me the list of cost centers,
but we need to pass the controlling area + cost center grp to fetch the cost centers from BAPI, I have controlling area with me but not the cost center grp name, only I have Cycle info lke cycle name, segment name, seq number. so how to find the cost center grp name from the cycle name?
Regards,
Mrunal

FM: RK_AL_CYCLE_READ
CHECK TABLE: T811K

How to delete the Cost center line item data

How to delete the cost center line item data of particular cost center and only one cost center is exisiting for that company code.
Is there any way to delete the line items in that cost center.
Can data archiving & deleting can help us..........
does it have any effect over other cost center data....
any input needed.........
regards
rajesh

Hi,
i found 2 reports for you:
1) CO_TOTAL_WRI - Archiving CO Totals Records
2) RKCOITW1 - Archiving CO Line Items: Write Program
from 2) is a linlk to customize archiv-parameters
-> start it with transaction se38 / sa38
A.

How to recover the autocomplete data from a Time Machine backup?

How to recover the Safari 5.1.7 autocomplete data from a Time Machine backup on Mac OS X 10.6.8 (Snow Leopard)?
To solve other issues (Safari crashing sometimes when saving web pages), I selected:
Safari - Empty Cache
Safari - Reset Safari - Selected ALL - Reset
I could later on recover some Safari autofill data restoring
HD/Users/~/Library/Cookies/Cookies.plist
HD/Users/~/Library/Safari/Form Values
HD/Users/~/Library/Safari/History.plist
but other autocomplete data is missing, including the one when filling web form search fields in web pages, for instance, and also some username and password login data on some web sites.
How to restore all such data from the Time Machine Backup?
Thanks!

I also recovered:
HD//Users/~/Library/Keychains/login.keychain
What else should I recover?

How to recover the data from a dropped table in production/archive mode

How to recover the data/change on a table that was dropped by accident.
The database is on archive mode.

Oracle Version. ? If 10g.
Try this Way
SQL> create table taj as select * from all_objects where rownum <= 100;
Table created.
SQL> drop table taj ;
Table dropped.
SQL> show recyclebin
ORIGINAL NAME    RECYCLEBIN NAME                OBJECT TYPE DROP TIME
TAJ              BIN$b3MmS7kYS9ClMvKm0bu8Vw==$0 TABLE        2006-09-10:16:02:58
SQL> flashback table taj to before drop;
Flashback complete.
SQL> show recyclebin;
SQL> desc taj;
Name                                      Null?    Type
OWNER                                              VARCHAR2(30)
OBJECT_NAME                                        VARCHAR2(30)
SUBOBJECT_NAME                                     VARCHAR2(30)
OBJECT_ID                                          NUMBER
DATA_OBJECT_ID                                     NUMBER
OBJECT_TYPE                                        VARCHAR2(19)
CREATED                                            DATE
LAST_DDL_TIME                                      DATE
TIMESTAMP                                          VARCHAR2(19)
STATUS                                             VARCHAR2(7)
TEMPORARY                                          VARCHAR2(1)
GENERATED                                          VARCHAR2(1)
SECONDARY                                          VARCHAR2(1)
SQL>M.S.Taj

How to change the Profit Center in Sales Order

Hi Gurus,
Previously they setted the profit center (YB999) in sales order, now i want to change the profit center and need to give the amount into this profit center 100500.
So, could you guide me how to change the profit center in sales order.
Thank you for your replies.....
Thanks & Regards,
Chandrababu.B
Edited by: Chandrababu Naidu on May 25, 2011 12:44 PM

Hi
If this SO is processed partially - i.e. transactions happened - You cant change it
You can use ABAP and change it in Debug mode, but not advisable... Better to short close the SO and open a new SO for Balance qty
br, Ajay M
Edited by: Ajay Maheshwari on May 25, 2011 5:10 PM

How to recover the database when some of the archive log file get deleted.

I am facing a problem with Oracle database, which is related to archivelogs.
Our development database is running in archivelog mode, but we don't have backups scheduled and have no recovery catalog.
When the database was in running condition, disk got full, so some archivelogs were deleted manually.
After this they restarted the DB, and now DB is not coming up. Errors are as follows:
SQL> startup
ORACLE instance started.
Total System Global Area 1444383504 bytes
Fixed Size 731920 bytes
Variable Size 486539264 bytes
Database Buffers 956301312 bytes
Redo Buffers 811008 bytes
Database mounted.
ORA-01589: must use RESETLOGS or NORESETLOGS option for database open
SQL> alter database open resetlogs;
alter database open resetlogs
ERROR at line 1:
ORA-01113: file 1 needs media recovery
ORA-01110: data file 1: '/export/home/oracle/dev/ADVFRW/ADVFRW.system'
SQL> recover datafile '/export/home/oracle/dev/ADVFRW/ADVFRW.system'
ORA-00283: recovery session canceled due to errors
ORA-01610: recovery using the BACKUP CONTROLFILE option must be done
SQL> recover database using backup controlfile;
ORA-00279: change 215548705 generated at 09/02/2008 17:06:10 needed for thread
1
ORA-00289: suggestion :
/export/home/oracle/dev/ADVFRW/ADVFRW.archivelog1/LOG_ADVFRW_1107_1.ARC
ORA-00280: change 215548705 for thread 1 is in sequence #1107
Specify log: {<RET>=suggested | filename | AUTO | CANCEL}
/export/home/oracle/dev/ADVFRW/ADVFRW.archivelog1/LOG_ADVFRW_1107_1.ARC
ORA-00308: cannot open archived log
'/export/home/oracle/dev/ADVFRW/ADVFRW.archivelog1/LOG_ADVFRW_1107_1.ARC'
ORA-27037: unable to obtain file status
SVR4 Error: 2: No such file or directory
Additional information: 3
Specify log: {<RET>=suggested | filename | AUTO | CANCEL}
CANCEL
Media recovery cancelled.
SQL>
1. How to recover the database and bring it online
Any help will be highly appreciated.
With Regards
Hemant Joshi
Edited by: hem_Kec on Sep 7, 2008 9:07 AM

Hi,
Archive log files are the copies of redolog files.As redo log files are circularly overwritten,oracle generates archive log file of the corresponding redo logfiles being overwritten.So if you have a backup that dates back to 10 am in the morning and if your database creashed at 3 pm,you cannot use the redo log files alone as they have incomplete information.To completely recover the database upto 3 pm,you need archive log files generated between 10 am to 3 pm. In your case since you are missing one archive log file,you cannot perform complete recovery and hence would suffer data loss.

How to determine the cost center

Dear experts:
Could you give me some suggestions about how to determine the cost center depending on the different
storage location when we use the t-cdoe MI07
Thanks in advance.
Rong

Hello experts!!!
how have you resolved this issue???
I have the same situation, and i dont know how to manage this.
Thank you very much in advance.
Best regards,
M. Cecilia Vacatello.

Hi Everyone, i lost my KN presentation that i spent a day with my boss to finish it. I lost it by mistakenly shutting down my Macbook pro. Can anyone please tell me how to recover the files back as i'm really2 in trouble and my job depends on it...

Hi Everyone,
I lost my KN presentation that i spent a day with my boss to finish it. I lost it by mistakenly shutting down my Macbook pro. Can anyone please tell me how to recover the files back as i'm really2 in trouble and my job depends on it...
hmmm...how i hate myself for being such a careless person...
PLEASE HELP ME...
Thank you in advance.
Keynotes '09
Version 5.1.1 (1034)

How exactly did you shut down your laptop? Not a hard restart (holding down the power button), I hope... if that's the case, then it is extremely unlikely the file is still intact on your computer. If it is, it would be an image on your RAM, and it is time-and-resource-intensive to recover it if it is even there. RAM memory is disposable and always being written over. Sorry dude...
If it wasn't a hard restart, Keynote should have made a backup, unless you 'Force Close'd it.
It really all depends on how your mac was shut down.

How to Make the Cost Center filed Mandatory ?

While entring the Doc in FI for Expense A/c, How to Make the Cost Center filed Mandatory?

Hi,
Got to field status groups and select cost center field as required field.
Refer to this documentation
http://www.sap-basis-abap.com/sapfi012.htm
Please let me know if you need more information.
Assign points if useful.
Regards
Sridhar M

How to block the cost center

Dear Guru's
Can any tell me how to block the cost center, can we detele which is having values. can we delete which is not having values
Regards
Chandra Sekhar Reddy.P

Hi,
Once you post actual values or any planning exists on this cost center you cant delete.
To ristrict posting to cost you have two options.
1.You can change validity period.
change end from 12/31/9999 to what ever date you want to stop posting(e.g. as of today 10/23/08)
2. lock all postings to cost center on Control data tab in KS02.
Thanks,
Rau

How to recover the mailboxes from the decommissioned exchange db .

Hello All,
I have 2 EDB files on my exchange server which is no longer active its been decommissioned and the EDB mailbox is dismounted,
I would like to recover few emails/mail boxes from the EDB file and am not able to find any free tool which can help me in recovering the emails,
1. How to recover the mailboxes from the decommissioned exchange db
2.Tried using from free 3rd party tools which helped me view the mail boxes however am unable to convert or recover the emails using the demo/ trial version and cant think of buy/purchasing the application since its very expensive $299 and $399
I know there are lot of exchange gurus here who can help me with some workaround in recovering the mailboxes from the EBD or on how to convert the edb file to pst
Looking forward to get some help from exchange gurus
Thanks,
Jean
Jean

Hello All,
I have 2 EDB files on my exchange server which is no longer active its been decommissioned and the EDB mailbox is dismounted,
I would like to recover few emails/mail boxes from the EDB file and am not able to find any free tool which can help me in recovering the emails,
1. How to recover the mailboxes from the decommissioned exchange db
2.Tried using from free 3rd party tools which helped me view the mail boxes however am unable to convert or recover the emails using the demo/ trial version and cant think of buy/purchasing the application since its very expensive $299 and $399
I know there are lot of exchange gurus here who can help me with some workaround in recovering the mailboxes from the EBD or on how to convert the edb file to pst
Looking forward to get some help from exchange gurus
Thanks,
Jean
Jean
Hello,
There are so many third party software available in Web that can easily fix your Exchange Database issues, you can check out such a software from here http://www.exchangerecoverytools.org . By using this software (Kernel for Exchange Server Recovery),
you can immediately repair and convert damaged EDB to PST files.

How to recover the deleted reports from crystal reports XIR2

Hi,
There have been few crystal reports have been deleted from crystal environment and i would like to know how to recover them. please advice the best possible ways to recover them. CMS repositoty in SQL server database
thanks in advance
Regards,
Krishna

Hope, your question is this "How to recover the deleted Crystal reports in XI R2".
Answer for this question is...
Yes, it is possible if you have backup of your CMS and FRS.
Copy the CMS database from the backup to your database server and point the CMS ODBC system DSN to it.
Copy the backed up file store to a Temp directory.
Change the path of input and output file repository servers in the CMC, for each server, to the Temp file store directory.
You will now be able to find the reports. Copy those reports to the BO server's local disk, or create a BIAR file using the Import Wizard.
Point the ODBC system DSN back to the original database and also change the paths on input file repository and output file repository servers back to their original locations.
Publish the reports to Enterprise from the BusinessObjects server's local hard disk.

How to debug the smart forms

Hi All,
Can any body guide me how to debug the smart forms.
Thanks & Regards,
Satish.

Hi,
The the best way to debug the form is to put a breakpoint in the function module generated by the smartform.
Procedure:
Open the smartform we want to debug.
Goto Environment -> Function module name.
Open the function module in SE37. From the menu GOTO -> main program. Open the last include.
This incude contains the entire code ie the code we have written in initalization + form routines + program lines + sap generated code.
Even we can search for the text nodes, folders, templates, tables, graphics, address nodes etc with their names.
Put a breakpoint at any point you want.
If we issue any doc which triggers this form, when the control reaches the break point it will stop.
Please note that hard-coding the break points in the code ( Program lines ) is not recommended and it can´t be done unless if it is development server.
So, always put a session break point in the related function module.
We can use SFTRACE transaction to know the sequence of the control flow.
If you want to break at each and every text that is printed on the output form put the break points in the forms.
1. %write_text to break at text element.
2. %WRITE_TEXT_MODULE to break at text module.
3. %WRITE_INCLUDE_TEXT to break at include text.
Please put a break point at the first sy-subrc check.
If the control reaches this point, you can find the name of the element in the varible NAME and the content in the text node in %TEXT.
Its easy to understand the sequence of the printing if we put a breakpoint as stated above.
Regards,
Satish.

How can define the cost center (department) manager?

We are on 11.5.0.10
Financials implementation is done(GL,AP,AR,FA,IA)
In iAssets System, we want to set up the approval method to use "cost center-based approvals". (For cost center-based approvals to work properly, each cost center must have a manager defined.)
How can define the cost center (department) manager? Thanks.

I believe this is done in the organization definition screen. For each organization, we attach a classification "Company Cost Centre" (the same place where we attach the classification operating unit, inv org etc). In the others section, there are 2 additional information - GL company cost centre and reporting information. In the GL company cost, you need to attach the balancing segment value and the cost centre value. In the reporting information, you need to attach the manager for that organization. This ay the relationship between the cost centre and manager is created.
Hope this clarifies.
Vinit

How to recover the smart center

Similar Messages

Maybe you are looking for