How to recover the system for Satellite L750-A010?

What is the possibility of recovery system for retrieval device L750-a010?

In users manuals you can find detailed description about recovering and recovery media creation.
Users manual document is preinstalled on every new notebook and you can find it under start > all programs > Toshiba > users manual.
Of course easiest way to install recovery image is to use HDD recovery option as suggested by Randy.
Check also follow Toshiba document - http://aps2.toshiba-tro.de/kb0/HTD1303440001R01.htm

Similar Messages

How to recover the password for my macbook pro?

how can i recover the password for my macbookpro

chouman1,
which model MacBook Pro do you have, and which version of OS X is installed on it? Was the password for an administrative user account, or for a standard user account, or was it a firmware password?

How to recover the system?

Hi everybody
I´ve recently bought a mac mini with mavericks. How can I made a security copy of Mac OS X in order to recover my system in case of hard drive failure?
Thank you very much for your attention.
Manu

Not needed, If the Mac originally came with Mavericks or even Lion, you can boot to internet recovery mode without a hard disk
OS X: About OS X Recovery
Other you boot to recovery mode and restore an external hard drive for the internal drive. For more info see:
I am adding an SSD Drive to my Mac...: Apple Support Communities

How to recover the system user password ?

I lost the system user password of my Oracle system. Is there any way I can recover the password ?
Thanks in Advance
Jimson

goto Server Manager (svrmgrl) and connect internal, then type
alter user system identified by some_password;

How to recover the system using recovery disc

please tell me the steps to perform the system recovery using the recovery disc.
my notebook model i hp pavilion dv-4 5009tx

Hi:
Please read the info at the link below.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01867418&cc=us&dlc=en&lc=en
Paul

Does anybody know how to get the license for Adobe LiveCycle if i dont have the installation disk?

Hi,
I no longer have the installation disk for Adobe LiveCycle and i need to install it onto a different PC due to upgrading hardware etc... Does anybody know how to recover the licence for the version of Adobe LiveCycle we have? Can it be found in the registry or anything?
Thanks.

Sorry, but Apple does not provide technical support via email, so they have no published email addresses. You will need to find a way to call them. Or make an appointment with the Genius Bar at an Apple Store, if there are any near you, and have them follow up.
Regards.

System Image Restore Fails "No disk that can be used for recovering the system disk can be found"

Greetings
                                    - Our critical server image backup Fails on one
server -
Two 2008 R2 servers. Both do a nightly "Windows Server Backup" of Bare Metal Recovery, System State, C:, System Reserved partition, to another storage hard drive on the same machine as the source. Active Directory is on the C: The much larger D: data
partition on each source hard drive is not included.
Test recovery by disconnecting 500G System drive, booting from 2008R2 Install DVD, recovering to a new 500G SATA hard drive.
Server A good.
Server B fails. It finds the backed-up image, & then we can select the date we want. As soon as the image restore is beginning and the timeline appears, it bombs with "The system image restore failed. No disk that can be used for recovering the system
disk can be found." There is a wordy Details message but none of it seems relevant (we are not using USB etc).
At some point after this, in one (or two?) of the scenarios below, (I forget exactly where) we also got :
"The system image restore failed. (0x80042403)"
The destination drive is Not "Excluded".
Used   diskpart clean   to remove volumes from destination drive. Recovery still errored.
Tried a second restore-to drive, same make/model Seagate ST3500418AS, fails.
Tried the earliest dated B image rather than the most recent, fail.
The Server B backups show as "Success" each night.
Copied image from B to the same storage drive on A where the A backup image is kept, and used the A hardware to attempt restore. Now only the latest backup date is available (as would occur normally if we had originally saved the backup to a network location).
Restore still fails.         It looks like its to do with the image rather than with the hardware.
Tried unticking "automatically check and update disk error info", still fail.
Server A SRP 100MB C: 50.6GB on Seagate ST3500418AS 465.76GB Microsoft driver 6.1.7600.16385   write cache off
Server B SRP 100MB C: 102GB on Seagate ST3500418AS 465.76GB Microsoft driver 6.1.7600.16385   write cache off
Restore-to hard drive is also Seagate ST3500418AS.
http://social.answers.microsoft.com/Forums/en-US/w7repair/thread/e855ee43-186d-4200-a032-23d214d3d524      Some people report success after diskpart clean, but not us.
http://social.technet.microsoft.com/Forums/en-US/windowsbackup/thread/31595afd-396f-4084-b5fc-f80b6f40dbeb
"If your destination disk has a lower capacity than the source disk, you need to go into the disk manager and shrink each partition on the source disk before restoring." Doesnt apply here.
http://benchmarkreviews.com/index.php?option=com_content&task=view&id=439&Itemid=38&limit=1&limitstart=4
for 0x80042403 says "The solution is really quite simple: the destination drive is of a lower capacity than the image's source drive." I cant see that here.
Thank you so much.

Hello,
1. While recovering the OS to the new Hard disk, please don't keep the original boot disk attached to the System. There is a Disk signature for each hard disk. The signature will collide if the original boot disk signature is assigned to the new disk.
You may attach the older disk after recovering the OS. If you want to recover data to the older disk then they should be attached as they were during backup.
2. Make sure that the new boot disk is attached as the First Boot disk in hardware (IDE/SATA port 0/master) and is the first disk in boot order priority.
3. In Windows Recovery Env (WinRE) check the Boot disk using: Cmd prompt -> Diskpart.exe -> Select Disk = System. This will show the disk where OS restore will be attempted. If the disk is different than the intended 2 TB disk then swap the disks in
correct order in the hardware.
4. Please make sure that the OS is always recovered to the System disk. (Due to an issue: BMR might recover the OS to some other disk if System disk is small in size. Here the OS won't boot. If you belive this is the case, then you should attach the
bigger sized disk as System disk and/or exclude other disks from recovery). Disk exclusion is provided in System Image Restore/Complete PC Restore UI/cmdline.
5. Make sure that Number and Size of disks during restore match the backup config. Apart from boot volumes, some other volumes are also considered critical if there are services/roles installed on them. These disks will be marked critical for recovery and
should be present with minimum size requirement.
6. Some other requirements are discussed in following newsgroup threads:
http://social.technet.microsoft.com/Forums/en-US/windowsbackup/thread/871a0216-fbaf-4a0c-83aa-1e02ae90dbe4
http://social.technet.microsoft.com/Forums/en-US/windowsbackup/thread/9a082b90-bd7c-46f8-9eb3-9581f9d5efdd
http://social.technet.microsoft.com/Forums/en-US/windowsbackup/thread/11d8c552-a841-49ac-ab2e-445e6f95e704
Regards,
Vikas Ranjan [MSFT]
------- This information is provided as-is without any warranties, implicit or explicit.-------

How to Identify incoming and outgoing IDOC in the system for last one year.

Dear All,
How to Identify incoming and outgoing IDOC in the system for last one year.
Regards
Ashok

Dear Anindya,
I used WE05 the result by giving direction outbound.Then on created field i put the value date.I m getting the output in the no of idoc number.
This is only the way to identify?
Thnx
Ashok
Edited by: ashok singh on Oct 22, 2009 8:40 AM

How can I uninstall Bootcamp and Recover the partition for the Mac HD

How can I uninstall Bootcamp and recover the partition for the IMac HD?

Boot into OSX. Go back into the Bootcamp utility in the Utilities folder and re-run it. It will give you the option to remove the Windows partition and make the OSX partition fill the whole drive again. OSX will NOT be lost in the process. No re-installing necessary. Only takes a few minutes or less to complete.

How to stop the system to ask for a password

How to make the system from asking for a password for every installation???

You can't do that. Apple is very careful to make sure that only an authorized person does installations.

How to can i recover the system??

Im having facing d problem with ma webcam nd also im facing some hanging problems nd im planing to recover ma system.. So hw can i recover the system nd pls explain d process

Hi,
What operating system are you using?
Have you created a set of Recovery DVDs?
Click the Start Menu and open Computer - do you see a Recovery D partition showing here?
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

How to customize the program for maximum performance on my system?

How to customize the program for maximum performance on my system?
My system: i7-5820k processor, motherboard msi x99s gaming7, DDR4 RAM 8GB ,videocard MSI 970/

What program?
Mylenium

Satellite Pro M30 - how to recover the data?

I get a disk read error when I try to boot my Sat Pro M30 running XP Pro, just after the In Touch with Toshiba screen.
Using the Revovery DVD that came with the computer when purchased and entering advanced mode I'm trying to use check local Image File. It doesn't seem to find any Image file. Is it possible to recover or rebuild image file?
There are some data I would like to recover from the HD so I'm trying to avoid reinstalling the system until I've recovered the files.
Have tried to read from the HD using a cabinette and a new NP running Vista but it didn't work. Is there a general problem reading a XP HD from VISTA?
Any suggestions how to recover the data would be very much appreciated!
Johan

cabinette ? Do you mean "USB Hard Disk Caddy" ?
To recover your data, you can connect the HDD using a USB Adapter to another PC running XP or Vista. The drive should show up as a Drive letter (such as E: Drive), and you will be able to copy the files.
When you say "but it didn't work", what was the problem exactly?

How to recover the database when some of the archive log file get deleted.

I am facing a problem with Oracle database, which is related to archivelogs.
Our development database is running in archivelog mode, but we don't have backups scheduled and have no recovery catalog.
When the database was in running condition, disk got full, so some archivelogs were deleted manually.
After this they restarted the DB, and now DB is not coming up. Errors are as follows:
SQL> startup
ORACLE instance started.
Total System Global Area 1444383504 bytes
Fixed Size 731920 bytes
Variable Size 486539264 bytes
Database Buffers 956301312 bytes
Redo Buffers 811008 bytes
Database mounted.
ORA-01589: must use RESETLOGS or NORESETLOGS option for database open
SQL> alter database open resetlogs;
alter database open resetlogs
ERROR at line 1:
ORA-01113: file 1 needs media recovery
ORA-01110: data file 1: '/export/home/oracle/dev/ADVFRW/ADVFRW.system'
SQL> recover datafile '/export/home/oracle/dev/ADVFRW/ADVFRW.system'
ORA-00283: recovery session canceled due to errors
ORA-01610: recovery using the BACKUP CONTROLFILE option must be done
SQL> recover database using backup controlfile;
ORA-00279: change 215548705 generated at 09/02/2008 17:06:10 needed for thread
1
ORA-00289: suggestion :
/export/home/oracle/dev/ADVFRW/ADVFRW.archivelog1/LOG_ADVFRW_1107_1.ARC
ORA-00280: change 215548705 for thread 1 is in sequence #1107
Specify log: {<RET>=suggested | filename | AUTO | CANCEL}
/export/home/oracle/dev/ADVFRW/ADVFRW.archivelog1/LOG_ADVFRW_1107_1.ARC
ORA-00308: cannot open archived log
'/export/home/oracle/dev/ADVFRW/ADVFRW.archivelog1/LOG_ADVFRW_1107_1.ARC'
ORA-27037: unable to obtain file status
SVR4 Error: 2: No such file or directory
Additional information: 3
Specify log: {<RET>=suggested | filename | AUTO | CANCEL}
CANCEL
Media recovery cancelled.
SQL>
1. How to recover the database and bring it online
Any help will be highly appreciated.
With Regards
Hemant Joshi
Edited by: hem_Kec on Sep 7, 2008 9:07 AM

Hi,
Archive log files are the copies of redolog files.As redo log files are circularly overwritten,oracle generates archive log file of the corresponding redo logfiles being overwritten.So if you have a backup that dates back to 10 am in the morning and if your database creashed at 3 pm,you cannot use the redo log files alone as they have incomplete information.To completely recover the database upto 3 pm,you need archive log files generated between 10 am to 3 pm. In your case since you are missing one archive log file,you cannot perform complete recovery and hence would suffer data loss.

How to recover the deleted reports from crystal reports XIR2

Hi,
There have been few crystal reports have been deleted from crystal environment and i would like to know how to recover them. please advice the best possible ways to recover them. CMS repositoty in SQL server database
thanks in advance
Regards,
Krishna

Hope, your question is this "How to recover the deleted Crystal reports in XI R2".
Answer for this question is...
Yes, it is possible if you have backup of your CMS and FRS.
Copy the CMS database from the backup to your database server and point the CMS ODBC system DSN to it.
Copy the backed up file store to a Temp directory.
Change the path of input and output file repository servers in the CMC, for each server, to the Temp file store directory.
You will now be able to find the reports. Copy those reports to the BO server's local disk, or create a BIAR file using the Import Wizard.
Point the ODBC system DSN back to the original database and also change the paths on input file repository and output file repository servers back to their original locations.
Publish the reports to Enterprise from the BusinessObjects server's local hard disk.

How to recover the system for Satellite L750-A010?

Similar Messages

Maybe you are looking for