How to recover using lion recovery disk assistant IN MAC MINI

how to recover using lion recovery disk assistant IF MY KEYBOARD AND MOUSE DOEST NOT WORK DURING BOOTING ?

Hello:
If my memory serves me correctly, the licence agreement that comes with a new system indicates that is good for one system....
Also, I do not think that something that would boot one type of processor would work on a different type.
Barry

Similar Messages

Can I use a SD Card rather than a USB stick when using Lion Recovery Disk Assistant

I'm using a MB Pro 2010, can I use a SD Card in the SD Card slot rather than a USB stick when using Lion Recovery Disk Assistant. I would like to use the 16GB chip with a single 1GB partition so I can dump a bunch of other backup stuff into the same chipper.

Yes, you could certainly do that, provided you have a card reader or an SD card slot available on both Macs and what you are copying is smaller than the capacity of your SD card.
But that's an awfully slow way to transfer GB's of files. 32GB SD cards cost anywhere from about $20 to $90 and of course the cheaper cards will be the slowest cards. Also need to consider that your iPhoto, iTunes and especially iMovie libraries may be larger than your SD card's capacity, and there is no easy way to 'split' them to save partial libraries and reassemble them on your new Mac.
A better solution is an external hard drive connected via FW or USB2. Much faster and without the capacity limit of an SD card. For example, you could get a 500GB OWC Mercury Elite Pro mini drive (5400 rpm) for $115 and after you are done using it for file transfer it would be a nice backup drive. Or build your own with an OWC mini case and a 500GB WD Scorpio 7200 rpm drive for about $120. Both support eSATA, FW400/800 and USB2.
Or you could just network the two Macs together and use the Finder to transfer files that way. Cheap, fast, and it works.

I wanted to create two partitions on my iMac w/ Lion using a Recovery USB i created using Lion Recovery Disk Assistant but I keep getting Partition failed message saying "couldn't unmount disk"

I have this recently purchased iMac that comes with a Lion but I wanted to have two partitions on the hard disk. I know that the Recovery HD partition is on the same hard disk so I downloaded the Lion Recovery Disk Assistant and created a Recovery disk using a USB. I boot up the system using the USB Recovery disk and run Disk Utility to create 2 Partitions on the hard disk but I get a Failed partition message saying "couldn't unmount disk". What could be the problem here?

admench wrote:
Thanks for your continued help Tony. Do you mean normal boot into the regular operating system setting i.e. no keys held down in bootup? I think I have tried this, with the same result.
Yes, that's what I meant. If that doesn't work, verify that you have a G.U.I.D. partition scheme (you probably do):

How to stop lion recovery disk assistant from downloading?

Since I planned to upgrade the stock disk on my macbook pro I created a USB stick backup of the Lion OS using Lion recovery disk assistant. It built a bootable copy of my Lion OS. I replaced the drive, booted from the USB stick Lion, formatted the new drive with disk utility with one OSX partition, and bunch of Linux partitions for the planned dual/triple/etc. boot. I then used the recovery disk menu to reinstall OSX on the new disk. It took off and started the download just like while booting with R key or from the recovery partition AGAIN!. This is a 2 hour proposition and is totally ridiculous. I need to be able to reinstall without downloading Lion every time. Any ideas on how to stop this new Apple invention from doing this download?

If you read the Disk Recovery Assistant documentation all that it does is put a copy of the Recovery HD onto the flash drive. There is no OS on it to reinstall, hence the reason for the Internet download.
If you wish to have a true bootable installer flash drive for your system, then here's what is involved. Start by going to this link: Downloading Hardware Specific Lion Installers. Follow the instructions very, very carefully because this can be a bit tricky.
Once you have the installer application:
Make Your Own Lion Installer
1. After downloading Lion you must first save the Install Mac OS X Lion application. After Lion downloads DO NOT click on the Install button. Go to your Applications folder and make a copy of the Lion installer. Move the copy into your Downloads folder. Now you can click on the Install button. You must do this because the installer deletes itself automatically when it finishes installing Lion.
2. Get a USB flash drive that is at least 8 GBs. Prep this flash drive as follows:
Open Disk Utility in your Utilities folder.
After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
Click on the Erase button. The format process can take up to several hours depending upon the drive size.
3. Locate the saved Lion installer in your Downloads folder. CTRL- or RIGHT-click on the installer and select Show Package Contents from the contextual menu. Double-click on the Contents folder to open it. Double-click on the SharedSupport folder. In this folder you will see a disc image named InstallESD.dmg.
4. Plug in your freshly prepared USB flash drive. You are going to clone the InstallESD.dmg disc image to the flash drive as follows:
Open Disk Utility.
Select the USB flash drive from the left side list.
Click on the Restore tab in the DU main window.
Check the box labeled Erase destination.
Select the USB flash drive volume from the left side list and drag it to the Destination entry field.
Drag the InstallESD.dmg disc image file into the Source entry field.
Double-check you got it right, then click on the Restore button.
When the clone is completed you have a fully bootable Lion installer that you can use without having to re-download Lion.

Tried to run Lion Recovery Disk Assistant, and now cannot access my external USB disk...

Greetings all,
I run the app after downloading it from Apple but it failed with a message that it could not use that drive. From then on, the drive is inaccesible. Disk Utility cannot repair it, it reports "incompatible filesystem". If someone has an idea on this I would be grateful as I have rather important personal and family info on this drive... It is a Lacie external USB drive of 1TB.

When did the file assistant fail saying it couldn't use the drive? If it's suddenly inaccessible, I can only assume it started the erase process before it failed?
So you know for future reference, review this link.
Excerpt from the above link:
System requirements
A Mac running OS X Lion with an existing Recovery HD
An external USB hard drive or thumb drive with at least 1GB of free space
How to use Lion Recovery Disk Assistant
The Lion Recovery Disk Assistant will erase all data on the external drive when creating the Recovery HD. You should either backup your data before running the Lion Recovery Disk Assistant, or create a new partition on the external drive.

HT4848 How do I get the Recovery Disk Assistant?

Reading 'OS X Lion: About Lion Recovery Disk Assistant' at http://support.apple.com/kb/HT4848?viewlocale=en_US . My 1 day old macbook pro would not let me or root login (after resizing the os partition with diskutil to install fedora linux) and I need to restore the OS. Now this paper and support engineer tells me to recover the OS I need a working OS to prepare the recovery USB disk. Isn't this a catch 22 situation? Why wouldn't Apple sent a $1 CD with the $2400 macbook? To save $1? I had OSX 10.6 from my mini and tried to boot from that - no go - the most expensive macbook MD386LL/A starts beeping in the middle of the boot and crashes.
Since apple does not have Lion 10.7 CDs anywhere on the applestore.com I will have to nicely pack it and sent it back to Amazon and get at new one so I can start with Lion Recovery Disk Assistant fist.
If only there was a notebook on the market with 1920x1200 screen...

Thanks for the link - good summary. I managed to recover the EFI partition 2 with system restore and I am running it now - I have a +1MB/s internet connection and the estimate is ~2h of download of some new software. I wonder how long this total internet recovery without the data on local disk would take - described in that link you sent? I will try this next with a spare SATA drive
This is not an improvement over a local CD image. There must be some explanation for this "enhancement". My guess it is to protect Apple from lost revenue and stop their customers form upgrading Apple computers for free.

Lion Recovery Disk Assistant

Hi, i want to do a backup to my lion.
I have already installed lion and the installation was deleted. I can use this link: http://support.apple.com/kb/DL1433 Lion Recovery Disk Assistant
To make a DVD disc or USB flash disk of lion?
And how much memory it takes?
Thanks, liran

Boy, am I a day late!
Already discussion on it here.

How do I make a recovery disk for my Mac running 10.5.8?

How do I make a recovery disk for my Mac running 10.5.8?

Hi, if tryly a PowerMac, (PPC instead of Intel), you may need a Firewire Drive to be bootable, most PPC Macs cannot boot OSX from a USB drive.
So we know more about it...
At the Apple Icon at top left>About this Mac, then click on More Info, then click on Hardware> and report this upto but not including the Serial#...
Hardware Overview:
Model Name: iMac
Model Identifier: iMac7,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.4 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 6 GB
Bus Speed: 800 MHz
Boot ROM Version: IM71.007A.B03
SMC Version (system): 1.21f4

How do i use the recovery disks and backup and restore my laptop in a new HDD without losing OS lic?

I am running a HP-DV6 6090ee laptop with windows 7 Home Premium 64bit OS. This problem started from last evening.
I am getting a "Smart Hard disc error" error message before boot and ater booting windows saying that my HDD is having problems and i need to backup and check the hdd.
After checking i found that i have a corrupted hdd and i am going to replace with a new one.
I need to know the following :
> How do i restore my windows license and my antivirus license in the new hdd?
> i dont currently have a OEM HP OS cd. can i use any windows 7 cd??
> at what stage should i use the recovery disk i created from the recovery partition be used? Whats its specific use?
I really appreciate any quick response as my current HDD is running out of life.
Regards
A

See these 2 Links...
Syncing to a New Computer...
https://discussions.apple.com/docs/DOC-3141
Recovering your iTunes library from your iPod or iOS device
https://discussions.apple.com/docs/DOC-3991

The lion recovery disk assistant shows that the the recovery hd on my computer is damaged or not present

i'm very confused. how to creat a new recovery HD?
thank you for helping me~

Hello:
Take a look at this article:
http://support.apple.com/kb/HT4718
Barry

This might help a few... Lion Recovery Disk Assistant

Apple has released a booting and recovery tool for Lion that can be put on a flash drive.
Here is more information...
http://support.apple.com/kb/DL1433

It may be useful for those which didn't took care to stop the Install process to keep a backup of the Lion Installer.
There is a recovery HD partition on the HD but what if the HD die ?
The partition would be helpless.
The USB built with the delivered app would solve the problem.
Of course, if you took care to backup the Installer, you would be able to run it which will spare you a lot of downloading.
Yvan KOENIG (VALLAURIS, France) mardi 9 août 2011 19:23:31
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.0
My iDisk is : <http://public.me.com/koenigyvan>
Please : Search for questions similar to your own before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

How do i use the recovery disks to get my information back on to my computer

ygyhnrlhjsf;gh

I'm not entirely sure what you are after here, but based on what you posted you may be looking for something like:
Select substr(JDIS.District.abbreviation,-2) ||'/'||
       substr(JDIS.District.Abbreviation, 1,1) As District_Name,
       count(case when JDIS.Warrant.Received_Date < trunc(add_months(sysdate, -3), 'q') - 365 AND
                        (JDIS.Warrant_Status_Code = 'A' Or
                        Jdis.Warrant.Close_Date >= trunc(add_months(sysdate, -3),'q'))
                  then 1 end) count1,
       count(case when JDIS.Warrant.Received_Date < trunc(add_months(sysdate,-3),'q') and
                       (JDIS.Warrant_Status_Code = 'A' Or
                        JDIS.Warrant.Received_Date <=add_months(trunc(add_months(sysdate,-3),'q')3)-1)
                  then 1 end count2,
       count(case when JDIS.Warrant.Received_Date >=trunc(add_months(sysdate,-3)'q') AND
                       (JDIS_Warrant_Status_Code = 'A' Or
                       JDIS.Warrant.Close_Date <=add-months(trunc(add_months(sysdate,-3)'q')3)-1)
                  then 1 end) count3
From ...
Where ...
Group by substr(JDIS.District.abbreviation,-2) ||'/'||
         substr(JDIS.District.Abbreviation, 1,1)
John

How do I use dual monitors on the latest mac mini?

What cable do I need to buy?
I'm still confused! I have two 23" Monitors with HDMI, DVi, & VGA.
Is this what I need?
http://store.apple.com/us/product/MB571Z/A/mini-displayport-to-dual-link-dvi-ada pter?fnode=53
Or maybe this
http://store.apple.com/us/product/MB572Z/B/mini-displayport-to-vga-adapter?fnode =53
Thank you in advance if you can please help me.

Sorry no, this one > Mini DisplayPort to DVI Adapter - Apple Store (U.S.) plugged into the combination Thunderbolt/Mini Display port and then a DVI-D cable to the monitor.

Recovery disk assistant for Maverick

I installed Maverick without a hitch. I have Time Machine working. I want to create a Recovery Disk on a USB. I had previously done this under Mountain Lion using the Recovery Disk Assistant. When I open this program to create a new Recovery Disk (for Maverick) the program says
"The Recovery Disk Assistant creates a disk that you can use to recover your Mac OSX Lion system".
Since I no longer have OS X Lion, will this program still work?
Thanks
Doug

http://www.macworld.com/article/2056561/how-to-make-a-bootable-mavericks-install -drive.html
http://arstechnica.com/apple/2013/10/how-to-make-your-own-bootable-os-x-10-9-mav ericks-usb-install-drive/
The latest version of Diskmaker X app, available here

Having problem with Recovery Disk assistant. Help

Hi apple community.
I am having trouble with Recovery Disk Assistant.
I want to re-install my mountain lion to restore all settings to default without deleting my personal data (e.g. Movies, documents, pictures, downloads, dowloaded programs like Photoshop cs6 and other downloaded apps)
I want to make a bootable usb for mountain lion.
so i am using the Recovery Disk Assistant.
And when i open the Recovery disk assistant, i was expecting that the OS that will go onto the usb was Mountain lion. But i get OS X Lion instead.
Of course i dont want to downgrade my mountain lion to its previos version of OS X which is Lion.
How should i do this? Thanks.

RDA simply copies your Recovery partition to the flash drive. If you're sure you have a Lion Recovery system, but you're running ML, then you need to download the ML installer from the App Store and run it.

How to recover using lion recovery disk assistant IN MAC MINI

Similar Messages

Maybe you are looking for