How to recover word files with readable format after formatting external hard drive?
I had tried different software. All software are able to recover word files but all word files having encoded content is there any way to convert it in readable format?
please provide any solution for this problem
Thank You.
Are you saying that these documents are password-protected? In that case, if you don't have the passwords, it's going to be next to impossible to open them.
Stefan Blom, Microsoft Word MVP
Similar Messages
-
How do i save files from mac pro to an external hard drive
how do i save files from mac pro to an external hard drive
Your external drive is formatted NTFS which OS X can read from but not write to. You can either install third-party software on the Mac to enable writing to the drive or repartition and reformat the drive for exclusive use with the Mac. If you don't need to move files between a Mac and a PC, then I would recommend the latter solution.
Tuxera NTFS 2012.3.2
NTFS for Mac OS X 9.5.3
To repartition:
Drive Preparation
1. Open Disk Utility in your Utilities folder.
2. After DU loads select the external hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size. -
How do i save files from my macbook to an external hard drive
Ive always been a PC user until recently when i purchased a macbook pro. I have an external hard drive that i used to back up all my files including word documents & mp3's etc. I now want to use the same hard drive to back up files from my macbook but i dont want to make a copy of the entire drive (like with time line) i just want to save individual files. When i go to do this, a light grey circle appears with a 'cross out' and i am unnable to copy/save the file. In the past (with PC) all i have had to do is drop and drag to perform this function. I have attempted to make an alias, copy and paste etc to overcome the problem but nothing thus far has worked.
Your external drive is formatted NTFS which OS X can read from but not write to. You can either install third-party software on the Mac to enable writing to the drive or repartition and reformat the drive for exclusive use with the Mac. If you don't need to move files between a Mac and a PC, then I would recommend the latter solution.
Tuxera NTFS 2012.3.2
NTFS for Mac OS X 9.5.3
To repartition:
Drive Preparation
1. Open Disk Utility in your Utilities folder.
2. After DU loads select the external hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size. -
Cannot Write Files to my Formatted External Hard-drive
I've been struggling with this problem for awhile now. I have a 200GB external hard drive that I used on my windows box. I have music on it and would like to use it on my macbook. When I plug it into my macbook, it mounts and shows up on the desktop. I can go into it in finder, and view the files and folders that are on it. I can also create new folders. However, when I try to read or write files to/from the hard drive, finder stalls at 'zero KB of x MB written'. If I try to copy a file to the drive, the file will be created but it will be of zero or very very small size.
I reformatted the drive with Disk Utility and also via the command line with 'diskutil reformat /dev/disk1s5' and these reformat the drive successfully, but the same problems occur.
What could be going on? The drive is not faulty, and it mounts just fine. I just can't read or write from the drive in OS X.
Please help! Thank you in advance.The NTFS file format is not really that compatible with macs (you can only "read" files, but not "write" to them). Also, while you can reformat a hard drive with the same or different file type, the NTFS type is the only one that will not let you go from having a NTFS formatted drive and reformatting it as a different format (you can do it again as NTFS but that's it). If you have a FAT or FAT32 formatted drive, you can go and reformat it as NTFS, but once it has had the newer windows format style done to it, you can't change it to anything else.
Also, as I think you said you could read from it at first, and then were not able to?, this would be because the reading of the files would have been fine, but as soon as you went and reformatted it again (which basically wipes the slate clean), you lost all the data that possibly was on there, and now as an NTFS format with no data, therefore nothing for a Mac to get a chance to "read", you have nothing and can only use this as an NTFS drive for windows (or any other possible OS that is NTFS compatible).
Sorry about the bad news... Try to sell it to a windows person and get another external hard drive (formatted as FAT32 or not pre-formatted yet, then format as FAT32) so that you can use that with your Mac... -
How can I drag files from my macbook to my external hard drive?
Hi! I can't seem to drag files to my hard drive using my macbook pro? How can I do that?
Welcome to Apple Support Communities
What happens when you try to drag a file to the external drive? If it just doesn't copy, it's because the external drive is formatted in NTFS, and OS X can't write in NTFS hard drives. There are some solutions:
1. Buy a third-party application like Paragon NTFS, which will allow you to write in your external drive.
2. Format the external drive with exFAT or FAT32, so you will be able to use the external drive with PCs and Macs.
If you choose the last one, copy all the data from the external drive to a Mac or PC before erasing the disk. I recommend you to use exFAT because it hasn't got the limitation of files bigger than 4 GB, so you have to format the external drive on a PC. That's because, if you do it in the Mac, PCs won't recognize it -
I am a DJ and I download a lot of music from websites. My internal hard drive's space is almost full which in turn makes my macbook really slow. I bought an external hard drive to download everything onto it instead but it still downloads onto my internal hard drive. Please help me
Assuming you're using Safari, the default download folder is specified in Safari>Preferences>General. Go there and you'll see where Downloads is currently selected. Click on that, select Other, navigate to the directory you want to use and click Select.
-
"Open with..." accesses external hard drive?
Whenever I right click on a file and choose "Open With" to choose the program that I want to open the file with, it spins up my external hard drive as if to look for the programs on it or something. This caauses quite a delay as it won't display the list of programs until the hard drive is at full speed. any ideas?
Have you unmounted the ext hd and rebooted? Does the mac start up normally? If you can save/copy what you have on the ext hd I would reformat & try.
What make is the ext hd & is it mac compatible?
As no other tekky answers have shown up it may be an AppleCare call...L -
FAT formatted external hard drive is not 'readable by this computer'
Hello support community
The problem: when I insert my 'FAT' formatted external hard drive (Samsung M3) into my mac book pro it comes up with the error message that says "the inserted disk is not readable by this computer" and I therefore cannot access the files.
The story (potential further details):
1. I had a problem with my mac where it took hours to load each time I turned it on, would only work when power was plugged in etc. so I had to reformat my mac hard drive (when I tried to veriify it said repair, that wouldn't work). So i'm starting with a recently reformatted, clean mac.
2. Before doing this I reformatted my external hard drive (whilst on windows machine) to FAT32 (so I can use on both windows and mac) so that I could back up my files.
3. I then transferred files from mac onto external hard drive and then also put them on a windows machine.
4. After reformatting mac hard drive when I then tried to transfer files back onto the mac I get the 'not readable' error.
The technical details:
Thank you very much indeed anyone who can help or can try and help
Cheers
AndyErase the drive and reformat using your Mac (Disk Utility)
-
how do i copy files from my macbook pro to my hard drive? These files were previously started on my old dell.
More then likely that external drive is formatted the Windows NTFS format which Mac OS X can Read but it can not Write to that format. So you would need to copy all the data off that drive, to either a Windows PC or to your Mac, thenn use the Mac to format it for the Mac OS. Which would be Mac Extended (Journaled) with a Partition Table of GUID.
If you want to use that drive on both Mac and PC then you would need to format it either FAT32 or exFAT. -
How do I export video files from iPhoto to a backup external hard drive for safekeeping?
How do I export video files from iPhoto to a backup external hard drive for safekeeping? Each time I try, the video will not play from the external hard drive.
Use the File ➙ Export ➙ File Export menu option with Kind = Original. That should get the original video file exported. Try to export one to the Desktop first and open it with Quicktime Player. If all goes well export the rest to a folder on the EHD. How is the EHD formatted? It should be OS X Extended (journaled).
-
Can I bring files from a NTFS formatted external hard drive (from Windows XP 32 bit desktop) to my new macbook pro retina?
What are these files you are trying to copy over?
If they are program specific and there is no program on a Mac to read them then you'll have to find either a Mac version of that program or one that does the same thing and can read those files.
The file extension should not change just because you connect a NTFS formatted drive to a Mac computer. A Word Document is still a .doc/.docx ad the same for all other office type programs. Music files with an extension of .MP3, or whatever, should read the same on both system. Same goes for all other files like images with a .JPG extension.
Yes I would network them.
I would not use Migration Assistant. There is nothing on your Windows PC that can be used on the Mac other than your personal data files. No programs or settings can be carried over from Windows to OS X.
marimbapony1 wrote:
Also, when I view the files from the external hard drive, they show up as .nbz and are not recognized by any program on the Mac. Should I just abandon the hard drive option and start sharing files through the LAN approach? -
How can I get Time Machine to back up an external hard drive (iPhotos) that is attached to airport extreme base station. Note: Time machine is usb to macbook pro and external drive with iphotos is usb to airport extreme base station. Help please. Thanks!
Once you have the drive connected to your Mac, click System Preferences (gear icon) on the dock
Click Time Machine
Click Options
Be default, the hard drive will be Excluded from backups. Click the drive to highlight it, then click the "-" (minus) button at the bottom of the list to remove the drive from Excluded items.
The drive will be backed up on the next Time Machine pass
Everything above assumes that the hard drive has been formatted in Mac OS Extended (Journaled) as Time Machine will only backup drives in that format. -
How to access a PC formatted external hard drive
I am trying to access a PC formatted external hard drive, however when I attempt to mount it I get a message saying the drive is not recongnized and if I want ti initialize, which i believe if I execute will remove the files I am trying access..Is there a way to access the files on the external hard drive...it is a avi file i need to edit..
http://www.macupdate.com/app/mac/26288/ntfs-for-mac-os-x
http://www.paragon-software.com/home/ntfs-mac/
Paragon also has a program (suite) that will convert NTFS <=> HFS+ without data loss (but have backup never use something wo one!)
And Pargon has kept up with Lion while others have not or have stopped development and works best with PC drive cases with low overhead and fast reliable copy operation.
The demo is also fully functional for 30 days. -
Can i recover photo files lost when i wiped out my hard-drive and reinstalled mac os x?
Can i recover photo files lost when i wiped out my hard-drive and reinstalled mac os x? I know that when a computer is wiped cleaned that the info is still on the hard drive, how do I access it? Can I pay someone to access it? Long story short, everything was saved to my external hard drive except my photos, by mistake of course.
You have to stop using the drive immediately. Completely stop. Do not boot the computer from the drive.
File recovery software: Try using an application such as Data Rescue 3 - http://www.prosofteng.com/products/data_rescue.php or FileSalvage - http://subrosasoft.com, or one of the ones listed in the (old) link below. Some have free trial versions that let you see if the software will help before you decide to buy. You will also need a second hard drive equal to or larger in size than your first drive as a destination drive for recovered files.
http://data-recovery-software-review.toptenreviews.com/mac-recovery-software
It is critical that you do not use the computer or even turn it on until you have rescued your files. Files only have the directory reference to them removed when you empty the trash or otherwise delete them from a computer (unless you use secure erase, in which case they are gone forever or can only be potentially be recovered by very expensive means) and are still present on the computer. However, their space is marked as available to any other file creation done on the computer (even done by you booting the computer) and there is risk that your files will be overwritten by the computer.
Even if the above works, do not expect the results to be pretty or even 100% successful. Files will often lose their names and you will have to re-name them one by one. -
I have a windows formatted external hard drive and a macbook pro. I was wondering if i could use the windows migration assistant to transfer files from my external hard drive to the mac
No.
Just connect the drive to your Mac. The Mac can read most Windows formats (it cannot WRITE Windows New Technology File System (NTFS) formatted drives.
Maybe you are looking for
-
SAP-DMS and NetWeaver Enterprise Search 7.2
Good day Experts, I will be thankful to you if anyone can help me with the following query. In SAP-DMS, we have got a reporting transaction CV04n which has got a facility to search for 'Text Search Within Original'. There is neat procedure if one wan
-
I have trouble with swing tutorial demos
I 'm trying swing tutorial. I already have downloaded the IconDemo in zip format. Compilation and execution are Ok but the application hasn't show anyimage. I have done with other appplication about Icon image, and it occur the same. Can anybody help
-
Import javax.jms cannot be resolved
This is error i am getting The import javax.jms cannot be resolved even though my class path contains mail.jar and activation.jar. please suggest me, to resolve above error Thanks in advance
-
Hi, Im studying Music Production and everyone keeps mentioning phase when recording. Im really unsure about what it is and what it does..... Someone said that it when the same signal is sent to the speaker and one tells the speaker to move back and f
-
Memory Leaks in CRPE32.dll of Crystal report 8.5
Post Author: Pugalendran P CA Forum: Crystal Reports Hi, On calling the PEOpenPrintEngine() API function of the Crystal report 8.5, the CRPE32.dll leaks memory of 2-3 kb. After printing 10000 reports approximately on a Server, the memory of the serve