How to recover ZFS pool after re-installation of Solaris10

I have two disks(c1t0d0-disk1, c1t1d0-disk2) and I installed Solaris 10(fresh installation) in a slice of disk1. On the other hand, I have ZFS filesystem in a slice of disk2.
I would like to restore old ZFS filesystem in disk2.
How do I recover old ZFS filesytem?
Thank you.

I think you meant "zpool import" instead of "zfs import".
See the zpool man page.

Similar Messages

How to recover purchased ringtones after wiping phone and laptop

How to recover purchased ringtones after wiping phone and laptop

From your computer backup.
Downloading (using iOS or computer) past purchases from the App Store, iBookstore, and iTunes Store - http://support.apple.com/kb/ht2519 - enabled with iTunes 10.3 and newer; not all media formats are available in all countries (see: iTunes in the Cloud, iTunes Match, and iTunes Radio availability by country - http://support.apple.com/kb/HT5085); apps, books (not audiobooks), music, t.v. shows, and movies (some - not all studios have permitted this). Downloading previously purchased movies and TV shows requires iTunes 10.6 or later. Discontinued items not available. For items not included in the iCloud list (e.g., ringtones, audiobooks), or locations or computer systems where iCloud is not (yet?) available, you only get one download per fee paid. Apple recommends, "... back up your iTunes library. " (http://support.apple.com/kb/ht2519).

How to recover apps purchased after macbook was re-registered to

How to recover apps purchased after macbook was given and re-registered to another family member/

Contact the App Store support and indicate to them your intent. They can tell you if your license to those applications will allow you to do so.

How to recover 10.6 after getting mangled by CoreAudio

hi- about two days ago i experienced a sever system crash- i was trying to install the CoreAudio drivers to use Virtual DJ and messed up most of OS X. i could boot properly but almost nothing worked, including iTunes, FInder, Chrome, Safari, and so on. i tried debugging for a while (deleting the drivers, reinstalling chrome, running disc utility, running onyx, so on) with no results so i reinstalled osx and that has brought be this far. at this point most of the system has recovered except for two (maybe three) things. one is that disc utility still shows inconsistencies in the permissions of many of my system files. it also fails to fix any of them. onyx does the same. also my internet protocols have been effected. chrome has become unusable to a cue- crashing pretty consistantly and demonstrating this unstability. safari doesnt even load my homepage without freezing, forcing me to force close it. skype is also very unstable, and firefox does not run either.
if anyone knows how to recover 10.6 after getting mangled by CoreAudio, please help. tnx.

Ignore the disk utility repair permissions. Stuff is always reported. Scan over this.
The fact that your internet related apps aren't working implies that you should look at your network system preferences. Are you using ethernet or wireless? Are you using default DNS servers or something like the OpenDNS servers (208.67.222.222, 208.67.220.220)? DHCP? Is there a green dot next to the connection type you are using?

How to recover my database after lose some archivelogs?

How to recover my database after lose some archivelogs?
What should I do next?
When I make a point-in-time recovery, I get the following message:
Oracle Error:
ORA-01547: warning: RECOVER succeeded but OPEN RESETLOGS would get error below
ORA-01152: file 1 was not restored from a sufficiently old backup
ORA-01110: data file 1: '/u01/app/oracle/oradata/rcatalog/system01.dbf'
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of recover command at 09/25/2008 16:41:19
RMAN-06053: unable to perform media recovery because of missing log
RMAN-06025: no backup of log thread 1 seq 17 lowscn 798237 found to restore
RMAN-06025: no backup of log thread 1 seq 16 lowscn 796977 found to restore
RMAN-06025: no backup of log thread 1 seq 15 lowscn 781378 found to restore
RMAN-06025: no backup of log thread 1 seq 14 lowscn 759019 found to restore
RMAN-06025: no backup of log thread 1 seq 13 lowscn 709039 found to restore
RMAN-06025: no backup of log thread 1 seq 12 lowscn 708479 found to restore
RMAN-06025: no backup of log thread 1 seq 11 lowscn 676234 found to restore
RMAN-06025: no backup of log thread 1 seq 10 lowscn 646686 found to restore
RMAN-06025: no backup of log thread 1 seq 9 lowscn 645207 found to restore
RMAN-06025: no backup of log thread 1 seq 8 lowscn 645199 found to restore
RMAN-06025: no backup of log thread 1 seq 7 lowscn 595363 found to restore
RMAN-06025: no backup of log thread 1 seq 6 lowscn 557197 found to restore
RMAN-06025: no backup of log thread 1 seq 5 lowscn 519102 found to restore
RMAN-06025: no backup of log thread 1 seq 4 lowscn 519053 found to restore
RMAN-06025: no backup of log thread 1 seq 3 lowscn 492824 found to restore
RMAN-06025: no backup of log thread 1 seq 2 lowscn 476888 found to restore

Mixing thread
yours recovery asking a lot of archivelog ,you are in the situation now like you are in no archive mode recovery..which requires last cold backup.
What you can do is restore yours old backup with its old controlfile and then recover till before that miissing log by using recover database using backup controlfile.
Khurram

How to recover my contacts after restore my iphone

how to recover my contacts after restore my iphone

Sync with new computer (new operating system)
https://discussions.apple.com/docs/DOC-3141

HT1391 how to recover itunes library after reformatting computer - has also wiped my ipod clean when I tried to transfer the music from there

Hi - I have reformatted my computer and want to know how to recover my tunes that were on itunes - I have tried to transfer the tunes from my ipod but it has wiped this clean too - any suggestions welcome!!

*If my kids dock up their iPods to charge them (the iPods still have the music on them) will the computer "sync" the iPod to the now empty library that's on the computer?*
If the iPods are set to update automatically you need to take care connecting to an empty iTunes. You can use a keyboard command to prevent an iPod auto-syncing with iTunes. While connecting the iPod to the computer on a Mac hold down the Option and Command (⌥ and ⌘ Apple) keys together. This will stop the iPod from auto-syncing with iTunes and it will appear in the source list. Wait until you are sure the iPod has mounted, and that it will not auto sync and then you can let the keys go. This may take between 20 to 30 seconds depending on your computer. You should then be able to change your settings: iTunes for Mac - Keyboard Shortcuts
Once the iPods are connected it might be a good idea to change them to manual updating at least until you have your library back in shape. The content of iTunes and the iPod are not syncronised in this mode so the two can be different, you can get details here:
Managing content manually on iPod
iPod - Syncing Music
Something else to be aware of when using an iPod in manual mode is that the "Do Not Disconnect" message will remain on the display until you physically eject the device: Safely Disconnect IPod

How to recover purchased apps after changing an Apple ID?

So I changed my apple id because my current email address is not working anymore on Yahoo. The next day when I checked for some updated on my apps, I found out that my deleted apps under "Not on this iPod" button are missing! And so I checked the store for my recent purchase and it has price. So it means I have to pay for them again to download! Anyone please help me how to recover them all!

Despite the fact that your old email doesn't work doesn't work anymore, the Apple ID still does. Log out and back in again with the old ID and downlload the apps. When finished, log out/in again to get back to your new ID.
These apps should sync to iTunes on your computer. If they do not, do the same log out/in in iTunes to retrieve the apps and store them on your computer.
The Sync function is totally independent of which ID was used to obtain the apps, music, movies, etc. The only time that you will care is when you need to update the app. If you choose to do it from iTunes, you must again log out/in to update. However, the iPod handles that for you and all you'll need is the correct password.

How Do I Add Partitions After Bootcamp Installation?

I want to have Windows 7 on my late 2013 Macbook Pro 13 to run applications not available on OSX. I need a small separate partition to store files for one of the applications that runs under Windows. On my older PC Windows machine I have C:\ that contains 98% of the data and a separate partition that acts as a separate drive (M:\) to store library files. This is a local copy of a server that I carry on my MBP, and doing this as I've done keeps the configuration files (that point to the server M:\) on my MBP consistent with desktop machines that actually point to a network shared drive (M:\). I just sync my small partition with the server every so often to keep my MBP functioning when I'm disconnected from the server. Now the problem. I can install Windows via bootcamp and that creates a C:\ (Windows partition) and gets Windows up and running. I have already learned the hard way about adjusting the partitions after bootcamp installation (I've rebuilt my Mac about 3 times ). I have been able to create the correct number of partitions by running the bootcamp assistant, creating the bootcamp partition, rebooting and <option> booting back to OSX, before installing Windows to add this 10GB partition (as FAT32) for my "M drive". Now after creating the "M drive" partition, I booted back into the Windows install disk (which has issues with USB drivers not functioning which I got past) and now I find out Windows will not install because it can't format the bootcamp partition since it will be a 5th primary partition and Windows 7 only supports 4 primary partitions on a drive. Is there a better way (without virtual OSs)?

Not possible. Boot Camp only works for two partitions - the OS X one and the Windows one. That's it. If you attempt to put a third partition on the drive, then Boot Camp is no longer able to manage the drive and you will lose the required boot loader for Windows. Getting things back to normal will then require repartitioning the drive back to one volume and reinstalling OS X from scratch.

How to recover the workflow after dead line is missed

Dear friends,
my work item missed requested end date as well as latest end date. I see it in
transaction SWI2_DEAD. Is there way how to recover the work item or prolonge
the dead lines?
Thanks for you help.
Regards,
Petr.

Hi Petr,
Could you please explain in a little more detail, what exactly you mean by "recover"?
Nothing actually happens to the work item, unless you have designed the workflow with modelled deadlines in such a way that it cancels the item and perform some or other action. Simple deadlines don't do anything to the work item, they just send out a notification and the work item remains where it is.
If on the other hand you have a modelled deadline which cancels the item and generates a new one, then there is no way to "recover" other than starting a new workflow.
Cheers,
Mike

HT201250 How to recover iPhoto Library after format of hard drive?

I've recently reinstalled Lion onto my hard drive but I forgot to backup my iPhoto library. Is there any way of recovering this library? I also have an external hard drive that had Time Machine Backups but that hard drive has since gone through formats as well. Any help will be greatly appreciated. Thank you

SOLUTION : iPhoto folder recovered after formatting hard drive by mistake.
I was able for recover my iPhoto library ( intact ) after formatting the hard drive by mistake.
On top of that I formatted it in FAT32 format. My iPhoto folder was huge 100GB with file and movies of all sort of formats. I kept it on a secondary hard drive of 500 GB. one day I was formatting flash drive for somebody which was 500Mb, seems similar to my 500GB and I formatted my hard drive by mistake. I realized the mistake a week after the person called me and said there is nothing in flash disk and I find a single file on my hard drive. Needless to say the earth disappeared underneath me. All my pictures for 10 years , 8000 thousand of them, cherished memories all gone. But was I determined to find them back and I know they are intact somewhere. My biggest fear was that formatting on MS-dos format might have really deleted them , but they were there. and here is how I got them back.
First I tried the Data recuse 3 software. I got the photos back, but they were all jumbled up. Long numerical file names and original dates were gone. No way I could sort it out back to the way it was before . So my target was to recover the iPhoto folder intact.
- I bought an external hard drive with 1tb space to retrieve the data.
- The software which did the miraculous job is called " STELLAR PHOENIX MAC DATA RECOVERY" .
- I ran a deep scan all night and came up with many volumes. volume-1 was the MS dos , volume 2 was a mac system,
- I tried MS dos volume first and there was nothing on it.
- I tried the 2 volume with mac system. It got all my files and some other system file.
- I could see the iPhoto folder and click on that only to recover. After that I went for my doc and other files later.
- It took hours to retrieve my iPhoto folder intact, The folder size was right and file were there in master folder.
- I checked in FINDER , opening iPhoto with "show content " and all my picture file were there with original date.
- BUT when tried opening it in iPhoto , there was nothing. it keep showing the wait icon and nothing shows up. Empty iPhoto.
- I tired starting iPhoto , holding command -option and tried building and repairing database, nothing worked.
- Then I got this software " iPhoto library manager" .
- downloaded, installed it and pointed it towards my iPhoto folder.
- It asked for space to rebuild a new iPhoto library with existing picture and folder.
I had another external hard drive , I used it to make a rebuild iPhoto library.
and there I GOT IT. only took three night of pain.
IMPORTANT:
I never touched my original formatted hard drive. Don't write anything on it until you are sure you have recovered everything. open and see files with your own eyes.
- I recovered the iPhoto on another hard drive and then built it on another hard drive . Yes its pain in the neck but well worth fixing your stupid mistake of not making a back up in the first place.
I hope this helps all who are looking for iPhoto recovery and their lovely memories.

How do I update Leopard after re installation - installation of update not working!

I have re installed Leopard due to issues with some software crashing. Now I'm trying to install the latest update which is approximately 700-800mb. The problem I'm having is once I have downloaded the latest updates and once I try to restart it the installation takes forever. Last night I left it on all night about 12 hours for it to install but when I checked the next morning it hadn't moved from it's previous spot from the night before and it was still at 'Configurating'. Does the update installation take this long or longer? Is there a problem? Should I try re installing Leopard again? It was running Leopard 10.5.8 and now after installation it has reverted to 10.5.4 but the updates just not installing properly. PLEASE HELP!

PantoneRed wrote:
Thanks so much. Do you guys get paid for this?
Glad you're back on track. As for getting paid, no, just users who want other computer users (in my case) to learn how to get the most out of their Macs and enjoy the experience.

Recovering NSS pool after server crash

Server crashed the other day - a SLES 11 sp1 XEN host server system with 3 VMs, 2 OES servers (SLES 10 sp3) NSS pools/partitions and 1 pure SLES 11 server. After the crash (due either to power reset or raid controller failure) I had to run fsck to clear up multiple, multiple error conditions on the SLES partitions in order for the servers to reboot. Once booted up, edir and of course NSS would not load. eDir has been recovered and is now running but one of these servers (the one with most all of the data on NSS) is unstable and still has some boot problems. Would the following be a viable option at this point:
1. Take this server out of the tree (if possible)
2. Install fresh, new OES server in a logical drive
3. Join the existing tree
4. Attach the NSS partition to this server
5. Bring up NSS
Any reason why this would not work to get to a stable server that can mount the existing NSS pool/partition? Thanks.
Don

That will work, assuming the new server does not have a volume/pool by the same name already.

How to recover audiobook bookmarks after upgrade to iOS 7?

I just upgraded my iPhone 5 to iOS 7 and here's one of the issues that this brought up:
I used to listen to audiobooks in the built-in Music app and the app would show the bookmarks or a time-code where I left off listening to my audiobooks and begin playing from that same spot even if I switched to listen to something else in the meantime. I'm concerned now because after this upgrade it doesn't show my bookmarks anymore.
How do I get them back?

Had you backed up the phone via iTunes or iCloud? If so, the backup includes audio book bookmark in the iCloud and you will be able to restore that backup to a replacement iPhone.
If you had been syncing your phone to back it up, you can use 3rd party software like iPhone Bookmark Recovery to try to recover some of your data from your backup. However, if your audio books are not fully included in the backup (they are only backed up as necessary to maintain call favorites and recent call lists). This article will show what's included in the backup: http://support.apple.com/kb/HT4946.

Please, how I recover the bufferlist after a cleanbuffer?

Hello.
Please, how we to recover the STMS list (the transport buffer list with their status column) after a buffer clean (cmd command tp cleanbuffer) ?
When we try to add a request already imported, these request appears in the buffer (STMS list) "ready for transport", but these request are already imported in the past.
Please, can you help us to re-create the tp buffer with the real status for the requests ?
Thanks in advance.
excepticons

Hello Vivek. Thanks for the reply.
We know find and view the transport logs for any request, via se01, se03, etc., and naturally, via os log files.
We need to have the old STMS queue before the "tp cleanbuffer" command, with the old status icons before the "tp cleanbuffer" command.
Example:
Old STMS queue:
Number Request     Owner    Short Text                                 St
   127 PPDK947557 COAROOS1 MM-INCLUSION CTA    (Icon for request already imported - green ok)
   128 PPDK947561 COAROOS1 MM-INCLUSION BXS    (Icon for request waiting to be imported - green box).
But, in the new STMS queue, if we add the request PPDK947557, the status icon will be "waiting to be imported", but the request was already imported a few days ago.
This queue with the old icons can be recreated from the OS transport logs, or can we restore from a backup?
Thanks.
Gustavo.

How to recover ZFS pool after re-installation of Solaris10

Similar Messages

Maybe you are looking for