How to recovery by created recovery disk by presing f11 it do nothing nd stop to work

Leptop g6

When booting from Recovery Disks do not tap F11. Instead tap the Esc key, then F9 to choose boot device. Select to boot from CD/DVD drive.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Similar Messages

I am unable to Install windows xp with recovery disks.

I have a Toshiba’s Satellite Pro S300-10J laptop Model#PSSB0E-02H00FDU. Some days back its operating system got corrupted. I have its recovery disks(windows Xp) and now I am trying to reinstall the windows by using recovery disks but unable to do so. Actually when I insert disk 1 it start installation process and then prompt for 2nd disk and when I insert 2nd disk it starts unpacking software image process. At the end it shows a pop up box with the following information.
Info:
                Done(Files:28339/28339 Folders: 2558/2558).
                Please remove the recovery medium!
                                                |OK|
As I remove the 2nd disk and press ok and then exit it goes shut down instead of rebooting. When I press power button to on it then it goes stuck on windows startup with a message of please wait .
Please support that how can I get rid of this situation and can restore operating system with recovery disk.

I made another attempt but nothing goes productive.
One thing is clear that the recovery disks are ok because a few months back I used same disks to refresh my notebook and did it without any error.
There might be a chance of bios setting because in my absence my sister and her friend tried to install windows and I doubt her friend made some changes in bios but she says that she didn’t made any change except boot priority and during installation got the error.
I have already rest the bios setting to default and in SATA CONTROLLER MODE I changed it from AHCI into IDE.
With recovery disks of XP Installation starts and after image loading it doesn’t restart just goes shut down and upon restarting just stop responding/hang up on startup.
I tried with another CD of XP and during installation when system restarts setup continues on ‘INSTALLING WINDOWS’ with the message that ‘Setup will complete in approximately 35 minutes ‘Installing devices’ and at this stage it hanged up. Finally it shows blue screen with an error like
Technical Information
STOP: 0X000000F4 (0X0000003,0X89936670,0X899367E4,0X805D1142)
Beginning dump of physical memory.
On several attempts the result remains same.
Need your valuable advice please..

Equium L10-300 recovery disk needed

ive had my laptop for 5mnths and i need to recover my toshiba laptop but the dealer, pc world in UK, i bought it from gave me a copy of the recovery disk and not the original but nothing is on it. so how can i download or obtain a Toshiba L10-300 recovery disk. or should i use my Windows Xp home edition disk and then install the necessary driver from Toshiba tools and utilities disk? please help or email me on [email protected]

Hello Mo,
Yes you can install Windows XP HE or Pro and then download all the drivers from Toshiba. But the place you bought the Computer from is supposed to furnish the Recovery CD's that came with the machine. If you go back and ask them they should be more then happy to oblige your request, since after all it is not your fault you do not have the CD's. Either way, for now if you want you could install windows normally and download the drivers, and wait for your recovery CD from the store, or you can go to the store, request your Recovery CD, and install it that way once they give you the CD's. Hope this clears up your problems.

Hp Pavillion Dv7 Recovery Disks

I really hope someone can help me out.
I have an old Hp Pavillion Dv7-1262 i bought in 2008. I had to restore it twice before and ordered the recovery disks from HP around 2010. The recovery disks come with Windows Vista Home Premium. They have worked perfectly before no matter the problem even when i bought a new hard drive.
Recently my laptop for some unknown reason stopped booting any software/operating system. Computer turns on but does not load Windows.
When i put the disks in Recovery Manager appears (does not give any other options other than loading the disk) but it stops almost half way through. The error message 1005 and does not let me put in the second disk out of the three.
Anyone know what it could be? Could it be the hard drive? or do the Recovery Disks need to be bought again? (there is no damage to them, have they run their expiration?)
If its the Hard Drive what kind should i get?
Thank you

Hi,
Please call HP technical support: 800-474-6836. If you live outside the US/Canada Region please click the link below to get the support number for your region.
http://www.hp.com/cgi-bin/hpsupport/index.pl
HP may charge you a small amount of money for P&H.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How to Continue Creating Recovery Disks after Updating Window 8.0 to 8.1

My laptop is hp 2000-2d62nr notebook pc (energy star) S/N: 5CG342027W
I might mess up the HP Recover Manager as follow:
I was attempting to create the recovery disks for the HP Window 8.0 laptop. HP Recovery Manager needed 5 disks. After 2 disks made done, I left my laptop for two hours. Then I returned to my laptop and saw Window to ask me to update Window 8.1. And I updated it to Window 8.1.
After Window 8.1 update done, the system had been restarted. When returning to HP Recovery manager, it asked me to continue the third recovery disks. I selected "Continue". However, Disk 3 verified failed at 15%, the pop up window asked me to use another disk and try again. I attempted second times by restart my laptop. again, Disk 3 verified failed at 2%,
How do I clean this mess and make a 2nd set of recovery disks?
Thank you for your suggestions.
Best Regards,
This question was solved.
View Solution.

I called the above phone number. Tech Support told me to charge $40.00 for recovery disks. I complained this and they transfered me to 877-917-4380 to talk with Case Manager. He agreed sending the recovery disks with no charge

How to create recovery disk on Win8 Pro notebook

hi
ive just rec'd my lenovo s430 running win8 pro
i'd like to create a recovery disk, 1 that restores the notebook back to factory default (lenovo bloatwares and all)
how can i do it? i cant find any info on the web.. plenty for win7 but none for win8.
thx~!
Solved!
Go to Solution.

syl801 wrote:
i actually want to create a recovery drive since ive got a few spare usb.
i've read this:
http://www.intowindows.com/how-to-create-windows-8-recovery-drive/
and it says the drive needs to be at least 256mb... isnt that a little too small for the whole Win8 recovery file?
If you read down in that link you reference, you'll see this: http://cloud.intowindows.com/wp-content/uploads/2012/07/Create-Windows-8-Recovery-Drive-Step9.jpg with a checkbox for "copy the contents of the recovery partition to the recovery drive".
That will include the Lenovo recovery image - or it's supposed to anyway. I can't test since I only have a 7 -> 8 updated machine at the moment. This only works correctly when used on a machine containing the original Lenovo Win 8 install.
256MB gets you the Win 8 recovery/repair tools but not the image. When the image is included it will take multiple GB. I'm told an 8G flash drive is required.
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

How to create recovery disk of OS X lion with Xcode 4

Dear All,
Can anyone tell me please how to create recovery disk for osx lion in case my OS crash . I want to create recovery disk please help me .
Regards
alfan

Dear ,
i am facing problem to upgrade my macbook pro 15 inch 10.6.3 to os x lion 10. 7 with recovery drive.
actually i m trying to install os x lion with the following method but could not install. i use 2 methods to install os please help me where im doing mistake.
1st method.
i make a recovery drive with recovery disk assistant on macbook air 13 inch which is shipped with lion 10.7 . and i connect my recovery drive with macbook pro 15 inch on which OS is snow leopard 10.6.3, for upgrade/install OS X lion on my macbook pro 15 inch by recovery drive.
when i hold down option key i can see my recovery drive . i can boot through my recovery drive but when i try to install os x lion the computer says
"you cant upgrade this version of mac os x "
2nd method
i made recovery drive on macbook pro 13 inch which is upgraded snow leopard to lion and then i try to upgrade my macbook pro 15 inch then the same problem i am facing
"you cant upgrade this version of mac os x "
Please help me
Regards
alfan

How do u creat BIOS recovery disk + nvidia firewall question.

WooooHOoOOO....
after re-formating a dozen times, busted SCSI config, messed up driver install, I FINALLY GOT this board working at 100%!!!
This mobo powered through my entire DOOM 3 Odyssey to Hell NON-STOP without a SINGLE CRASH!! Definitely a good testament to this board's quality.
Now for the final few noob question, how do I create a bios recovery disk just in case things happened.
lastly... how do you properly setup the NV Firewall? After enabling it, none of the other computers in my network can see this computer with the MSI Board, so file and printer sharing all stops when the firewall is enabled.
Anyone here has a walkthrough on the firewall?
ONCE AGAIN...thanks to all who helped me!!!

i havent got my nvidia firewall to work imma wait until they release better drivers for it but for creating the bios recovery disk i think if u use msi's live update it will ask u if u want to create one or not.

Satellite L - How to create a recovery disk?

Hey,
I deinstalled the Programm "Recovery Disc Creator" accidentally. But the Folder with the Win Vista Recovery Disc Informations are still in my Computer. Now i want you to help me in creating a Recovery Disc. My System is very unstable. So i want to re install it. I hope you can help me.

Sorry but why did you uninstall the recovery disk creator?
However, now you can’t create the recovery disk because you have uninstalled the program for creating the disk.
The only way I know is you use the HDD recovery option to reinstall your notebook. You can use this if you go to the advanced boot menu (F8 before Windows is booting), choose repair my computer and then select the Toshiba HDD recovery function.
Normally you get this message if you start your notebook at the first time:
+Important INFORMATION+
+your system is equipped with hard disk recovery system. if you need to repair+
+your computer by restoring it to original factory state, you can do it directly+
+from harddisk (press F8 when you boot your computer, choose "Repair your computer"+
+and follow the menue instructions) or create a bootable Recovery Disc Medium for this purpose.+
+Toshiba recommends you to create Recovery Disc Medium using the "Toshiba Recovery Disc Creator" to ensure+
+hat you are able to restore your computer to the original factory installed state, even if your computer+
+gets seriously damaged+

How to create recovery disks for Lenovo H530s with WIndows 8.1

Hello there,
I just purchased a Lenovo Hf30s type 10131 with Windows 8.1, mini tower: http://support.lenovo.com/us/en/products/desktops-and-all-in-ones/lenovo-h-series-desktops/lenovo-h5...
I like to create recovery disks, but the already installed program OneKey Recovery does not have the option of recovery disks, it allows only larger media such as USB stick and hard disks.
Here to I have 2 questions:
1. Is there a way to create a recovery disks that will create the original factory settings with 5 partitions?
2. Does any one knows if the recovery siskd sold by Lenovo (for Netherlands they cost between 23 and 38 Euro) would do the job by creating the factory settings with 5 partitions?
My goal is to reformat the hard disk and aprtitionig it the way I need it, but in case of anything, I would like to be able to go back to the original facttory state of the unit, especially if I have a harddisk failure and neer to replace the hard didks.
Thank you in advance and I wish you a very pleasant and successful day.

Hi Mlenovo,
Welcome to the Lenovo Community.
As per the query we understood that you are looking to create a recovery drive for your Lenovo h530s desktop.
As you have asked for the recovery disk, please refer to the below link this might help you to create the recovery media
Click here for the recovery media.
Hope this helps! Do post us back for further queries.
Best regards,
Ashwin.S
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

How to create recovery disk on HP envy dv6 7258nr notebook pc - window 8

I m trying to create recovery disk from recovery drive which is created by hp while purchasing the laptop, while taking back up from recovery manager, Recovery Manager says (Recovery Partition has been removed - Recovery Media creation option is no longer available) , but as per my knowledge i did not took back up of recovery drive. So what should i do to take back up of my recovery drive to **bleep**.

Based on what you have stated, it appears that you or someone else with access to your notebook deleted the recovery partition. Without the recovery partition on the hard disk you can't make recovery media.
Your best option at this point would be to purchase a recovery disk set from HP or an HP Partner.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

I recent la format the drive and create a case sensitive jornal and put a password. How I undo it if I just see the whole drive as the recovery disk

I want to format my computer and I start to do that but I fondo a copy of the boot folder on the drive, not the recovery drive. I formated and make it case sensitive jornal with a password. Then I put a password in main too. So the drive the entre drive become my recovery drive.So I have two recovery drive I think.I learn almost all the diskutil comando and I don know how to fin it. The disks are not showing the one with the passwords.

Hi Kappy,
Just wondering if you had any advice for my situation . . .
My time machine backup was backing up to a drive that was "Mac OS X Enteded Journaled, Case Sensitive." I had no idea what this meant, or that it would even cause issues.
I took my computer to the Apple store yesterday, and they wiped it clean. When they tried to restore it from the Time Machine backup drive, it would not work. Their guess is that Time Machine cannot restore from a drive that is "case sensitive."
Any thoughts on how I can convert my time machine backup data from a "case sensitive" state, to a "non-case sensitive" state? I've tried to just drag and drop the files from the case sensitive formatted drive to a new drive that I have that is formatted non case sensitive, but I get the following error message:
"The volume has the wrong case sensitivity for a backup"
I just really want my data back - I thought TimeMachine was the way to go (and was supposed to work) but unfortunately it is not.
Any help you can provide would be greatly appreciated.
Thanks,

How do i use the recovery disks and backup and restore my laptop in a new HDD without losing OS lic?

I am running a HP-DV6 6090ee laptop with windows 7 Home Premium 64bit OS. This problem started from last evening.
I am getting a "Smart Hard disc error" error message before boot and ater booting windows saying that my HDD is having problems and i need to backup and check the hdd.
After checking i found that i have a corrupted hdd and i am going to replace with a new one.
I need to know the following :
> How do i restore my windows license and my antivirus license in the new hdd?
> i dont currently have a OEM HP OS cd. can i use any windows 7 cd??
> at what stage should i use the recovery disk i created from the recovery partition be used? Whats its specific use?
I really appreciate any quick response as my current HDD is running out of life.
Regards
A

See these 2 Links...
Syncing to a New Computer...
https://discussions.apple.com/docs/DOC-3141
Recovering your iTunes library from your iPod or iOS device
https://discussions.apple.com/docs/DOC-3991

How do I format an external HD with Recovery Disk Assistant on?

Hi,
I have seen a couple of threads on this, but I'm still not "Compos Mentis" with how to format an external drive with the Recovery Disk Assistant on.
I have a 320GB which has my recovery disk assistant on - "Don't ask!" - Anyway it goes without saying that I want it all back, but I'll be damned if I can get there. I have managed to view (after a lot of faffing) what I thought was the External Drive, but now realise that it's not...this is what I am now seeing - are these removable via partition (disk0s1 & Recovery HD) as I have been merrily trying to erase them in he belief that they were the external HD and as far as I can see nothing has changed...only my annoyance!
Anyway in short, I need this
A) view the external drive and
B) Format it back to 320GB
Can anyone spoon feed me a way out?
Thanks

I don't understand what you mean by, "how to format an external drive with the Recovery Disk Assistant on."
You don't need to use the Recovery HD to format an external drive. Just use Disk Utility:
Drive Preparation
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
Steps 4-6 are optional but should be used on a drive that has never been formatted before, if the format type is not Mac OS Extended, if the partition scheme has been changed, or if a different operating system (not OS X) has been installed on the drive.

Cannot create recovery disk after update to Win 8.1 on G580

Friends
I have a Lenovo G580 that came with Win 8.0 preinstalled. I upgraded it to Win 8.1 over the Internet.
When I try to run the "Create recovery disk" I get the error that states that "We cannot create a recovery drive for this PC. Some required files are missing..."
I found out that the winre.wim file that is supposed to be in the C:\Windows\System32\Recovery folder is not there. I cannot locate it anywhere on the C or D drives either. I believe there is a copy on one or more of the recovery partitions but I do not know how to get that file from those partitons.
I am confused as to why there are seven partitions on that one drive:
1 Recovery partition 1000 MB
2 EFI system partition 260 MB
3 OEM partition 1000 MB
4. Recovery partition 350 MB
5. Recovery partition 20 GB
6. Lenovo D: 25 GB
7. Windows 8 C: 250 GB
Can someone help me and give me some instructions on how I can fix the system to find the winre.wim file?
Thanks for any good input.
Calle

Hi Calle,
Welcome to Lenovo Community Forums!
I’m sorry to hear that the error message is displayed in your G580 Laptop, as the OS (Operating System) installed is Windows 8.1 or Windows 8. Recovery discs cannot be created only a “Recovery Media” can be created using USB Flash drive, below is the link to create USB recovery drive.
Create a USB Recovery Drive
Do post us back if the issue persists.
Best Regards
Shiva Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

How to recovery by created recovery disk by presing f11 it do nothing nd stop to work

Similar Messages

Maybe you are looking for