How to recreate enterprise manager with database vault

I'm testing the Oracle database Vault option at database version 11.1.0.7 but there are some thing that does not work correct in the test. One of them is that I do not be able to recreate the enterprise manager repository. After probe several ways with database option enabled I decided to disable it. With the database vault option disabled I recreated the emanager ok but after enabled the database vault option again the database vault administrator does not browse for me:
The firefox notice me an error with resource /dva.
I hope you can help me.

when you have vault on do you get errors in the realm audit reports ?
or are you trying to create an oem repository in a vault enabled database ?

Similar Messages

How to configure Enterprise Manager in Active Data Guard?

Hi,
I have installed oracle 11g r2 rac with asm in two nodes. OS is hp-Unix.
I have installed oracle11g Active Data Guard using Single alone Database.
Both RAc and Active Data Guard works fine.
I have not configure Data Guard Broker.
Question: How to configure Enterprise Manager in Active Data Guard?
Thanks
Solaiman

http://www.gokhanatil.com/2012/04/manage-your-existing-data-guards-with.html

How to configure Enterprise Manager both node (2 node) RAC?

Hi,
I have installed oracle 11g r2 rac with asm in two nodes. OS is hp-Unix.
I have installed oracle11g Active Data Guard using Single alone Database.
Both RAc and Active Data Guard works fine.
I have not configure Data Guard Broker.
I have configure Enterprise Manager during RAC database installation.
When I start Enterprise Manager from node1 its address to node1
but when I start Enterprise Manager from node2 it also addressed to node1.
When both node is up and running, I can connect from Enterprise Manager.
When node2 is down but node1 is up then also I can connect from Enterprise Manager
but when node1 is down and node2 is up I can't connect from Enterprise Manager.
Question: How to configure Enterprise Manager so that I can connect through it whenever any single node is running?
Thanks
Solaiman

http://www.gokhanatil.com/2012/04/manage-your-existing-data-guards-with.html

Oracle Enterprise Manager 11g Database Control log file location

Any one knows where the log file is for Oracle Enterprise Manager 11g Database Control. I am trying to set up EUS proxy authentication and running into issues when trying to search proxy user in my DB. The search returns no results and I am not sure where to look for. Please not my setup does work for EUS with shared or exclusive schema. I need to use Oracle DB proxy authentication for my application and that would need a setup of EUS with proxy permissions so please advice if you know where the log file is for Oracle Enterprise Manager 11g Database Control or if there is any logging I can turn on to see what search parameters are passed from Oracle Enterprise Manager 11g Database Control to my DB by using DB audit etc.
Thanks,

Be patient...wait for report.
If after some time report does not appear, go to Advisor Central and find it there.
:p

Configure Enterprise Manager with multiple Listener

Configure Enterprise Manager with multiple Listener
I have created 2 listeners and connected my database with both the listeners. If I stop one listener then it automatically uses second listener vice versa. But facing problem in case of enterprise manager. If i stop first listener which is on 1521 port it is not connecting to another listener which is on 1522 port.
any help ?

Your potential problem is Enterprise Manager simply doesn't KNOW about that second listener. You can easily verify that when you look at the monitored targets.
Enterprise Manager also reconstructs automagically it's own tnsnames.ora! So, it doesn't connect to second -completely redundant and useless - listener, because the tnsnames.ora entry on the Management Sever is incorrect.
Simply because you didn't made sure OEM could discover the second -completely redundant and useless- listener.
I notice you apparently don't want to read documentation. Yet the only way to work successfully with Oracle, and to become independent, is to read that documention.
Apart from that you should be able to find agentca.bat on your OS with one command, so, yes, I pointed you to the documentation, yes, you can find agentca.bat.
Sybrand Bakker
Senior Oracle DBA

How to Link Solution manager with ECC?

Hi Friends,
i am new to solution manager. can any one help me how to link solution manager with other SAP servers like ECC, CRM, SRM? if anybody has paterial for the configuration can u send me, i will be very much thankful for that? my mail id is [email protected], [email protected]
thank you,
devendran.

hi Nick thanx for you reply. i was trying your way and the pop-up asking the System name, Product, Product version and the installation number. (is it the right screen which i am opening? if it is not then help me out).
my doubt is what to give in the system name. i had given ECC500 and it is not taking. is there any specific charater to enter i this field? if it is there then where we are maintaining it?
in the product field i entered SAP R/3 Enterprise and Product Version SAP R/3 Enterprise 47x200 from F4 option.
the next doubt is what is the Installation number and what to give in that.
Regards,
Devendran

How to access Enterprise manager from another computer

Hi There,
I have Oracle 10g installed on a PC. I can access EM from that PC.
I would like to know how would I access EM Dbconsole from another computer under same LAN.
Thanks
Raf

Opening the web browser, you can specify the hostname and the port configured to listen the incoming call.
For example:
https://hostname:port_number/em
or
https://ip_address:port_number/em
you can get information about the information that you need from the "emctl"
emctl status dbconsole
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2009 Oracle Corporation. All rights reserved.
https://hostname:1158/em/console/aboutApplication
Oracle Enterprise Manager 11g is not running.
Best regards !
Shin-Iti.

How to launch Enterprise Manager?

I am trying to launch the Enterprise Manager from my 10g:
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0
I've tried using all of the following ports and none is working. http://hostname:port/em
How can I tell the web server for the Enterprise Manger is running?
Most important of all, how to launch Enterprise Manger?
Thanks.
;OracleAS Components reserve the following ports at install time.
;As a post-installation step, you can reconfigure a component to use a different port.
;Those changes will not be visible in this file.
Ports
Oracle HTTP Server port = 80
Oracle HTTP Server Listen port = 7778
Oracle HTTP Server SSL port = 443
Oracle HTTP Server Listen (SSL) port = 4444
Java Object Cache port = 7000
Oracle Notification Server Request port = 6003
Oracle Notification Server Local port = 6101
Oracle Notification Server Remote port = 6200
ASG port = 7890
Oracle HTTP Server Diagnostic port = 7200
Log Loader port = 44000
Application Server Control RMI port = 18140
DCM Discovery port = 7100
Oracle Management Agent Port = 18120
Application Server Control port = 18100
Web Cache HTTP Listen port = 80
Web Cache HTTP Listen (SSL) port = 443
Web Cache Administration port = 9400
Web Cache Invalidation port = 9401
Web Cache Statistics port = 9402
Reports Services bridge port = 14011
Reports Services discoveryService port = 14021
Reports Services SQL*Net port = 1950

How can I tell the web server for the Enterprise Manger is running? emctl status dbconsole
TZ set to US/Pacific-New
Oracle Enterprise Manager 10g Database Control Release 10.2.0.1.0
Copyright (c) 1996, 2005 Oracle Corporation. All rights reserved.
http://bcm-laptop:1158/em/console/aboutApplication
Oracle Enterprise Manager 10g is not running.
Logs are generated in directory /u01/app/oracle/product/10.2.0/db_1/bcm-laptop_v102/sysman/log
Post Operating System (OS) name & version for DB server system.
Post results of
SELECT * from v$version
Most important of all, how to launch Enterprise Manger?emctl start dbconsole
Edited by: sb92075 on Jan 21, 2010 8:37 PM

Automatically starting Oracle Enterprise Manager with chkconfig

Folks,
While Oracle Linux 6 is out (6.2 actually), Oracle has yet to get everything 'working out of the box' with 6.2. Right now (June 2012) you've got to download patches from Oracle, the new way to start services in Linux 6, upstart, doesn't work with all Oracle features yet, etc. Update: You can still use chkconfig with OL6.
Because of the above, I've been using Oracle Linux 5.8. Linux 5 uses something called chkconfig to register services. You first need to put a script in the right directory: /etc/rc.d/init.d. Linux looks in this directory for scripts and runs those scripts with either a start or stop after them depending on if the system is coming up or going down. Technically this happens every time you change your runlevel (google Unix runlevels for more info), not just when the system goes up or down.
Here's a script that you can put in /etc/rc.d/init.d. I named mine oracleEM:
[root@localhost ~]# cd /etc/rc.d/init.d
[root@localhost init.d]# vi oracleEM
Enter i to enter insert mode and then enter the below (or just copy and paste it)
*#!/bin/sh*
*#chkconfig: 2345 80 05*
*#description: Oracle Enterprise Manager*
ORA_HOME=/u01/app/oracle/product/11.2.0/dbhome_1
ORA_OWNER=oracle
ORA_SID=orcl
*# We're checking to see if ps returns 1 or 2 results for pmon_orcl*
*# If there are two, Oracle is running, one we are just seeing our grep*
ORACLE_STATUS=$(ps -eaf | grep pmon_$ORA_SID | wc -l)
*if [ ! -f $ORA_HOME/bin/emctl ]*
then
echo "Enterprise Manager startup: cannot start"
exit
fi
case "$1" in
*"start")*
*if [ $ORACLE_STATUS -lt 2 ]*
then
echo "Waiting for Oracle instance $ORA_SID to start before starting Enterprise Manager"
fi
*while [ $ORACLE_STATUS -lt 2 ];do*
echo "Waiting...."
sleep 5
ORACLE_STATUS=$(ps -eaf | grep pmon_$ORA_SID | wc -l)
done
su - $ORA_OWNER -c "$ORA_HOME/bin/emctl start dbconsole"
*"stop")*
su - $ORA_OWNER -c "$ORA_HOME/bin/emctl stop dbconsole"
esac
Press the Esc key to leave insert mode, then type *:wq* to write the file and quit.
We'll need to make the script executable, so we need to run the following command:
[root@localhost init.d]# *chmod +x oracleEM*
Finally we need to register the oracleEM script with Linux using the chkconfig command:
[root@localhost init.d]# *chkconfig --add oracleEM*
Now Enterprise Manager will start up automatically when you start your system, but only after Oracle has started.
Rich
Edited by: RichS on Jun 9, 2012 1:00 AM

The script you are using will not work for RHEL or Oracle Linux since it is incorrect and missing important coding.
You can probably fix the script by removing the dash (-) from the su command and adding the lockfile that is required for RHEL to process the stop routine at system shutdown. The dash will reset the shell environment and the startup won't work. You should also start it in the background in order not to prolong the system startup more then necessary.
lockfile=/var/lock/subsys/oracleEM
start)
   su $ORA_OWNER -c "$ORA_HOME/bin/emctl start dbconsole &" &>/dev/null
   touch $lockfile
stop)
   su $ORA_OWNER -c "$ORA_HOME/bin/emctl stop dbconsole"
   rm -rf $lockfile
...You do not need to start your Oracle instance before starting dbconsole. So there is no need for the "sleep" routine. You can start the Oracle Database control console even when the instance is down:
For instance:
<pre>
[oracle@vm005 ~]$ ps -ef | grep pmon
oracle 17749 10343 0 22:48 pts/3 00:00:00 grep pmon
$ emctl start dbconsole
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2009 Oracle Corporation. All rights reserved.
https://vm005.example.com:1158/em/console/aboutApplication
Starting Oracle Enterprise Manager 11g Database Control ....... started.
</pre>

How to disable enterprise manager's security

Hi
I installed 11.2.0.1 Enterprise Edition on RHEL 5.6.2 64-bit. I cannot start the EM because of security issues. Repository and EMD are using https. How can I disable all security mechanisms? This will not be a production database!
Thanks in advance!

user10962462 wrote:
$ emctl secure status dbconsole
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2009 Oracle Corporation. All rights reserved.
Checking the security status of the DBCONSOLE... Done.
DBCONSOLE is secure at HTTPS Port 1158.
Checking the security status of the Agent... Done.
Agent is secure at HTTPS Port 3938.So, what I need is the following result: instead of DBCONSOLE is secure and Agent is secure i want to see DBCONSOLE is not secure and Agent is not secure.
Does anyone know how this can be done?http://download.oracle.com/docs/cd/B19306_01/em.102/b40002/security2.htm#i1025189

Oracle Enterprise Manager 10g Database Control Release 10.2.0.3.0

Oracle Enterprise Manager 10g Database Control Release 10.2.0.3.0 is one hour behiend on AIX 5.3.
I have installed the new timezone version 4 already by oracle DST path database is good OEM main page is showing one hour behiend.
I have done every possible effort last thing may be i have to update java home i have 1.4 IBM java on the server.
Please help me in this. Thanks.

See the Metalink Note *Impact Document for Daylight Saving Time Shift for Enterprise Manager Grid Control [ID 417939.1]* Appendix B - FAQ - point 18
What is the impact of not patching the JDK on the OMS for 10g Grid Control?
If you do not patch the JDK on the OMS page refreshed times and possibly other times displayed in the console will be incorrect (they will be off by 1 hour) during an affected period.
Oracle strongly recommends that you do patch the OMS JDK but we are not aware of any data corruption in the repository nor of any impact on critical EM functionalities (such as severities, notifications and jobs) when the JDK is not patched.

Grant role DBA with Database Vault

Hi all,
I need help granting the role DBA to a user with Database Vault option installed. I created a user account and I need that this user be able to do all the things that a regular DBA role can do. I can't find a way to do this in Database Vault... any help will be appreciated.
Thanks!

Sysdba can issue powerful statements such as create user, drop user, alter user, create profile .. and so on... can be done only if it is allowed so by modifying the Can maintain accounts/profiles rule set.
You can also login with dvsys account but that account is locked after installation. So unlock it with
alter user username account unlock; command. And be aware that ANY system privileges are blocked in protected schemas. You can try to grant the following roles in DB Vault := DV_OWNER, DV_REALM_OWNER, DV_REALM_RESOURCE, DV_ADMIN, DV_PUBLIC, DV_ACCTMGR, DV_SECANALYST
Following can help you
SELECT TABLE_NAME, OWNER, PRIVILEGE FROM DBA_TAB_PRIVS WHERE GRANTEE = 'DV_ACCTMGR';
SELECT PRIVILEGE FROM DBA_SYS_PRIVS WHERE GRANTEE = 'DV_ACCTMGR';
Regards
Karan

How to start Enterprise Manager Server on Linux

I install successful oracle 9i on redhat 7.2 Linux ,but I don't know how to start Enterprise Manager Server on Linux ,please help me ,thanks!

oemctrl start oms
oemctrl status oms sysman/oem_temp
oemctrl stop oms sysman/oem_temp

How to start Enterprise manager 10g Linux?

To,
Can some one please tell me
How to start Enterprise manager 10g on Linux RHEL 4.7
Thanks,

Hi
While runniing $ sh emctl start dbconsole getting error of Enveromment variable ORACLE_SID not Defined
Can you pls tell me Where do i fine env file to source the ENV file Enterprise manager 10g
Also do i need to run the *$ sh emctl start dbconsole* command from GUI of Linux.
Actualy follwoing is my exact stetup
I have installed Oracle EBS 11.5.10.2 on Linux EHEL 4.7
On the same Linux Box ( Where Oracle EBS 11.5.10.2 is installed ) Installed Oracle Application and Infra. server and Discoverer
Please guide me on the same.
Thanks,

How to configure Enterprise Manager Database Control (EMDC) to make it work on 2 servers working (primary and standby) under DG rules

Hello everybody i use Oracle Database EE 11.2.0.4 with DG.
In those cases i need to get Enterprise Manager Database Control running against DB with no RAC and no DG i perform the following steps:
I Logon SQLPLUS as user SYS or SYSTEM, and drop the sysman account and management objects:
DECLARE
CURSOR c1 IS
SELECT owner, synonym_name name
FROM dba_synonyms
WHERE table_owner = 'SYSMAN';
BEGIN
FOR r1 IN c1 LOOP
IF r1.owner = 'PUBLIC' THEN
EXECUTE IMMEDIATE 'DROP PUBLIC SYNONYM '||r1.name;
ELSE
EXECUTE IMMEDIATE 'DROP SYNONYM '||r1.owner||'.'||r1.name;
END IF;
END LOOP;
END;
DROP USER mgmt_view CASCADE;
DROP ROLE mgmt_user;
DROP USER sysman CASCADE;
After that i run
emca -config dbcontrol db -repos recreate
But what should i do in cases i have 2 servers working (primary and standby) under DG rules?

Hi ,
It is not possible to monitor/administer a Logical or Physical Standby database, i.e Data Guard, using Enterprise Manager Database Control. This is primarily due to the fact that Database Control is designed to monitor 1 database and a Data Guard environment, by definition, includes more than 1 database.
If you attempt to run emca against a standby Database, you will get an error like (i.e. ORA-01219: database not open).
Database Control, can, of course, be used to monitor the current Primary database (with no ability to administer or monitor Data Guard related functionality). In such a case, when failover occurs Database Control must be reconfigured to run on the new Primary database using the commands detailed in Note 278100.1 How To Drop, Create And Recreate DB Control In A 10g Database, section C. Recreate/ReConfig DB Control, Option 2. Recreate the DB Control Configuration Files and Repository.
Enterprise Manager Grid Control or Cloud Control provides the functionality for viewing, monitoring, and administering primary and standby databases in a Data Guard configuration.
Reference: Is it Possible to Configure Database Control for a Logical or Physical Standby Database? (Doc ID 315116.1)
You can use EM 12c cloud control to monitor and manager Standby DB effectively
Ref to below link for details
Set Up and Manage Oracle Data Guard using Oracle Enterprise Manager Cloud Control 12c
Regards,
Rahul

How to recreate enterprise manager with database vault

Similar Messages

Maybe you are looking for