How to recreate my recovery partition?

I was installing Windows using Parallels and not BootCamp.
The install failed and when I went to check my drive, my recovery partition was missing.
Should I just  re-download Maverick and do a re-install?
Or ids the e a better approach?
Thanks

Recovery Partition – Recreate Without Reinstalling
Recovery Partition – Recreate Without Reinstalling (Requires Installer)

Similar Messages

  • How to recover the recovery partition after delete all hard disk partitions

    hallo
    how to recover the recovery partition after delete all hard disk partitions in toshiba satellite pro c850-1fn ?
    note that : I did not work recovery disc or usb to my laptop.
    I have need of your help.

    Satellite Pro C850-1FN (PSCBXE-01700EEN)
    Restore the hard disk to its original out-of-the-box contents using Toshiba recovery media. All of the original partitions will be restored, including the recovery partition.
    If no recovery discs were created, you can obtain them from Toshiba.
       Toshiba Europe Backup Media Online Shop
    For instructions, see the section Restoring the pre-installed software from your created Recovery Media on p. 4-18 of the User's Manual (attached).
    -Jerry

  • How to install a recovery partition

    After installing 10.10.1 - 14B25 I no longer have a recovery partition.  The OS X 10.10.1 works fine but I am lost on how to add a recovery partition.  Some help on how to after the fact create an OS X 10.10 .1 recovery partition will be appreciated.   I failed to save the 10.10 installer

    BINGO....  I downloaded the full installer 5 GB and ran it over my 10.10.1 Macintosh HD with no Recover Partition.  Bingo, I now have my primary HD back with an updated 10.10.1 Recover Partition
    Kappy,
    I though your assessment was correct; however, it worked for me and I did NOT have to erase my Macintosh HD
    All is well again and it was a time consuming learning experience and I now have a 10.10.1 Recovery Partition

  • How to install a recovery partition after installing a new Hard drive? and FileVault help.

    Hi,
    I recently swapped out hard drives and when I did a Time Machine backup to the new drive, I noticed there was no Recovery HD partition for my drive. Is there a way to install it back on my MacBook Pro (Late 2011, running 10.7.4)?
    On a slighlty different topic FileVault won't let me encrypt my new HD it says "Some disk formats don’t support the recovery partition required by encryption. To use encryption, reinstall this version of Mac OS X on a reformatted disk."
    What formatting does my disk require for FV to be turned on? Currently it is Mac OS Extended (journaled)
    If there is a solution to solve both these issues, or any one issue it would be appreciated.

    The formatting being referred to is actually the presence of the Recovery Disk.
    You can't enable FV2 without a recovery partition being present. The reason is strictly logical: if your entire disk was encrypted, how could you run the unencryption procedure you need to start up? That would itself be hidden behind the encryption. Hence, for FV2 to be able to work, you must have a Recovery disk present.
    When you boot up with FV2 enabled, the login screen you see to enter your password is actually running from the recovery disk (invisible to the user). After you enter your password, recovery boots your encrypted partition and logs you in to your account.

  • How to put a recovery partition on the hard drive

    How can I create a recovery partition on the hard drive of my laptop. I had to reinstall the whole system, and tried to use the HP recovery software they sent me but it quit when it was about three quarters the way finished. I had to use a copy of windows 8 to put the system back on my laptop. After I got it all straighten out, I updated it to windows 8.1 and it seems like the computer runs a lot faster with windows 8.1 on it. Now I need to find away to install a recovery partition on my hard drive.
    Thank You
    Garry Crist

    When requesting assistance, please provide the complete model name and/or product number of the HP computer in question. HP/Compaq makes thousands of models of computers. Without this information it may be difficult or impossible to assist you in resolving your issue.
    The above requested information can be found on the bottom of the computer or inside the battery compartment. Please do not include the serial number. Please enter the model/product information into HP's Online Consumer Support page and/or post it here for our review.
    A Recover partition is something the factory places on the computer. It is an image of the factory installation and the software required to restore the computer to a factory like state using that image. You will not be able to create a Recovery partition on your computer unless you use the HP Recovery Discs to return the computer to a factory like state. Please note the HP Recovery Discs and the resulting HP Recovery partition will only contain an image of Windows 8 that cannot be updated to reflect the installation of Window 8.1.
    My suggestion is to use the Windows "System Image Backup" utility to create an exact image of the Windows 8.1 partition as it currently is. If your computer developes an issue or you need to replace the hard drive, all you have to do is "restore" the image to the computer. You will need to use an external USB hard drive or other media to store the image. Please see Windows 8.1 Tip: Use System Image Backup for instructions on creating and storing a "Windows - System Image Backup."
    If you have any further questions, please don't hesitate to ask.
    Please click the white KUDOS star to show your appreciation
    Frank
    {------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
    Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
    This is a user supported forum. I am a volunteer and I don't work for HP.
    HP 15t-j100 (on loan from HP)
    HP 13 Split x2 (on loan from HP)
    HP Slate8 Pro (on loan from HP)
    HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
    HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
    HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
    HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
    HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

  • How to boot service/recovery partition after a Windows 7 install

    Does anyone knows how to restore the boot feature of the service / recovery partition ?
    I did a Windows 7 RC install and it seems to have disable booting to the recovery partition. I can see that both the  SERVICEV003 and Lenovo partition are still there.
    Thanks.

    Hi all,
    it worked as described in the link i provided:
    sh-3.2# diskutil list
    /dev/disk0
       #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:      GUID_partition_scheme                        *500.1 GB   disk0
       1:                        EFI                         209.7 MB   disk0s1
       2:                  Apple_HFS Macintosh HD            499.2 GB   disk0s2
       3:                 Apple_Boot Recovery HD             650.0 MB   disk0s3
    /dev/disk1
       #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:      GUID_partition_scheme                        *2.0 GB     disk1
       1:       Microsoft Basic Data MYSD2GB                 2.0 GB     disk1s1
    sh-3.2#
    My Recovery HD is back and boots.
    Thank you very much for help.
    Regards, Peter

  • Recreate missing recovery partition

    After wiping my computer via partitioning from a USB installer, and reinstalling from the USB, I noticed when I tried to boot that there is no recovery partition.  Just OS X and Windows (bootcamp).  Is there a proprietary built in Apple way to recreate the recovery partiton?

    CCC Carbon Copy Cloner has a utility called "Disk Center" that is included with CCC that will create a Recovery Partition for you.  I understand that CCC is not free, but it does have a free 30 day trial. 
    I did use the musings.silvertooth.us utility to create a missing recovery partition successfully, but found (1) it hard to find the right version on that site and (2) I was somewhat uncomfortable running a low-level AppleScript install program style utility built by an unknown source on the internet.  Call my paranoid, but in the future I would prefer to either use CCC to avoid losing my recovery partition like I did with Super Duper (which I've loved for years until this missing recovery partition issue) or use CCC to create missing recovery partitions.
    The "Disk Center" in CCC Carbon Copy Cloner is not obvious and easy to find... it's easy to not know it's there.  But once you find it in the CCC menu system, it is seemingly obvious that it is a turnkey way to create a Recovery HD Partition.
    I just thought I would share, since I burned several hours of pain-staking research and experimentation on this.

  • How To Get My Recovery Partition as i got by default

    Product : HP dv7-4071nr
    OS : Windows 7 Home
    I had made Partition of My C Driver into 2 partition and My Recovery Partition is unaffected. Now I tried To install WIndows 8 Pro and its successfully installed.
    Now My Problem is My Recovery Drive (D is as usaual it shows Free and used Size of drive But when i click to show inside drive is Shows dirve is Emptly.
    Then after i Installed Windows 7 Home as its was come with factory. and register my windows 7 but still i am not getting Recovery drive as i got be default.
    Can You please help me ?
    How can i get recovery drive as default and recover to original Factory Installation ?

    When you first setup your computer, your should have created a set of Recovery Discs as recommended by HP. If your computer is still functional and the recovery partition (D: drive) is still intact, you can attempt to set to the "D:" drive as "Active" using the Windows Disk Management console and rebooting the computer. If you are lucky the HP Recovery Manager will boot and guide you through recovering your computer to a factory like state.
    If not, you will need to order a set of HP Recovery Discs from HP or third party vendor ComputerSurgeons.com
    Please send KUDOs
    Frank
    {------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
    Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
    This is a user supported forum. I am a volunteer and I don't work for HP.
    HP 15t-j100 (on loan from HP)
    HP 13 Split x2 (on loan from HP)
    HP Slate8 Pro (on loan from HP)
    HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
    HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
    HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
    HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
    HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

  • How to delete lion recovery partition

    i have mac book air 13inch with 128g hdd
    when i install lion, it creats lion recovery partition on my HDD
    and it does not clear out and stays all the time
    i want to delete the lion recovery partition and make my HDD united to only one partition
    how can i do this?
    it there any way to do this?
    help me~~~

    You could, but not recommended.  The recovery partition is
    there so that you can repair or re-install Lion if necessary.
    I don't recall, but I think some people have had issues with
    some Mac models booting Lion if a Recovery HD is not
    present.  Not sure if the Air is one.
    First, to be safe, you should probably make a USB stick
    installer or DVD for Lion should things go south on you and
    have to reinstall from scratch.
    Next,the simplest approach would be to clone your Lion
    install to an external, bootable hard drive using either
    Carbon Copy Cloner or Super Duper.  When that is
    complete boot to that volume then reformat the internal
    volume, then clone the external volume back.
    Don't interrupt any of the processes or you could
    end up with a MacBrick.

  • How to recover deleted "Recovery Partition"

    Ok so I apologize in advance if this story is a bit long, and horrifying (actually it's probably entertaining xD). I purchased the Lenovo y510p gaming laptop on back on July 14th 2014. I got the laptop, and it just didn't work for me. It didn't play the games I wanted it to, it had overheating issues, the keyboard had a really sharp edge making typing uncomfortable as well. After installing Sony Vegas and Avast, and just shifting some of my personal photos/music over, I made a backup of the laptop using the OneKey Recovery software. This backup was made to one of my 500GB external hard drives. So I then decided that I just didn't like the laptop, and it was time to return it. I called Newegg, and got my RMA all ready to go. Because I had lot of my personal files and programs, I decided the fastest way to delete everything would be to use the OneKey Recovery by Lenovo, and do a factory reset. At the time, I didn't think anything of this then simply putting the laptop back to exactly how I got it. I even booted it up after the factory reset, and it looked just like the first day I got it. Fast forward 2 weeks, and my RMA is denied from Newegg:   Your RMA (RMA Number: 60470880) return was received and sent to our Inspections Department for closer examination. 34-313-740 NB LENOVO IDEAPAD Y510P 59406636 RTSystem has been modified/altered original manufacturers operating system has been removed cannot access restore partition, this voids Newegg warranty. Unit cannot be accepted or resold as received.  So I was completely shocked as to how I had managed to delete the recovery partition, I didn't modify the OS in anyway, and I phoned Newegg to check what was going on. They confirmed that the tech people at the returns department could not reset the laptop properly, because the recovery partition had been deleted. So, the laptop is being shipped back to me this week, and my question was what on earth could I do to recover this "deleted recovery partition?"  If the OneKey Recovery still works, I don't see why it woudn't, then I can restore the backup that I made on my external hard drive from Day 1. That should bring back this alleged "recovery partition" that's been causing all hell to break loose lol. If however, I can't access that OneKey Recovery, I believe I'm in a huge pile of trouble. Newegg said that if I can manage to recovery that lost "recovery partition" then they will honor my RMA and refund my money.  At this point in time, I'm trying to salvage my situation, and think and act quickly as Newegg does have a 30day only return policy. I didn't do much with the laptop when I had it other than test a few games, so I honestly have NO IDEA how I could've deleted the recovery partition. But I'm not thinking of that anymore, and thinking ahead as to how I can recovery this deleted "recovery partition." Thanks for reading this horror story, and I really appreciate any responses.   

    Man I am overwhelmed by the amount of thoughtful and informative responses I'm receiving, thanks so much guys. @Rocky- They are shipping the laptop back to me this week, I should have it by Friday. The first thing I'll do is go into Disk management to see if the recovery drives are there. Tbh, I doubt Newegg would purposely rip me off, so I'm expecting the drives to be missing. If they're not however, I'm taking pictures and probably dancing because I'll be so happy haha. If the drives are NOT there, I'll see if I can load up OneKey Recovery, and restore my backup, and go from there. Also yes I'm sure I bought it from Newegg, no third parties. @neok- That's exactly what I was thinking! I did the OneKey Recovery, then packed the laptop up and sent it for shipping. Then I get a RMA denied and I was completely shocked. That made me wonder if you could only do the OneKey Recovery once maybe, but I contacted Lenovo and they gave me a letter, written, saying what the OneKey software does. I then forwarded this email to the supervisor at Newegg, but she told me that the fact of the matter is that the "recovery partition" is not accesible anymore, and they're not honoring my RMA unless I retreive it. They were very adament about this. Also thanks for those links, I did a few Google searches myself and those are generally what I found. The reoccuring theme in those cases seems to be people resizing their partitions. I did not do that, simply played a few games, didn't like the laptop, did a factory reest, and boom. That's all I did. If I'm unable to use OneKey Recovery when I get the laptop back this upcoming Friday, I'll consult with those links. Thanks! @Zoltan- Yeah honestly I want to be furious with Newegg, but then seeing as they're really quite strong on their grounds that I somehow deleted it, I'm trying to think back to what I did. However, I find it hard to believe that I would delete the recovery partition, even accidently, because I only had the laptop for a day, and all I was really doing was transferring my photos/music, and installing a few programs. My desperate last attempt to salvage my money will be calling Lenovo and requesting the recovery media, even if it costs $60 or up. The only problem with this is that they might take a while to ship the disc. I only have until around August 14th before Newegg's 30day return policy kicks in, although I spoke with the Newegg supervisor, and she granted me 1-2 days of grace. I could order the CD right now, before I even get the laptop shipped to me, but that's risky seeing as I might not need it at all, if I can still access the OneKey Recovery. The more I think about it though, if I explain my entire situation to Lenovo, they might send me a free CD which I could then order right now, saving me a few days, and serving as more of a precaution then anything. Thanks so much for the replies guys, last Friday was the most stressful day of my life, this RMA was denied, and then I thought about it all day at work. I think I could've been more aggressive with Newegg, but I have no real legal documentation to show them. I mean yes even if I did delete the recovery partition, which I didn't, but let's suppose I did. Deleting software is still not any means for flat out rejecting an RMA, and refusing to refund $1300. I just wish I had some sort of legal document to refer Newegg over to . 

  • How to creat a recovery partition

    i mistakely delecte my recovery partition without creating a recovery disc and right now i want to retore system to factory setting. Can any one help me on how to creat recovery partion or if downloadable how can i download it or any solution on to recover my system back to its original factory settings.

    Hi,
    There is no download of the Recovery Partition available, however this partition will be re-created when you reinstall the OS using Recovery Discs.
    As you don't have these, you can order a replacement set of Recovery Discs using the link below.
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00810334&cc=us&lc=en&dlc=en
    If you have any problem with this link, order them directly from HP.
    If you live in the US, contact HP Here.
    If you are in another part of the world, start Here.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • How to build a recovery partition for mavericks?

    How do I create a recovery partition or disk for Mavericks?

    Suggestions for the capacity of a USB flash memory stick are in the 8GB+ range.
    Methods of how to create bootable OS X 10.9.x system on a USB flash vary a little...
    results of search: https://www.google.com/#q=Mac+OS+X+Mavericks+USB+key
    This one suggests get third-party utility to help do it [ http://diskmakerx.com/ ]
    and tells of a way without it, by use of Terminal utility in the OS X:
    http://arstechnica.com/apple/2013/10/how-to-make-your-own-bootable-os-x-10-9-mav ericks-usb-install-drive/
    http://www.macworld.com/article/2056561/how-to-make-a-bootable-mavericks-install -drive.html
    http://lifehacker.com/how-to-create-an-os-x-mavericks-usb-installation-drive-145 0280026
    So there are a few ways that fairly much have you go the same direction.
    Good luck & happy computing!

  • Recreate deleted recovery partition in Lion

    My iMac (27-inch, Mid 2011) came with Lion installed. I deleted the recovery partition when I triple booted with Windows 7, Ubuntu and Mac OS.
    Is there any way to re-create a deleted recovery partition in Lion? I've read that you can download Lion from the App Store & write it to a USB using the Disk Utility.
    I am currently dual booting with Mac OS X Lion (10.7.4) and Windows 7 (installed via Boot Camp).
    Please give step-by-step instructions if possible.

    Actually, have you tried the Internet Recovery Firmware mentions in the article I sent you before?
    If you have a newer Mac system, then as long as you have the latest firmware updates installed you should be able to use Apple's Internet Recovery feature and can bypass the need for a local Recovery HD partition. Apple recently released new EFI firmwareupdates for mid-2010 MacBook and Mac Mini systems that enable Internet Recovery, but there are also updates available for newer 2011 Mac models that do the same thing. With the Internet Recovery enabled in the Mac's firmware, to use it you just need to restart with the Command-R keys held down. If there is no local Recovery HD partition available, then the system will ask you to join a network. You will need a Wi-Fi connection available that is secured with a WPA or WPA2 password (other forms of connection such as WEP and certificate-based authentication will not work), and then the system will download and boot from a recovery image file obtained from Apple's servers.

  • How to recover deleted recovery partition for HP Pavilion TS Sleekbook 14-b145 tx window 8

    Hi, Please kindly help me!!!! I have accidentally click on "remove recovery partition" from hp recovery manager and i did not save a copy to usb....Am i able to restore or recover the recovery partition???? My notebook is HP Pavilion TS Sleekbook 14-b145 tx window 8.. Since i accidentally delete the recovery partition.....i am not able to reset my pc i.e reset all drive and files from system recovery. Please help me to solve the problem....because i need to use the notebook asap. Thanks a lot for your help

     Contact HP Support to order Recovery Media. If you live in the US/CA, contact HP info Here. If you live in another part of the world, start here>>Contact HP 

  • How to recover deleted recovery partition for HP Pavilion TS Sleekbook 14-b145 tx

    Hi, Please kindly help me!!!! I have accidentally click on "remove recovery partition" from hp recovery manager and i did not save a copy to usb....Am i able to restore or recover the recovery partition???? My notebook is HP Pavilion TS Sleekbook 14-b145 tx window 8.. Since i accidentally delete the recovery partition.....i am not able to reset my pc i.e reset all drive and files from system recovery. Please help me to solve the problem....because i need to use the notebook asap. Thanks a lot for your help   

     Contact HP Support to order Recovery Media. If you live in the US/CA, contact HP info Here. If you live in another part of the world, start here>>Contact HP 

Maybe you are looking for

  • How can I re-display the header of table on next pages (report designer)

    In the report designer, I insert a data provider. The fist line is the field name. When I browse the report, the field name line can't display on the second page, only on the first page. How can I do to display it on next pages? Thanks Eva

  • Error during creation of  Planning Version in SAP - ICH

    Hi All, I'm working on SAP-ICH, in that i tried to create planning version after creating the planning model but the system is giving information " General error in model/planning version management " . Could you please tell me the reason why this is

  • How to end multiple EOIO messages in SXMB_MONI ?

    Hi All, in transaction SXMB_MONI i can only see the first of multiple erroneous messages of quality type EOIO. Therefore it is only possible to end the first one and then wait for the next to come in and cause an error. It is possible to end all of t

  • Web Services with table element dont work

    I, am trying to use a web service that returns a xml with code and description. When i test the web service it works fine but when i use it in a page doesnt work at all. There is no parameters to call and the response is: <?xml version="1.0" encoding

  • A/c modifier@a/c key def

    hi, pls make me know abt a/c modifier@a/c key def in fi&sd integration regards jana