How to redirect the output display on Ultra 5 box.

Hello,
Good day to you.
I have issues with redirecting display output to my console server (which is configured with cyclades switch) on a newly installed solaris 10, Ultra 5 box.
I could access the output display on the monitor when I connect it directly to the serial port. But I also have my parallel port connected to cyclades switch which is primarily being used for accessing multiple servers thro' one single console server.
When I try to access my ultra 5 box thro' console server, the display not getting redirected over there..I did checked the port from cyclades switch front, it did work well with other machines.
Looks like some work needs to be done at Ultra 5 box level so that the parallel port can send output signals to the respective port on cyclades switch and consequently to the console server.
Any thoughts ??
Thanks.

Hi,
Good day to you.
Apologize for quoting "Parallel" port. It is a in-built 25pin serial connector placed next to regular 15 pin serial port.
Just to make a point here, this 25 pin serial connector has an external converter attached with other side having RJ45 jack.
CAT5 cable connected between switch port to this RJ45 jack.
I did tested this converter with another machine and could able to access the display on my console server. So it seems to be the connectivity from serial port to switch port works fine.
Adding to that, this ultra 5 box with the current connectivity set up was working fine until I rebuild this machine. I was very well accessing this box thro my console server. There was no changes done except rebuilding the operating system.
I think some work needs to be done at the ultra 5 box level to get this 25pin serial connector to act.
Thanks.

Similar Messages

Re: how to redirect the output from studio to a file

the thing is i have large amount of output(crapy uni project), it's kind of hard to read them in IDE output window, and i am too lazy to use fwrite to a file. in terminal it's just "output > filename", but doesn't work in IDE. anyone knows?

The Arguments property will take a "> file".
This property can be set in several places.
In studio 10/11:
- Debug->LoadProgram
- Debug->LoadRecent->EditLoadCommandList
After you've loaded a program...
- Debug->DbxConfigure
In studio 12:
Project (ctx menu)->Properties->Running(Category)

How to redirect CELLCLI output to text file

Hi,
I would like to redicrect the output of the cellcli command to a text file .
For example , how to redirect the output of this command to a text file on /tmp
CellCLI> list metrichistory where objectType = 'CELL' -
and name = 'CL_TEMP'Thanks

cellcli has spooling capabilities similar to sqlplus:
CellCLI> help spool
Usage: SPO[OL] [<filename> [ CRE[ATE] | REP[LACE] | APP[END]] | OFF ]
Purpose: SPOOL <filename>: Direct the results to the file <filename>.
           SPOOL OFF: Turn off the spooling.
           SPOOL: Check the current spooling status.
Arguments:
    <filename>: The filename where the results will be output.
Options:
    [APPEND]: If the filename already exists, the following output will
              be appended to the file. Without this option, the existing file
              contents will be replaced.
    [CREATE]: If the filename already exists, an error is reported.
    [REPLACE]: If the filename already exists, the contents will be
              replaced. This is the default, when no option is provided.
Examples:
    spool myfile
    spool myfile append
    spool off
    spoolBut if you are trying to script it, it would be easier to just run it command line:
# cellcli -e "list metrichistory where objectType = 'CELL' and name = 'CL_TEMP'" > /tmp/CL_TEMP.txtAlso look into dcli which allows you to run cellcli commands on one or more cells from a compute node.
Good luck.

Redirect the output of SQL*Plus to the file

Hi all,
I have the following command to run:
sqlplus username/password @myfile.sql
I don't know how to redirect the output to the file.
Also in the script myfile.sql I have the defined variable, &VP and
How can I substitute this variable(&VP) at the run time.
Thanks,
JP

Assumed you like to replace your defined variable VP by number 4. SInce it is posintional parameter,instead of wrinting &VP, write
VP:=&1
sqlplus>spool redirect.txt
sqlplus>@myfile.sql 4
sqlplus>spool off

How to redirect console output while starting server from within IDE

Hello, i am using Weblogic Workshop IDE. When I start the server, a new cmd shell is launched and the jvm output is displayed in this cmd shell window. How can I redirect this output to show up within the IDE (for instance in the Console view)?
Problem is that when an error occurs, the cmd window disappears and I cannot tell what the error was.
Surely there is a way to do this as other IDEs (JBuilder, Rational etc.) allow this.
Thanks:
-Sam

Hi Sam,
Unfortunately, this feature does not exist in Workshop 9.2
Regarding your question about redirecting the output, the logs are saved under the domain directory.
You could also refer to the following section for additional info on redirecting the output to multiple destinations.
http://e-docs.bea.com/wls/docs90/ConsoleHelp/taskhelp/logging/RedirectJVMOutput.html
Hope this helps.
cheers
Raj

IS IT POSSIBLE TO REDIRECT THE OUTPUT TO ANOTHER PAGE?

Hi all,
Is it possible to redirect the output when I excute my query in iSQL*plus to another predifined html page?
If yes how do I do this?
Thanks a mill

You could do this..just read on..
It would generate a html page for you...and..so on..!
In addition to plain text output, the SQL*Plus command-line interface enables you to generate either a complete web page, or HTML output which can be embedded in a web page. You can use SQLPLUS -MARKUP "HTML ON" or SET MARKUP HTML ON SPOOL ON to produce complete HTML pages automatically encapsulated with <HTML> and <BODY> tags.
By default, data retrieved with MARKUP HTML ON is output in HTML, though you can optionally direct output to the HTML <PRE> tag so that it displays in a web browser exactly as it appears in SQL*Plus. See the SQLPLUS MARKUP Options and the SET MARKUP command for more information about these commands.
SQLPLUS -MARKUP "HTML ON" is useful when embedding SQL*Plus in program scripts. On starting, it outputs the HTML and BODY tags before executing any commands. All subsequent output is in HTML until SQL*Plus terminates.
The -SILENT and -RESTRICT command-line options may be effectively used with -MARKUP to suppress the display of SQL*Plus prompt and banner information, and to restrict the use of some commands.
SET MARKUP HTML ON SPOOL ON generates an HTML page for each subsequently spooled file. The HTML tags in a spool file are closed when SPOOL OFF is executed or SQL*Plus exits.
You can use SET MARKUP HTML ON SPOOL OFF to generate HTML output suitable for embedding in an existing web page. HTML output generated this way has no <HTML> or <BODY> tags.

How to fetch the data & display the data if fields got the same name in alv

hi frnds, i need ur help.
how to fetch the data & display the data if fields got the same name in alv grid format.
thanks in advance,
Regards,
mahesh
9321043028

Refer the url :
http://abapexpert.blogspot.com/2007/07/sap-list-viewer-alv.html
Go thru the guide for OOPs based ALV.
Use SET_TABLE_FOR_FIRST_DISPLAY to display the table:
CALL METHOD grid->set_table_for_first_display
EXPORTING
I_STRUCTURE_NAME = 'SFLIGHT' Structure data
CHANGING
IT_OUTTAB = gt_sflight. Output table
You can also implement
Full Screen ALV, its quite easy. Just pass the output table to FM REUSE_ALV_GRID_DISPLAY.
For controlling and implementing the FS-ALV we have to concentrate on few of the components as follows :
1. Selection of data.
2. Prepare Layout of display list.
3. Event handling.
4. Export all the prepared data to REUSE_ALV_GRID_DISPLAY.
Regd,
Vishal

How to download the output of two reports in WebTemplate into excel sheet?

How to download the output of webtemplate which consists of two reports in one Web Template into same Excel sheet?

hi sunil,
here is the HTML code for 'export to excel'

<td class="SAPBEXNavLine"> <SAP_BW_TEXT program="SAPLRRSV" key="T72">" src="Mime/BEx/Icons/S_X_XLS.gif" border=0 ></td>
you can also use BEx download scheduler to download the precalculated webtemplate report to excel sheet.
Check the link below.
https://websmp104.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700000401962004E
i think this will help u
regards,
sindhu.

How to print the output of the screen in Dialog Programming

Hi,
Could anybody help how to print the output of a screen in the dialog programming. i can select 'Hard Copy' option in the 'Custumizing of Local Layout' Icon in the standard tool bar. but that prints the whole screen with the toolbar. i want to print only the output which is displayed on the screen. Please help..
Regards,
Swathi

Hi Swathi,
Ok. Do One thing. Go to menu bar and select Systems -> Own pool Request -> here you get the spool number. Select it and select the option "Print Directly" in tool bar.
Thanks.

How to store the output of a analog to digital converter into an 2D array

Hi
I am doing my M.Tech Thesis in Image reconstruction and I am using labview for simulation and I want to know how to store the output of a analog to digital converter into an 2D labview array.

nitinkajay wrote:
I want to know how to store the output of a analog to digital converter into an 2D labview array.
How exactly are you performing 'Analog to Digital'???
Grabbing image using camera OR performing data acquisition using DAQ card OR some other way????
I am not allergic to Kudos, in fact I love Kudos.
Make your LabVIEW experience more CONVENIENT.

How to download the output of a report along with column header

Hi,
Could someone please tell me on how to download the output of a report along with column header to .txt format. A download option needs to be given to the user using physical and logical file names .The report basically contains header details and item details and requirement is to download the same format into an .txt format.

Hello,
Try this FM:
Data: being of itab occurs 0,
matnr like mara-matnr,
maktx like makt-maktx,
end of itab.
data:begin of fld_tab occurs 0,
fld_name(20),
end of fld_tab.
fld_tab = 'Material'.
append fld_tab.
fld_tab = 'Material Desc'.
append fld_tab.
CALL FUNCTION 'WS_DOWNLOAD'
   EXPORTING
        BIN_FILESIZE            = ' '
        CODEPAGE                = ' '
         FILENAME                = 'C:\1.txt '
         FILETYPE                = 'DAT'
        MODE                    = ' '
        WK1_N_FORMAT            = ' '
        WK1_N_SIZE              = ' '
        WK1_T_FORMAT            = ' '
        WK1_T_SIZE              = ' '
        COL_SELECT              = ' '
        COL_SELECTMASK          = ' '
        NO_AUTH_CHECK           = ' '
   IMPORTING
        FILELENGTH              =
     TABLES
          DATA_TAB                = itab
          FIELDNAMES              = fld_tab
   EXCEPTIONS
        FILE_OPEN_ERROR         = 1
        FILE_WRITE_ERROR        = 2
        INVALID_FILESIZE        = 3
        INVALID_TYPE            = 4
        NO_BATCH                = 5
        UNKNOWN_ERROR           = 6
        INVALID_TABLE_WIDTH     = 7
        GUI_REFUSE_FILETRANSFER = 8
        CUSTOMER_ERROR          = 9
        OTHERS                  = 10
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Regards,
Naimesh

How to use the second display for installation OS in my vertical lines iMac

My 17" iMac display is full of vertical lines, it is unuseable. Does anyone know how to use the second display for Mac OS X or disable the first display for installation Mac OS x ?

Go to: *System Preferences > Displays* and select the Arrangement tab, then relocate your Menu bar by dragging it to the other display.
Unfortunately there is no Hardware or Software switch to turn off the iMac's Internal Display.

How to use the Output clause for the updated statment

How to use the output clause for the below update stament,
DECLARE @MyTableVar table(
sname int NOT NULL)
update A set stat ='USED'
from (select top 1 * from #A
where stat='AVAILABLE' order by sno)A
Output inserted.sname
INTO @MyTableVar;
SELECT sname
FROM @MyTableVar;
Here am getting one error incorrect syntax near Output
i want to return the updated value from output clause

see
http://blogs.msdn.com/b/sqltips/archive/2005/06/13/output-clause.aspx
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My Wiki User Page
My MSDN Page
My Personal Blog
My Facebook Page

How to change the output as text format in Apps R12.1.3

Hi All,
Currently iam trying to modify the Java Concurrent Program (FDExtractAndFormatting) in Batch Payment Process. This Program is generated in text format in 11i APPS. Now we are upgrading to R12.1.3. In R12.1.3 output is coming as PDF format. Here my requirement is how to change the output as text format in R12.1.3 also.
Please do the needful and suggest me.
Regards,
Jagadeesh

1. It is seeded java concurrent program. Some attributes are missing from 11i to R12. In 11i it is a text format.So i have to investgate on how to retrive those attributes in R12. What is the concurrent program name?
Have you tried to change the output and submit the request?
2. Once all are attributes are coming in PDF format. Client wants to open same output in text format as it is 11i (In R12 it is generated in PDF format).If the above does not help, please log a SR.
Thanks,
Hussein

How to send the output to PDF format in reports 6i?

Hi,
How to send the output to PDF format in reports 6i? I given Mode = BITMAP.
DESTYPE = File, DESFORMAT = PDF, DESNAME = C:\x.pdf.
Report is running fine. But PDF file not generated. I don't know what i missed. Any one can help this?
Thanks
Kavitha

Hello,
Do you get this problem only for DESFORMAT=PDF ?
Test with :
DESFORMAT = RTF, DESNAME = C:\x.rtf
or
DESFORMAT = HTMLCSS, DESNAME = C:\x.html
does it work ?
Check if DESNAME is modified in the reports itself.
Regards

How to redirect the output display on Ultra 5 box.

Similar Messages

Maybe you are looking for