How To Redirect to a domain and lock a domain?
Hi, if anyone can help me to make a target a URL using AS2 for example when anyone try to open my swf rather then the domain i selected another domain will open by it self and also if anyone try to decompile it will connect to the target URL... have any idea ? for example in flash secure optimizer they have domain lock also redirect to a domain but what i want is to do that with action script.. can any one help me out :?
I'm a little confused by your question. When you add an 'Accepted Domain' your saying for you Org. "I want to accept email for this domain.". What this means is, your accepted domain needs to still be a valid, real domain. Is this domain a sub/
child domain of your root? If this domain you added does not exist, obviously, you cannot create a new mailbox for this domain. I think what you want would be if you had a child domain setup in your Org. and you created a mailbox within that domain.
Similar Messages
-
I am connecting my new iMac to my Buffalo router. I forgot my router password so I pushed the reset button and my computer was able to connect. The problem is, I can't figure out how to set my new password and lock the router. I went to the Buffalo website and downloaded the CD, as I can't find that either. I can't open any of it because it says it is Windows and can't open it. I am new to Apple!
kellyfromdanville wrote:
I am new to Apple!
Ah, new to routers too.
Perhaps it's best to have a local computer support person come set you up?
To explain everything would require writing a book here.
But this is what you want basically.
Router, new Wireless N, firmware updated.
1: Two accounts, one admin, one guest Internet access. Random +30 plus character lenght passwords each preferred.
(guest password to max password length of any iDevices)
2: Encryption: WPA2 AES. No Ping. No remote access. No MAC filtering. Visible.
3: Guest access on devices and computers only. Passwords written down and stored.
4: OpenDNS preferred but not mandatory.
If you get OpenDNS, you can log into their website for free and set parental controls on things like inappropriate sites for children. So whatever device is used on your network can't access a large portion of those sites (nothing is perfect) by most users who are not technical oriented.
What your doing now is running the bare bones unsecure router which can be used harmfully against you.
Even a Apple Airport router has to be very well secured. The defautl cd and out of the box setup is not a secure solution. -
Hi,
SharePoint 2010 Backup has been taken from production and restored through Semantic Tool in one of the server.The wepapplication of which the backup was taken is working fine.
But the problem is that the SharePoint is not working correctly.We cannot create any new webapplication ,cannot navigate to the ServiceApplications.aspx page it shows error.Even the Search and UserProfile Services of the existing Web Application is not working.Checking
the SharePoint Logs I found out the below exception
11/30/2011 12:14:53.78 WebAnalyticsService.exe (0x06D4) 0x2D24 SharePoint Foundation Database
8u1d High Flushing connection pool 'Data Source=urasvr139;Initial Catalog=SharePoint_Config;Integrated Security=True;Enlist=False;Connect Timeout=15'
11/30/2011 12:14:53.78 WebAnalyticsService.exe (0x06D4) 0x2D24 SharePoint Foundation Topology
2myf Medium Enabling the configuration filesystem and memory caches.
11/30/2011 12:14:53.79 WebAnalyticsService.exe (0x06D4) 0x12AC SharePoint Foundation Database
8u1d High Flushing connection pool 'Data Source=urasvr139;Initial Catalog=SharePoint_Config;Integrated Security=True;Enlist=False;Connect Timeout=15'
11/30/2011 12:14:53.79 WebAnalyticsService.exe (0x06D4) 0x12AC SharePoint Foundation Topology
2myf Medium Enabling the configuration filesystem and memory caches.
11/30/2011 12:14:55.54 mssearch.exe (0x0864) 0x2B24 SharePoint Server Search Propagation Manager
fo2s Medium [3b3-c-0 An] aborting all propagation tasks and propagation-owned transactions after waiting 300 seconds (0 indexes) [indexpropagator.cxx:1607] d:\office\source\search\native\ytrip\tripoli\propagation\indexpropagator.cxx
11/30/2011 12:14:55.99 OWSTIMER.EXE (0x1DF4) 0x1994 SharePoint Foundation Topology
75dz High The SPPersistedObject with
Name User Profile Service Application, Id 9577a6aa-33ec-498e-b198-56651b53bf27, Parent 13e1ef7d-40c2-4bcb-906c-a080866ca9bd failed to initialize with the following error: System.SystemException: The trust relationship between the primary domain and the trusted
domain failed. at System.Security.Principal.SecurityIdentifier.TranslateToNTAccounts(IdentityReferenceCollection sourceSids, Boolean& someFailed) at System.Security.Principal.SecurityIdentifier.Translate(IdentityReferenceCollection
sourceSids, Type targetType, Boolean forceSuccess) at System.Security.Principal.SecurityIdentifier.Translate(Type targetType) at Microsoft.SharePoint.Administration.SPAce`1.get_PrincipalName()
at Microsoft.SharePoint.Administration.SPAcl`1.Add(String princip...
11/30/2011 12:14:55.99* OWSTIMER.EXE (0x1DF4) 0x1994 SharePoint Foundation Topology
75dz High ...alName, String displayName, Byte[] securityIdentifier, T grantRightsMask, T denyRightsMask) at Microsoft.SharePoint.Administration.SPAcl`1..ctor(String persistedAcl)
at Microsoft.SharePoint.Administration.SPServiceApplication.OnDeserialization() at Microsoft.SharePoint.Administration.SPIisWebServiceApplication.OnDeserialization() at Microsoft.SharePoint.Administration.SPPersistedObject.Initialize(ISPPersistedStoreProvider
persistedStoreProvider, Guid id, Guid parentId, String name, SPObjectStatus status, Int64 version, XmlDocument state)
11/30/2011 12:14:56.00 OWSTIMER.EXE (0x1DF4) 0x1994 SharePoint Foundation Topology
8xqx High Exception in RefreshCache. Exception message :The trust relationship between the primary domain and the trusted domain failed.
11/30/2011 12:14:56.00 OWSTIMER.EXE (0x1DF4) 0x1994 SharePoint Foundation Timer
2n2p Monitorable The following error occured while trying to initialize the timer: System.SystemException: The trust relationship between the primary domain and the trusted domain failed. at System.Security.Principal.SecurityIdentifier.TranslateToNTAccounts(IdentityReferenceCollection
sourceSids, Boolean& someFailed) at System.Security.Principal.SecurityIdentifier.Translate(IdentityReferenceCollection sourceSids, Type targetType, Boolean forceSuccess) at System.Security.Principal.SecurityIdentifier.Translate(Type
targetType) at Microsoft.SharePoint.Administration.SPAce`1.get_PrincipalName() at Microsoft.SharePoint.Administration.SPAcl`1.Add(String principalName, String displayName, Byte[] securityIdentifier, T grantRightsMask,
T denyRightsMask) at Microsoft.SharePoint.Administrati...
11/30/2011 12:14:56.00* OWSTIMER.EXE (0x1DF4) 0x1994 SharePoint Foundation Timer
2n2p Monitorable ...on.SPAcl`1..ctor(String persistedAcl) at Microsoft.SharePoint.Administration.SPServiceApplication.OnDeserialization() at Microsoft.SharePoint.Administration.SPIisWebServiceApplication.OnDeserialization()
at Microsoft.SharePoint.Administration.SPPersistedObject.Initialize(ISPPersistedStoreProvider persistedStoreProvider, Guid id, Guid parentId, String name, SPObjectStatus status, Int64 version, XmlDocument state) at Microsoft.SharePoint.Administration.SPConfigurationDatabase.GetObject(Guid
id, Guid parentId, Guid type, String name, SPObjectStatus status, Byte[] versionBuffer, String xml) at Microsoft.SharePoint.Administration.SPConfigurationDatabase.GetObject(SqlDataReader dr) at Microsoft.SharePoint.Administration.SPConfigurationDatabase.RefreshCache(Int64
currentVe...
Please guide me on the above issue ,this will be of great help
Thanks.I have same error. Verified for trust , ports , cleaned up cache.. nothing has helped.
The problem is caused by User profile Synch Service:
UserProfileProperty_WCFLogging :: ProfilePropertyService.GetProfileProperties Exception: System.SystemException:
The trust relationship between the primary domain and the trusted domain failed. at System.Security.Principal.SecurityIdentifier.TranslateToNTAccounts(IdentityReferenceCollection sourceSids,
Boolean& someFailed) at System.Security.Principal.SecurityIdentifier.Translate(IdentityReferenceCollection sourceSids, Type targetType, Boolean forceSuccess) at System.Security.Principal.SecurityIdentifier.Translate(Type
targetType) at Microsoft.SharePoint.Administration.SPAce`1.get_PrincipalName() at Microsoft.SharePoint.Administration.SPAcl`1.Add(String principalName, String displayName, SPIdentifierType identifierType, Byte[]
identifier, T grantRightsMask, T denyRigh...
08/23/2014 13:00:20.96* w3wp.exe (0x2204)
0x293C SharePoint Portal Server User Profiles
eh0u Unexpected ...tsMask) at Microsoft.SharePoint.Administration.SPAcl`1..ctor(String persistedAcl)
at Microsoft.Office.Server.Administration.UserProfileApplication.get_SerializedAdministratorAcl() at Microsoft.Office.Server.Administration.UserProfileApplication.GetProperties() at Microsoft.Office.Server.UserProfiles.ProfilePropertyService.GetProfileProperties()
Please let me know if you any solution found for this?
Regards,
Kunal -
TFS non-domain and SCVMM on domain
Hello, Guys
I installed TFS 2013 on machine non-domain and I installed SCVMM on machine with domain controller and now I have a little problem.
The TFS is used for all my developer team and the QA team needs the lab management.
What the best way to solve this? Add TFS machine on domain controller? Is there way to connect TFS Lab (non-domain) to Lab machine on domain.
Kindly help
Thanks...Hi Heloias,
Thanks for your post.
Yes, we suggest you add TFS Server in the same domain. Or create the shadow account in your TFS Server machine and Lab server machine, then use the shadow account to configure Lab environment in TFS Admin Console.
https://msdn.microsoft.com/en-us/library/dd936084.aspx
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
How to read the Domain and Port of our server
hi guru,
Is there any method to get the portal Domain and Port .
http://<domain>:<port>/irj/portal
http://<Domain><port> /irj/servlet/prt/portal/prtroot/com.sap.portal.appintegrator.sap.bwc.Transaction?System=NIB_Aliase&SAP_TCode=se80
in our project we are hard coded the Domain and port .
if we transfer the application is some other server again we want to change.
So is there any solution for that.Please help me in this situation
Advance thank's
Regard's
Vivekanathan.SHi,
import com.sap.tc.webdynpro.services.sal.deployment.api.WDDeployableObjectPart;
import com.sap.tc.webdynpro.services.task.TaskBinder;
WDDeployableObjectPart d = wdComponentAPI.getDeployableObjectPart();
String hostName = TaskBinder.getCurrentTask().getProtocolAdapter().getServerName();
int port = TaskBinder.getCurrentTask().getProtocolAdapter().getServerPort();
With the above code you can get the host name, and port.
If your problem is solved, award me the points.
Thanks,
Srini -
When Convert, rendition checking and lock up
Hello Lady & Gentlman,
I`m looking for the method about one of convert work.
When convert, we can rendition check and after rendition checking. convert result file is upload the server or fixed drive.
Our customer want to only save in the fixed drive convert result file.
This mean is Client user not handling the rendition check box. and client user not shuld be able to save the convert result file in the local PC.
Here is
I`m find out the method How to do that renditon check and lock up.
And I need to advice and source code for this.
Please help me .
DJThe "Rendition" check box is enabled if connected to a DMS and DMS allows rendition of such format.
The rendition formats are requested from DMS using this property : Property.CSI_Renditions. -
Differece Between Weblogic Portal domian and Weblogic App Domain
Hi
Is there any difference between the Weblogic Portal domain and WebLogic App Domain
How to create an Weblogic Portal domain and configure oracle database with tht
Thankswhats a weblogic App domain? do you mean a workshop or server domain?
Yes theres a difference, these domains wont have Portal needed resources configured
Use the domain configuration wizard and you can create a new Portal domain or extend an existing one to add all the portal features.. look at edocs.bea.com for more info -
Virtual Domains and Aliases - the sequel
Ok pterobyte
I have successfully set up virtual domains and aliases on several systems including Mac OS 10.4 - now i'm trying to set up a brand new xserve to host a local domain and several virtual domains...
I have followed pterobytes method of creating virtual domains and aliases etc. However, whether I use /etc/postfix/aliases (for local users) or /etc/postfix/virtual for virtual users - I cannot get the mail to go to two addresses at the same time.
The mail.log only records the mail being sent to local mail box.
Here's an example:
local user example (remote.com is a remote domain where mail should be forwarded to as well as sent to local mail box.)
#aliases
local_guy [email protected], [email protected]
virtual user example
#virtual
[email protected] virtual_guy, [email protected]
"virtual.com" is set up as a virtual domain in SA Mail and mail.virtual.com is that users mail server in WGM.
BTW in pterobyte's latest pdf manual shortname 3 says "shortname3-x: aliases for e-mail address under shortname2" what does that mean?
As I said mail delievers correctly locally but does NOT go to the remote address. Does anyone have a clue what else I can look at?
anyone?
anyone?
Pterobyte?
PowerBook G4, MacBook, various servers Mac OS X (10.4.3)sorry I missed the colon in the posted message:
it is local_guy: [email protected], [email protected]
Here's the postconf -n (I restored the aliases file back to default last night - i've been working on the virtual forward.)
Thans for getting back so fast...
command_directory = /usr/sbin
config_directory = /etc/postfix
content_filter = smtp-amavis:[127.0.0.1]:10024
daemon_directory = /usr/libexec/postfix
debugpeerlevel = 2
enableserveroptions = yes
html_directory = no
inet_interfaces = all
mail_owner = postfix
mailboxsizelimit = 0
mailbox_transport = cyrus
mailq_path = /usr/bin/mailq
manpage_directory = /usr/share/man
mapsrbldomains =
messagesizelimit = 52428800
mydestination = $myhostname,localhost.$mydomain,localhost
mydomain = iplanitonline.com
mydomain_fallback = localhost
myhostname = mail.iplanitonline.com
mynetworks_style = host
newaliases_path = /usr/bin/newaliases
queue_directory = /private/var/spool/postfix
readme_directory = /usr/share/doc/postfix
sample_directory = /usr/share/doc/postfix/examples
sendmail_path = /usr/sbin/sendmail
setgid_group = postdrop
smtpdclientrestrictions = permit_mynetworks rejectrblclient sbl-xbl.spamhaus.org rejectrblclient relays.ordb.org permit
smtpdpw_server_securityoptions = cram-md5,login,plain
smtpdrecipientrestrictions = permitsasl_authenticated,permit_mynetworks,reject_unauthdestination,permit
smtpdsasl_authenable = yes
smtpdtls_keyfile =
smtpduse_pwserver = yes
unknownlocal_recipient_rejectcode = 550
virtualmailboxdomains = hash:/etc/postfix/virtual_domains
virtual_transport = lmtp:unix:/var/imap/socket/lmtp
MacBook (BootCamp), various Macs and servers Mac OS X (10.4.7) -
Publication, domain and fscommand
I have a flash application that comunicate with php scripts,
and test it localy (flash 8 - easyphp - IE7)
I tried 4 ways to "publish", and do not understand the logic:
- swf with flashplayer and option "local only": ok, i got a
warning message telling me that my application try to connect
itself with the network. The fscommand "quit" work fine. ok.
- swf with flashplayer and option "network only": no warning
message, but my application does not comunicate with the php
scripts. Du to different domain ? where can i fix that ?
The fscommand "quit" work fine.
- swf embeded with IE7 and option "local only": it was "local
only", but it works fine with php IF the flash domain and the php
domain are the same (127.0.0.1 for both). Does not work if
different domain (c:/my documents/ for flash and 127.0.0.1 for php
script ie)
fscommand "quit" does not work. Why ?
- swf embeded with IE7 and option "network only": it works
fine with php IF the flash domain and the php domain are the same.
Does not work if different domain. I put "allowScriptAccess" on
"always", and same thing: does not work if domain are differents.
fscommand "quit" does not work. Why ?
Anybody can explain me what really going on ?
I found flash 8.0 security too much complex....con JNDI
-
How can I set BPEL server enviorment and create BPEL domain?
Without use the http console, how can I set BPEL server enviorment and create BPEL domain?
When I try to use API like below
import com.oracle.bpel.client.Server;
Server s = new Server(ServerAuthFactory.authenticate("oracle","localhost"));
But I always got four exceptions and one warning like below:
java.io.FileNotFoundException: C:\Workspace\WOSEDISystem\BPEL_Domain_Creation\config\security.properties (The system cannot find the path specified)
java.io.FileNotFoundException: C:\Workspace\WOSEDISystem\BPEL_Domain_Creation\config\ejb.properties (The system cannot find the path specified)
Warning: unable to read transaction.interoperability config property
java.io.FileNotFoundException: C:\Workspace\WOSEDISystem\BPEL_Domain_Creation\config\security.properties (The system cannot find the path specified)
java.lang.Exception: Failed to create "ejb/collaxa/system/ServerBean" bean; exception reported is: "javax.naming.CommunicationException: Can't find SerialContextProvider
Is it right to use com.oracle.bpel.client.Server like this, please help me.
Best regards,
VitaAnyone can help me? Because I need deploy BPEL process on production server, so I need the Java funtion to create domain. Thank you very much if you can tell me the correct method of using com.oracle.bpel.client.Server API.
-
I have forgotten my password and locked my phone, how can i clear the problem
I have forgotten my password and locked my phone, how can i clear the problem
By coincidence, this happened to my son just last night. You do NOT have to restore it to a new phone, but you probably want a current backup.
Luckily, you can still sync and back it up even if it's locked, so connect it to the computer you usually sync it to. Go to the summary page. It's easiest and fastest to use a local backup, so if iCloud backup is on, turn it off and click "Backup now".
After it backs up, either click "Restore iPhone", or
- hold home and the top button until the screen goes black, release the top and continue to hold the home button until iTunes says "iPhone in recovery mode detected".
Follow instructions to restore from backup, and then sync to restore content. Your phone will come up in an unlocked state. If you have any stuff that was purchased directly to the iPhone (only), you'll have to re-download it.
Remember to turn iCloud backups back on if you use them.
If you don't sync you iPhone to a computer then I *think* those instructions with the buttons will put it into a mode where you can restore it from the cloud (make sure it is NOT connected to a computer while you do this). Otherwise, you will have to restore it as a new phone, then go to settings, reset, then restore it from the cloud. -
Every now and then, a weird white box with a keyhole, gear, and lock pops up in the upper left of my screen. I can't seem to close it or move it, and when I try to use another application, it stays there and blocks features. The only way I've found to make it go away is by force closing Firefox.Why does it pop up and how do I close it? I'm on an iMac, Snow Leopard. Have the latest version of Firefox, 10.0.2.
Here's a screenshot of the box: http://img11.imageshack.us/img11/6819/screenshot20120302at821.pngStart Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes -
i bought this apple ipad from pawn shop and have receipt. its locked by previous owner and pawn shop had no info on previous owner to contact. how can I delete all content and start fresh so my grandson can use for college?
If it's activation locked, you can't; go back to the shop and ask for a refund.
(120778) -
I have a first generation iPad and the screen went completely green on me and locked up. I was able to unlock it, but now there's a green haze all over the screen. Anyone know what the issue could be and how I can get it fixed?
Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Out-of-Warranty Service
If you own an iPad that is ineligible for warranty service but is eligible for Out-of-Warranty (OOW) Service, Apple will replace (Apple doesn't repair) your iPad with an iPad that is new or equivalent to new in both performance and reliability for the Out-of-Warranty Service fee listed below. (The replacement will most likely be a refurbished iPad in a brown box, however, it has a new screen, back and battery.)
iPad model
Out-of-Warranty Service Fee
iPad mini
$219
iPad 3rd, 4th generation
$299
iPad 2, iPad
$249
A $6.95 shipping fee will be added if service is arranged through Apple and requires shipping. All fees are in US dollars and are subject to local tax.
Certain damage is ineligible for out-of-warranty service, including catastrophic damage, such as the device separating into multiple pieces, and inoperability caused by unauthorized modifications. However, an iPad that has failed due to contact with liquid may be eligible for out-of-warranty service. See http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipad
Make a Genius Bar Reservation
http://www.apple.com/retail/geniusbar/
You may can get the iPad repaired at 3rd party repair sources for less $, however, any remaining Apple warranty will be voided.
iPad Repair & Screen Replacement Services
http://www.ifixyouri.com/16-ipad-repairs
RepairZoom iPad Repair
http://www.repairzoom.com/ipad-repair.html
Mission Repair
http://www.missionrepair.com/Apple_iPad_Repair_Services_s/431.htm
iGadgetResQ
http://www.igadgetresq.com/ipad-repair/
Cheers, Tom -
How do I select multiple files under "Get File Info"and lock or unlock all?
How do I select multiple files under "Get File Info"and lock or unlock them all? It seems to do it automatically when I have 10 or more selected. But how do I lock or unlock 5 or 6 files in one swoop? Thanks
Select the desired files then press OPTION and select Show Inspector from the Finder's File menu.
Why reward points?(Quoted from Discussions Terms of Use.)
The reward system helps to increase community participation. When a community member gives you (or another member) a reward for providing helpful advice or a solution to their question, your accumulated points will increase your status level within the community.
Members may reward you with 5 points if they deem that your reply is helpful and 10 points if you post a solution to their issue. Likewise, when you mark a reply as Helpful or Solved in your own created topic, you will be awarding the respondent with the same point values.
Maybe you are looking for
-
How to use a dictionary for multi languages when displaying mess
how to use a dictionary for multi languages when displaying messages??
-
CD-ROM opens by itself \ probook 4530s
I have a probook 4530s and after updating windows to windows 8.1 the CD- ROM keeps opening by itself . I scanned my computer for viruses and malware and it's free
-
E5:RealPlayer doesn't play correctly
mp4 video play but error for 1sec then play continue again error 1sec............The mp4 video play normal in pc and smartmovie of lonleycatgames .what does that means .........either to be updated.........or........? the video is downloaded from you
-
Can't install Firmware EFI 2.7 on MacBook Pro late 2011
The update still in update mode
-
Raid Manager 6.1.1 Sought
Looking for RM6.1.1, but unable to locate. On the Sun site, I get an access denied on the only link that appears to be the file. Any assistance appreciated.