How to redirect user from login page to "Set Challenge question" page

How to redirect user from login page to "Set Challenge question" page (NOT custom page) after 3 un successful password attempts?
Meaning when user types wrong password 3 times they will be redirected to set Challenge question page. If user answers the challenge question then password reset page should be appeared other wise (after remaining 3 un successeful challenge question answers) account should be locked out.
thanks for your help.

hi sandeep
Thanks for your answer. Let me ellaborate more on the requirement here.
- Password Policy and Lost Password management are set up in the identity system
- Configure login tries allowed= 5. Verify accout is lock out after 5 unsucessful login.
This is what need to achieve.
1) If a user attempts to login 3(not 5) times using an incorrect login credential he/she should be redirected to set challenge question (security question) page.
2) Then if the user attempts (remaining) 2 times incorrect challenge answer then his/her account should be locked out.
3) If he/she answers the challenge answer correctly then he/she should be redirected to password reset page.
Is this possible?

Similar Messages

Priventing WLS user from login into OBIEE 11g

I have 100+ users in Weblogic. Only some users say 60 are allowed to access OBIEE 11g.
How do I prevent other users from login into OBIEE (When they have OBIEE url :) ).
Thanks,
Mod

Hello,
You can put those 60 users in a group say OBIEE_Users and use this group in All Users Filter in WLS.
User Base DN : DC=CORP,DC=NET
All user Filter : (&(memberof=CN=OBIEE_Users,OU=BIUsers,DC=CORP,DC=NET)(cn=*)(objectclass=user))
User from name filter : (&(cn=%u)(objectclass=user))
Refer to this example on how its configured : http://paulcannon-bi.blogspot.com/2012/07/configuring-ldap-authentication-for.html
Hope this helps. Please mark if it does.
Thanks,
SVS

How to Block user from Sending IM or Hide Presence of there user who is not in his department

Hi All,
How to Block user from Sending IM or Hide Presence of there user who is not in his department.
Thank you

Hi Jp,
Method 1:
You can use the Enhanced Privacy Mode in Lync 2013
<section class="ocpSection">
Enable Privacy Mode
By default, everyone except Blocked Contacts can see your presence status. To modify the privacy settings, you can do the following:
In the Lync main window, click the Options button.
In the Lync - Options dialog box, click Status, and then do one of the following:
Click I want everyone to be able to see my presence regardless of system settings (override default settings).
Click I want the system administrator to decide - currently everyone can see my presence but this could change in the future.
</section>
About Enhanced Privacy Mode
If your organization has enabled Enhanced Privacy Mode in Lync, you can choose whether to limit visibility of your presence information to only those people you’ve added to your Contacts list. You do that by selecting one of the following on the
Options->Status window:
I want everyone to be able to see my presence
I only want people in my Contacts list to see my presence
Method 2:
Using Privacy Relationship, you can block a particular user by adding him to blocked contacts
Anil Kumar (MCITP)
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Parallel How many times user can login to the SAP system through ITS

Hello all
We are using the ITS ---620 and following 46D R/3 system
R/3 system details:
Kernal :
kernel release :46D
O/S :SunOS 5.8 Generic_108528-05 sun4us
We would like to now, At a time How many times user can login to the SAP system through ITS
Kindly letus know if any one have idea about parameter which can restrict the end users to u201CNu201D times/ sessions.
Transaction SITSPMON/SMICM are not working in R/3 system as it is 46D.
We found that parameter u201Clogin/disable_multi_gui_loginu201D works with SAPgui logons.
System logons using the Internet Transaction Server (ITS) or Remote Function Call (RFC) are not affected by this Parameter u201Clogin/disable_multi_gui_loginu201D
I need similar parameter u201Clogin/disable_multi_gui_loginu201D for the ITS users.
Thanks

I have searched all docs and notes.
Everytime the answer is PArameter for multi_gui_logonis not applicable for SAP Gui for HTML ( Browser )
The functionality does not exist for SAP Gui for HTML.
Regards,

How to remove Seperator from check-in and profile check in pages

How to remove Seperator from check-in and profile check in pages
The seperator is included on the checkin pages, which is present in the std_page with name "std_namevalue_separator", this is called by td_document_checkin_fields and std_document_file_fields.
Defination of include:
<@dynamichtml std_namevalue_separator@>
<$if not isUploadFieldScript$>
<tr>
<td width="<$captionFieldWidth$>"><hr /></td>
<td width="<$captionEntryWidth$>"><hr /></td>
</tr>
<$endif$>
<@end@>
I have to remove the following include from some of the profile check in page.
Please suggest if anyone have some idea, how to proceed.
Thanks,
Sumit

791848 wrote:I have to remove the following include from some of the profile check in page.The key here is that you want to do this in some profiles, not all profiles or globally, if I'm reading this right.
Without writing a component, you can put this code in the "side effects" box in the desired profile(s). This code removes the horizontal rule, and inserts a non breaking space in its place.
<$setResourceInclude("std_namevalue_separator","<$if not isUploadFieldScript$>
<tr>
<td width=\"<$captionFieldWidth$>\"> </td>
<td width=\"<$captionEntryWidth$>\"> </td>
</tr>
<$endif$>")$>YMMV. The non-breaking space may get stripped out in the forum.

How to prevent users from creating new folders in share folder directory?

Hello guys
I'd like to know How to prevent users from creating new folders in share folder directory but still keep their power of creating new folders in their personal 'my folder'?
I tried changing the 'manage privilage ---- create folder' to deny certain user accounts, but by doing so, it also stops the user from creating new folders in their 'my folder', which is not good..
I also tried going into these share folders and tried different access types such as 'change/delete', 'read', 'traverse folder' etc, but none of it work ideally. The 'change/delete' access still allows them to create new folders, 'read' access prevents creating new folders but also take away their power of saving reports..
Any thoughts on how to take away their ability to ONLY create new folders in share folder areas without affecting their other privileges?
Please advise
Thank you

Easy, on the shared folders root folder only give them 'read' or 'traverse folder' but on the the folder inside the shared folders root folder give them 'change/delete'. That means they can change anything inside those folders but not create any folders at the shared folders root level.

Restricting the Oracle user from Login

Hi,
I want to restrict the users from login depending on two parameters usind Database logon trigger,
i.e
1. MODULE (like SQL*Plus...)
2. USERNAME
I can get USERNAME from
select SYS_CONTEXT('USERENV','CURRENT_USER') from dual
But, select SYS_CONTEXT('USERENV','MODULE') from dual says invalid parameter.
Can anybody help me?
Ronald.

Both are working fine i saw
SQL> select SYS_CONTEXT('USERENV','CURRENT_USER') from dual
2 ;
SYS_CONTEXT('USERENV','CURRENT_USER')
APPS
SQL> select SYS_CONTEXT('USERENV','MODULE') from dual ;
SYS_CONTEXT('USERENV','MODULE')
SQL*Plus

How to redirect users to certain page on login

Hello All,
I need to redirect users to page 1 after login even if they use a direct URL pointing to some other page. How do i achieve this?
Ex:
User logs in using URL:
http://localhost:port/apex/f?p=101:10:1818843916449354::NO:::should redirect him to below page instead of 10:
http://localhost:port/apex/f?p=101:1:2314843916462565::NO:::Appreciate your reply.
Thanks and Regards,
Senana

Hello Senana,
Assuming you're using wwv_flow_custom_auth_std.login to log in, and p_flow_page is set to "[your app id]:1" try placing the following line just before your call to wwv_flow_custom_auth_std.login:
:FSP_AFTER_LOGIN_URL := null;This should force user to page 1 after log-in.
Hope this helps,
John

How to redirect users to Custom Page on InfoView logoff

Post Author: Srinivas123
CA Forum: WebIntelligence Reporting
How to redirect the users on InfoView logoff to a custom page, instead of the default logon.aspx.

Hello Senana,
Assuming you're using wwv_flow_custom_auth_std.login to log in, and p_flow_page is set to "[your app id]:1" try placing the following line just before your call to wwv_flow_custom_auth_std.login:
:FSP_AFTER_LOGIN_URL := null;This should force user to page 1 after log-in.
Hope this helps,
John

Redirecting user to login page after session expiry

Hi,
Default session expiry implementation in sap EP6.0 doesn't work properly. To overcome this, we have implemented one component where we check the idle time and throw the user back to the login page if the idle time has exceeded the session expiry period. This component has been added to desktop inner page as an iView. Following is the logic put in this component.
IAuthentication ia = UMFactory.getAuthenticator();
ia.logout(httpRequest, httpResponse);
httpResponse.sendRedirect("/irj/portal");
We are successfully getting the login page after session expiry. Issue is, our portal server is running on 11111 port. We cannot change this to 80 on unix because of unix limitations for the port number. So we have put one apache web server before our portal server. Apache web server is listening on port 80 and forwarding the request to our portal server.
Now when user is redirected to the login page, url being shown in the browser is http://<host_name>:11111/irj/portal but I am expecting http://<host_name>/irj/portal (without port). I have tried putting the full url in sendRedirect() method but that too doesn't work.
Any help is highly appreciated.
Regards,
Chandra

Hi Chandra,
Let the URL be relative in the sendRedirect i.e.
httpResponse.sendRedirect("/irj/portal");
However since you have a Reverse proxy in front, the response header for redirect will not contain the address of the reverse proxy in this case, your servername without port. You have to properly configure your reverse proxy so that the HTTP Headers are changed properly before sending the response to the users.
Check this URL,
http://httpd.apache.org/docs/1.3/mod/mod_proxy.html#proxypassreverse
This gives you the details on configuring your apache.
Hope this helps.
Ankur
P.S. If this helps please reward points.

How to prevent users from creating transactional problems?

Dear Sirs...
Using JDeveloper 10.1.2 and ADF UIX technology. If i created a web application that contains many pages. Assume the application contains pages A,B,C,D.
The end user should access the pages A then B then C then D to get the transaction executed and commited correctly.
the problem is:
1- if a user navigates from A to B to C then he press the Back button to A then he commits the transaction, the data would be stored in correctly.
2- if page C requires some preparations in page B (initalization of session variables) and the user enters page A then he changes the URL to C, then this would cause inproper execution of application and so the data would be stored incorrectly.
so how can i prevent the user from pressing the back button of the browser (which i do not think is possible) or how can i prevent him from making any errors by inproper page navigation?
thanks for any help in advance and best regards

I really don't know if this is the correct way of doing it, but we prevent navigation directly to any page within our application if the HTTP Referer header is null. If it's null, we redirect to a page that says the user should use the navigation buttons provided and not enter the page via bookmarks, history, or direct navigation via a typed in URL.

How to prevent users from entering '+' or '0' in front of country code in the phone number field?

Requirement:
How can I prevent guest users from entering '+' sign or '0' in front of country-code in the visitor phone number field during self registration?
Few SMS service providers are not looking for '+' sign or '0' or '00' in front of the international phone numbers to trigger the sms. Providing these values in front of country code during self-registration may fail to deliver the sms to recipient.
Solution:
Using a simple regular expression, you can validate the entered phone number during the guest registration.
The below regular expression will help you to validate the phone number and allows to register only when the phone number is not staring with '+' or '0'.
^[1-9][0-9](\d{7}|\d{8}|\d{9}|\d{10}|\d{11}|\d{12})$
It also performs the below validations.
only numbers are allowed.
first digit of the entered phone number should be 1 to 9, so '+' or '0' is not allowed.
numbers from 0 to 9 are allowed from the second digit.
also validates phone number length, the length of the phone number should be 9 to 14.
Configuration:
To add the above regex in the visitor_phone number filed, please navigate to ClearPass Guest >> Configuration >> (Pages)Guest Self-Registration >> select the self-registration page and go to Edit >> Register Page >> Form >> select the filed visitor_phone and set the Validator to " ISRegexMatch" and enter the above regex in the Validator Argument filed as shown below.
Note: Edit the Validation Error as per your requirement.
Verification
Adding the given regex will validate the phone number and prevent the guest user from registering the phone number starts with '+' or '0'.
Please find below the sample outputs for your reference.
Result when phone number starts with '+' or '0'.
Successful registration.

Is this a Mac Preview issue?

How to prevent user from selecting a specific printer?

Hi there
I have a MailFolder which has an ArrayList of Email objects inside it. Each MailFolder has an attribute called folderFile which is a reference to a folder in the operating system. Each Email has an attribute called parentFile which is a reference to a file in the operating system.
Now, I am trying to put printing into my application.
When I print using a normal printer like my HP Deskjet or the likes - an actual physical printer - everything works fine. But when I print using the Microsoft Office Document Image Writer, things go wierd. The following things happen;
I call myMailFolder.getFolderFile().exists() and this = false. But if I (in the debugger) make a new file pointing to the same path, .exists() = true. Also if I look in the OS, the file exists. So somehow in the job.print() this Document Image writer seems to be messing up this file reference. The same thing happens to the myEmail.getParentFile().
So to fix this, can anyone tell me how to prevent the user from selecting this printer, or can anyone tell me why this is happening only with the Document Image Writer?
Many thanks!
Rachel

I have similar problem with our printing program. I am printing Java Tables, zoom in every column in a landscape page accross multiple pages.
There are two fatal problems:
1. On Dell Latitude laptop, the HP5100 printer didn't work; I have to change the code to draw the table header with 2D graphics.
2. Crash when printing on MS document image writer, but on some computers
it works perfectly.
Any one have a good solution/same result for topic 2?
Thanks,

How to prevent user from "normal" navigation?

Hi everyone,
I have a PDF with a lot of pages, which are connect through Links (It's an export from MS Visio).
I now want all the users to keep navigating through the links and prevent accidental navigation through the "normal" way (Arrow-Keys, Mouse-Scroll, etcs...) as much as possible.
For this I have three ideas:
"Force" Fullscreenmode: Here I can prevent from advancing in pages by clickAdvances=false. However I think it's not possible to prevent page changes by mouse-scroll or key-press.
Using Layers: I have read, that it is possible to show/hide layers on demand with js. But I don't know how this can be done. And I would have to change the links to js-function showing the needed layer...
Loading/Deleting Pages: I could load and delete Pages on demand. This is probably slow and i would need two pdf files.
Does anyone knows something that could help me to solve this problem?
Cheers, Holger.

1. Not possible (except if the additional method described below is used).
2. This is possible, but it requires setting up the layers and then a system of buttons and scripts to show/hide them.
3. Also possible, but much more complicated than using layers.
Another option is to use a script to prevent the user from entering a page, unless its done via a button.
However, all of these methods have their disadvantages and can be very annoying for the users. You should really think if you want to implement this feature...

How to switch user from the current user using shell script code

Hi Experts,
I have an requirement to login into a particular user from the shell script concurrent program. I do have credentials for that particular user. I want to login and run few commands from that particular user. Please let me know if there are any methods to login as a particular user using the username, password from shell script program.
Thanks a lot.

Thanks for your reply. However we cannot use su command from a shell script program. How to enter password from shell script program?http://tinyurl.com/3t7cwjh
Thanks,
Hussein

How to redirect user from login page to "Set Challenge question" page

Similar Messages

Maybe you are looking for