How to reduce CPU Utlisation while working with OLAP Cubes?

Hi All,
I am working on OLAP cubes on MS SQL Server 2005. I have imported the same in the OBIEE rpd and when I query it in answers, the CPU Utilisation increases to 98%.
So the results also take pretty much time to get displayed.
Is there any other method with which I can reduce the CPU usage?
Regards,
Apoorv

Sorry, but that's like asking "My Data Warehouse is slow! What can I do?!".
Starting from the top of the food chain it depends on:
- how your report is built
- what the logical SQL is that this report fires against the BI server
- your logical business model
- your physical model in the rpd
- whether you use BI server aggregation or external aggregation for the cube source columns
- the structure of your cube
- whether your cube is pre-aggregated or not
- whether you did any performance tuning or your cube
...and tons of other things. I can query 5 dimensions with thousands of dynamic and shared members against dynamic accounts (not stored) without performance impact if I'm hitting an optimized cube (or area of my cube) but have > 1min performance for another comparatively simple query which queries a non-aggregated cube and does aggregation within the BI server (just as an example).
Start by verifying that your cube is nicely built.

Similar Messages

How to reduce CPU usage when working in Logic Pro and Kontakt5

Hello All,
I have a MacBook Pro 15" early 2011 2.0 GHZ. My main acitivity is making music with my macbook pro. I am using Logic Pro 9 in combination with Kontakt 5.
I want to get some suggestions in the setup so I can reduce the usage of the CPU. By the way I have upgraded my system with a SSD 256GB , 16GB RAM and have removed the optical drive and installed the the previous factory set HD in the optical bay. I have placed the samples of the Kontakt 5 in the HD so I have enough space on my SSD to run the progrmas fast and smooth !
If possible give your advise on an optimum setup such as reachanaling the sounds through BUS to AUX channels and other methods in order to reduce the CPU usage. You may even post some good links where I can find more info.
Thanks in advance
Wkrgds, Levon

welshwiggle wrote:
So Center of Pan,
If you were to run something like Omnipshere on an active SI track do you get anywhere near the "1 core CPU" spike I'm getting on my Late 2011 TOTR MBP?
I still dont really get why L9 on a new MBP peforms worse than eg your PC.
Older versions of Logic (ie: 5.5) don't see individual cores, there is one disk meter and one CPU meter. In some ways it's a more efficient system. This is running on WinXP which happens to be a very good system for audio. Consider this, XP can be installed and take up only half a gig of disk space and do 90% of what most operating systems can do today.
I do see single core spikes on my single processor quad core Mac Pro. There's no way to get around a processor intensive plugin on a single track. A channel strip is tied to a single process (core). I stopped upgrading at 10.6.8 and Logic 9.1.3, because it works. I still get the occasional single core use even with multiple plugs and tracks but I can usually break the logjam by quickly starting and stopping Logic 2 or 3 times.
I will not upgrade Mac hardware or software unless the next version of Logic is outstanding, I'm fine where I'm at for the next year or two. I enjoy recording performers more than anything else so al I really need is a good sounding, solid system.

How to handle the table control While working with LSMW?

How to handle the table control While working with LSMW?

its possible in lsmw,
Hi,
LSMW will have a Indicator for headr and itam, i do not remember the correct field, but it will have an indicator, check the fields, there will be a single charecter lenght field, that should be the indicator, and using that we can write the logic.
check that single charecter field, it that is X that means the header record is processed, and do the items.
and, this is another way, try this out also
YOu can do this in "Define Source Structures" step,
the HEADER is defined first,
then the DETAIL below the HEADER.
add the fields to the structures.
Both should have some common key field
Please take care that the name of the common field is the same.
Once you do this it is linked. The you have a header and item corresponding to that header. then run the LSMW as you would.
Thanks

How to upload taxes while working with po interface

Hi 2 all,
While working with PO interface we need to upload bulk of line items as it is working fine..
for every line we have to upload taxes also is it possible to upload taxes with po interface?
Regards
Siva

Now I get Facelets work with my JSPs.
I added the below to my web.xml:
<servlet-mapping>
          <servlet-name>Faces Servlet</servlet-name>
          <url-pattern>*.jsf</url-pattern>
     </servlet-mapping>
     <servlet-mapping>
          <servlet-name>Faces Servlet</servlet-name>
          <url-pattern>/faces/*</url-pattern>
     </servlet-mapping>
I am not clear in understandin what's the significance in using /faces/*. From my understanding the below should work as well. Help me in understanding where I'm goin wrong.
<servlet-mapping>
          <servlet-name>Faces Servlet</servlet-name>
          <url-pattern>*.jsf</url-pattern>
     </servlet-mapping>
     <servlet-mapping>
          <servlet-name>Faces Servlet</servlet-name>
          <url-pattern>*.xhtml</url-pattern>
     </servlet-mapping>
I have a requirement where the page should navigate from a JSP to a .xhtml(facelets page). Please help me out with this.

How do I get fios to work with my new desktop w/ Windows Media Center

Can someone please help me I have "fios".TV and internet 1HDSTB + 1HDDVR with multi room dvr Home media mgr.how do I get fios to work with my new desktop HP Pavillion m9715f**(specs below)**w/ Windows Media Center or did I just throw away my money?
also equipted is 47" Samsung 850series 1080p 120hertz HD LCD TV + 36" Samsung 560series 1080p 60hertz HD LCD TV and 19"Samsung 950b LCD Monitor
** computer specs**
Product number NZ017AA
Introduction date 30-Jun-2009
Country/region sold in: United States,Canada
Hardware Base processor
Phenom-9650 (A) 2.3 GHz (95W) 3600 MHz HyperTransport 3.0 Socket, AM2+
Chipset AMD 780G
Motherboard Manufacturer: MSI Motherboard Name: MS-7548 HP/Compaq motherboard name: Aspen-GL8E
Power supply 300W
Memory
Component Attributes Memory Installed 8 GB Maximum allowed 16 GB (4 x 4 GB) (64-bit OS)
4 GB* (4 x 1 GB) (32-bit OS)
*Actual available memory may be less Speed supported PC2-6400 MB/sec Type 240 pin, DDR2
Hard drive750 GB SATA 3G (3.0 Gb/sec)7200 rpm
Blu-ray player & SuperMulti DVD burner with LightScribe Technology drive
This Blu-Ray Disc DVD drive introduces a player that reads Blu-ray Disc format enabling you to watch high-definition Blu-ray Disc movies. NOTE: This drive does not include high-definition write capability.
Formats/Disc types Write speeds Read speeds Storage capacity Blu-ray Disc BD-ROM SL NA up to 6X up to 25 GB BD-ROM DL NA up to 4.8X up to 50 GB BD-R SL not supported up to 6X up to 25 GB BD-R DL not supported up to 4.8X up to 50 GB BD-RE SL not supported up to 2.3X up to 25 GB BD-RE DL not supported up to 2X up to 50 GB HD DVD not supported DVD DVD-ROM SL NA up to 16X up to 4.7 GB DVD-ROM DL NA up to 8X up to 8.5 GB DVD+R SL up to 16X up to 12X up to 4.7 GB DVD+R DL up to 4X up to 8X up to 8.5 GB DVD+RW SL up to 8X up to 10X up to 4.7 GB DVD+RW DL not supported DVD-R SL up to 16X up to 12X up to 4.7 GB DVD-R DL up to 4X up to 8X up to 8.5 GB DVD-RW SL up to 6X up to 10X up to 4.7 GB DVD-RW DL not supported DVD-RAM up to 5X up to 5X up to 4.7 GB CD CDROM NA up to 40X up to 700 MB CDR up to 40X up to 40X up to 700 MB CDRW up to 24X up to 40X up to 700 MB CD-DA NA up to 32X up to 700 MB Video CD NA up to 10X up to 700 MB
Wireless Wireless LAN 802.11 b/g
Video Graphics Radeon HD4350
512 MB DDR2 memory
I/O Ports: HDMI, VGA, single-link DVI
Television Hauppauge ATSC/NTSC TV tuner card with FM tuner
Sound/Audio High Definition 8-channel audio
ALC 888S chipset
Network (LAN) Integrated 10/100/1000 Base-T networking interface
Memory card reader
Contains an Infrared receiver for remote control
Supports the following cards:
Compact Flash I
Compact Flash II
IBM Microdrive
Secure Digital (SD)
mini-SD
MultiMediaCard (MMC)
Reduced size MultiMediaCard (RS-MMC)
MultiMediaCard Plus (MMC plus)
MultiMediaCard Mobile (MMC mobile)
Memory Stick
Memory Stick Pro
Memory Stick Duo
Memory Stick Pro Duo
SmartMedia
xD Picture Card (xD = extreme digital)
External I/O ports
I/O ports on the front panel
Port type Quantity 15-in-1 (4 slot) with IR Receiver One USB Two Headphone One Microphone One Audio L-R One S-video in One Composite video in One
I/O ports on the back panel
Port type Quantity PS/2 (keyboard, mouse) Two S/PDIF out (coaxial) One VGA One (disabled due to the installation of a graphics card) DVI-D One USB Four 1394a One LAN One Audio (side speaker out, rear speaker out, center/subwoofer-out , line-in, line-out, microphone) One Each
Expansion slots
Slot type Quantity PCI Express x16 One (None available) PCI Express x1 Three (Two available)
Drive bays
Bay type Quantity 5.25" Two (One available) 3.5" Two (One available) Personal Media Drive One (One available) Pocket Media Drive One (One available)
Keyboard and mouse HP multimedia keyboard HP PS/2 optical mouse
Remote Control USB infrared remote control,Remote control expansion card with IR ports,IR emitter cable to transmit codes to a set top box

Based on what you've posted, your computer does not have the right tuner. You need a QAM tuner to record locals from FiOS, or a CableCard tuner to record all local and cable channels from FiOS.
QAM tuners to record local channels only
This requires Windows Vista or Windows 7
Hauppauge WinTV-HVR-2250
SiliconDust HDHomeRun (info on a sale)
CableCard tuner to record local and cable channels
This requires Windows 7 + one CableCard from Verizon for $3.99/mo
ATI TV Wonder Digital PC CableCard Tuner (records one channel at a time) -- $200-$250 on ebay
Ceton MOCUR tuner (records four channels at a time) -- coming in early 2010 for $400-$600
Make sure your computer has Windows 7 Home Premium (or better) installed. That's necessary to support CableCard tuners.
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it.

Update to kichat: FAQ 2 - How to get my router to work with iChat?

kichat: FAQ 2 - How to get my router to work with iChat? December 2008 version 3
(Note to Hosts. to be removed on acceptance. Please use this to replace http://discussions.apple.com/thread.jspa?threadID=121775 )
Getting your router started with iChat.
Appropriate for using iChatAV 2 upwards. Edits have been made for iChat 4
Glossary for this FAQ
Routers: Any configurable device that sits between your computer and the internet link you have. This includes Modems that Route as well as "routers"
Routers seem to fall into two categories
Those that work straight from the box. See Apple Article HT1787
NOTE :This Article has not been updated in content since Jan 04 Only being changed to an Article from the Previous Doc listing
Even then some list that they need tweaks.
and those that do not.
This post will deal with what you may need to look at.
First off make sure your device is acting as a DHCP server. (if you are already on the internet you may not have to bother with this.)
Check in the Tiger System Preferences > Network Preference Pane, in the "Built in Ethernet" option from the "Show" drop down list.
In Leopard the Networks are listed on the left with icons. The Airport Option will need you to access the Advance Button for the Next bit.
Make sure the TCP/IP tab is the 'front' one. You should be able to see Configure IPv4 and it most likely reads Using DCHP. Make a note of your IP address. It will start 10.xxx.xxx.xxx or 192.168.xxx.xxx (the 'x' s will stand for any number between 1 and 255). The range 172.16.xxx.xxx is also a possible value at this point. Rarely used, but it is part of the RFC for Address Allocation for Private Internets.
Your router is most likely to be configurable from your browser. You will need to find the IP address to type into the browser from any Readme or PDF files that came on the install disk or visit the makers website and download a manual.
The Port Forward.com site lists many devices and clicking on one will take you to a list of Applications. This iChat will open an page that will start by telling you the defaults to access the device
Opening or Allowing ports. Several Methods not all devices have all of them.
DMZ (Demilitarised Zone)
This is a less secure setting that basically opens all ports and points the incoming data to your computer. (not helpful if you have more than one computer on your LAN). It can be considered as an extreme form of Port Forwarding
Port Forwarding (also Virtual Server or Pin Holes)
These settings are usually found in an Advanced setting.
You may need to set an incoming IP address (Usually 0.0.0.0 to any outside server), a port that data will arrive on, the Inside computer's IP address (your computer) and the port it will deal with the data on and the protocol it will use.
See this pic for an example of the description above.
In this example shows that on some Port AND Protocols need to be listed.
iChat uses TCP and UDP so some devices will need the ports listed one by one and some settings done twice, once for each protocol. The example above has a "Both" setting
See Apple Article HT1507 Previously Doc 93208 for more information. This is the Tiger iChat 3 list. The same ports are needed for Leopard except for these changes
My Note 2:
On the first link Note 1 under tables in that link would be better if it read:
" 1. All iChat AV traffic is UDP -
except for ports 5190 and 5298, which need to be open for both TCP as well;
and 5220, 5222, which need to be open for TCP only. "
Note 2
GoggleTalk needs port 5223 on TCP. Also note the Server name for iChat 3 set ups
UPnP Universal Plug n Play.
This is a simple Plug and Play type of setting. iChat can find it's own way through a router if the device has this capability.
By Not doing Port Forwarding, Triggering or DMZ and enabling UPnP the application is allowed to control the modem and the ports that are open.
They close after the application has finished with them on a timed basis.
On some devices the number of "hops" (how far away the UPnP can be "seen") can be reduced from a default of 4)
Trigger Ports
Some devices offer a security measure that works by a first or trigger port receiving a data packet and then opening further ports when accepted.
The first port for incoming Video or Audio invites is port 5678.
Pre iChat 4
When you click on the invite window the process moves in to port 5060 (so these will need to be opened by the trigger port) for negotiating the final group of ports from the group of 20 (16384-16403 These will need to open when the trigger says so as well). Therefore port 5678 triggers ports 5678, 5060, 16384-16403. All on UDP. Port 5190 neeeds to trigger port 5190 for both TCP and UDP.
See this variation where only the ports listed above are completed.
The other single ports need to be set one by one in addition. (5220,5222, 5223 5297, 5298, 5353)Replace
iChat 4
The port used in IChat 4 is port 16402 instead of port 5060. The group of 20 ports is reduced to 10 (16393-16402). This is because all the In and Out Audio and Video data is on one port. Other that than the settings are the same.
At this time there is no Info on the ports the Screen Sharing in iChat 4 uses.
Wireless
Here you will have to read around but this Apple Article TA25949 Previously Doc 58514 might be a good starting place.
Essentially whether you are wireless or Ethernet to your routing device makes very little difference to the way you do things.
Your computer will get two IPs from a DHCP server if you are connected by both methods. (iChat does not like this)
Multiple devices
Make sure only one is acting as a DHCP server. Make sure wireless devices are bridged properly.
Further Help
I have found that this site (ADSLGuide) to be helpful.
It is British based but I have linked you to the Apple Related Discussions Forum.
Eliminating Problems on my Personal web pages.
The ports and their function within iChat. (my personal Web pages again)
This is not a step by step approach. You will have to read around the information about your device.
Collected FAQs and Expansions: Index Page Based on FAQs here by EZ Jim and myself
Also http://www.portforward.com/routers.htm for instructions with Pics on Port Forwarding and access info as mentioned earlier.
Click on your device.
Select iChat on the next page.
Follow the info on the next.
This site is godd for finding out the Default IP to use in a web browser and the default User ID and Passwords needed to do so.
Gives you a chance to look at at pics to give clues to where some of these other things are.
With thanks to Macmuse for comment on the Original (Aug 23rd 2004)
and to EZ Jim for his work on iSights on my web pages.
I may receive some form of compensation, financial or otherwise, from my recommendation or link.
9:51 PM Saturday; December 6, 2008

kichat: FAQ 2 - How to get my router to work with iChat? December 2008 version 3
(Note to Hosts. to be removed on acceptance. Please use this to replace http://discussions.apple.com/thread.jspa?threadID=121775 )
Getting your router started with iChat.
Appropriate for using iChatAV 2 upwards. Edits have been made for iChat 4
Glossary for this FAQ
Routers: Any configurable device that sits between your computer and the internet link you have. This includes Modems that Route as well as "routers"
Routers seem to fall into two categories
Those that work straight from the box. See Apple Article HT1787
NOTE :This Article has not been updated in content since Jan 04 Only being changed to an Article from the Previous Doc listing
Even then some list that they need tweaks.
and those that do not.
This post will deal with what you may need to look at.
First off make sure your device is acting as a DHCP server. (if you are already on the internet you may not have to bother with this.)
Check in the Tiger System Preferences > Network Preference Pane, in the "Built in Ethernet" option from the "Show" drop down list.
In Leopard the Networks are listed on the left with icons. The Airport Option will need you to access the Advance Button for the Next bit.
Make sure the TCP/IP tab is the 'front' one. You should be able to see Configure IPv4 and it most likely reads Using DCHP. Make a note of your IP address. It will start 10.xxx.xxx.xxx or 192.168.xxx.xxx (the 'x' s will stand for any number between 1 and 255). The range 172.16.xxx.xxx is also a possible value at this point. Rarely used, but it is part of the RFC for Address Allocation for Private Internets.
Your router is most likely to be configurable from your browser. You will need to find the IP address to type into the browser from any Readme or PDF files that came on the install disk or visit the makers website and download a manual.
The Port Forward.com site lists many devices and clicking on one will take you to a list of Applications. This iChat will open an page that will start by telling you the defaults to access the device
Opening or Allowing ports. Several Methods not all devices have all of them.
DMZ (Demilitarised Zone)
This is a less secure setting that basically opens all ports and points the incoming data to your computer. (not helpful if you have more than one computer on your LAN). It can be considered as an extreme form of Port Forwarding
Port Forwarding (also Virtual Server or Pin Holes)
These settings are usually found in an Advanced setting.
You may need to set an incoming IP address (Usually 0.0.0.0 to any outside server), a port that data will arrive on, the Inside computer's IP address (your computer) and the port it will deal with the data on and the protocol it will use.
See this pic for an example of the description above.
In this example shows that on some Port AND Protocols need to be listed.
iChat uses TCP and UDP so some devices will need the ports listed one by one and some settings done twice, once for each protocol. The example above has a "Both" setting
See Apple Article HT1507 Previously Doc 93208 for more information. This is the Tiger iChat 3 list. The same ports are needed for Leopard except for these changes
My Note 2:
On the first link Note 1 under tables in that link would be better if it read:
" 1. All iChat AV traffic is UDP -
except for ports 5190 and 5298, which need to be open for both TCP as well;
and 5220, 5222, which need to be open for TCP only. "
Note 2
GoggleTalk needs port 5223 on TCP. Also note the Server name for iChat 3 set ups
UPnP Universal Plug n Play.
This is a simple Plug and Play type of setting. iChat can find it's own way through a router if the device has this capability.
By Not doing Port Forwarding, Triggering or DMZ and enabling UPnP the application is allowed to control the modem and the ports that are open.
They close after the application has finished with them on a timed basis.
On some devices the number of "hops" (how far away the UPnP can be "seen") can be reduced from a default of 4)
Trigger Ports
Some devices offer a security measure that works by a first or trigger port receiving a data packet and then opening further ports when accepted.
The first port for incoming Video or Audio invites is port 5678.
Pre iChat 4
When you click on the invite window the process moves in to port 5060 (so these will need to be opened by the trigger port) for negotiating the final group of ports from the group of 20 (16384-16403 These will need to open when the trigger says so as well). Therefore port 5678 triggers ports 5678, 5060, 16384-16403. All on UDP. Port 5190 neeeds to trigger port 5190 for both TCP and UDP.
See this variation where only the ports listed above are completed.
The other single ports need to be set one by one in addition. (5220,5222, 5223 5297, 5298, 5353)Replace
iChat 4
The port used in IChat 4 is port 16402 instead of port 5060. The group of 20 ports is reduced to 10 (16393-16402). This is because all the In and Out Audio and Video data is on one port. Other that than the settings are the same.
At this time there is no Info on the ports the Screen Sharing in iChat 4 uses.
Wireless
Here you will have to read around but this Apple Article TA25949 Previously Doc 58514 might be a good starting place.
Essentially whether you are wireless or Ethernet to your routing device makes very little difference to the way you do things.
Your computer will get two IPs from a DHCP server if you are connected by both methods. (iChat does not like this)
Multiple devices
Make sure only one is acting as a DHCP server. Make sure wireless devices are bridged properly.
Further Help
I have found that this site (ADSLGuide) to be helpful.
It is British based but I have linked you to the Apple Related Discussions Forum.
Eliminating Problems on my Personal web pages.
The ports and their function within iChat. (my personal Web pages again)
This is not a step by step approach. You will have to read around the information about your device.
Collected FAQs and Expansions: Index Page Based on FAQs here by EZ Jim and myself
Also http://www.portforward.com/routers.htm for instructions with Pics on Port Forwarding and access info as mentioned earlier.
Click on your device.
Select iChat on the next page.
Follow the info on the next.
This site is godd for finding out the Default IP to use in a web browser and the default User ID and Passwords needed to do so.
Gives you a chance to look at at pics to give clues to where some of these other things are.
With thanks to Macmuse for comment on the Original (Aug 23rd 2004)
and to EZ Jim for his work on iSights on my web pages.
I may receive some form of compensation, financial or otherwise, from my recommendation or link.
9:51 PM Saturday; December 6, 2008

CRITICAL: Error occured while working with configuring .in WAS deploytool

Hi,
I have installed developer workspace WAS edition SP11.
I had given a master password to all the users created while installation.
But now for deployement and visual administration that password is not working.
So i started deploytool to enable Superadmin.
It allows me to change the value but when i save it,
it throws error stating:
<b>"CRITICAL : Error occured while working with configuration"</b>
and then deploytool stops abruptly.
Unless I enable superadmin, i wont be able to reset all my passwords.
How do i proceed??
AbhiJeet..

Hi all and Abhijeet especially,
have you found the cause of this problem? I'm experiencing exactly the same thing. What's to be done about this?
<u>excerpt from configtool log file:</u>
Error occurred while working with Configuration.
com.sap.engine.frame.core.configuration.ConfigurationException: Error occurred during DB access: ,
     at com.sap.engine.core.configuration.impl.persistence.rdbms.UpdateProcessor.flush(UpdateProcessor.java:294)
     at
     com.sap.engine.core.configuration.impl.cache.ConfigurationCache.commitConfigurationHandler(ConfigurationCache.java:1217)
     at com.sap.engine.core.configuration.impl.ConfigurationHandlerImpl.commit(ConfigurationHandlerImpl.java:833)
     at com.sap.engine.configtool.batch.task.TaskUtil.changeProperties(TaskUtil.java:337)
     at com.sap.engine.configtool.batch.task.ChangeServicePropsTask.go(ChangeServicePropsTask.java:59)
     at com.sap.engine.configtool.batch.task.TasksThread.run(TasksThread.java:46)
Caused by: com.sap.dbtech.jdbc.exceptions.BatchUpdateExceptionSapDB: [-3018]: Invalid numeric parameter(input position 2)
     at com.sap.dbtech.jdbc.CallableStatementSapDB.executeBatch(CallableStatementSapDB.java:608)
     at com.sap.sql.jdbc.direct.DirectPreparedStatement.executeBatch(DirectPreparedStatement.java:1102)
     at com.sap.sql.jdbc.direct.DirectPreparedStatement.executeBatch(DirectPreparedStatement.java:1066)
     at
     com.sap.engine.core.configuration.impl.persistence.rdbms.DBAccessDefault.execInsertEntryBatch(DBAccessDefault.java:1170)
     at com.sap.engine.core.configuration.impl.persistence.rdbms.UpdateProcessor.flush(UpdateProcessor.java:257)
     ... 5 more
Message was edited by: Chee Choong Ching

Exception while working with Tibco adapter for Tuxedo!!

Dear friends,:-)
Greetings!
I am facing an exception while working with "Tuxedo Adapter".
I have installed TIBCO Adapter for Tuxedo on my machine which has both bea_Client and Server. I am trying to do a PurchaseOrder POC, which is already given in our TIBCO Adapter directory (C:\TIBCO\adapter\adtuxedo\5.3\examples\AgentBased\PurchaseOrder).
The scenario goes like this, a request is sent from the Tuxedo client called clt, which invokes the Tuxedo service, which in turn sends a request to the adapter (“PublicationService”) through the adapter agent, and then the adapter publishes the data to the TIBCO environment. TIBCO BW receives the data using “Adapter Subscriber” and writes them to an XML output file named Get_output.xml.
Problem in starting the Adapter - :(
When I tried to RUN the make.bat which is placed at the “C:\TIBCO\adapter\adtuxedo\5.3\examples\AgentBased\PurchaseOrder” folder, it throws me the error.
At the time of executing this script, “buildclient -o clt -f client.c”, it says that I don’t have a valid “TUXEDO SDK LICENSE”. The thrown exception is, "TUXNT_CAT:101: ERROR: You do not have a valid TUXEDO SDK license".
Please tell me, is license Required to run the tux_client?
also,please clarify, while configuring “tibco.env.WSNADDR”(i.e., Workstation Address of the Tuxedo server to connect to) I have given my machine IP ADDRESS with a unique port. i.e., //10.103.18.120:4020. I am not sure with this step. Please advice me!
It would be great if you could please solve this issue.
Thanks in Advance,
Best Regards,
Venkatesh Rajendran.

Hi Venkatesh,
Please see comments in line.
Wayne
<venkatesh rajendran> wrote in message news:[email protected]...
Dear Wayne,
Thanks a ton for your reply.
Please clarify,
buildclient is a Tuxedo command which is used to generate the Tuxedo client
application. It needs Tuxedo SDK license, so you need to make sure the
license is installed properly.
Can you please let me know from where i can get the License? Can we download
it online?
[W] BEA provide a trial license in the product donwload site, but I am not
sure Tuxedo 8.0 is provide or not. If you or your customer has Tuxedo
installation, the license should alread be ready. It is located at
$TUXDIR/udataobj/lic.txt.
Running tuxedo client does not require SDK license.
I am not sure how to start it. I am actually running the BAT file which has
the following scripts,
set TUXDIR=C:\bea\tuxedo8.0
set WSNADDR=//10.103.18.120:4020
set TUX_ADAPTER_HOME=C:\TIBCO\adapter\adtuxedo\5.3
set TIBCO_RV_HOME=C:\TIBCO\TIBRV
set APPDIR=%TUX_ADAPTER_HOME%\examples\AgentBased\PurchaseOrder
set
PATH=%TUXDIR%\bin;%APPDIR%;%PATH%;%TUX_ADAPTER_HOME%\hotfix\lib;%TUX_ADAPTER_HOME%\lib;%TIBCO_RV_HOME%/bin
set TUXCONFIG=%APPDIR%\tuxconfig
set ULOGPFX=%APPDIR%\ulog
buildclient -o clt -f client.c
buildserver -o server -f server.c -s POINFO -l
%TUX_ADAPTER_HOME%\lib\agent.lib
tmloadcf -y ubbagent
tmboot ¨Cy
Up to my knowledge, I hope TIBCO TUXEDO
(ie.,TIB_adtuxedo-simple_5.3.0_w32_tuxedo80) acts as a TUXEDO_Server which
receives the Request from TUX_BEA Client(Ex: C:\bea\tuxedo8.0).
Or, does Tuxedo have a seperate Server installed on the machine other than
TIBCO? please clarify.
[W] I don't know the detail about TIBCO Tuxedo adaptor. Following
clarifications for your reference,
1. Tuxedo is an application infrastructure with framework for server and
client. buildclient is used to generate the client binary and buildserver is
used for application server linkage.
2. I guess the TIBCO Tuxedo adaptor is a Tuxedo application client(or
server?) which acts as a proxy process between TIBCO system and Tuxedo
applications. So it receives request from TIBCO system and transform the
requet to native Tuxedo data buffers and make the Tuxedo calls, then relay
the reply back. So first you have to figure out the exact working model of
it and check your Tuxedo applications.
Your reply would be appreciated!
Thanks a ton in Advance!
Best Regards,
Venkatesh Rajendran.

Error occurred while working with Configuration(scanning)

Hello ,
In my system i am trying to start java engine but i am not able to connect the
java and trying to fix some error through config tool while connecting config tool from os level i am getting the following error
OS: SUNSOLARIS
DB : MaxDb
Error :
Error occurred while working with Configuration(scanning) Msg:Error while connecting to DB
how to fix this issue? Please some one reply as soon as possible .
your help would be appreciated. I am waiting for your reply.
Regards,
Sankar.G

Hello Sankar,
Please update with additional information:
What is the version of the database?
Is your database full?
< See answer on the question " 22. What do I do if the data area is full?" in the SAP note 846890. >
Please run the following commands on the database server & update with outputs:
        sdbregview -l
        xinstinfo <DB-name>
        x_cons <DB-name> show active
       dbmcli -d <DB-name> -u control,<pwd> db_state
      dbmcli -d <DB-name> -u control,<pwd> param_getvolsall
Check errors/warnings in the knldiag file.
Please check jvm_bootstrap.out.
Check the System.log at /usr/sap/.../<..>/j2ee/configtool/system.log
Thank you and best regards, Natalia Khlopina

While working with Google Documents Safari Version 7.1 on OS X 10.9.4 crahses all the time

While working with Google Documents Safari Version 7.1 on OS X 10.9.4 crahses all the time
Now I am working with FireFox
Today I have noticed that FireFox had this Google Talk pop-up
Maybe this pop-up Google Talk is what is causing Safari 7.1 to crash Attached JING of Google Talk pop-up on FireFox
So, back to SAFARI 7.1..how to stop this pop-up from crashing Safari 7.1

You downloaded a beta copy of 7.1 because the current version is 7.0.5. There was a mixup yesterday and 7.1 was accidentally made available for downloading. Do you have a backup you can restore from to get 7.0.5?
You can also try running the combo update to see if it will restore it.
10.9.4 Combo Update

Problems While Working With CLOB fields

HI Friends,
I am facing one big problem while working with CLOB fields. I work in crystal reports in my project and My team is works in BMC Remedy tool. As per database configuration by default the date fields are stored in numbers. There is a field named Work Log which stores the complete history information of a ticket or a call.
While generating reports I convert the date fields from numbers into date values by using to_date function. But I am not able to change the dates mentioned in the worklog which is a CLOB field. As a result when I am generating reports text part of the work log is comming fine but the date fields are comming in numbers.
Please refer the below example:-
*1291012455anilkumarptesting*
Full Name:
PRG Name - EUC-APP PKGN1291012585anilkumarptesting
Full Name:
PRG Name - EUC-APP PKGN1291012631anilkumarptest
Full Name:
PRG Name - EUC-APP PKGN1291207510anilkumarpfd
Full Name: Anil Kumar Pantangi
PRG Name - Prod_Ops1291207535anilkumarpf
Full Name: Anil Kumar Pantangi
PRG Name - Prod_Ops
Assignment notification disabled for this transaction1291212517kapilbasd
Full Name: Anil Kumar Pantangi
PRG Name - Prod_Ops
See the first line of the worklog "1291012455anilkumarptesting", 1291012455 is referring a date value, but due to database configuration it's comming in number. All the other numbers in the above text are dates only which need's to be converted. These dates are captured in remedy tool when someone updates that ticket.
I am not able to decide how to change this numbers into dates. As it is containing lot's of numbers i am really confused how to come with a solution.
Can I expect a solution from you, atleast a way how to proceed resolving this problem. Should I have to write a procedure for this??
Please help..........
Kindly let me know if you need any more input.
Regards,
Arijit

937670 wrote:
1291012455 represents a date value,What date value does it represent? Since it's not obvious to us what date you want that converted into, it's obviously hard for us to help. For example, perhaps you want that to be Jan 29, 2010 with "12455" representing a time component in some non-obvious format. Perhaps you want that to be December 1991 at 1:24:55. Perhaps you want to convert it to a completely different date. You're going to need to tell us in words how to convert your numeric data into a date.
My question is how can I convert all the numbers into date in the CLOB field and present it in a proper manner.Given your sample data, what do you expect the output to be? Do you expect many rows of data, one for every date in the CLOB? Do you expect a comma-separated list? Something else?
Justin

How to get online apps to work with the Verizon DSL modem firewall set at "Medium" level, not "Low?"

How to get online apps to work with the Verizon DSL modem firewall set at “Medium” level? Xbox 360 Live, FTP, and the Windows sntp Time checker native to Windows XP WON’T WORK unless the Verizon firewall is first reset down to “Low.” Then all works well, but I then risk low firewall protection. Setup: · Westell 6100 DSL modem (Software Version: VER:4.04.03.00 Transceiver Revision: 7.2.3.0 Model Name: C90-610015-06), · D-Link DIR-655 wireless router (Hardware Version: A3, Firmware Version: 1.21), For Xbox 360 Live the “canned” port forwarding rule for provided in Verizon’s drop-down list for the Westell 6100 modem forwards ports 88 and 3074 for both TCP and UDP. This does not meet Microsoft’s forwarding recommendations for Xbox 360 Live stated at http://support.microsoft.com/kb/908874. Instead, for the Verizon modem (Westell) I made a new port forwarding rule to comply with those Microsoft instructions. It forwards ports 53, 80 and 3074 for TCP and ports 53, 88 and 3074 for UDP. These same ports are also forwarded in the D-Link router configuration. For FTP, port 21 is also forwarded for TCP and UDP in both modem and router. But they don’t work until I first cripple the Verizon firewall down to “Low.” How to get them to work with the Verizon firewall up to Medium?

While I do not know the answer to your question, BUT since you have this modem and another router - you could just follow.
http://www.dslreports.com/faq/13600
^^
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

How does Creative Cloud for teams work with staff who work in two locations ie in the office/home

How does Creative Cloud from teams work with staff who work in two locations i.e. in the office and home?

There is no difference please be aware that each login is provided with two activations however. If you wish to have a computer at both work and home activated though that is perfectly fine as long as your employer is ok with using company software at home.

My iPod Classic is seen by Windows but not by iTunes. I have reset it, gone to disk mode and it won't show up in iTunes. There appears to be music on it in a file called MUSICSAVE. How can I get this to work with iTunes again?

My iPod Classic is seen by Windows but not by iTunes. I have reset it, gone to disk mode and it won't show up in iTunes. There appears to be music on it in a file called MUSICSAVE. How can I get this to work with iTunes again?

1. Update iTunes to the latest version. Plug in your iPod. If iTunes still can't recognize it, then in iTunes in the top left corner click help> run diagnostics. On the box that comes up, check the last two things. Click next and it should identify your iPod.
2. Click on your windows start menu. Type in "services". Click on it and when it pops up, on the bottom of it click on "standard". Now Scroll down to find "Apple Mobile Device" Right click it when you see it and click on "Start". When it has started, close iTunes and replug in your iPod and it should show up.
3. Check the USB cable
4 Verify that Apple Mobile Device Support is installed
5. Restart the Apple Mobile Device Service and verify that the Apple Mobile Device USB Driver is installed.
6. If you just want to add some photos, songs and movies from computer to your devices, you can use an iTunes alternative to do the job
7. Check for third-party software conflicts.
<Link Edited By Host>

My old appleID use email with domain already deactivate. So I changed my appleID and primary email and now I can not access iCloud with iOS7. ICloud shows my old appleID but I can't change it. How do I get iCloud to work with my updated ID?

My old email that using register for apple ID cannot access/check any mail because that domain already deactivate.
So I changed my appleID and primary email and now I can not access iCloud with iOS7. ICloud shows my old appleID but I can't change it. How do I get iCloud to work with my updated ID?

Hi ccharat,
Welcome to the Apple Support Communities! It sounds like you did a good job editing your Apple ID and primary email address, but you didn’t sign out of iCloud on your iOS device before hand. What you may need to do in this situation is go back to the Apple ID website and edit your Apple ID and primary email address back to the email address that is signed in with iCloud (there is no need to verify the account after editing it back to the old account, just changing it back is enough). Once your Apple ID is back to the original account, delete the iCloud account from the iOS device and be sure to keep all info on the device when prompted. After you delete the iCloud account, go back to the website and edit your Apple ID and primary email address back to the new address. Once it is back to the account you would like, you can sign into the iCloud on the iOS device with that new account and merge all of the data when prompted. Please use the following article as a reference.
iOS 7: If you're asked for the password to your previous Apple ID when signing out of iCloud
http://support.apple.com/kb/ts5223
Change your Apple ID temporarily
If signing out and back in to iMessage or FaceTime didn't help, try these steps:
Change your Apple ID to the Apple ID you used previously. You shouldn't need to verify the email address.
Go to Settings > iCloud. Complete these steps only if the Find My [Device] setting is turned on:
Scroll down and tap Delete Account, then tap Delete to confirm.
Tap “Keep on My [Device]” or “Delete from My [Device].” In either case, your data remains in iCloud and will be updated on your device when you sign in to iCloud again.
Enter the password for your previous Apple ID.
Change your Apple ID to the new email address that you want to use. You'll need to verify the email address.
Return to Settings > iCloud and sign in with your new Apple ID.
I hope this helps,
-Joe

How to reduce CPU Utlisation while working with OLAP Cubes?

Similar Messages

Maybe you are looking for