How to reduce data usage on ipad wifi only version. consuming **** lot of data even on simple surfing of sites

how to reduce data usage on ipad wifi only version. consuming **** lot of data even on simple surfing of sites

iPhone User Guide (For iOS 4.2 and 4.3 Software)

Similar Messages

I HAVE A IPAD WIFI ONLY BUT I WANT TO KNOW HOW MUCH IS IT TO TRADE IT IN GET ANOTHER WIFI ONLY

I have a Wifi only ipad that I bought 2 years ago. The light on it does not work anymore, I want a new Ipad Wifi only but I don't know if apple still has them and how much would it be.

Apple don't do trade-ins, they will only potentially replace your iPad with one of the same generation/spec - in the US that will be $249 for the iPad 2, and $299 for the iPad 3 and 4 (and Air).
Or (and if it's offered in your country) you might be able to get something for it from Apple via their recycling programme e.g. in the US : http://www.apple.com/recycling/ .

IMessage and IPad wifi only

Hello. How I can send IMessage to IPhone with my IPad wifi only?
Thanks

From the Messages app.
http://support.apple.com/kb/HT3529

Why is my internet speed slower on my 4g iPod touch compared to my 1g iPad (Wifi only), though we use the same router?

i bought my 4g iPod touch just 3 months ago fromt the US. Internet speed was just fine and working consistently while i was using a d-link router.
my Wi-Fi network is password protected and since has not affected the speeds on my pc or my iPad (wifi only). However, just 4 weeks ago, i bought a new router, an Aztec one. That has not improved or worsened the speeds on my pc or iPad, but worsens only my iPod touch, even though it says its connected and has a full signal strength.
Here are the symptoms:-
1. iMessage is now really slow as after i click send, the loading bar at the top lags.
2. i can't go on to google or any site or app that involves internet connection e.g. Facebook, Twitter
3. I can't purchase or get apps from the App store as the searching takes way too long.
4. Now as i pull down the notifications bar, it shows temperature but no stock; i can't even access the Stocks app
5. I can see the temperature for the day on the notifications, but i cant see the details for the rest of the week like i was able to
6. I now cant read any updated emails on Mail as it takes way too long
I live in a country called Brunei, and speeds are the worst there, yet they shouldn't be this slow especialy when my friends and other devices are working.
So, what's wrong? Is it my new router?

Have you tried a simple reset of your iPod to see if that helps? To do this, press and hold both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear.
Otherwise, have you tried any of the troubleshooting mentioned in this Apple support document?
iOS: Troubleshooting Wi-Fi networks and connections
B-rock

Does iMessage works on an iPad WiFi only(no 3G)?

I´m trying to activate iMessage on an iPad Wifi only(no 3G), but it fails saying there´s a problem with my network connection, the same network i use my iPhone 4 where iMessage seems to be activated.

I´ll have to find out what´s wrong, because Safari does work. I must say its a Ad Hoc connection with my PC at work, where the network uses proxy. But navigation on Safari works fine on the iPad. I´m going into Setting - Messages - and there it asks me to put password and start the session. After sometime it says the session couldn´t be started.

How to reduce memory usage?

OK - I've read through a ton of posts that discuss the "Out of memory" problem in Encore, but what can I do to reduce memory usage?
I'm trying to produce a very simple Blu-Ray (h.264) project in Encore CS3 on Windows Vista. There are 8 or 9 timelines, a main menu, and 6 sub-menus. Each sub-menu has six static buttons. There are no transitons or motion menus. When I load the project, Task Manager says Encore is using about 1.3 GB RAM. I constantly get "out of memory" errors.
I've loaded the same project on Vista 32-bit w/ 4GB RAM and Vista 64-bit w/ 8 GB RAM. Same behavior on both.
Two questions:
1. Why does Encore need 1.3 GB RAM for such a simple project?
2. How do I reduce the memory usage?
TIA for help on the PITA,
rgames

Please check with below link, if this can help.
http://forums.creativecow.net/thread/145/863785#863796

How can I fix my mini ipad wifi?

My wifi is not working

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

How to reduce Data Manager time

Dear all,
I have a query which is showing 120 sec as Data manager time. Pls suggest the steps to reduce the Data manager time for this query.
Thanks

In this link you may find the answer to all related questions:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/90080703-4331-2a10-cd98-9c1e95acdea0?quicklink=index&overridelayout=true
Reducing data manager time can be achieved by:
- optimization of data model
- as far as possible: parallization of multi provider access
- Aggreates
Regards
Aban

How to reduce CPU usage when working in Logic Pro and Kontakt5

Hello All,
I have a MacBook Pro 15" early 2011 2.0 GHZ. My main acitivity is making music with my macbook pro. I am using Logic Pro 9 in combination with Kontakt 5.
I want to get some suggestions in the setup so I can reduce the usage of the CPU. By the way I have upgraded my system with a SSD 256GB , 16GB RAM and have removed the optical drive and installed the the previous factory set HD in the optical bay. I have placed the samples of the Kontakt 5 in the HD so I have enough space on my SSD to run the progrmas fast and smooth !
If possible give your advise on an optimum setup such as reachanaling the sounds through BUS to AUX channels and other methods in order to reduce the CPU usage. You may even post some good links where I can find more info.
Thanks in advance
Wkrgds, Levon

welshwiggle wrote:
So Center of Pan,
If you were to run something like Omnipshere on an active SI track do you get anywhere near the "1 core CPU" spike I'm getting on my Late 2011 TOTR MBP?
I still dont really get why L9 on a new MBP peforms worse than eg your PC.
Older versions of Logic (ie: 5.5) don't see individual cores, there is one disk meter and one CPU meter. In some ways it's a more efficient system. This is running on WinXP which happens to be a very good system for audio. Consider this, XP can be installed and take up only half a gig of disk space and do 90% of what most operating systems can do today.
I do see single core spikes on my single processor quad core Mac Pro. There's no way to get around a processor intensive plugin on a single track. A channel strip is tied to a single process (core). I stopped upgrading at 10.6.8 and Logic 9.1.3, because it works. I still get the occasional single core use even with multiple plugs and tracks but I can usually break the logjam by quickly starting and stopping Logic 2 or 3 times.
I will not upgrade Mac hardware or software unless the next version of Logic is outstanding, I'm fine where I'm at for the next year or two. I enjoy recording performers more than anything else so al I really need is a good sounding, solid system.

Disabled iPad - WiFi Only - MDM Unlock Possible?

We have about 100 WiFi only iPads controlled an MDM. If a use forgets their unlock pin on campus (while they are connected to our WiFI) we can use our MDM to remotely unlock the iPad. However, if the user locks themselves out at home and then brings their iPad it in a "iPad Disabled. Please connect to iTunes." state, the iPad does not reconnect to our WiFi and so our only choice is to wipe and restore. (Most of our users that get locked out do not have iTunes setup on a desktop.) Is there any setting we could use to make even a locked iPad attempt to connect to our wireless network? Being able to remotely unlock instead of wiping would save us much time and trouble. I would not mind using something else (like apple configurator) to unlock the iPad locally. I just don't want to have to have wipe as my only unlock option. This problem occurs on iOS 5 and 6.

Need more info in order to help you. Is it locked because you entered the wrong passcode too many times? This article should help. http://support.apple.com/kb/ht1212

HT1212 if my ipad wifi only was stolen can the current user restore use using recovery mode?

if my ipad mini wifi only was stolen can the current user restore use using recovery mode?
Activation lock was on before it was taken and it is registered to me

Not if the thief does not have your AppleID and passcode AND you set
a password to be entered before the screen can be unlocked.

IPad wifi only vs iPad 3G, same wifi chip or not?

Does anyone know if the wifi chip in the wifi only ipad and ipad 3g are the same? Sometimes all the radios are on one chip which might indicate a totally different chipset for the two ipads. I am having trouble with slow internet speeds on my wifi only ipad. My iPhone 4 and Core i5 iMac are on the same network and are just fine. I've tried disconnecting and reconnecting from network, forgetting network and rebuilding, ipad hard reset, airport reset....nothing seems to help. I thought maybe I could swap my wifi only model for a 3g if the wifi chip was different.

HI,
I've tried disconnecting and reconnecting from network, forgetting network and rebuilding, ipad hard reset, airport reset....nothing seems to help
Try ... Tap Settings / General / Reset / Reset Network Settings
I thought maybe I could swap my wifi only model for a 3g if the wifi chip was different.
If Resetting Network Settings doesn't make a difference, take your iPad in for service.
Carolyn

How does "Find iPhone" work for a wifi-only iPad?

My wife's iPad is in out home on a satellite internet connection, in the country, connected to our router which assigns it an internal IP address. Yet when I log into Find iPhone from my iPhone, it shows up right inside the house most of the time, within 200' or so other times. Now the "circle of uncertainty" is larger then my wife's iPhone, it's still pretty accurate given the way it's connected. This baffles me.
Thanks,
Gamma

Philly_Phan wrote:
That doesn't answer HOW the database determined the router location to begin with./message-abuse!input.jspa?objectID=28092111&objectType=2
It does – the OP is using multiple iOS devices, the iPhones have GPS which is used to submit data to Apple via the diagnostics & usage. It may also come from other iOS users who have the same feature enabled.
Philly_Phan wrote:
Drew Reece wrote:
I suspect the reason that your cellular iPad is getting accurate locations is because your modem is broadcasting a wifi access point. IP's are a poor indicator of location, despite what CSI tells you
That access point will be added to Apples database. Your iPhone has a setting that will help with this… 'Settings > General > Usage > Diagnostics & usage', if Automatically send is enabled then you are reporting anonymous data to Apple, including the location of the networks you use, the same network that is in range for the iPad. Apple is using iOS to crowd source the data.
Not true at all. A cellular iPad also has a GPS receiver and it obtains location information from GPS. GPS signals are separate from and completely unrelated to both the Internet and the cellular telephone network. GPS signals come directly from the GPS satellites. They provide signals that allow GPS receivers to calculate latitude and longitude information. Software inside the device translates latitude/longitude into landmark information, such as street addresses.
I was referring to the GPS on the iPhone.
I know how GPS works thanks, I can see 4 satellites in this hemisphere, the others are out of view
I was also assuming this was a wifi iPad (no cellular, no GPS) - hence the reason for the original poster surprise. However I may have simply read 'wife's iPad' as 'wifi iPad'?

How to reduce email size on ipad

Under Usage, email size is 52 GB, yet I have cleaned everything out. How do I reduce the size to open up available space on my iPad?

Have you tried closing the email app by double clicking the Home button and swiping the email app upwards ?
If that does not clear it, then reboot your iPad by holding the Sleep and Home buttons together until the Apple logo appears, then release both buttons and allow the iPad to restart.

100% swap, how to reduce its usage?

Hi All,
Hoping you could offer some suggestions.
RAM --> 256 GB
oracle 11.2.0.2 on RHEL 5.7
has 2 databases on this database server, with each allocated 50GB.(MEMORY_MAX_TARGET=MEMORY_TARGET=50G)
free -h
lnx133:/app/oracle/product/agent11.2:>free -g
total used free shared buffers cached
Mem: 251 34 217 0 0 31
-/+ buffers/cache: 3 248
Swap: 17 17 0
Why does this command show 34GB used for RAM? & also if RAM is available why has swap space jumped upto 100%? this started happening last week.
vmstat output is as follows
lnx133:/app/oracle/product/agent11.2:>vmstat 2 5
procs -----------memory---------- -swap -----io---- system -----cpu------
r b swpd free buff cache si so bi bo in cs us sy id wa st
0 0 18545588 228141920 140932 32580436 0 0 128 72 0 0 1 0 98 0 0
0 0 18545588 228141664 140988 32580408 0 0 0 114 1048 2809 0 0 100 0 0
0 0 18545588 228142128 140996 32580452 0 0 0 54 1010 2775 0 0 100 0 0
0 0 18545588 228141632 141036 32580420 0 0 0 84 1017 2790 0 0 100 0 0
0 0 18545588 228141728 141088 32580412 0 0 0 38 1015 2795 0 0 100 0 0
swap in/out is 0 from the output? please help me connect these dots.

l0gman wrote:
Hi All,
Hoping you could offer some suggestions.
RAM --> 256 GB
oracle 11.2.0.2 on RHEL 5.7
has 2 databases on this database server, with each allocated 50GB.(MEMORY_MAX_TARGET=MEMORY_TARGET=50G)
free -h
lnx133:/app/oracle/product/agent11.2:>free -g
total used free shared buffers cached
Mem: 251 34 217 0 0 31
-/+ buffers/cache: 3 248
Swap: 17 17 0
Why does this command show 34GB used for RAM? & also if RAM is available why has swap space jumped upto 100%? this started happening last week.
vmstat output is as follows
lnx133:/app/oracle/product/agent11.2:>vmstat 2 5
procs -----------memory---------- -swap -----io---- system -----cpu------
r b swpd free buff cache si so bi bo in cs us sy id wa st
0 0 18545588 228141920 140932 32580436 0 0 128 72 0 0 1 0 98 0 0
0 0 18545588 228141664 140988 32580408 0 0 0 114 1048 2809 0 0 100 0 0
0 0 18545588 228142128 140996 32580452 0 0 0 54 1010 2775 0 0 100 0 0
0 0 18545588 228141632 141036 32580420 0 0 0 84 1017 2790 0 0 100 0 0
0 0 18545588 228141728 141088 32580412 0 0 0 38 1015 2795 0 0 100 0 0
swap in/out is 0 from the output? please help me connect these dots.How do I ask a question on the forums?
SQL and PL/SQL FAQ
scroll down to #9 to learn how to use tags so that data column alignment is maintained.
when SI & SO rates are *ZERO* then RAM is *NOT* a bottleneck & you should calm your worries.

How to reduce data usage on ipad wifi only version. consuming **** lot of data even on simple surfing of sites

Similar Messages

Maybe you are looking for