How to reduce magic mouse sensitivity..?

I've found that my scroll on my magic mouse are way too sensitive.., anyway.., I've tried to looked after sensitivity mouse controlers at preference but I just couldn't find one.. Does anyone knows how to reduce the mouse sensitivity..??

I too have the same problem... especially when using Adobe InDesign CS5. it seems like when I only hold my hand barely above the Magic Mouse, the pages move around on the screen, or fly off the screen.
I went back to using the previous USB opitcal mouse. I like the concept of the Magic Mouse, but for design work, it just doesn't work well with InDesign or Illustrator or Photoshop.!!
I've tried adjusting the mouse preferences, but it did not make any difference.
It might be good for folks who just use Safari and email, but for designers, it seems to be a very bad idea!!

Similar Messages

Magic Mouse sensitivity in Mavericks. (solution idea)

This is beyod tollerable. I can't work with this POS mouse any more. I used to LOVE the Magic Mouse (albeit a little small) the gestures were awesome. But now, I just want to throw the stupid thing.
I use Better Touch Tool, have for years. tweeked it where I can there too, and no luck.
What would help is if there were a check box to turn off scrolling when the Mouse is in Motion.
If anyone knows how to make this a feature. PLEASE for the love of god. let us know. write a script or suggest a program that can do this.
I've notice all over the forums people having this problem. The latest OSX update did not fix this either.

This is beyod tollerable. I can't work with this POS mouse any more. I used to LOVE the Magic Mouse (albeit a little small) the gestures were awesome. But now, I just want to throw the stupid thing.
I use Better Touch Tool, have for years. tweeked it where I can there too, and no luck.
What would help is if there were a check box to turn off scrolling when the Mouse is in Motion.
If anyone knows how to make this a feature. PLEASE for the love of god. let us know. write a script or suggest a program that can do this.
I've notice all over the forums people having this problem. The latest OSX update did not fix this either.

TS3048 Magic Mouse sensitivity is extremely high

The Magic Mouse is very sensitive. So much so that I can't use it with some programs that require detail. What is the fix? I have OS X Yosemite

Hello cm23,
You don't say if you have worked your way through the Apple advice sheet here ...
http://support.apple.com/en-us/TS3048

HOW TO OPEN MAGIC MOUSE

I have a magic mouse with roller on top suddently the roller does not work only bring page up and no more up ro down what ever direction you roll the ball. I reset the mouse but does not seem to do anything. it was workin gjust fine and next morning it did not. wonder if there is a way to open it and clean up the iside??Thanks
Francois

Hello:
The mouse with a scroll wheel is not the magic mouse. However, turn the mouse upside down and run in over a plain piece of paper. If that does not help, run the scroll wheel over one of those microfiber cloths.
I would definitely NOT try to open the device.
Barry

How to run Magic Mouse under windows 8

I am trying to use my Magic Mouse under Windows 8... no luck.
before that, I was using the old Apple BT mouse... without any problems.
now windows does not recognizes the mouse.
any ideas?
Thanks

Hi,
As mentioned in the link posted by Steve, you can check the setting of Data Execution Prevention.
And according to the following blog, some hardware features that Hyper-V does not utilize and enabling them will prevent Hyper-V from loading. (If your BIOS doesn't have this hardware feature, then igonre this part)
(Hyper-V : What to
Disable in the BIOS)
Enable Hardware settings in BIOS to run Hyper V
http://blogs.technet.com/b/iftekhar/archive/2010/08/09/enable-hardware-settings-in-bios-to-run-hyper-v.aspx
Yolanda Zhu
TechNet Community Support

How? Rediscover Magic Mouse following battery replacement?

Every time I replace batteries in my Magic Mouse I've had to access System Preferences | Mouse to activate the "rediscovery" process. Fortunately, I have a USB mouse that allows me to open, and then navigate, System Preferences.
Shouldn't my iMac automatically find the Magic Mouse?
Solutions?

Shouldn't my iMac automatically find the Magic Mouse?
Yes.
Solutions?
Clicking the mouse repetitively usually works. I would also make the mouse a favorite.
Barry

Magic Mouse too responsive

The Magic Mouse is somewhat too response, i.e. it will activate a link, a check box, a menu item, etc. if the pointer hovers over these items, even if I don't click the left or right buttons. Is there a way to reduce the Mouse "sensitivity"?

Is your finger hovering just above the touch surface? If so, make a conscious effort to hold it a bit higher.
I occasionally suffer from this, and every time I notice my fingers almost touching the surface. Getting into the habit of holding them higher helps enormously...

Magic Mouse, Trackpad feature in Autocad Bootcamp

Hi, i dunno which of Magic mouse or Magic trackpad i should buy.. Well, i wanna know which one is better use with AutoCAD for windows in bootcamp.. Is magic mouse gesture work in Windows like in OSX?? And Trackpad gesture works in Windows like in OSX?? Well, I have AutoCAD for mac also but sometime i to run program which doesn't have in OSX, like Robot, MS.Project while using Autocad.. Pls tell me how to use or feature of Magic mouse and Trackpad.. Thanks in advace..

hi.
this may work for ya.
http://microvault.blogspot.com/2010/06/how-to-make-magic-mouse-work-in-windows.h tml

Magic Mouse not working in bootcamp 3.1 xp.....tried EVERYTHING!

Hopefully someone can help, have downloaded the new bootcamp drivers, magic mouse drivers...i have unpaired it in osx and tried it that way...it says it has connected to the mouse, but it still doesn't work!
Need some help PLEEEEAAAAASSSSSSEEEEEE!
Thanks

hi.
this may work for ya.
http://microvault.blogspot.com/2010/06/how-to-make-magic-mouse-work-in-windows.h tml

Magic Mouse - Bootcamp 3.1, Win XP, scrolling

Before i say problem to you. Sorry for my english. I update bootcamp to 3.1 and pair Magic mouse over bluetooth but don´t going scrolling. Please how solved the problem?

hi.
this may work for ya.
http://microvault.blogspot.com/2010/06/how-to-make-magic-mouse-work-in-windows.h tml

Sensitivity of my magic mouse

how can i improve the sensitivity of my magic mouse?

Forget the terminology of "natural" versus not. The model has chagged from "dragging a window across your document" (so that you drag down to see the bottom) to "dragging the document" (so that you drag up to see the bottom).
Whether it is "iOS-ification" or not, the industry is moving toward touch screens, physical gestures, and direct manipulation of the object (e.g., document) rather than manipulation of the intermediary (e.g., window).

How I got the Bluetooth Magic mouse and Aluminum keyboard to work in XP

NOTE: The following steps fixed my issue. I thought I would share what worked for me but I really don't ever visit these discussion groups. I used a combination of Sysinternal tools to isolate what was causing my issue and rectified it.
I couldn't for the life of me get the bluetooth magic mouse and keyboard working in a bootcamp'd windows xp. Here are the steps that I performed to finally get it to work. The assumptions are that you are running a clean XP build with SP3 and all windows updates installed.
1. Using a USB mouse and keyboard. Insert the OS X install disc into the drive and run through the bootcamp drivers install. (These steps are outlined at Page 12 in the Apple Boot Camp Installation Guide: http://manuals.info.apple.com/en/bootcampinstall-setup.pdf). Let the installers run per apple instructions in the bootcamp installation guide. At the end it will want to reboot. Reboot the system.
2. After the system reboots login and run the Apple Software Update utility to update from bootcamp 3.1 to 3.2. It will run through a bunch of installers and ask to reboot at the end. Reboot.
3. After the system reboots login and go to start=>run and type "services.msc" to bring up the services control panel.
4. Double-click the "Bluetooth Support Service" to open the properties.
5. Go to the "log on" tab and look to see what is set. If it is set to "NT Authority\LocalService" then click above it to change to "Local System account." Then click "OK." It will tell you the changes won't take effect until the service is restarted. No worries.
6. You will be back in the main services control panel. Make sure the "Bluetooth Support Service" is highlighted and look up to the left and select "restart the service."
7. Close all the open windows and then go to start=>run and type "control panel" and hit enter.
8. Double-click the "Bluetooth devices" control panel applet and follow the Apple instructions provided on Page 18 of the guide referred to earlier. Start with the mouse first. Stop when done with the mouse and don't continue on to the keyboard yet.
9. At this point my mouse was "installed" but did not show "connected" in the bluetooth devices applet. I then highlighted the mouse and clicked the "properties" button down to the right.
10. Once in the properties of the mouse I selected the "services" tab. My issue before making the switch to "Local System" account for the Bluetooth services was then when I tried to click the check box to enable "Drivers for keyboard, mice, etc (HID)" I would get an "access denied" error. Now that the switch has been made you should be able to click that check box without error. Click OK after enabling.
11. You will suddenly see systray (lower right of the screen where the clock is) saying that new hardware has been detected and enabled. Once this is all done you will see "connected" below the device in the Bluetooth applet. Give your mouse a go. It should be working now. Sweet!
12. Follow the steps in the Apple guide for your keyboard. This should work too now. Sweet!
Best of luck.

It depends on how far it is and how thick your walls are. If there plasterboard partitions and only 10 feet apart then probably.
If you have a mobile phone with bluetooth, then try sending the computer a picture of file from similar distances to that you intend using the keyboard, if it works then a bluetooth keyboard and mouse should.

How can I use my Magic mouse in a Macbook pro?

I have an iMac and I'm using the magic mouse. I just got a Macbook Pro and would like to use the mouse with this computer too.
How can I make it work in both computers?
I won't use them at the same time of course. I use one during the day, and the other at night so I'm hoping to make the mouse work in both.
Thanks in advance!!

THANK YOU SO MUCH!!!
You have been very helpful! I will try that! Thanks!!
PS: One last question, will it work if I put it in "sleep" mode or it has to be shut down?
Thanks again!

Hello Simple problem - don,t know how to solve it. With Premiere CC when I try to do a selection (click... drag... release the click) very often it stop way before the end of the move I'm swinging the Magic Mouse. I taught that the mouse clicking was de

Hello
Simple problem - don,t know how to solve it.
With Premiere CC when I try to do a selection (click... drag... release the click) very often it stop way before the end of the move I'm swinging the Magic Mouse. I taught that the mouse clicking was defective and went to get a new Magic Mouse after lots of frustration. Today, I have an edit to do it it does the SAME thing !!
I was like ????#$%?&*(???
Opened all the lights and taught I've trow the new mouse to the garbage and was using the defective mouse again... no !! - ??
Actually, the bran new mouse is doing the same thing. What I understand after investigating on the motion and watching carefully my fingers !! - is that when I click I have to keep my finger at the EXACT same place on the mouse... drag and release and it's fine. If I click by pushing on the mouse and my finder is moving of a 1/32th of a millimeter, it will release and my selection will be to redo. You can understand my frustration ! - 75$ later... same problem, but I know that if I click with about 5 pounds of pressure and trying to pass my finger through the plastic of the mouse, it you stay steady and make it !
The problem is that scrolling is enable while clicking and it bugs.
How to disable it ??
Simple question - can't find the answer !

Helllooo !?
sorry but the Magic Mouse is just useless with the new Adobe Premiere CC and since I'm not the only one but can't find answer this is really disappointing. This mouse is just fantastic and now I have to swap from a USB mouse to the Magic Mouse every times I do some editing. My USB mouse if hurting my hand somehow and I want to got back to the Magic Mouse asap. Please - for sure there is a simple solution !
Thanks !!

How come I can't use the back gesture in certain apps with my magic mouse on certain applications in Lion OS?

How come I can't use the back gesture with my magic mouse on certain applications in Lion? I figured out that in Safari i have to use a 1 finger swipe to go back a page instead of 2 fingers like i used to do in Snow Leopard. But apps like iTunes and iPhoto and i can't do that. Any ideas? is there a setting im missing to make this work? It works in Safari but not any other applications, so im assuming theres no setting for this. Just want to know if this is just a bug that will be fixed in the next update or if its something I can fix now. Any help would be appreciated because its kind of annoying. Other than this minor issue I love Lion. Full screen apps are unbelievable.

Hi.
I managed to compile open-vm-tools and the kernel module against 3.14.5 kernel. Here is the tarball with the all the files.
I still have an issue : With vmware-player 6.0.2, I can't acces my shared folder :
root@P146S011b ~ # lsmod | grep hgfs
vmhgfs 41622 0
vmw_vmci 47960 2 vmw_vsock_vmci_transport,vmhgfs
root@P146S011b ~ # vmware-hgfsclient
R
D
C
root@P146S011b ~ # mount -t vmhgfs .host:/R /mnt
Could not add entry to mtab, continuing
root@P146S011b ~ # tail -1 /etc/mtab
.host:/R /mnt vmhgfs rw,relatime 0 0
root@P146S011b ~ # cd /mnt
cd:cd:6: not a directory: /mnt
1 root@P146S011b ~ #
Forgot to add an install file with a depmod -a inside. You will have to run it by yourself

How to reduce magic mouse sensitivity..?

Similar Messages

Maybe you are looking for