How to reduce partition % for parallels

I currently have parallels running on my imac at 50% partition. How do I reduce that as I think it slows down my imacs' video capabilities. Buffering seems to take a long time compared to how it was before I installed parallels. I only use the virtual computer on the odd occassion so I don't think it needs as much memory as I gave it.

The Parallels forums are here: http://forums.parallels.com

Similar Messages

How to reduce downtime for setup table

Scenario u2013According to system data, Setup table will normally take 5 days to fill but client agreed only for max 2 days downtime. User can do change only last 3 month documents not before that. For filling 3 month data in set up table 1 day required so I have to mange options accordingly.
Datasource u2013 2LIS_13_VDITM -> DSO u2013 ZBIllIG ->Info cube
I have to Reduce Downtime for Setup table so planning following optionsu2013
1.     First run the info package for Initialization without data transfer. Then start filling setup table without blocking the User. In case Users changes any document at the time of filling setup table then these changes will move to delta queue. Once setup table filled then execute full repair request and then Delta info package.
2.     Early delta initialization u2013 no idea how to perform steps.
Please share your views with detail steps.
OLI*BW doesnu2019t have any date range in selection criteria so manually I will find out document for particular dates and use these document range.
Checked lot of post in SDN but still expecting final answer to go ahead in Production.

Hi ,
Your requirement is Billing ODS and Cube - Reset up in R/3 SYSTEM & Initialization in BW SYSTEM .
Before starting find the previous data load volume and size.
1.Go to LBWG application value=13 (Always Schedule the job in the back-ground mode)
2.Verify using tcode u2018SE16u2019 that there are NO records in u2018MC13VD0ITMSETUPu2019 table after above delete job is complete.
3.Suspend the process chain job in BW.This is to avoid it getting kicked off while the reload process is still in progress.
4.Need to check LBWQ in R/3 system for MCEX13, unprocessed Outbound queue (records). This should be empty as the last delta would have processed all.
5.Delete the initflag in BW.
6.Need to check RSA7 in R/3 SYSTEM to verify that there is NO record for 2LIS_13_VDITM    (to be done right before the Setup job).
7.Create New Info Package for Info Source '2LIS_13_VDITM' for u2018Initialize without Data Transfer Optionu2019 .Execute the package.Re-establish the Delta processing flags in R/3 and BW for the Billing TD load .
8.Save the record count for table u2018VBRPu2019 using SE16 right before the setup job.
9.Schedule Billing Data Setup Job 'OLI9BW' in R/3 SYSTEM .
10.After the Billing Setup job is complete in R/3 system, get the record count of table u2018VBRPu2019 again using u2018SE16u2019
Expeted time in R/3:5 to 7 hrs(setupjobs)
Expeted time for init and fullload : 6 hrs
ODS activation : 3hrs
Cube and with agrregates fill all : 8hrs.
Thanks,
naidu.

How to reduce opacity for form only not for controls in c#?

I want to reduce opacity for form only. Not for controls. I reduced opacity for form, but the panel opacity also reduced. I don't want to reduce panel opacity. How to do this? Give me solution in c#.

I want to reduce opacity for form only. Not for controls. I reduced opacity for form, but the panel opacity also reduced. I don't want to reduce panel opacity. How to do this? Give me solution in c#.
How do you imagine this will work? You reduce the opacity of the container but not the contents. The user is left with no way of clearing the junk off the screen. Opacity is for Forms and Forms only for a reason.
You could use multiple forms, one without controlbox/icon/text/border whatever contained inside the other, but I expect that's not your goal. What is your goal?
You can also make use of Transparency using simple background color schemes, which works even in RTL layouts.
What is your goal again, apart from taking over the screen without the ability to close the window?
Would you like to know more?

How to reduce time for replicating large tables?

Hi
Any suggestions on how to reduce the amount of time it takes to replicate a large table when it is first created?
I have a table with 150 million rows in it, and it takes forever to start the replication process even if I run it in parallel, and I cant afford the downtime.

What downtime are you referring to? The primary doesn't need to be down when you're setting up replication and you're presumably still in the process of doing the initial configuration on the replicated database, so it's not really down, it's just not up yet.
Justin

HT3777 how to undo partition for boot camp

I want to undo the partition for boot camp, we never use it and use VMware
instead. Can this be done?

So you never installed Windows natively and Fusion is not using anything other than its own image?
Some people dual boot and use VM.
http://support.apple.com/kb/HT4818
The install guide is also how to remove the partition, you do so from same utility.
http://support.apple.com/manuals/#macos
Seeing you are on 10.5.8 ? then that really goes back to 2008, too.
But G5s never supported Windows, so guess you have a different system now.

How do i partition for window vista

I have window vista operating system from 2009 it was working fine till now i had to reinstall it
when i partition the hd it will partition for window 7 automatically , when im uploading my drivers it will it dosn't work with vista
it will not load the drivers atoll popup say im not using windows 7
any suggestion??

Hi and welcome to Discussions,
you can use WinClone for this http://www.twocanoes.com/winclone/ and in here http://www.twocanoes.com/forums/viewtopic.php?t=515 you find a how-to.
(Topic: My current Windows partition is the wrong size, and I want to make it larger. How do I do this?)
Other people have used CampTune http://www.paragon-software.com/home/camptune/ successfully.
Prior to doing this you should make/have a backup of your OSX and Windows files for safety.
Regards
Stefan

How to reduce storage for iCloud and lower monthly charges?

How to reduce iCloud storage plan and lower monthly charges?

The following may help: Manage your iCloud storage - Apple Support

How to reduce cost for SAP Fiori Trial on CAL?

Hi,
I have created an account in Cloud Appliance Library with AWS as per OpenSAP Course.
It's showing the cost per hour as 3.30 USD and per month 2379.20 USD.
Can anyone suggest me how to reduce this cost per month to the minimum.
I can't pay this much amount.
Please guide how to utilize this at the optimum w.r.t to the cost.
Regards,
Ramana.

Hi Ramana,
The easiest way to optimize the costs is to suspend the instance when not used. The scheduling options in SAP CAL could help here.
Best regards,
Stanimir

How to reduce time for gather statistics for a table.

I have a table size 520 gb
Its one of the partition size is 38 gb
and total indexes of related table is 412 gb.
Server/instance details.
==========
56 cpu -> Hyper threading enable
280 gb ram
35 gb sga
27 gb buffer cache
4.5 gb shared pool size
25 gb pga
undo size 90gb
temp size 150 gb
Details :
exec dbms_stats.gather_table_stats('OWNER','TAB_NAME',PARTNAME=>'PART_NAME',CASCADE=>FALSE,ESTIMATE_PERCENT=>10,DEGREE=>30,NO_INVALIDATE=>TRUE);
when i am firing this in an ideal time when there is no load that time also is is taking 28 mins to complete.
Can anybody please reply me how can we reduce the stats gather time.
Thanks in advance,
Tapas Karmakar
Oracle DBA.

Enable tracing to see where the time is going.
parallel 30 seems optimistic - unless you have a large number of discs to support the I/O ?
you haven't limited histogram collection, and most of the time spent of histograms may be wasted time - what histograms do you really need, and how many does Oracle analyse for and then discard ?
Using a block sample may help slightly
You haven't limited the granularity of the stats collection to the partition - the default is partition plus table, so I think you're also doing a massive sample on the table after completing the partition. Is this what you want to do, or do you have an alternative strategy for generating table-level stats.
Regards
Jonathan Lewis

How large a partition for Win-based programs?

I have a 500 GB hard-drive, and plan on creating a partition to run Win XP or Win 7 and the following Win-based programs: QuickBooks Pro, Quicken '09, Family Tree Maker, Dragon Naturally Speaking, and Business Plan Pro. Any suggestions as to how large I should make this partition? It seems to me that the largest files I create on my notebook are with the OSX-based programs, suggesting a smaller partition might be adequate. Thanks.

Gerald Regan wrote:
I have a 500 GB hard-drive, and plan on creating a partition to run Win XP or Win 7 and the following Win-based programs: QuickBooks Pro, Quicken '09, Family Tree Maker, Dragon Naturally Speaking, and Business Plan Pro. Any suggestions as to how large I should make this partition? It seems to me that the largest files I create on my notebook are with the OSX-based programs, suggesting a smaller partition might be adequate. Thanks.
I think it depends on your usage of those programs and the programs running under OSX. How much data will you create and store within each partition? It will be very deficult for us to guess your usage.
I have a 500GB drive that I partitioned half and half after reviewing what my usage would be. Do an analysis of your usage and storage requirements.

How to reduce document for court filing?

I am filing in Colorado. The courts won't accept anything over 5.1. How do I reduce my documlent?

With Adobe Reader you cannot edit or change the version of a PDF file - for that you need Acrobat (which can save to a previous version of PDF using the Save As > Optimized PDF menu)

How to reduce colors for Softproof?

Hi there,
I'm far away from a Photoshop Pro and have a litte big problem.
I've some photos which i would like to print in large format.
I downloaded the ICC profile for the relevant printer/paper combo and installed it.
When i now open one of my photos and activate the Gamut Warning I can see that some of the red can not be printed.
How can i reduce the reds at the specific locations so that I can remove all Gamut Warnings?
I want the photo as close to the original image, so it's not a solution to reduce to global red in the image.
One of the photos is attached for better understanding.
I would be greatful for any helpful hint.

Rendering Intent Perceptual makes the image generally a little dull,
therefore I would use Relative Colorimetric with BPC.
The patterns/dots on the cloth don't need any correction – they will be
printed as vibrant as possible. More levels on small areas or dots are not
required. The image looks anyway somewhat artificial.
For the cheeks and eventually other parts on the skin I would use simply:
Sponge Tool > Desaturate 50% with a sufficiently large radius.
Best regards --Gernot Hoffmann

How to reduce "Wait for Log Writer"

Hi,
in a production system using MaxDB 7.6.03.07 i checked follow acitivities about Log:
Log Pages Written: 32.039
Wait for Log Writer: 31.530
the docs explains that "Wait for Log Writer", Indicates how often it was necessary to wait for a log entry to be written.
then what steps i must follow to reduce this?
thanks for any help
Clóvis

Hi,
when the log Io queue is full all user tasks who want to insert entries into the log io queue have to wait until the log entries of the queue have been written to the log volume - they are wiating for LOG Writer
First you should check the size of the LOG_IO_QUEUE Parameter.
Think about increaseing the parameter value.
Second will be to check the time for write I/O to the log -> use DB-Analyzer and activate time measurement via x_cons <DBNAME> time enable command.
Then you will get time for write I/O on the log in the DB-Analyzer log files (expert)
You will find more information about MaxDb Logging and Performance Analysis on maxdb.sap.com -> [training material|http://maxdb.sap.com/training] chapter logging and performance analysis.
Regards, Christiane

How to install windows for Parallels install in iMac?

I have an iMac. I have the program Parallels Destop 8 for Mac. I have a Windows XP Home Edition disk and a Windows Vista upgrade disk.
How do I install Windows?
I have tried from installing the Parallels program and it is saying there is not a version of Windows installed. DUH! That is what I am trying to do.
Please help. I am just trying to get a Creative Memories Scrapbooking program to work so that I can make my darn family albums! UGH!!!
Thanks to anyone who can help me out.

http://kb.parallels.com/en/4729
If you have further questions about setting up Parallels, you'll be most likely to get help if you ask in their forums:
http://forum.parallels.com/forumdisplay.php?f=58
Regards.

How to reduce prompting for "Master password"

I hope there may be a setting to address this issue...
I have a number of passwords saved for various non critical web sites such as this forum. Recently I set a "master password" to protect my saved passwords. Whenever I open a page which has text boxes for credentials which I have saved I am prompted for the master password regardless of whether I wish to authenticate to the site or not. I would like to configure Firefox to only open the saved passwords repository (for want of a batter word) when I choose to authenticate to a site.
Is this possible?
TIA,
Ken
p.s. I close Firefox (to flush cookies etc.) OFTEN so simply unlocking the saved passwords once a day and leaving Firefox running is not an answer.

Open the PrefBar Customize window via the right-click context menu of the PrefBar. 
Create a new pref check via the right-click context menu of the right pane: New > Pref Check
Enter an ID (e.g. chk_rememberSignons) and a label that appears on the PrefBar and put in the Prefstring field signon.rememberSignons to specify which pref is affected. 
Put value in the toPref and fromPref fields, that will toggle the pref between true and false and show a check-mark with the true value. 
You can assign a hotkey to that pref if you want to toggle the pref with the keyboard. 
That still works if you want to hide the PrefBar with F8 to get more screen space.
I color the check boxes with code in userChrome.css to make it easier to spot that I've changed some of them
The customization files userChrome.css (interface) and userContent.css (websites) are located in the chrome folder in the user profile folder.
*http://kb.mozillazine.org/Editing_configuration
<pre><nowiki>@namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"); /* only needed once */
#prefbar-buttons checkbox[id="prefbar:button:chk_rememberSignons"] .checkbox-check[checked="true"]
{ -moz-box-shadow: 0pt 0pt 5px rgba(153,255,51,0.8) inset, 0pt 0pt 20px rgba(153,255,51,0.8) inset !important; }</nowiki></pre>

How to reduce partition % for parallels

Similar Messages

Maybe you are looking for