How to reduce report width programatically?

Hi All,
Iam placing around 38 filelds in report and increased the report section width in Main Section to 40. Iam using formating triggers to these 38 fields.Based on the parameters passed these fields will be displayed. some times there will be only 10 fileds in the report and remaining it shows blank space.I dont want that blank space.
"Is it possible to change that report main section width programatically?"
Thanks in Advance

Hi Girish,
I don't think it will be easy to adjust report width programmatically and move controls accordingly. It will be advisable to go for matrix report with format trigger to hide blank columns.
Regards
Manoj

Similar Messages

How to reduce the width of OVS view layout

Hi All,
In ESS-Bank Information-Bank Payee field we have a OVS View UI .Can any one please let me know how to reduce the width of OVI view layout (Search Screen)
Regards
Alex

Check this [thread|restrict input field size;
Hope this helps.

How to reduce the width of Search field

HI All,
W e have a requirement to reduce the width of search help Screen for Bank Key in ESS Bank Information .Kindly please guide me how to change the width of the Search Screen.
Regards
Alexi

Check this [thread|restrict input field size;
Hope this helps.

How to reduce the width of Shuttle pane

Hi
I have create da shuttle pane but it takes too much space on a page
I want to reduce its width
I have all ready reduced its hieght
so , how can I redue its width
from any way like either from personalization or from CO?

newbie wrote:
Hi
I have create da shuttle pane but it takes too much space on a page
I want to reduce its width
I have all ready reduced its hieght
so , how can I redue its width
from any way like either from personalization or from CO?It depends on the content of the VO associated with it. You can not control it. What you can do is in your VO only you can use substr to show only some characters that can control the width of bean.
Thanks
AJ

Background job , how we set report width

Hello,
when i run a report in background, 'Background Print Parameters' window appears. Here i see various values filled default. Like a name in Spool Request -- Name. Report page -65. Report width --450.
How is Report width set = 450.
Can you please explain this to me.
regards

ok SAMANAT one more query how do 'NAME' is filled under tab 'Spool Request'.
regards
Message was edited by: Surpreet Singh Bal

How to reduce header width in portal?

Hi,
In portal, tax classification header width has increased not sure how , please let me know how to reduce it ?
component is BP_DATA , View - AccountTaxClassList, context node - Table
Below is illustration,
BEFORE
|************************
| Country
NOW
|***********************
|
| country
|
|
|

hi,
Please check .html file of your view.
Thanks and regards
Pankaj Kumar

Re: How to reduce the width of Docking Control Container

Hi All,
I created a text editor control using docking container. Its width is occupying the entire screen. I want to reduce it to half of the screen. I tried changing the values of ratio, extension and used the methods set_width to change it, but was not successful. Please let me know how can i reduce the width. Below is the code which i am using.
data: editor TYPE REF TO cl_gui_textedit,
lo_dock TYPE REF TO cl_gui_docking_container.
IF lo_dock IS INITIAL.
CREATE OBJECT lo_dock
EXPORTING
repid = sy-cprog
dynnr = sy-dynnr
ratio = 75
extension = 50
metric = cl_gui_docking_container=>metric_mm
side = cl_gui_docking_container=>dock_at_bottom
name = 'DOCK_CONT'.
IF sy-subrc 0.
MESSAGE 'Error in the Docking control' TYPE 'S'.
ENDIF.
CREATE OBJECT editor
EXPORTING
parent = lo_dock
EXCEPTIONS
error_cntl_create = 1
error_cntl_init = 2
error_cntl_link = 3
error_dp_create = 4
gui_type_not_supported = 5
OTHERS = 6.
CALL METHOD editor->set_text_as_r3table
EXPORTING
table = i_texttable
EXCEPTIONS
error_dp = 1
error_dp_create = 2
OTHERS = 3.

Hi,
Check the other exporting parameter of cl_gui_textedit's constructor.
Try using MAX_NUMBER_CHARS, WORDWRAP_MODE. Pass these paramters while creating object editor.
Regards,
Sharin.

How to Reduce Combobox width in LOV

Hi,
I have added a LOV (Combobox with List of values) to a view Column. Have added two View Criterias one for Display of Search Region and One for Fitering Combobox.
Now on Table when i click on Dropdown arrow, the dropdown width very high and i have to scroll horizontally. I want to avoid it and restrict the dropdown list box width. How can i do that?
I have tried setting up the "Show In Combobox"attribute 0f LOV to show only first one attribute but that is not helping.
Any Inputs?
Jdev Version - 11.1.1.6.2
Thanks
Rajesh

Hi,
As codigoadf said try using contentStyle by altering the width as you want
contentStyle="width: 100px"

How can I reduce the width of an Adobe Bridge web gallery in Dreamweaver?

Hi there,
I've been created a website using Dreamweaver CS4, which is nearly finished except for the photo gallery.
I have created the web gallery through Adobe bridge and exported. I then created an iframe within the dreamweaver page and specified that it fills 100% of the space (or column, which is approx 510px wide). I then inserted the index file of the gallery into the iframe though 'modify' > 'Edit tag'.
I saved and tested the webpage in a browser - the functionality worked but the gallery seems to be cropped (See attached pic).
I then tried to specify that the iframe was 510px wide, but the gallery remained at the same width and the right side of some images and the scroll bar are missing.
Does anyone know how to reduce the width of an adobe bridge web gallery to 500px wide and insert succesfully into dreamweaver??
Many thanks
Helen

The original photo gallery is:
http://www.bethanyjanedavies.com/portfolio.html
You can see that the right side is chopped off
But I may have to compromise and use:
http://www.bethanyjanedavies.com/portfolio2.html
This is a much wider page than the rest of the website, but I suppose you have to find a compromise that works!!
Cheers
Helen

Reducing the width of a sequence diagram

Does anyone know how to reduce the width of a reverse-engineered sequence diagram?
Studio sequence diagrams are very wide in relation to their height. This is because horizontal messages are separated by only small amounts, but the vertical lifelines are separated by large amounts, especially if the objects have long names and class names.
This feature causes problems when trying to export diagrams to A4 landscape pages.
In other UML editors, I could overcome this problem by arranging the objects as in two rows of "bricks" along the top of the page. The first object would be in a "normal" position. The second object was positioned high enough to partially overlap the first object. The third object was placed in the "normal" position, but partially below the second object. And so on.
This allowed the width of a sequence diagram to be reduced to almost half of its original width.
This is not possible in Studio, because:
1) The objects cannot be moved vertically.
2) Even if they could be moved vertically, they will not allow themselves to overlap another object. This is because the bounding box of the objects extends right down to the foot of the lifeline. (I don't know if "bounding box" is the correct term. I mean the box with the sizing handles.) When one object is dragged to the left so that it overlaps another object, any objects to the left of the dragged object immediately jumpfurther to the left.
Another possibility to reduce the width would be to allow the object name and class name to be on two lines. Such as:
objectName:
ClassName
This happens by default in some UML editors.

petersl wrote:
Found a better way to duplicate the sequence diagram
as a workaround for the Save As function.Great suggestion! Thanks!
Because of the estimated large amount of sequence diagrams that I need to do, your tip will save me hours of work. Even if "Save As" is implemented, it will not be much faster than your method.
Here is an interesting feature of your suggestion.
All my experimentation is done using the BankAccount tutorial. I have several "copies" of the same operation. Each copy was produced using "Reverse Engineer Operation" on the class operation in the dependency diagram. I then modified each "copy" beyond all recognition.
If I now invoke "Create Diagram from Selected Elements" on the sequence diagram interaction node for each copy, each new diagram is the same as the original reverse-engineered diagram :)
BTW, here is my non-techie solution for copying. No LOL please.
In the project file location, there are two files for each sequence diagram. For example:
mainSD_1168604900517.etld
mainSD_1168604900517.etlp
These files can be copied. However, they must be copied to file names that are registered by studio.
1) Copy the two files, using arbitrary file names.
1) Reverse engineer a new sequence diagram simply to get two more file names.
2) Rename the two copies to these new file names :)
3) In the project tree in studio, this would produce duplicate diagram names. So in the ETLP file rename the diagram using the <diagramInfo> tag.
You might wonder why I go to so much trouble to produce a copy, rather than simply reverse-engineer as many copies as I need. The answer is that on the first sequence diagram, I would like to make changes that persist in every other copy of that diagram, even after messages and lifelines are removed to split the diagram.
Compared with my method, your method will allow me to take a couple of months off, and still produce the same amount of work :)

How to increas the width of the Table in OBIEE Report

Hi ,
I am creating a OBIEE report, the report has table and 30 column in it. When I am viewing the report in an excel file , its appearing good but the width of the table is so small if I am viewing the same in internet explorer/PDF .I dont know how to increase the width of the table. Could you please sort this issue out.
Thanks
Govindan P

- you can increase the width of a column -> column format values -> Additional Formatting Options
increase the width:
- Report level:
result tab -> Click on Format container of Table -> Additional Formatting Options
u can assign value width : 500 height:.....
- dashboard level:
Edit options -> section -> Format section -> Additional Formatting Options
here also u can change the width
u can assign value width : 500 height:.....
pls mark it helps....
Edited by: 979481 on Feb 6, 2013 1:25 AM

How to change the width of PDF report

When i download an interactive report to a PDF. All the columns will have the same width, how to change the width of the column?
Thanks,
Jen

I don't think its possible for downloading from interactive report but let's see if anyone else has got a work around.
The other way to have absolute control over report layout is to create reports using 'Report Query' & 'Report Layout' under 'Shared Components'.
Regards,
Ashish Agarwal
http://www.dbcon.com

Web report for opening it takes long time how to reduce the time?

HI Experts,
I created report using webi. For next time while opening it takes more time. How to reduce the time.

Hi Manikandan,
There could be multiple reason behind the bad performance.
1. Are you using supported JVM version to run Webi reports?
2. Do the reports contain prompts? Are the LOVs set to "Automatic refresh before use"? If yes, uncheck it.
3. How many queries do the report has? Can you run the queries one by one and check which query is taking much time?
4. If it based on relational database, copy and run it against the database directly and check how much time it takes. If more, you may have to fix the issue at database level like using temporary tables, indices, etc.
5. Also check if there are firewalls or proxy server between client and server communication. if yes, try to refresh the report directly on BO server and check.
6. Check if there is any hinderance between BO server and Database server communcation.
Hope it will help.
Regards,
Yuvraj

How to reduce the coulmns width for Timesheet in ESS ?

Hi,
In ESS Timesheet, how to reduce the columns width for professional self service?
It is looking fine for weekdays, but when the user is assigned as professional self service at back end, few more sales order columns are added dynamically to timesheet for professional self service user. Now these extra coulmns are jumbled and also wide.
I tried the OSS notes 989453 in 'listviewerslim.java' , but it doesn't work. Is there any other alternative work around for this. Do I need to work at backend to solve this, If so, please let me know the work around.
Points will be awarded.
Regards,
Raj.

Dear Friend
Really need ur help as we are upgrading from 4.7 to ECC6.
Our client want to implement tiem sheet. Request you to provide gudiance wheher CATS i.e CATSRegular orESS timesheet would be useful.
if would be great if u could provide a kind of advantages adn disadvantages of both.
Suitable points would be rewarded
Sam

How do I reduce cell width with a long field name?

I'm creating an asp page, connected to an Access database.
When I create a page with, say the Dynamic Data Table "wizard," I
find that I cannot reduce the width of the data cells to anything
less than the label/field name length.
For instance, one field is "rsCities.ID" but it's only 2 or 3
digits wide. I'd like that cell in the table to be small, but I
can't figure out how to reduce it. Trying to move the resizing
handles doesn't work. Am I missing something?
Thanks in advance.
Jerry

Have you tried using Live Data view in DW?
When it's set up properly with a testing server, the Live
Data feature will
insert actual values from your database into Design View
rather than
fieldname placeholders.
Press F1 Help and search for Live Data.
Regards
John Waller

How to reduce report width programatically?

Similar Messages

Maybe you are looking for