How to reduce the video traffic for the recipient

I want to reduce Skype video traffic for myself and the other end.I am using Mac and Network Link Conditioner to limit the bandwidth to ~300kbps. It effectively reduce the Skype traffic to under 30KB per second. I am thinking if it will have the same positive effect on the other end, although that end is on a xMbps internet.

Hi techfreak, I am wondering if my bandwidth limitation will have traffic saving effect on the other end. Let's say, a video call without me applying bandwidth limit on my computer generated 30M data received/30M data sent. After I applied the bandwidth limit, the same call on my computer reduced to 10M data received/10M data sent. Will the other end see similar reduction?

Similar Messages

Is the video connector for the powermac g3 beige female or male?

i just need to know weather it is female or male so i can get a adapter for the video thanks

Not that I recommend spending more money on an old G3 than you need to, but an alternative to the on-board Macintosh video output with a VGA adapter, would be to add a PCI card if one of the 3 available slots are empty. On-board video is limited to 6MB VRAM max. You can add an ATI Radeon 7000 or 9200 PCI card to get VGA, DVI, s-video output, with support for dual monitors in extended desktop mode. If you shop around you might be able to find one for only a few times the value of the G3 itself.
http://shop.ebay.com/i.html?_nkw=ATI+Radeon+7000+PCI+Mac&_sacat=0&_odkw=ATI+Rade on+Mac&_osacat=0&_trksid=p3286.c0.m270.l1313

The Video Converter for the new

I don't know if all creative players use the same video converter but for the new ZEN I have a problem with cropping the widescreen videos. I tick the box and everything but the converter doesn't crop the video, it stays exactly the same and I have the two black lines on top and below when I play it. I can use other software to do that but the Creative Video Converter should be able to do it.

no I actually haven't but I dont know what is the problem with this one since it does give me the option to crop. On some videos it just doesn't give you the option so you know that the format is not suitable but for this one everything seemed fine.

I have a video that I created for my daughter's first birthday. The hard drive on my computer crashed and I lost the video file. The only place I have it is on my iPod Classic. How can I transfer the video from my iPod to my new hard drive?

I have a video that I created for my daughter's first birthday. The hard drive on my computer crashed and I lost the video file. The only place I have it is on my iPod Classic. How can I transfer the video from my iPod to my new hard drive?

You are in luck, Refer to this recent post by tt2, on recovering media using 3rd Party Software.
He has made a comprehensive list, browse through them and decide which suits your requirements.
Have a nice day!

IMovie appears to be picking a random frame from a project that it assigns as the Thumbnail/Poster for the final video that is shared via iMovie Theater. How does it choose this frame, and is there a way to change this? I cannot find this anywhere.

This question was posted back in 2013, and I'll having it today. Anyone know what the deal is with the system selecting a theater image with NO way to change it--better yet--has anyone figured out a way to change it? Not a clue, do you know wherethe theater files are located on a MAC?

I can't answer your first question.
The default location for the imovie Theater.theater package is in your user / Movies folder.

HT1399 Why cant I create a playlist for my music/song videos? Continuous play is also not possible in the video app on the phone!!!! previously, prior to IOS 6, it was possible to have both music videos & songs mixed in the same playlist in the music app

Why cant I create a playlist for my music/song videos? Continuous play is also not possible in the video app on the phone!!!! previously, prior to IOS 6, it was possible to have both music videos & songs mixed in the same playlist in the music app

I am back with an update. I turned off Match on both the ipad and the iphone 5. By doing so I was able to sync my Iphone and ipad to itunes and store the music on my devices rather than the slow streaming. So far this has fixed my problems with the iphone I have all my music, playlist, most of the album art and so on. But the ipad is a different story. I have the music and artist but not one playlist I am sure Apple will have an upgrade soon that will address these issues they are usually very good about this.
Now have any of you experienced another problem that has existed as long as I have used faces in Aperture.
I have over 200 faces and they are organized a-z problem is I have this going on A-Z folowed by a few that start over A-Z followed by another few A-Z and again a 4th time A-Z. Imagine how difficult it is while I am showing someone the great features of my iphone, ipad and imac. Which I do talk highly of all the time. But how do I explain that even though their name starts with a or b or what ever they are not important enough to me to be in the first list of A-Z or even the 2nd or 3rd list of A-Z someohow they are in the 4th section of the list!!!!
I have managed to get the Imac to fix this but for some reason the IOS devices do not. Any ideas?
Thanks Al

How can i transfer videos without losing the sound to my iPhone 3G?

Hi
I have bought my iPhone 3G yesterday. I have found out how to transfer music from iTunes however i can't transfer videos. I'm selecting the videos i want to transfer on the videos tab after i chose my iphone from the side menu and pressing apply. iTunes says that its syncing my iphone but it doesnt transfer the videos.
Lately i have found out a function on the advanced menu for movies as "create iphone or ipod version". When i used that it transfered that video to my iPhone however the sound was completely lost besides that action takes too much time(around 10 mins for a 3 min video and i have a pretty strong computer).
How can i transfer videos without losing the sound to my iPhone 3G?

One thing I'd recommend is that you make sure the video/audio you're trying to transfer falls within the guidelines listed in the 'Video' section here:
http://www.apple.com/iphone/specs.html
What's most likely happening is that the file is not converted as such so when you try to transfer it, it's wanting to convert it but is unable to for any number of reasons.
There's software out there that might make this easier for you but I can't recommend anything specifically.

How to use different video formats in the one timeline?

Hi everyone,
So I am in the middle of stringing together a rough cut for a surf flick/documentary shot in some remote Indonesian islands…
Things so far are going well, but I am slightly confused regarding the best way to tackle a slight issue (hopefully slight!) of video format compatibility.
The main shooting for the film was done with .mov video format and this has been imported/captured into final cut pro 7 using the correct settings, which has now formed the basis for my rough cut.
However, I did a lot of filming with some other cameras (underwater, POV etc) and so also have some crucial footage in different formats that to my knowledge will not be compatible with the timeline that I have already created in FCP.
The files are as following:
AVI
MOD
MP4
I am assuming the best way to go about things is convert all these different files into a compatible form that I can then drop straight into my existing timeline.
Unfortunately, I am just beginning to learn the more techy aspects of editing and I don’t have the first idea of how to go about doing this…?
Any helpful feedback would be greatly appreciated…
Thanks in advance,
m

Although there are kinds of standard workflows for best quality in final product, it helps to know a bit more about your setup... what is your primary format? Without knowing that, the best way forward is to convert all of your footage to Apple ProRes. Especially the MP4 stuff. There are different ways about doing that, but I personally recommend Compressor. This can take some time depending on the amount and lengths of your shots, but it is well worth the process.
Make sure you choose 48k / 16bit AIF for all of your shots that have audio. If some of your footage is 1080p and some is 720p, I personally leave that alone because when you have this type of a difference in footage, I like to set my sequence to 720p giving me the option to move or pan the 1080p clips inside of the 720p sequence. Final Cut Pro is very good at handling that difference.
Hope the edit goes well; sounds like a nice project!

How can I delete the video and keep the Audio in a few frames using Imovie 11

How can I delete the video and keep the Audio in a few frames using Imovie 11?

I've met the problem too before. but i solved it with Audio Converter Mac instead of iMovie. If you have similar situation that just want to keep audio but not video, and if your file format is not workable in iMovie, you can use the Audio Converter for help too. it can easily help to extract audio soundtrack from any video format. Or if you need to convert one audio format to another, it is a good choice too, because it supports many common audio output formats.
<Link Edited By Host>

Using the value "Image/*" for the accept attribute of the HTML input Element, how can I add .pdf to the array of preconfigured file types (.jpe, .jpg, .jpeg, .?

On a form, using the value "image/*" for the accept attribute of the HTML input Element, how can I add .pdf to the array of pre-configured file types (.jpe, .jpg, .jpeg, .gif, .png, .bmp, .ico, .svg, .svgz, .tif, .tiff, .ai, .drw, .pct, .psp, .xcf, .psd, .raw)?
Say I wanted to add .gif, .jfif or .ico. I find this array limited, how can I add types to image?
<input type="file" name="file" accept="image/*" id="file" />
mimeTypes.rdf does not seem to allow this.

''mimeTypes.rdf'' has nothing to do with web development. It's a file that stores your file handling preferences (e.g. if you want ZIP files automatically saved or opened).
You can't change the file types of the pre-defined content specifiers (audio/*, video/*, image/*), but you can specify additional MIME types. To add PDF to your above example,
<pre><nowiki><input type="file" name="file" accept="image/*,application/pdf" id="file" /></nowiki></pre>
For details, see
* [https://developer.mozilla.org/En/HTML/Element/Input developer.mozilla.org/En/HTML/Element/Input]

What are the ports required for the Audio, Video and A/V conferencing when the following end points are enabled for QoS in Lync 2013 server?

Hi All,
What are the ports required for the Audio, Video and A/V conferencing when the following clients are enabled for QoS in Lync 2013 server?
Client Type
Port range and Protocol required for Audio
Port range and Protocol required for
Video
Port range and Protocol required for
A/Vconferencing
Windows Desktop Client
Windows mobile App
Iphone
Ipad
Andriod phone
Andriod Tablet
MAC desktop client
Please advise. Many Thanks.

Out of the box, 1024-65535 for all of the client ports. :)
https://technet.microsoft.com/en-us/library/gg398833.aspx
You'll want to tune your client ports a bit
https://technet.microsoft.com/en-us/library/jj204760.aspx as seen here, and then the client ports would use those ranges which is easier to set QoS markings. I'm not sure the mobile clients respect that setting.
Elan's got the best writeup for Windows clients here:
http://www.shudnow.net/2013/02/16/enabling-qos-for-lync-server-2013-and-various-clients-part-1/
However, the marking of the packets is the tricky part. Windows can do it via Group Policy, but for the other clients you'll need to have the network specifically prioritize ports regardless of DSCP markings. You have to do it based on ports
as the traffic could be peer to peer.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications
This forum post is based upon my personal experience and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

How can I play video by touching the button on the video thumbnail ?

I have a table view in which if each cell is touched a video plays.
Each cell have image of the video cell.imageView.image. And on the image I have a button (UIButton) with play symbol.
If I touch the play button the corresponding video should be played same like the when cell is touched.
I have a selector for the play button. But how can I know that particular row is selected by touching the play button. How can I play the video when I touched the button ?
Thank You

Check the hardware acceleration mode you have set. Try to use "direct" acceleration as this will choose between GPU and CPU to render and is most compatible. The setting is in the XML file generated for the app:

<renderMode>direct</renderMode>
And no the device is absolutely not guaranteed to record compatible video at all. Browsers go by browser standards and video recording goes via manufacturer hardware and software limits, features and compatibility. It entirely depends on what you're doing with the video and the mode it is recorded in. If the user checks off the record CIF MMS compatible video and records in that it will not be visible to many browsers. Audio is almost always recorded in ultra-light mp3 or aac so that's why you hear it.
Android allows you to install many different browsers. Did you install any or set any other browser as the alternate default browser? When you run the video from a file manager you may be running an alternate, capable browser for the codec. AIR may use the native built-in browser. Also it may not load the video into a browser for playback at all as I would suspect a video would be mapped to the devices default media player and not a browser at all. Unless you're able to select the video and explicitly tell it to open in a browser I feel you're actually looking at the video in the "Video" app of your device, which will be compatible with the codec.
A simple way to check browser compatibility is to copy the video to your computer, upload it to a web server and see how it plays on various desktop browsers. If any of them have black video and only play sound, you know it's a codec issue.

Why does it take iMovie longer to import video than the length of the video? For example- it took 2 mins and 15 secs to import 2 mins and 4 secs of video...

why does it take iMovie longer to import video than the length of the video? For example- it took 2 mins and 15 secs to import 2 mins and 4 secs of video...

It's not like playing a tape. It has to convert it from whatever format you currently have into a codec suitable for editing (Apple Intermediate). This will take longer or shorter depending how compressed your original format is, and on the ability of your CPUs to catch up.
Matt

How do I find the MAC address for the time capsule?

I am trying to install 2T time capsule as my main router. Telus my internet supplier allows me to in install the MAC address for the static ip that I am going to use. But where is the MAC address on the cube or how do I get it?

On the bottom label it should list the MAC address.
If you happen to still run the original.. ie decent airport utility it has all that info right in front of you.
But you see that was before Apple reduced the airport utility to the status of a toy..
Pretty pictures no info.. think kid's book.
See very very pretty.. as a UTILITY though.. useless.

HT1539 how to get the french track for the digital download

how to get the french track for the digital download from having purchased a DVD at the store

Hi, pascalegadbois.
Thank you for the question. From your question it seems like you are looking to change the language setting for a movie downloaded via Digital Copy. If this is the case, then the instructions below will walk you through how to adjust the language settings. Also, depending on the region the video was downloaded, not all languages are supported.
iTunes: Language settings for video
http://support.apple.com/kb/HT5562
Cheers,
Jason H.

How to reduce the video traffic for the recipient

Similar Messages

Maybe you are looking for