How to reference a Planning Application in Workspace

Hello,
I've developped several Planning applications.
But when I open workspace / Applications / Planning, (with an admin user)
I only see one Planning application. So I want to know how to reference a Planning application in Workspace ??
Thanks for your help
Best regards

Some details :
My Planning applications seems to works correctly. Essbase is Okay. Shared services is okay too but the Workspace is out (and with it Financial Reporting Studio).
Before that problem, In the configurator, I've deleted all Planning clusters except one (Default). I've selected Re-associate Clusters and Applications and I've successfully re-Associate all Planning Application to Default Cluster. Then I've Activated Cluster Default.
But Anyway, Since I've deleted Planning Clusters my Workspace doesn't work anymore.
I've a doubt: I've tried to redeploy Workspace (Configurator / Hyperion Foundation / Workspace / Deploy to Application Server and Configure web Server.
It doesn't work because it says that Workspace already exists :p.
Anyway I'm surprised about something : To access Workspace we use the 19000 port but In Configuration we I try to deploy it I see it is on the 45000 port. If I click on advanced / Setup a little window open "Set up Logical Address". And it is writtend Edit Default Cluster : gl-dev-budget : 45000 meanwhile when (still in Configurator) I open Planning / Manage Planning Cluster the server port is 8300 ??
Is someone can helps me ?
Thanks
Best regards

Similar Messages

Error while creating planning application through workspace

Hi,
I am getting the following error when i am trying to create the classic planning application through workspace.
Invalid or could not find module configuration.
Required application module HyperionPlanning.AppWizard is not configured. Please contact your administrator.
Communication Error.
http://localhost:45000/HyperionPlanning/conf/HspJSConfig.xml?LOCALE_LANGUAGE=en
Please suggest me how to resolve this error. Also please share the order in which services to start.
Thanks in Advance,
Naveen Suram

Hi John,
I am facing the same issue. Reconfiguring Web server did not help. It is still not coming up and the link to planning that you have shared here is also not working. I am doing it on RHEL and facing issue with the same. Any help will be greatly appreciated. I checked the mod_jk log which has the following:
*[Tue Jan 31 20:17:01 2012] [info] ajp_send_request::jk_ajp_common.c (1186): Error connecting to the Tomcat process.*
*[Tue Jan 31 20:17:01 2012] [info] ajp_service::jk_ajp_common.c (1665): Sending request to tomcat failed, recoverable operation attempt=2*
*[Tue Jan 31 20:17:01 2012] [error] ajp_service::jk_ajp_common.c (1673): Error connecting to tomcat. Tomcat is probably not started or is listening on the wrong port. worker=Workspace failed errno = 111*
*[Tue Jan 31 20:17:01 2012] [info] jk_handler::mod_jk.c (1875): Service error=0 for worker=Workspace*
I don't know what to do now.
Thanks in advance.
Saurabh

Unable to open Planning application through Workspace

Hi All,
I have Installed and configured the Hyperion products in the following Order
->Foundation services
->Essbase server
->Essbase Administration service
->Planning
->Reporting and Analysis
->Workspace
We know that workspace is a single user interface.
After configuring, I tried to open the Planning Application through workspace but I could not able to find "*Classic Application Administration*" under Administer option of Navigate menu Kindly guide me.
Thanks and Regards
chiDam

You don't need to start downloading weblogic.
Usually the issue is that either the web server has not been configured (this is not weblogic) or the permissions are not correct in shared services e.g. the hss roles of application creator, dimension editor.
You can always try going to create a planning application directly first http://<planningmachine>:8300/HyperionPlanning/AppWizard.jsp
Cheers
John
http://john-goodwin.blogspot.com/

How to load new planning application in EPM 11.1.1.2-DIM ESSBASE ADAPTER

how to load new planning application in EPM 11.1.1.2-DIM ESSBASE ADAPTER

If you trying load metadata into planning using DIM then have a look here :- http://www.oracle.com/technology/obe/hyp_fp/DIM_Planning/OBE_Dim_Planning.html
Cheers
John
http://john-goodwin.blogspot.com/

How you refresh the planning application

how you refresh the planning application ? what is an enhanced calculation script?

Is this for an exam or interview?
Cheers
John
http://john-goodwin.blogspot.com/

Trying to access Planning application from workspace

Hi ,
I have installed UI services and i am able to login to workspace using the below URL : http://localhost:19000/workspace/.
But when i go to Navigate ---> Applications there no planning applications showing up .
I have created and registered an planning application and it was created successfull.
Please let me know how shall i proceed .
Thanks & regards,
Vijaya

This may not apply to your situation, but if you happen to be running pretty much the whole Hyperion product stack on a single, not-so-powerful computer (e.g., I run SS, Essbase, EAS server and console, BI+, Workspace, Planning, MS-IIS, and the usual assortment of desktop applications on my laptop as a sandbox environment), you may have to wait several MINUTES for the list of Planning applications to show up the first time on the menu in Workspace. The applications usually appear on the menu much faster on subsequent accesses.
As I say, this may not apply to your situation, but I thought I'd mention it as a possibility.

Unable to Access New Planning Application via Workspace

Hi all
i have installed a new Planning server into the existing platform (there is no hardware load balancing so is seen as a single instance of planning) however i am using the existing workspace and HSS.
I have successfully installed and configured the new Essbase and Planning Products and registered against shared services. The issue i have is that i cannot get the new Planning application to be viewable via workspace. I get Application is invalid.!!.
The original (Existing) Planning on server 1 is set to 'Active Instance' in the product registration and these apps can be viewed by workspace etc.
I have created Planning on Server 2 and have created a new instance, but not set the 'Active instance' in the product registration!!!, i have also registered this as the web host tier on the Server 2 not the Server1.
If i use the direct planning URL's for either Planning Server 1 or Planning Server 2 i see the planning applications that are on each server!!
Can anyone tell me what configuration i have missed out! If it helps the Planning Server 1 has its own Shared Services Project and Planning Server 2 has its own Shared Services project.
I have restarted services on Server2 BUT not Server 1 as i am not allowed an outage until the end of the month!!.

Hi,
Did you create a new Planning app in your new environment? Can you access this new app as a test?
You will need to asociated your app with an active instance and datasource.
In the workspace, when you go to Navigate - Applications - Planning, do you see your Planning app or is it not there at all?
Did you check the logs for any errors? Are you sure the user you are logging on to the Workspace as has been provisioned for that planning app?
When you configured BI+ did you make sure you ticked Planning?
Seb
www.taysols.com.au

How to sync a planning application in Dev from Prod?

Hello,
I have a planning application in Dev ("X") that is now out of date and is not synced up with the planning application in Prod ("Y"). X and Y are the same applications just the names are different in the environments.
I want to know what is the best ways to sync up the planning application "X" that is in dev with a planning application "Y" that is in production to make sure its closest to production now? What are the things that I need to keep in mind while doing this?
If I were to use LCM for this is it necessary that both the applications should have the same application and database name?
It would be really helpful if someone could suggest the best and efficient way to do so and throw some light on this topic.
Thanks,
- Krrish

I'm sure there are other ways to do this, but my preferred method is exporting the application via LCM to the file system. This will dump a series of XML files to the import_export directory.
The reason I prefer this method is that you can do a "bulk" find and replace on these files with a tool like TexRep. This means you can change the app name or database name without much trouble when moving between environments. Update the XML files with the new name and simply import them into the target app.
One important tip . . . . the app name is embedded in not only the XML files themselves, but also into the file folder names. So make sure you update these directory names as well, or you'll have issues with the import.
Another important tip . . . . make sure you don't overwrite the admin password by importing PROD Shared Services data into DEV. (I typically don't migrate things between Shared Services environments with LCM - so make sure you either exclude this from your migration, or manually remove this ID from your XML files.)
Hope this helps,
- Jake

Unable to create planning application in workspace

Hi,
i am new to system 9,and have recently installed it on my system,when i try to create a new application using the link below:
http://localhost:8300/HypeironPlanning/Appwizard.jsp
I get the below error
user must have the planning Application creator and dimension editor roles to manage applications
Any help is appreciated.

Hi,
You need to assign the user the Roles in Hyperion Shared Services,
When you provision a user > Hyperion Shared Services > Global Roles > Application Creator >
Cheers
John

Issue opening Planning application from Workspace

Applications are opening fine from regular URL but from Workspace the "Opening Application" window is running forever.
Edited by: user4551969 on Jul 23, 2009 1:44 PM

Hi,
You don't have to install EPMA if you want to use classic planning and access it through workspace.
It might be that you have not configured in the correct order, this is quite common, if you run the configurator again, select foundation > workspace > configure web server > make sure planning is selected and is the correct servername, apply and it shoudl reconfigure the apache web server.
You may need to restart the workspace services.
Cheers
John
http://john-goodwin.blogspot.com/

How to auto refresh planning application -- using ABAP Class?

Hi
I have written few planning functions and attached them in one single planning sequence. One of the planning function in this sequence is de-activate data slice checkmark in planning modeler. If I execute this planning function indiviually then it works great however when I use this function in sequence then second function in row doesnot identify changes made by first function(data slice inactivate) and thus throws errors.
At the same time, if I refresh my planning session and re-execute the planning sequence then it does works as REFRESH activates the changes done by first function (de-activate data slice).
I am wondering if there is any ABAP class that can trigger this auto refresh in background else some other method to do this auto refresh ?
Please let me know if you have any thoughts on this one.
Thanks and happy holidays
Al
Edited by: Al Gon on Dec 21, 2007 3:56 AM

Hi Al,
The planning fn to deactivate was ineffective in a sequence was because the sequence which executes the functions does it on the data in the buffer and not actually on saved data, while your deactivation would work on the data after its saved.
You could perhaps run that function separately from the others in the sequence and save the data first and then perform your "deactivation" function.
Merry Christmas
Aby

Workspace 9.3.1 Cannot Open Planning Applications

Hello,
We just moved our Hyperion / Essbase applications from one database server to another. We have debugged almost everything, except we cannot open Planning applications in Workspace. We get a dialog that says, "Opening Planning Application", and the little bar runs back and forth, but never opens the application. Planning works well. We have done the Release 9.3.1 Service Pack 1 (9.3.1.1.00) patch. Does anyone have suggestions on how to correct our problem?
Thank you,

Kevin___ wrote:
We are thinking there is a problem with IE 8 on old Workspace 9.3.1.IE8 is not supported on the base install of 9.3.1, it is supported on 9.3.3
Cheers
John
http://john-goodwin.blogspot.com/

Planning application not visible in workspace

Hi,
We have upgraded from hyperion 11.1.2.1 to 11.1.2.2. after that we are unable to see the planning application in workspace.
Any suggesstion
Thanks
Kumar

yes, applications are upgraded. We are able to access the same applications through planning link
workspace link: http://<server_name>:19000/workspace
Edited by: kumarp on Jan 23, 2013 7:14 AM

Oracle Planning gives error when trying to open application from Workspace.

Hello,
We have version 11.2.2.0.0 of Planning installed. After the install of Essbase Studio Server we have hit some issues where Planning does not seem to be available. Despite re-deploying several times and other things, we cannot connect to the Planning server.
Planning does seem to be listening
c:\Oracle\Middleware\user_projects\domains\EPMSystem\bin>netstat -na | findstr 8300
TCP    127.0.0.1:8300         0.0.0.0:0              LISTENING
TCP    155.209.11.122:8300    0.0.0.0:0              LISTENING
TCP    [::1]:8300             [::]:0                 LISTENING
but the test URL will not resolve
http://hcb-mapp156:8300/HyperionPlanning
Error 404--Not Found
When trying to open a Planning application from Workspace we see the following errors:
Description: Invalid or could not find module configuration 'HyperionPlanning.planning'.
URI: http://localhost:19000/HyperionPlanning/conf/HspJSConfig.xml
Status: 404 - Not Found
Content: text/html; charset=UTF-8
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Draft//EN">
<HTML>
<HEAD>
<TITLE>Error 404--Not Found</TITLE>
</HEAD>
<BODY bgcolor="white">
<FONT FACE=Helvetica><BR CLEAR=all>
<TABLE border=0 cellspacing=5><TR><TD><BR CLEAR=all>
<FONT FACE="Helvetica" COLOR="black" SIZE="3"><H2>Error 404--Not Found</H2>
</FONT></TD></TR>
</TABLE>
<TABLE border=0 width=100% cellpadding=10><TR><TD VALIGN=top WIDTH=100% BGCOLOR=white><FONT FACE="Courier New"><FONT FACE="Helvetica" SIZE="3"><H3>From RFC 2068 <i>Hypertext Transfer Protocol -- HTTP/1.1</i>:</H3>
</FONT><FONT FACE="Helvetica" SIZE="3"><H4>10.4.5 404 Not Found</H4>
</FONT><P><FONT FACE="Courier New">The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.</p><p>If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.</FONT></P>
</FONT></TD></TR>
</TABLE>
</BODY>
</HTML>
Hope someone can help here.
Thanks,
Philip.

Hello,
Yes, I see this error in the logs:
<Nov 12, 2013 11:09:17 AM CET> <Warning> <HTTP> <BEA-101162> <User defined listener com.sun.faces.config.ConfigureListener failed: java.lang.NullPointerException.
java.lang.NullPointerException
at com.sun.faces.config.ConfigureListener.contextDestroyed(ConfigureListener.java:241)
at weblogic.servlet.internal.EventsManager$FireContextListenerAction.run(EventsManager.java:482)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.EventsManager.notifyContextDestroyedEvent(EventsManager.java:200)
Truncated. see log file for complete stacktrace
>
<Nov 12, 2013 11:09:17 AM CET> <Error> <Deployer> <BEA-149231> <Unable to set the activation state to true for the application 'PLANNING [Version=11.1.2.0]'.
weblogic.application.ModuleException:
at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1520)
at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:484)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
Truncated. see log file for complete stacktrace
Caused By: java.lang.NullPointerException
at java.io.File.<init>(File.java:222)
at com.hyperion.hit.tool.deploy.update.util.RegistryHelper.createPhysicalWebApp(RegistryHelper.java:213)
at com.hyperion.hit.tool.deploy.update.RegistryUpdater.update(RegistryUpdater.java:30)
at com.hyperion.hit.tool.deploy.update.UniversalListener.contextInitialized(UniversalListener.java:80)
at weblogic.servlet.internal.EventsManager$FireContextListenerAction.run(EventsManager.java:481)
Truncated. see log file for complete stacktrace
Thanks.

Planning applications are not diplayed in the planning web

Hi
i have installed all products of hyperion 11.1.1.3 and my problem is iam able see the planning applications in workspace,but when i access the planning application through web i got the error like
No applications are available. please suggest me how to get applications through web.
Thanks
Ravi
Edited by: user6639 on Oct 7, 2009 11:33 AM

Hi,
Try below steps:
1. Open Planning application in workspace
2. Click "Administration" menu and click "Manage Properties".
3. Click "System Properties" tab and find "CREATOR_URL" property.
4. Copy and paste the vlaue URL of this property in a web browser and see if you still don't see the applications in a drop down
Let me know if it helps.
Cheers
RS

How to reference a Planning Application in Workspace

Similar Messages

Maybe you are looking for