How to reformat hard drive?

how do I reformat the hard drive on a Pavilion 700 with windows XP?

bumpastor,
Can I assume you meant a HP a700n.
If you are trying to perform a Recovery that would take the computer basck to the DAY ONE experience, then see:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=bph07145&lc=en&cc=us&dlc=en&product=431075
1) You will need the Recovery CD(s) for this circa 2004 computer. If you have them, OK.
2) Elsewise, here:http://www.computersurgeons.com/SearchProducts.aspx?sbt=a700n&bkm=Results#Results
Is your intent otherwise?
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

Similar Messages

  • Need help with how to reset bios and admin password to reformat hard drive in 8440p elitebook.......

    need help with how to reset bios and admin password to reformat hard drive in 8440p elitebook? removal of cmos, resetting laptop, using cccleaner, windows password recovery and hiren's was noneffective, any help is appreciated. thanks

    Hi,
    As your notebook is a business class machine, security is more stringent - the password is stored in non-volatile memory and there are no 'backdoor' passwords.  Your best option would be to contact HP regarding this.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Problem Beige G3 Reformat Hard Drive Failed

    Planning to donate computer to Charity.
    Problem:
    Inserted Disk OS 10.1 in disk drive to erase and reformat internal hard drive. OS 10 Installer appeared on monitor but just in the Menu no installer window. I could open the menus but I could not open DiskUtility or anything else. The apple menu looked like the normal Apple Menu which seemed strange the monitor screen was blue not the CD background. I restarted the Mac and it opened with the Mac icon flashing (?) so I thought I can reformat using OS 9 CD. I started the Mac with the OS 9 installation disk and it opened from the disk correctly but the curser froze in upper left corner. The Hard Drive window was open and highlighted and I could use the ADB keyboard to move up and down the list using the up or down arrow. Finally the optical mouse light went out, connected another optical mouse from another Mac the light came on. I have that mouse connected to my G4 and it works fine on this Mac. I tried to startup with TechTool Pro but it would not open at all. I connected a USB Keyboard to the USB card and could not repeat the arrow action that I could using the ADB keyboard. Now many things come to mind: Bad USB card, Operating System corrupted, Hard drive corrupted, Bad CD drive, or a 10 year old computer wearing out. My only concern is that the hard drive is a 4.1 GD drive has mostly OS and applications but some personal information like resumes and could have other personal data that was in the trash that would not empty saying that I did not have privileges. Anyone know how degauss the hard drive when erasing or reformatting fails.
    Old Jarhead

    Photogirl001:
    Welcome to Apple Discussions.
    Download the PowerMac G3 Desktop Service manual here, go to the take apart section and review the directions. Post back with questions, if any.
    cornelius

  • How come my hard drive is not showing up on the desktop?

    How come my hard drive is not showing up on the desktop?

    Those are preferences you speify from INSIDE The Finder:
    Finder > Preferences:

  • Can I recover data from a reformatted hard drive?  I did not do a back up prior to talking to Apple Support and the guy having me delete the hard drive and start anew.  My bad but is all lost??

    Can I recover data from a reformatted hard drive?  I did not complete a back up prior to talking to Apple Support and the guy having me delete the hard drive (10.5.8) and start anew (10.6.3).  My bad but is all lost?? Years of very important information....

    You will need to purchase reovery sofware such as such as FileSalvage
    http://subrosasoft.com/software/filesalvage
    You can download a demo copy that will tell you what it can recover
    If you want to recover that you must pay for the software then
    When you do the recovery, you will need another disk drive to receive the recovered files
    Having install a new operating system on the disk after the retformat is going to gradually reduce the amount of data that this software will be able to recover for you
    Allan

  • How do I find how large my Hard Drive is? Please help!

    Recently been getting messages saying that my startup disk is full. And I'm thinking about getting a Time Capsule. But the thing is, I can't find out how big my hard drive is. I clicked the apple, then About this mac, and I could only find "Memory", which was only 1 GB. I know that can't be it, because my iTunes is over 90 GB. But I can't find the hard drive. Either I'm blind, or it's not there.
    Please help
    Thanks

    Click more info in the about this mac pop up. Then under Serial-ATA. This will give you the size.
    You can also click on your drive in finder and choose Get Info. This will also let you see the size.

  • How to replace hard drive in macbook pro?

    How to replace hard drive in macbook pro?

    Hi S,
    If you have the newer unibody style, it's very easy. If it's one of the earlier models, it's considerably more difficult. Go to Apple Menu > About This Mac > More Info > Hardware and find your Model Identifier. Then go to ifixit.com, or powerbookmedic.com or macsales.com or youtube or others and there are illustrated, detailed directions. Good luck to you and post back if you have further questions.

  • How to wipe  hard drive bc selling computer and want all passwords/personal info gone? etc

    how to wipe  hard drive bc selling computer and want all passwords/personal info gone?

    You need to boot the computer from another source, e.g. a CD or an external drive. Then run Disk Utility, select the drive you want cleaned up, and run Erase. Note the security options: "write zeroes" will erase the drive completely.

  • How to install hard drive into mac pro

    how to install hard drive into mac pro

    I recently bought a new 2TB internal sata drive for my Macpro.
    The installation was easy, but I'm not sure what to do next.
    For one, should I partition the drive?
    My purpose for buying the drive was to use it as my go to drive for Parallels. I used to run my music studio on Windows based machines, and my older project files require a windows OS to recover. I installed Parallels so I can have my studio running Mac and Windows programs which will enable me to access my old project files and take them into my newer Protools system.
    So now, I've installed my new hard drive, but I'm not sure if I should partition it....And!? I'm not sure how to designate that drive for my virtual pc on Parallels. I was able to allocate enough disk space to parallels in order to load my music software, but at this point, I'm not sure if I've just promised it disk space from my original partitioned drive (which only has about 350 GB left on it).
    I would love to be able to make one internal drive available for Parallels, and the other available for the rest of my OSX. When I use Parallels, I still would like to save some extra information on the 2TB drive as well from my dekstop running OSX.
    I hope this makes sense! Your help is much appreciated!

  • How to check hard drive health

    My mac pro starts up and shuts down very slow. Anyone know how to check hard drive health?

    Normally if you have a hard drive problem it manifests itself with delays, periodic locks-ups, I/O errors, etc.during notrmal use, not just start ups and slow downs.
    Never the less, you asked how you check the health of a drive, so I'll answer.
    You can check the SMART status of your drive with Disk Utility or a free tool like smartctl in the smartmontools package. Disk Utility will typically report the SMART status of your drive as "verified" or a message associated with a type of failure right in the Disk Utility window. SMART status will be reported on most internal drives and Thunderbolt drives. More elaborate SMART information can often be obtained with newer OS versions by clicking on the "info" button. SMART is a reporting technology and will only report on errors after they occur. Many in the industry are highly critical of SMART, with a recent study by Google on hard drive problems indicating that it did a poor job indicating impending problems.
    Other tools such as Scannerz (http://scsc-online.com/Scannerz.html), TechTool Pro (http://www.micromat.com/products/techtool-pro) and Drive Genius (http://www.prosofteng.com/products/drive_genius.php) do, IMHO, a better job of testing because surface scans can detect errors not detected by SMART yet, and all three of them do those tests. Personally I like Scannerz myself because it's to the point, hardware testing oriented, and can expose other system problems like cable problems, whereas the others are more like swiss army knife tools with a lot of features that may or may not be of use to end users. Some of the people on this site will swear by these tools, whereas others will swear at them. All three of these also monitor SMART status in one way or another.
    With software tools out of the way, I'd have to agree with all previous posts, because it doesn't sound like it's probably a hard drive problem. Yes, it possibly could be, it's just that slow start ups and shutdowns are usually caused by too many apps being saved in an "on" state. Any time the system starts, it has to re-load them and resume them as best as it can, and then any time it gets shut down it must save all that information  and this all takes time. (I'm assuming Lion or newer operating system is in use). This is often the most likely cause in Lion, Mountain Lion, and Mavericks.
    There are other possibilities, but you should probably ellaborate on the problem a bit more.

  • How to find hard drives connected to router on my mac

    how to find hard drives connected to router on my mac

    Hello Thatguy1233,
    It sounds like you have a Time Machine back up of your computer that you would like to restore. You may be able to use the following article to restore that backup:
    OS X Lion: Recover your entire system
    http://support.apple.com/kb/ph4351
    Make sure your Time Machine backup disk is connected and turned on. If your backup disk is on a network, make sure your computer is on the same network.
    Choose Apple menu > Restart, and then hold down the Command (⌘) and R keys while the computer restarts.
    Select “Restore from a Time Machine Backup,” and then click Continue.
    Depending on your type of backup disk, do one of the following:
    If you use an external disk, select it and click Continue.
    If you use a Time Capsule, choose your AirPort network from the AirPort menu on the right side of the menu bar, and then select your Time Capsule and click “Connect to Remote Disk.”
    If you use a network disk, select it and click “Connect to Remote Disk.”
    If necessary, enter the name and password you use to connect to your backup disk, and then click Connect.
    Select the date and time of the backup you want to restore, and then follow the onscreen instructions.
    After you restore your system from a Time Machine backup, Time Machine may perform a full backup at the next scheduled backup time. This is normal. Time Machine resumes incremental backups after the full backup is completed.
    Thank you for using Apple Support Communities.
    Take care,
    Sterling

  • How do I reformat hard drive without affecting recovery partition?

    I would like to know how I can reformat my Toshiba hard drive without affecting the hidden recovery partition? I would like to get rid of the preinstalled Windows 7 OS and replace it with Windows XP, which is not as bloated. Also, does anyone know of a good 'free' disk scrubber program? I actually have the original 'disk scrubber' software, but the software disk just won't work any more. Finally, I tried to get the computer ready for the drive scrubbing, but I still can't change the disk order on my Toshiba laptop. I did get into the 'bios' screen by hitting the F8 key on startup, which did bring up the 'boot menu' screen. When I selected the cd/dvd drive and then hit the F10 key to save the change, nothing happened! I put in a data disk, but the laptop still booted into the Windows 7 OS. If I can't get the laptop to boot into the cd/dvd drive, I don't think that I can erase the hard drive and put Windows XP on since I wouldn't be able to boot up the laptop with the Windwos XP disk. Is that true? Anyway, without changing the boot order, I can't do anything. Please help! Thanks!

    If you use the recovery that is on the hidden partition (hold down the zero key while starting up computer) then your OS reinstall will not affect that hidden partition, just overwrite the c: drive. 
    L305-S5955, T9300 Intel Core 2 Duo, 4GB RAM, 60GB SSD, Win 7 Ultimate 64-bit

  • How do I reformat hard drive when I can't erase the disk?

    Machine: imac, OS 10.6.8
    Initial Problem: Finder kept crashing for all users immediately after start up. As a result I was unable to try trashing finder preferences as recommended in this forum and elsewhere.
    Attempted solutions:
    1. Initially seemed unable to boot from Snow Leopard Installation Disk
    2. Connected to another imac using firewire and booting problem computer into target mode
    3. Ran Techtool pro from master machine. Hard drive and hardware fine but reported need to format disk on target machine.
    4. Tried to install new os onto target drive using disk drive on master machine. Error message reported being unable to find target drive, even though it was showing on desktop of master machine
    5. Tried to erase disk using disk utility on master machine, but error message stating unable to unmount target drive
    6. Successfully rebooted using snow leopard installation disk, but unable to instal. Error message stated that the computer was not available. i.e. it had the yellow triangle with exclamation masrk
    7. Tried to erase hard drive using disk utility from installation disk, but was unable to do so. The process commenced to unmount the disk, started to erase but stopped before task completed. Tried a second time with same result.
    Obviously the machine needs complete reformatting. I made a backup before starting this series of unsuccessful attempts. I suspect that I need to use terminal from the installation disk, but I am not sure which terminal command to use.
    Can anyone tell me? Or have I overlooked some simpler solution?

    Install or Reinstall Lion/Mountain Lion from Scratch
    Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Erase the hard drive:
      1. Select Disk Utility from the main menu and click on the Continue button.
      2. After DU loads select your startup volume (usually Macintosh HD) from the
          left side list. Click on the Erase tab in the DU main window.
      3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on
            the Security button and set the Zero Data option to one-pass. Click on
          the Erase button and wait until the process has completed.
      4. Quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Install button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible
                because it is three times faster than wireless.

  • I've gotten a kernel panic 4 times in a row while trying to reinstall lion osx from a flash drive to a reformatted hard drive.  How is this possible when there's "nothing" on my computer?

    My SSD failed and I was instructed to reformat my hard drive and restore my files.  I erase my hard drive using Disk Utility and reinstalled Lion from a flash drive. While Lion is installing, I get a kernel panic.  That's happened now four times in a row and I'm befuddled because I don't have anything on my computer to conflict right?  Please help.

    eubiedoo wrote:
      Do you think it's ram related?
    No way to tell unless you test it.  Like I said kernel panics are usually hardware related.  Since your Macbook Pro is from the "2009" era, run the Hardware Test disc which you should already have - Intel-based Macs: Using Apple Hardware Test 
    Apple Store diagnostic testings are FREE.  It's the repairs you are responsible for if out of warranty. 

  • How do I sync my Iphone with my MacBook Pro with a reformatted hard drive?

    My MacBook Pro hard drive crashed. I rebooted from the Mac OS X install DVD. Now, my itunes is empty. When I tried to sync my iPhone 4, it states that it will erase everything on my phone and replace it with the items in itunes (which is empty). What do I do?

    https://discussions.apple.com/docs/DOC-3141

Maybe you are looking for

  • Webi Report on top of a BEx Report vs a Universe in BI 4.0

    Not sure if this belongs in this forum or a different one I am trying to build a report in BI 4 against a BEx report and I don't know if this is possible or not.  When I created the universe on top of the BEx report, the hierarchy levels convert to o

  • I need to automate the printing of a PDF saved to a folder...

    I'd like to attach some sort of action or script to a folder on my desktop that will allow me to save a PDF to that folder and have the PDF automatically print to a networked printer. Seems like a simple task, but I'm having a lot of trouble finding

  • Having an issue with CS6 pattern maker

    Ive been trying to get a seamess pattern usings a number of different shapes but something keeps stumping me.... I do as all the tutorial say and yet it continally produces faint lines (which i assume are the join lines?) on some of the shapes. How d

  • I want to buy iPhone 4 on-line

    hi, sorry i'm a newbie. i'm from Philippines and I want to order it abroad. i checked the website and it says iphone 4 can be sold from $199. my question is, if i want to order and ship it to Philippines, what would be the exact price? sorry, because

  • Introducing JavaStates - a new API for state based GUI development in Swing

    JavaStates partially implements the semantics of D Harel' statecharts. It is currently hosted as source forge project: [https://sourceforge.net/projects/javastates/] , and has been used for several years for teaching Java Swing and the specification