How to refresh pictures in iWeb

so I edited a picture in photoshop and instead of importing the new picture on each single page, deleting the old one and lining it all back up I just went to the published folder and replaced the image with the new one in each pages folder.
now when i "visit" website it looks perfect, with my new image and everything. but in iWeb it still shows the old image since I didn't replace the image through iWeb, now even when i close iWeb and relaunch it, it still shows the old image.
is there a way to refresh the pages in iWeb and make it show the new image?

You can't do it that way. You've not changing it in iWeb as you've found out. For a photo that you might only edit once it's not worth the effort to do it any other way but to delete the old version in iWeb and add the new one in it's place and republish.
IOT

Similar Messages

  • Pictures in iWeb albums disappeared after change location of original files

    I created many albums in iWeb by dragging albums from iPhoto. But then I noticed some pictures from my iWeb albums disappeared after the original pictures got removed to another location (or deleted). How can I tell iWeb to make a copy of the pictures in iWeb itself so my iWeb albums can stay the same even when i need to reorganize the original files on the hard drive?
    Any suggestions on how to restoring my albums in iWeb? I am having a bit headache now. Thank you very much!

    That is not normal behavior. The photos should stay in iWeb even if you delete them from iPhoto. Are you running a "referenced" library or a "managed" one?
    Click to view full size
    Managed is the default option. If you're running a reference library that may be the reason. If so contact Apple via http://www.apple.com/feedback/iweb.html and http://www.apple.com/feedback/iphoto.html.
    Unless you have a backup of your domain file predating the loss of the photos I don't know how you will recover the photos.
    OT

  • Posting pictures on iweb

    When attempting to post pictures on iweb - I hit the media browser and instead of getting a thumbnail screen for photo access - I get my iphoto over the total screen and therefore can't drag any pictures to iweb. How do I get the thumbnail screen to come up? ya - I'm just a beginner.

    If you arrange your photos in a Photos Template, this is what will happen. Clicking on a thumbnail will take them to a larger version of the same photo.

  • How much memory comes with iWeb?

    Can anyone tell me how much memory comes with iWeb 09?
    Where do I look to find this information and also how much memory I have already used.
    Trying to put a movie up and I just get an error...after much time has gone by and cannot even get up an album with only 30 pictures. Thinking maybe I have run out of Apple memory.Thanx all...Kathy

    now I can't even open up iWeb. This is the error I get when I try...
    Can't open file"~/Documents/Restored Files/Macintosh HD/Users/Kg/Library/Application Support/iWegb/Domain.sites2"

  • How to refresh the data in a container and to update the new data

    Hi,
    I have created a Module Pool Program in which i have two containers to display the long text.
    Initially this container is filled and based on some condition i want to update the text in the same conatiner.
    I am using the below two classes to do all this.
    cl_gui_textedit,
    cl_gui_custom_container,
    Could someone help me how to remove the long text in the container and update the new long text.
    I am getting the new long text but not able display it in the same container. Please someone help me how to refresh and update the container.
    Thanks in advance.

    Hi
    Try this.
      IF cl_gui_textedit  IS INITIAL.
      create control container
        CREATE OBJECT cl_gui_custom_container
           EXPORTING
                container_name = 'Container Name''
           EXCEPTIONS
                cntl_error                  = 1
                cntl_system_error           = 2
                create_error                = 3
                lifetime_error              = 4
                lifetime_dynpro_dynpro_link = 5.
    create text_edit control
        CREATE OBJECT cl_gui_textedit
           EXPORTING
                parent = cl_gui_custom_container
                wordwrap_mode = cl_gui_textedit=>wordwrap_at_windowborder
                wordwrap_to_linebreak_mode = cl_gui_textedit=>false
           EXCEPTIONS
                error_cntl_create      = 1
                error_cntl_init        = 2
                error_cntl_link        = 3
                error_dp_create        = 4
                gui_type_not_supported = 5.
      ENDIF.
    *--use method to set the text
      CALL METHOD cl_text_edit->set_text_as_stream
        EXPORTING
          text            =  t_lines ( Internal table with long text).
        EXCEPTIONS
          error_dp        = 1
          error_dp_create = 2
          OTHERS          = 3.
    regards,
    Raghu.

  • How to refresh/initialize sy-tabix in a loop?????

    Dear all,
    Please do let me know how to refresh/initialize 'sy-tabix' for every new document in a loop statement.
    Thanx in advance.
    Alok.

    Never try to refresh or initialize system variable. It shall always lead to errors in the programs. For this I have an alternative way below.
    Please declare a variable for e.g
    data: <b>l_count</b> type sy-tabix.
    Inside loop you can write the code like this:
    say for eg. you need to refresh l_count for every new material.
    Loop at itab.
    on change of itab-material.
    clear : l_count.
    endon.
    l_count = l_count + 1.
    endloop.
    Hope this clarifies your issue.
    Lakshminarayanan

  • Good morning, i would like to know how to take pictures from iphoto and put them in a folder on desktop

    Good morning: would like to know how to take pictures from my iphoto and put them in a folder on my desktop

    To take photos from iPhoto and put them onto a folder on Desktop, first create a folder on Desktop. Right-click on Desktop and create a new folder.
    Then, open iPhoto, and you have two ways to export photos:
    1. Select the photos you want to copy to Desktop with Command key (or go to Edit menu > Select All, if you want to copy all photos), and then, drag them to the folder on Desktop.
    2. Select the photos you want to copy to Desktop with Command key, go to File menu > Export, and follow the steps.
    You can choose the one you prefer

  • How to refresh XML file  from my client machine

    Hai All
    I have temp.XML and temp.XSL template in our server machine.
    when i give a print from client machine first time it gives the record,and next time it did not get refresh.Always it shows the previous records in the browser.But when i go into the server machine and click on temp.xml,it shows the current record(correct records)
    How to refresh XML file  from my client machine?
    Regards
    Dhina

    You never delete a Time Machine backup by dragging it to the Trash. You are supposed to use the TM application to manage the backups. What you will need to do now is to simply erase the drive using Disk Utility.

  • How to Refresh a WAD Template

    Hi...i have a WAD template wih 6 queries on it....i want to know how to refresh all the template ...or i have to refresh every query one by one...i try to put a command button but it appears inactive and i dont konw how to actiavte it...
    Regards

    Hi,
    Please try with CMD: REFRESH_DATA. You can find this under 'Commands for Planning Application'.
    Otherwise, you can take Action as : SCRIPT_FUNCTION and give "javascript:location.reload(true)" under Script Function.
    Regards,
    -Vj

  • How to Refresh a Page once saved to database in ADF.

    Hi,
    I created a JSF page using project template as "JSF,ADF,business components".
    There is a List of values displayed in a dropdown list,
    User can create new value and once it is saved to the database it should reflect in the list of values.But it is not displaying in the LOV and it is happening only when i close that page and open a new one.
    Can u please tell me how to refresh a page without closing the current page once save button is clicked.
    Thank you,
    Harika.

    Mini wrote:
    Hi Hari,
    Yes i have a apex page redirects from the ebs menu like you said. But for the refresh issue instead of modifying in the jsp i thought of bringing the automatic refresh for that apex page once it is loaded within apex.
    However these type of issues are sometimes get fixed by clearing browser cache or just by restarting your browser. Have you tried it?Yes i have tried, by clearing the browser cache and also by restarting the browser then too it still persist.
    Any DA action will be helpful for refreshing that page for 1sec once it is loaded. Since i dont want it to be loaded multiple times often once it is loaded.
    The refresh has to be only once if the page is loaded.
    or is it possible to Refresh the page based on the application page item through DA
    Thanks
    Brgds,
    MiniTechnically Yes, you can create a D.A. that will fire only once based on some apex page item or application item value. However this is NOT the correct solution.
    <li> When you see apex page (after clicking menu in EBS), do you see apex url in browser address bar? Can you post the URL here?
    <li> If you directly log-in to APEX (not via EBS), do you still face this issue?
    Regards,
    Hari

  • HT201528 I bought a new iMac.  How can I move my iWeb site from my old computer to my new one.  iWeb is installed on my new iMac.

    I bought a new iMac.  How can I move my iWeb site from my old computer to my new one.  iWeb is installed on my new iMac.

    iWeb stores the data in a Domain.sites2 file whose default location is shown here...
    http://www.iwebformusicians.com/iWeb/iWeb-Tips.html
    Move this to your new Mac.
    See this page for info about using iWeb with OSX 10.7 & 8...
    http://www.iwebformusicians.com/iWeb/mountain-lion.html

  • How to save picture from an iPad on someone else computer

    how to save picture from an iPad on someone else computer.

    Why don't you save pictures to Dropbox?
    You don't have to save it on someone's computer
    http://i1224.photobucket.com/albums/ee374/Diavonex/b90c9d4d.jpg

  • How to refresh after delete the records in ALV report ?

    Hi Friends,
    How to refresh after delete the records in ALV report.
    I am deleting records in ALV report .
    After successful delete the screen should refresh.
    u201C Deleted records should not appear in the screen u201C.
    Please guide me.
    Regards,
    Subash

    Hi subhash,
    FORM user_command USING r_ucomm LIKE sy-ucomm      rs_selfield TYPE slis_selfield.
    WHEN 'BACK'.
    Refresh the internal table from the ALV grid
          PERFORM update_alv_tab.
    ENDFORM.                    "user_command
    FORM update_alv_tab .
      DATA :  e_grid TYPE REF TO cl_gui_alv_grid.
      CALL FUNCTION 'GET_GLOBALS_FROM_SLVC_FULLSCR'
        IMPORTING
          e_grid = e_grid.
      CALL METHOD e_grid->check_changed_data.
      "update_alv_tab
      CALL METHOD e_grid->refresh_table_display.
    ENDFORM.                    " UPDATE_ALV_TAB
    Then see in Debug mode is it updating or not..
    Please confirm .
    And please paste the code if you can.
    Regards.

  • How to Refresh System Form in Run Time

    Dear All,
    Please give me idea for Refresh System Document in Run Time using DI,basically I am using  system columns for update for some scenarios.
    So please give solution that how should refresh system form.
    Thanks a lot.
    Ashish Singh.

    Hi,
    Please post above discussion in SDK forum.
    Thanks & Regards,
    Nagarajan

  • How-To "Refresh a table of data after inserting or deleting"

    I'd like to say a word on the how-to article "How to refresh a table of data after inserting or deleting a row using ADF".
    (http://www.oracle.com/technology/products/jdev/howtos/1013/updtable/index.html?_template=/ocom/technology/content/print)
    I spent a lot of time on it because I needed help in implementing simple CRUD functionality on a table, using JSF-ADF-TopLink technologies.
    While the the article does provide correct steps, it is in one important place not specific enough, so the reader may easily get stuck. In section "Refresh the data table", point 1: when you double click on the removeEntity() button, in Structure window, then you do not get the required dialog. You get CommandButton Properties dialog.
    You must click on the removeEntity() button in Editor's Design view. But even there you may get the CommandButton Properties dialog, not managed beans dialog.
    You may resolve that by going to JSF configuration file, faces-config.xml, and switch to Overview view. This will show you the managed beans that you have.
    Then, you may already have a backing bean for the page. You can use that and avoid creating a new managed bean.
    I could understand what the operations mean only after very careful reading of "Creating More Complex Pages", section "Overriding Declarative Methods" in JDeveloper Help (or in ADF Developer's Guide PDF document).
    In general: I believe that "ADF bindings" need more conceptual explanation, maybe in form of an article. Grammatical form "bindings" may create a false understanding that "bindings" are just references. But they are not -- ADF bindings are active objects that handle traffic between UI components and Data Controls. It seems that "bindings" even communicate among themselves. Maybe it would be more understandable to differentiate strictly between "binding objects" (or "binders"?), binding object definitions and binding object references.
    It would be very helpful to have a diagram showing grahically what specific binder objects are created in a small apllication (2-3 pages using 1-2 tables), with whom they communicate and what type of data is passed on.
    Priit

    Hi
    Thanks for your infos.
    Yes exactly I use almost the same code you have post here.
    Could You answer to my next questions?
    First - >what do you mean by saying that "it's not good idea using refreshing in IE?" Of course I use refreshing in backing_bean for my button "remove" that removes row, commit changes to database and refresh table, almost the same as You said in your post:
    Code in backing_bean is and comments on difference to Your code is below:
    public commandButton2_action1(){
    BindingContainer bindings = getBindings();
    OperationBinding operationBinding =
    bindings.getOperationBinding("removeEntity");
    Object result = operationBinding.execute();
    if (!operationBinding.getErrors().isEmpty()) {
    return null;
    //above remove entity, but I dont now if it do commit to database? So i do it below
    OperationBinding commit1 = bindings.getOperationBinding("Commit");
    commit1.execute();
    //and at the end I refresh my table, "findAllRezerwacja1 - it is an id of the methodAction, not the iterator -> is it ok? or should I change to Iterator id?
    OperationBinding requery = bindings.getOperationBinding("findAllRezerwacja1");
    requery.execute();
    return null;
    Page Definition code for this:
    <methodAction id="findAllRezerwacja1"
    InstanceName="SessionEJBLocal.dataProvider"
    DataControl="SessionEJBLocal" MethodName="findAllRezerwacja"
    RequiresUpdateModel="true" Action="999"
    ReturnName="SessionEJBLocal.methodResults.SessionEJBLocal_dataProvider_findAllRezerwacja_result"/>
    <table id="findAllRezerwacja2" IterBinding="findAllRezerwacja1Iter">
    <AttrNames>
    <Item Value="dataDo"/>
    <Item Value="dataOd"/>
    <Item Value="idRezerwacja"/>
    <Item Value="liczbaUczestnikow"/>
    <Item Value="prowadzacy"/>
    <Item Value="uwagi"/>
    </AttrNames>
    </table>
    <methodAction id="removeEntity" InstanceName="SessionEJBLocal.dataProvider"
    DataControl="SessionEJBLocal" MethodName="removeEntity"
    RequiresUpdateModel="true" Action="999">
    <NamedData NDName="entity"
    NDValue="${bindings.findAllRezerwacja2.currentRow.dataProvider}"
    NDType="java.lang.Object"/>
    </methodAction>
    <action id="Commit" IterBinding="findAllRezerwacja1Iter"
    InstanceName="SessionEJBLocal.dataProvider"
    DataControl="SessionEJBLocal" RequiresUpdateModel="true"
    Action="2"/>
    </bindings>
    //and rest of code for Iterator etc
    My second question is, why when you use refresh button in IE (I know is not recommended as You said, but sometimes user do it, so I want prevent situations that I will describe here) so when I press refresh button in IE exactly after removing one row by clicking my button, refreshing by pressing IE button is doing the same --> is deleting next row. How to stop deleting row, when for example user would press IE refresh button after pressing remove button for table. If I change selection in table after deleting row, and press refresh button in IE, instead of deleting row, I got error message: JBO-29000: JBO-35007: and
    JBO-35007. So where Im doing wrong. Maybe I should do sth with postback ? Could You help me? Thanks in advance
    Last one question: what is the difference between using delete and removeEntity from operations node? Im now reading carefully ADF Dev Guide, so I hope I can find infos there? But if You know, please answer to this question.
    Thanks

Maybe you are looking for