How to register a program in Gateway

Hi,
In my daily monitoring schedule I have found in that all teleFAX mails are in failed status( SOST) error number 816. On further analysis I have found that the RFC for the FAX server ( SAPCONNECT_FAXSERVER ) is not working,it gives that the programxxxx.sapgate is not registered.
Please let us know where we have to registered this program or any hint
Thanks
Jituda

Hi,
The registration is done from your Fax server software. Read the Fax server software documentation...
Regards,
Olivier

Similar Messages

How to register a program in satgateway?

Hello colleagues,
I am trying to test a remote function call.
steps to error:
1) sm59--> ACTIONPAD_TCPIP_J2EE
2)Press "Conenction test " button .
Now i got the below error:
Logon     Connection Error
Error Details     Error when opening an RFC connection (CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=67
Error Details     ERROR: program BTM_RTMF_NOTIFICATION not registered
Error Details     LOCATION: SAP-Gateway on host vaci<sid>.wdf.sap.corp / sapgw00
Error Details     DETAIL: TP BTM_RTMF_NOTIFICATION not registered
Error Details     COMPONENT: SAP-Gateway
Error Details     COUNTER: 20664
Error Details     MODULE: gwr3cpic.c
Error Details     LINE: 1693
Error Details     RETURN CODE: 679
Error Details     SUBRC: 0
Error Details     RELEASE: 711
Error Details     TIME: Mon Dec 13 10:16:21 2010
Error Details     VERSION: 2
In smgw i have checked the registered programs through the goto->logged clients
In the registered programs the above mentioned program is not registered. This is the reason for the error.
Solution i have tried:
Tried to register the current program using the below command
--> ./rfcexec -a BTM_RTMF_NOTIFICATION -g vaci<sid> -x sapgw00
./rfcexec: Command not found.
In the system i have seacrhed throughly as rfcexec file is not existed.
but nearly one year back i have tried this same command and executed it.
Now it is not working.. could you please provide solution to register the program in sapgateway.
Thanks and Regards,
Siva

Hi,
If BTM_RTMF_NOTIFICATION is an RFC server program, you don't have to use rfcexec.exe.
rfcexec.exe is an RFC server standard SAP exemple program. It may be used to start scripts on a distant server but it is usually a bad solution because the registration is lost after each restart of the SAP backend system.
If the RFC Server program is not able to re register automatically in cas of a SAP beckend restart, one possible solution is to install a SAP standalone Gateway on the external server and to register the RFC server program on the standalone gateway.
You, then, define the RFC destination to use the standalone gateway.
Regards,
Olivier

Registering a program on the SAP gateway

Hi All
I have to setup an interface to an external application from SAP using ALE and IDocs. The external application needs to register an instance on the SAP gateway server. If this is complete then you only need to setup an RFC connection with a programID (The ID that is used in the gateway instance) and it will allow a connection between SAP and the external application.
The problem I am having is that I dont know how to register the external application on the SAP gateway. Can anyone help me with this problem?
Thank you.

Hi,
the below blogs may help you
Program ID in RFC destination-XI
/people/michal.krawczyk2/blog/2005/03/29/configuring-the-sender-rfc-adapter--step-by-step
- Satish

How to register PROGRAM ID and use it in SM59, then see it in SMGW

Hi guys,
I want to build a RFC connection, it has 2 sides, first in SAP and 2nd in .Net .
In SAP side as far as I know I have to create a RFC Destination in SM59 with Type T (TCP/IP Connection).
It wants a Program ID in Technical settings when you choose "registered server program".
I read a lot forums but still I have problem that "what is a registered program and how can I create it".
Thanks guys

Dear Farzin
To build such a connection, you need to follow the below steps in order:-
i) External system (.NET) registers program in gateway
ii) View in SMGW that the program is registered
iii) Create in SM59 new RFC type T
You can also refer to my answer in the following thread:
RFC Destination TCP/IP - IDoc to Third Party in ECC
I am not familiar with .NET programming, so not sure what needs to be done on that side for step i, but you should be able to search for more details. One of my search result points to the following which might be suitable:-
Build an RFC Server with NCo 3.0 – A Step-By-Step Guide | SAP Experts:Consulting &amp; Integration - DataXstream
Once you complete all the steps, you can test the new RFC connection in SM59 to see if it works before you try out the function module.
Rgds
Eng Swee

How to register a report program ins EBS?

HI,
I made a new report program called APVOUCHER.rdf it is developed/tested/ and running on Reports 10g windows. Then I ftp it to my EBS R12 linux server. Then I put it under the base path of $AP_TOP/reports/us.
Then I register it in EBS using this
a) Define the concurrent program executable with the Oracle Application Object Library. This links the execution file and the method used to execute it with a defined concurrent program. Log into Applications as the System Administrator and navigate to Concurrent > Program > Executable
b) Define the concurrent program with the Oracle Application Object Library along with any program parameters or any incompatibilities. Log into Applications as the System Administrator and navigate to
Concurrent > Program > Define.
But in the 2nd define the program APVOUCHER ca not me found in LOVs provided under region
Excutable
Name>
Method>
If I click LOV for Name the report name is not in there :(
Anything I miss in here?
Thanks a lot

Hi,
Before you define the report, navigate to Concurrent > Program > Executable and fill out the form as follows:
Executable: <REPORT SHORT NAME> --> (Similar to the report name you have uploaded but without .rdf)
Short Name: <REPORT SHORT NAME> --> (Same as above)
Application: Payables
Description: <Description>
Execution Method: Oracle Reports
For more details, please refer to:
Note: 133991.1 - How to Register a Custom Report
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=133991.1
Once you are done with the above, you need to add this concurrent program to the Request Group which is attached to your responsibility.
- Login to System Administrator responsibility
- Navigate to Security > Responsibility > Define
- Query the Responsibility Name
- Write down the Request Group
- Navigate to Security > Responsibility > Request
- Query the Request Group
- Add the concurrent program
You should be able to see the concurrent program from the responsibility then.
Regards,
Hussein

How to register a new MacBook using info I entered in the startup program?

I just opened my new MacBook for the first time and the startup program walked me through entering a bunch of information and connecting to my old iBook to transfer data. And the end of the process it tried to register me with Apple but my internet connection was down and it told me I couldn't register now. It left me instructions for how to register later using the info I already typed in. I did not write down these instructions. Instead I clicked 'continue' and lost them forever.
Does anyone know how to register after the startup program has quit? I found register.apple.com but it requires me to re-enter all my data. Ignoring from the fact that I've spent more time typing this question than I would have re-typing my name and address, it bugs me that I can't find the menu or dialog box that I could swear the startup program told me to use to send my saved info.
Any advice?
Thanks

Usually there's a shortcut in your new user's Home folder called "Register with Apple" (or something similar to that) of the original registration fails. To open your user's Home folder, press Apple-shift-H from the Desktop. Can you see the shortcut there?
Just so you know, you don't need to register to receive any technical support or warranty support from Apple. Registering with Apple, I believe, helps their Marketing Department, but you don't need to register for support or help.
-Doug

How can I communicate PXI-6509 by Static DIO Register-Level Programming?

- How can I communicate PXI-6509 by Static DIO Register-Level Programming?
PXI-6509 physically Port0 is connected to Port1.
For checking all connections are correct for this case so I have used DAQmx Test Panel. Just in case everything is ok.
  In this case I interested in to communicate the PXI6509 by Register-Level Programming.
I have tried to use Open VISA Test Panel for sending and reading data (in MAX explorer) and
use NI-Spy for checking communication data.
The first step I configured Port0 to Outputs state and Port1 to Inputs state.
The second step I setup Port0 to 0xAA.
  The third step I read back Port1 and expected data will be 0xAA but just only 0x0. Why???
   1              ViOut8(0x03D83318, 10, 0x00000041, 1)

Hello!
We don't do support on register-level programming but the problem you are experiencing might be due to tri-state on the ports?
Please check this manual that covers register programming of the device you are using:
http://digital.ni.com/manuals.nsf/websearch/47300C3471742AD0862570AE005E0AD1
Regards,
Jimmie Adolph
Systems Engineer Manager, National Instruments Northern Region
Bring Me The Horizon - Sempiternal

How to do register-level programming for NI6025E when I want to acquire single scan incuding multiple input channels?

How to do register-level programming for NI6025E when I want to acquire single scan incuding multiple input channels?

Thanks, Alan, I think I indeed need to combine aiex1.cpp and aiex2.cpp. I made a change to Configure_Board of aiex1.cpp as follows:
//Call this function to configure board options.
void Configure_Board(tSTC *theSTC,tESeries *board)
//Clear configuration memory
theSTC->Write_Strobe_0.writeRegister(0x0001);
//Clear ADC FIFO
theSTC->Write_Strobe_1.writeRegister(0x0001);
//Writing to Config_Memory_High_Register for channel 1 settings
board->ConfigFifoHigh.setChannel(0);
board->ConfigFifoHigh.setBank(0);
board->ConfigFifoHigh.setChannelType(board->ConfigFifoHigh.kChannelTypeRSE);
board->ConfigFifoHigh.flush();
//Writing to Config_Memory_Low_Register for following channel 1 settings
board->ConfigFifoLow.setLastChannel(0);
board->ConfigFifoLow.setGeneralTrigger(0);
board->ConfigFifoLow.setGain(board->ConfigFifoLow.kGain001_0);
board->ConfigFifoLow.setPolarity(board->ConfigFifoLow.kPolarityBipolar);
board->ConfigFifoLow.setDither(0);
board->ConfigFifoLow.flush();
//Writing to Config_Memory_High_Register for following channel 0 settings
board->ConfigFifoHigh.setChannel(1);
board->ConfigFifoHigh.setBank(0);
board->ConfigFifoHigh.setChannelType(board->ConfigFifoHigh.kChannelTypeRSE);//RSE mode
board->ConfigFifoHigh.flush();
//Writing to Config_Memory_Low_Register for following channel 0 settings
board->ConfigFifoLow.setLastChannel(1);
board->ConfigFifoLow.setGeneralTrigger(0);
board->ConfigFifoLow.setGain(board->ConfigFifoLow.kGain001_0);
board->ConfigFifoLow.setPolarity(board->ConfigFifoLow.kPolarityBipolar);//BIPOLAR
board->ConfigFifoLow.setDither(0);
board->ConfigFifoLow.flush();
return;
and a change to test(iBus *bus):
do
  uStatus = theSTC->AI_Status_1.readRegister();
  if (!((uStatus & 0x1000) == 0x1000))
  uValue[i] = board->AIFifoData.readRegister();
   i++;
} while(i<1);
printf("Value %d is %6.2f\n",0,FindADDouble(uValue[0]));
printf("Value %d is %6.2f\n",1,FindADDouble(uValue[1]));
but it doesn't work, why?
How shoud I do?

Creating RFC dest'n for Registered Server Program

Hi,
I want to create a create a RFC destination for RFC Sender adapter. I am consulting this weblog:
/people/michal.krawczyk2/blog/2005/03/29/configuring-the-sender-rfc-adapter--step-by-step
However, i dont know what will be the Program ID and GatewayHost.... Please let me know how they are configured?
Regards,
Arpil

Program id can be any name thats unique and given while u select registered server program in sm 59 (while u create rfc destination of type TCP/IP)also its case sensitive, and should be same in both the RFC destination and your RFC adapter.
and gateway host has to be ur own application system not of XI ,(as specified in Michals blog) .
TCODE : SMGW -> Goto-> Parameters -> Display
Regards,
Pratibha

Issue in Registered Server Program RFC in ERP

Hello Experts,
I need suggestion on one problem we are facing.
From ERP we have 3 application which uses Synchronous message call to PI system from where the call is sent to a mainframe system and returned.
All these 3 applications uses a registered server program XXX_TCP_YY RFC call to connect to PI system.
In this RFC XXX_TCP_YY the gateway host is mentioned as ERP system and there is a communication channel in PI where this RFC details are maintained.
After upgrading our ERP 6.0 to EHP 5 we are continuously getting issues with message flow to PI or call to PI is failing and this RFC is taking long time or sometime timing out.
In such cases since it production i go a restart the channel in PI and this RFC start working fine.
But i am not sure how to resolve this issue.
Can you please provide some pointer in which direction i should investigate this problem.
Regards
Ajay Sandal

Hi Ajay,
Can you check the PI Communication polling interval and whether this restart needed on all the apps or just CI?
In addition to polling interval please check the SeeBurger services from /nwa and see if the needed on are active.
Before restarting the channel, clear the cache using full mode too.
Check this forum link: all Communication Channels stopped or startet when restart of the SAP-PI
Regards,
Ashutosh
Edited by: Ashutosh.Pandey on Jan 11, 2012 9:21 PM

How to register the recipient when create job by function

I am now use JOB_OPEN , JOB_SUBMIT and JOB_CLOSE to create a job in the program. And need to post the result of the report to the person by email.
Can you tell me how to register the recipient when create the job.
( in sm36, it is easily to do but how to do in coding? )
regards,
slam

Hi
I think in Back ground using the above fun modules you can't send a mail to the receipient.
see the use of the above fun modules;
IF p_bjob = 'X'.
    CONCATENATE sy-cprog sy-datum sy-uzeit
                INTO jobname SEPARATED BY '_'.
    CALL FUNCTION 'JOB_OPEN'
      EXPORTING
        jobname          = jobname
      IMPORTING
        jobcount         = jobcount
      EXCEPTIONS
        cant_create_job = 1
        invalid_job_data = 2
        jobname_missing = 3
        OTHERS           = 4.
    CALL FUNCTION 'GET_PRINT_PARAMETERS'
      IMPORTING
        out_archive_parameters = arc_params
        out_parameters         = print_params
        valid                  = valid
      EXCEPTIONS
        archive_info_not_found = 1
        invalid_print_params   = 2
        invalid_archive_params = 3
        OTHERS                 = 4.
    IF valid = chk.
      SUBMIT ybrep
                      WITH < sel Screen>
                      AND RETURN
                      USER               sy-uname
                      VIA JOB            jobname
                      NUMBER             jobcount
                      TO SAP-SPOOL
                      SPOOL PARAMETERS   print_params
                      ARCHIVE PARAMETERS arc_params
                      WITHOUT SPOOL DYNPRO.
      CALL FUNCTION 'JOB_CLOSE'
        EXPORTING
          jobcount             = jobcount
          jobname              = jobname
          strtimmed            = 'X'
        EXCEPTIONS
          cant_start_immediate = 1
          invalid_startdate    = 2
          jobname_missing      = 3
          job_close_failed     = 4
          job_nosteps          = 5
          job_notex            = 6
          lock_failed          = 7
          invalid_target       = 8
          OTHERS               = 9.
      IF sy-subrc <> 0.
       MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
               WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ELSE.
        MESSAGE i029 WITH jobname.
      ENDIF.
    ELSE.
      MESSAGE s000 WITH text-003.
      STOP.
    ENDIF.
ENDIF.
Reward points if useful
Regards
Anji

Registered Server Program not being registered?

Hi,
first of all, I'm an ABAPer, not a Basis guy, so i apologize if i'm not giving all the info required to solve this issue.
We have a program that's scheduled to run every morning at 4am. This program calls an RFC to XI and sends data to an external SQL database.
it seems that EVERY Sunday, after full backups, the initial run of this program fails. If it fails, the job is run up to 3 more times. Almost 100% of the time, one of the successive runs works.
And when I say a successive run works, I mean a duplicate job that's been kicked off, literally less than 1 minute later, will run fine.
Also, the job will sporadically fail during the week on its first run, yet successive runs will work.
it seems to me that there is a problem registering the program that my ABAP program calls.
any ideas on what I ask my basis/XI team to check for?
points will be awarded.
thanks,
rp.

here's what we could find
M Thu Sep 6 04:04:38 2007
M
M *****************************************************************************
M *
M * LOCATION    SAP-Gateway on host hrxxx.valero.com / sapgw45
M * ERROR       program RFC2XMBSERVICE_HR2XIP not registered    <-------- error here!
M *
M * TIME        Thu Sep 6 04:04:38 2007
M * RELEASE     700
M * COMPONENT   SAP-Gateway
M * VERSION     2
M * RC          679
M * MODULE      gwr3cpic.c
M * LINE        1694
M * DETAIL      TP RFC2XMBSERVICE_HR2XIP not registered
M * COUNTER     239
M *
M *****************************************************************************
M
A RFC 1485 CONVID 80501535
A   * CMRC=2 DATA=0 STATUS=0 SAPRC=679 ThSAPOCMINIT
A RFC> ABAP Programm: ZHRO_FLEX_ONLINE (Transaction: )
A RFC> User: SAPHR (Client: 120)
A RFC> Destination: RFC2XMBSERVICE_HR2XIP (handle: 1, , )
A *** ERROR => RFC ======> CPIC-CALL: 'ThSAPOCMINIT'
Transaction program not registered
[abrfcio.c    8065]
We don't understand why this program fails to register itself a few times per week.

How to register a custom plsql code

Hi
i have wrritten a custom plsql code for my Overtime entries validation for payroll processing.
Can any body tell me how to register it in application.
Secondly i want to get the output file generated by report submission on my desktop.i want to know where the report output files for HR and payroll are stored so that i can get them through FTP.
Regards

if you want to integrate your plsql into a fast formula, please download the fast formula guide from metalink. Or ask your functional payroll consultant.
All reports and processes in Oracle Apps are handled via concurrent programs and requests. When a concurrent request is finished, click on the output button, and depending from the filetype, your browser will take action.
All concurrent output is also stored on the concurrent server. Ask your apps dba where she mapped the concurrent output directory. But i do not see why you should need this.

How to register DI RfcSvr as an Windows service

Every time I must manully start DI RfcSvr program on windows. I want to know how to register it as a Windows service?
I try to run below command:
ntscmgr install SAPRFCService -b "D:\Business Objects\BusinessObjects Data Services\bin\rfcsvr.exe" -p "-a DI_SOURCE -g HOST_NAME -x gateway_name"
It successfully register the command to NT service but It can not start. The error message in Event Manager is:
Event ID 7009, Timeout (30000 milliseconds) waiting for the SAPRFCService service to connect. I though this is caused by no return code returned by program rfcsvr.exe.
Anybody has good idea?
TIA

Hi,
I'm in the same situation, I need to know if it's possible to record DI RFCSVR as a Windows service or not.
When I try to start the service, I get the same error
Event ID 7009, Time (30000 milliseconds) waiting for <name Service> of service to connect.
I have searched without success guides.
Any suggestions.

How to register Package in oracle apps?

Hi All
How to register package in oracle apps?
If package contains 3 procedure, i want to call 2nd procedure of the package when i submit the concurrent program in srs window.. Can any one give the registration for the same

To add to Gyan's comment:
Go to system adminstration responsibility
Create a conc. executable. Select execution method as pl/sql stored program and then enter your second procedure name as follows
package_name.procedure_name.
Then create conc. program that uses the above executable.
Add the program to a request group.
Add the request group to a responsibility.
Now you will be able to run your procedure.
Hope this helps,
Sandeep Gandhi

How to register a program in Gateway

Similar Messages

Maybe you are looking for