How To Register Adobe As A Trusted Publisher to Microsoft Access 2007

Hello:
I am a Microsoft Access developer, and I recently wrote an application that opens PDF documents from within Microsoft Access. The documents are opened using Adobe Reader. Every time it opens a document, I receive a security warning. I am using the Hyperlink Method from within VBA. In the Microsoft Access 2007 Trust center, Adobe is not on the "Trusted Publisher" list. Does anyone know how to make Adobe a trusted publisher? From within Access, there does not seem to be a way to "Add Trusted Publisher". It all has to do with Security Certificates.
Thanks,
Rich Locus

Isn't it up to Microsoft to tell you how to make a program a trusted publisher for Access?

Similar Messages

How to register adobe media encoder cs6

Please anyone could explain to me how to register Adobe Media Encoder CS6. When I installed the new AP 10. I began to prepare my presentation and when I tried to import a video from my hard drive to a slide. It prompt a message Thanks for using AP 10. The product you have installed have not been registered yet. ....
Thanks in advance

El 25-08-2014, a las 2:05, Jay13 <[email protected]> escribió:
How to register adobe media encoder cs6
created by Jay13 in Adobe Presenter - View the full discussion
Hi terapaca,
Is your AP 10 licensed? if not can you please License it and then Check.
If it is licensed and still you are getting the same issue then please do the following.
Please provide us with the Screen shot of the prompt and "oobelib.log" file.
The location of "oobelib.log" is :-
If you are using windows:
C:\Users\<User name >\AppData\Local\Temp
OR
just open the run the window and type %TEMP%
For Mac
/Users/<user name>/Library/Logs
Please provide the above files so that we can look into the issues soon.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6670470#6670470
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Adobe Presenter by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Adobe does not recognize footers in Microsoft Word 2007 to PDF

I have copied and pasted the details, below, from a previous message I have sent out to an assistive technology listserv.
I am encountering this problem with various builds and versions of Adobe Acrobat:
Acrobat X on a Windows Vista 64-bit build (note that this is the best Acrobat I can install on Windows Vista, Adobe Reader XI is not even supported)
Acrobat X on a Windows XP build, sorry, do not know the bit count (it is my work computer so I can't upgrade anything)
Acrobat 9 on a Windows 7 64-bit build.
I have also encountered and checked into whether or not the PDF reads (and does what I want it to) in JAWS 14, latest update (Feb 2013). We encounter the same problem with JAWS and this morning found out that there is a conversion error between Word and Adobe. (See this post, where the ---- are).
Summary, I have spoken with JAWS, put out a support ticket with NVDA via e-mail, spoken with Microsoft, and tried to communicate with Adobe about this issue for help and Adobe is refusing to help. The other places tried everything they knew but they could not get it to work. I even tried to strip all the page numbers from Word and number using Adobe's page numbering feature, but that was not successful either because I cannot use Roman numerals.
I would appreciate any feedback the Adobe Forums can give me; please note that I cannot post a sample document at this time as the only document I have is a private work document (cannot share those by policy, so I will have to make up a fake document if I get the time and energy).
Thank you very much for your time and expertise. The pertient info is above and below in "Original Message" and "Activities section" - the other information is there if you'd like to look. And to provide feedback to Adobe about things I think they could improve, since they will not let me email them directly.
----Original Message----
My question concerns the reading of Footers / Headers in Microsoft Word 2007 and Adobe Acrobat (headers/footers designed in Microsoft Word 2007 and then converted to PDF with "Bookmark" checked in Adobe Acrobat conversion settings).
The document is a word document containing 50+ pages. There are 12 pages of "front matter" that are marked with Roman numerals. Subsequently, the body text of the document has an Arabic number (1, 2, 3, 4, etc.) in the bottom right corner. Footers are used properly in the document. All Table of Contents links, which do link to both headings in the "front matter" and to headings in the body text, are picked up properly. Literately, the only thing not reading on the document are page numbers (the Word Status bar is reading its page numbers, but the page numbers in the footer are not reading).
I then need to convert the document to Adobe Acrobat PDF. Granted, I have a full copy of Adobe Acrobat X available to me, and my various assistive technologies have always functioned better when opened directly in Acrobat (rather than Adobe Reader). So, I set the accessibility options (from Word) properly, asking it to bookmark Headers and Footers as appropriate, thinking that this will pick up the page numbers and make them read as the bottom right corner of my PDF.
All links work in Adobe to navigate by section/heading. All figures are alt tagged. Everything is perfect - but the one thing that NVDA won't read are the page numbers. Visually, the page numbers are there on the document, but NVDA won't pick them up. Additionally, I also changed the appropriate page numbers in Adobe (Page Thumbnail Pane, on the Navigation Pane I believe it is called) - to reflect the section where it is Roman numerals and Arabic numerals. This did not help, and for what it is worth, I cannot get NVDA to voice when I am in this pane, so I don't seem to have a chance of getting the page number info from there.
NVDA reads the document just fine except for the above-mentioned snare. However, when it reads, it will go to the next page, and say, "Page 2 of 54, (page text), Page 3 of 54 (page text)," etc. when I will need it to say Page ii of 54 (page text), Page iii of 54 (page text)," and so on, changing to "Page 1" when the Arabic numbers are used.
I know that the Page Label issue is part of Adobe's issue, with them not releasing the PageLabel aspect. (I have looked through some NVDA tickets). I do not know how to put a "changeset" into my copy of NVDA though, or even if it would help (I have no computer scripting skill). The easy answer would be to upgrade to Adobe Reader XI and see if that helps, but I don't have the ability to put it on every computer I use, and *I need this file to read consistently across multiple versions of Adobe* (including Adobe Reader/Acrobat 9, X, and XI). (This file is also going out to people who may not have the latest version of Adobe, but are also running some copy of NVDA, either a portable or a full install).
Is there any way to pick up the Footers with page numbers voicing in NVDA, and/or have it read the user-editable page number box that is on Adobe's Toolbar (next to the 1 of 54 parentheses). This user-editable box, to jump to page numbers, reflects the Roman numerals I have loaded into the pages of Adobe. When I press Ctrl+Shift+N in Adobe, I can also go to the appropriate page (if I type in iii, it will take me to iii, if I type in 34, it will take me to the Arabic number 34 -- NOT the 34 of 54, which would land me on a different page. And I want to land on the page that has the Arabic 34, so that's functioning fine.
I just need the page numbers in the footer to voice, "Page iii," or "Page iv," or "Page 29," etc. If I could get NVDA to do that, I could say to viewers of this document, "If you are using NVDA, remember to Ctrl+Shift+N to get the GoTo Box, then type in the page number you want if you cannot follow a link or a bookmark." This document is *very* accessible in my opinion with lots of ways to navigate...the only aspect of navigation that isn't being picked up are those footer page numbers!
I do have my Document Formatting settings on the NVDA menu set to "Report Headers," but that does not seem to help in either Microsoft Word 2007 or Adobe Acrobat. I have even switched the page numbers from the footer to the header to see if that would help and it didn't.
----Activities I have done today----
I spent over an hour on the phone today with Freedom Scientific (makers of JAWS) trying to troubleshoot this. We discovered that Footers will not read very well in JAWS and Microsoft Word 2007 (only solution is to stop reading document text and read Virtual Viewer text briefly, then go back out to document text, then back into Virtual Viewer which is NOT an acceptable or accessible solution whatsoever -- too much work for someone trying to read the document) -- and then we also discovered that:
Upon conversion from Word 2007 to .txt file (.docx to .txt), there are no alt tags for the figures in the document, or page numbers.
Upon conversion from Word 2007 to Adobe Acrobat X then to .txt file, every insert of a page number and footer is replaced with the same alt numberpad numerical code: the one that generates female. ♀No wonder JAWS and NVDA are skipping this, neither understand how to communicate it.
On the advice of JAWS Technical Support I contacted Microsoft Accessibility Technical Support and spent an hour on the phone with them. They say that unless Adobe can find a solution, it appears that it is impossible for Microsoft products to read the footer if JAWS was unsuccessful doing what I wanted it to do. The document/footer in question includes about 12 pages of front matter (numbered in Roman numerals) and 44 pages of body text (numbered in Arabic numerals).
I kindly explained to the Microsoft Support Agent that I found this issue hard to believe, although I understood. Sighted folks have the ability to make their documents look quite professional and that is the caliber and quality of documents anticipated from everyone, especially college students graduating from school, or job applicants. That a coding issue prevents the footer from being read properly, except in Edit view, is disappointing. The representative was with me 100% of the way. She completely understood where I came from. And yes, when I am designing the document myself, I know what I put there (or I pretty much do, anyway). But if I recieve a document, it is much harder to tell what is really there or not, or how the page numbers really lay. And this is confusing as heck, believe me.
I then called Adobe Technical Support, after having a brief online chat with them. Granted, I had to leave the chat in the middle because I got interuptted by something that was high-priority, but the woman chatting from Adobe says that chat is only for installation issues, and I will have to pay to open a support ticket. Excuse me? I have paid a hefty sum of money for Adobe Acrobat 9 and Adobe Acrobat X (work paid for the other Acrobat X copy). I deserve this problem to be troubleshooted for free. There was even a statement on the Adobe Acrobat X website that said Acrobat X users didn't have to pay for support, but Reader users did.
----Slight bit of rant and constructive criticism----
In speaking with Adobe Technical Support, I had to wait on hold for 30 minutes before my call was answered, and then I had to consent to being on hold countless times and had to answer, "Yes, I am converting from Word 2007 to PDF using Adobe Acrobat X" at least 6 times. The representative would put me on hold, then ask me the question, then put me on hold again, repeated 6 times over 45 minutes. At the end of 45 minutes (1 hour and 20 minutes of wasted time by now, that I must justify to my employer) - I told the representative I wanted to speak with his supervisor immediately, I did not care if he was trying to fill out a support ticket (and putting me on hold at least 4 more times in 10 minutes while he claimed he was filling out the support ticket) - and finally he put me on hold again and gave me to a very helpful supervisor. Within 6 minutes of speaking with the supervisor the supervisor had my support ticket filled out and I should recieve a call from Adobe within the next 30 minutes if his estimation was right (he estimated two hours, but it's been an hour and a half).
I have yet to know what can be done about my document. Freedom Scientific Technical Support is closed now for the day and I need to work tomorrow and Friday away from the phone. As I stated to Microsoft Accessibility Support, I truly feel that Adobe should read the page footers, every document says that Adobe should be able to read the page footers, and I feel slighted that as a person who uses assistive technology, there is some glitch that isn't making this happen. I am not blaming a specific place per se, except I am a little frustrated with Adobe especially since they have not gotten back to me, and I am frustrated with their customer service. JAWS customer service and Microsoft customer service were both exemparly, and I cannot say enough good things about them. My wasted time with Adobe however, that was disrespect in my opinion. And I certainly will not pay to open a support ticket, and my workplace has a site license. They've paid enough already.
If you've read this far, thank you. I look forward to replies, or at least understanding. And if anyone has ideas, I'd appreciate it very much (yes, I have tried taking the page numbers off and using Adobe's page number feature, but that would not allow Roman numerals. Only Arabic.).

Greetings NoNameGiven,
If I understand the problem correctly (I’m not sure I do) you would prefer ‘iii’ to be read as “eye eye eye” rather than “three”? The alt text property is the only way that I know of to make this happen. Hope this helps.
a ‘C’ student

How to register adobe CC?

I have been trying in vein for about a half hour to register my adobe CC Premiere After effects and Photoshop programs... I acquired the thirty day trial and every time I try to register or purchase the full version I get some runarounds about a cereal number that I need to complete my purchase. I was not given any such numbers in the email I received on initial download. I have followed all the prompts and am still at square 1. All I want is to be able to continue to use my Adobe products but my trial runs out in a few minutes according to the programs themselves... I need these programs in order to continue my new business and am willing to pay the $30 a month to have them, but the sight won't let me without the stupid codes! Codes that I don't believe I ever received... please help asap.

I just tried using the link you sent me as a guide and the same thing happened again, I'm not sure how to uninstall Adobe cloud, and even if I knew how I'm currently using Premiere Pro. I can convert the file and close premiere but then I won't be able to reopen it if this problem persists, I was never given a serial number... so why does this keep appearing when I try to register my products and more importantly how do I fix it. If the only solution is uninstalling CC then how do I even do that? I do appreciate the help so far even if I don't know how to do one half and the other got me nowhere...

How to register Adobe Photoshop touch?

I have downloaded from Google Play store Adobe Photoshop touch. How can I register that in my Adobe account similar as all my other Adobe products? There seems not to be any serial number available.
Thanks for help
Hanspeter

You basically don't register the app itself (Adobe already knows you bought the app via Google Play); there's an option in the app itself to connect to your Creative Cloud account (if you have one available).

Adobe 7.1.0 communicating with Microsoft outlook 2007

I am running Adobe Professional 7.1.0 and OS Windows 7. when I send a adobe file for review/approval, outlook does not acknowledge in it's "send/receive" function that the file was sent. When I first change to Windows 7, this was not a problem. What can I do to correct this function?

In the Adobe Professional 7 I send out documents for approval and they have to route to several persons, for instance, when the document comes back to be I have a feature that allows me to “Invite additional Reviewers” which keep the link unbroken and retains all the signatures or comments as the document routes. And there are other features that allows me to be the “chauffer” if you will for controlling the routing from one area to the other. The tool bar layout is easier to follow to me than in AAxi. In 7 it will allow you to place the tool bars in the like manner as Microsoft office, but in AAIX, most of the tool bar position over to the right which takes up part of your window space. I could not find how to position them in a different place. IE, at the top or bottom of the screen. Just the little feature that makes it more user friendly.
Thanks for your help.
Mary L. Bartell
Accounts Payable
Housing Authority of High Point
500 East Russell Ave
High Point, NC 27261
Phone: 336-878-2332
Fax: 336-887-4021
<mailto:[email protected]> [email protected]
NOTICE: This email message, including any attachments, may contain information that is confidential and/or proprietary. If you are not an intended recipient, please be advised that any review, use, reproduction or distribution of this message is prohibited. If you have received this message in error, please completely destroy all electronic and hard copies, and contact the sender at 336-878-2332 or <mailto:[email protected]> [email protected]

How do I open a pdf stored in a Microsoft Access database using Visual Basic studios 2012

Currently I am unable to find a valid method of being able to open a pdf stored in a Microsoft Access database using Visual Basic studios 2012. I've tried displaying the entire database on a form, but when I do this all the other columns show up with
the correct data besides the one containing the pdf's, it just displays <binary data> in each row down the column. I also tried another method with which you use the database as a dataset and can drag and drop the rows and columns into the form, which
again works for all the other columns besides the one containing the pdf's but this time I'm unable to interact with the column at all.
Not too sure if this is in the correct place, but any answers or help would be appreciated. Cheers.

Alex,
This forum is dedicated to Project and Project Server. You might get better response, if you post to a Visual Basic forum. Here are couple I could find.
https://social.msdn.microsoft.com/Forums/vstudio/en-US/home?forum=vbgeneral%2Cvblanguage&filter=alltypes&sort=lastpostdesc
Cheers,
Prasanna Adavi, Project MVP
Blog:
Podcast:
Twitter:
LinkedIn:

How do i back up new phone contacts to microsoft outlook 2007 ?

iam using Windows 7 Home Premium OS, and have all my iphone contacts saved on microsoft outlook 2007.
Every time i add a few new contacts to my iphone 2G 3.1.3 OS, and sync it to Outlook 2007; all the contacts from outlook overwrite allcontacts on iphone. I end up losing all my new contacts created on iphone. I am using iTunes version 10.1.0.56.
Please help me with the right steps to save my contacts and messages and voice memos too.
Thanks

The safest thing to do with your pictures is to import them to your computer, as described here: http://support.apple.com/kb/HT4083. You can also back up your contacts separately by using an app like My Contacts Backup.
Then back up your phone, either to iCloud or to your computer using iTunes, as discussed here: http://support.apple.com/kb/HT1766.

How to register .xsql as a XSQLservlet class?

Hi,
I run Sambar (www.sambar.com) as a webserver and servlet engine with an Oracle 8i (v8.1.5) database on Windows98. Also, jdk1.3 is installed.
I have downloaded the Oracle XML software (XSU12 and xsqlservlet_v0_9_8_6) and installed both. OracleXML runs fine from the command line.
I now need to register the file extension .xsql to map to the Java servlet class named
oracle.xml.xsql.XSQLServlet.
Can anyone tell me how this is done (or maybe provide me with some theory so i can figure it out myself? I do not understand the handler=oracle.xml.xsql.XSQLServlet statement)
Thanks, Bart

Isn't it up to Microsoft to tell you how to make a program a trusted publisher for Access?

Had Adobe Pro X and now have XI, cannot see in Access 2007 to make PDF

Upgrade to Adobe Pro XI from X. Used X in Access 2007 to make PDF Multiple PDF reports. No longer see the ADOBE ICON IN THE TOP OF THE ACCESS 2007 toolbar. How to get it back?

Hi richard1888,
Please check out this document, and let us know if it does the trick: https://helpx.adobe.com/acrobat/kb/pdfmaker-unavailable-office-2007-office.html
Regards,
Sara

How do I sign my VB / VS 2010 based shared COM add-in for Excel so it loads when the user has checked "Require application add-ins to be signed by a trusted publisher"?

My COM add-in is developed using VS 2010 and VB. It's a shared COM add-in (not VSTO) and it works with Excel 2007 - 2013. My installer is signed with a code signing certificate but it would appear that my add-in's .dll should also be signed if the user has
checked the "Require application add-ins to be signed by a trusted publisher" option.
The "Sign the assembly" option is checked in my add-in's VB -> My Project -> Signing. I have a .snk file selected which I seem to recall generating 6 or 7 years ago when I ported the COM add-in from VB6 to .NET.
I have an up-to-date Comodo code signing certificate (a pfx file called MyCompanyCodeSigningCertificatePrivateKey.pfx) which I purchased to use with the installer and was wondering if and how I could use this.
I tried selecting my pfx file in the My Project -> Signing -> "Choose a strong name key file" dialog. It made a copy of the pfx file in my project folder but when I tried to build the project, I got the following error:
Error 1 Cannot import the following key file: MyCompanyCodeSigningCertificatePrivateKey.pfx. The key file may be password protected. To correct this, try to import the certificate again or manually install the certificate to the Strong Name CSP with the
following key container name: VS_KEY_C0B6F251F0FB6016
After a little research, I found out I might be able to use signtool to sign the dll in a post-build step.
I added the following command to the post-build event, before the command I use to regasm the assembly.
"path to signtool\signtool" sign /f "MyCompanyCodeSigningCertificatePrivateKey.pfx" /p "xxxx" /v "$(TargetPath)"
When I built the project, the dll appeared to get signed (the output window showed a bunch of confirming text as well as "Successfully signed: c:\MyAddIn\bin\Release\MyAddIn.dll") but the next step in the post-build (regasm myaddin.dll /codebase)
issued a warning RA0000 (see below) but reported "Types registered successfully".
Here's the message I get from regasm, even though the output window says the dll was sucessfully signed:
RegAsm : warning RA0000: Registering an unsigned assembly with /codebase can cause your assembly to interfere with other applications that may be installed on the same computer. The /codebase switch is intended to be used only with signed assemblies. Please give your assembly a strong name and re-register it.
Types registered successfully
I'm not using a shim if that makes a difference.
How do I sign my add-in so it loads when the user has checked "Require application add-ins to be signed by a trusted publisher"?
Any tips would be appreciated.

Hello,
Why do you need to use the regasm utility from the post-build action?
There is a difference between signing the assembly with a strong name and digital signature. The
How to: Sign an Assembly with a Strong Name article in MSDN explains how to sign an assembly with a strong name (.snk). See
How to digitally sign a strong named assembly for adding a digital signature.
You may also find the
What's the Difference, Part Five: certificate signing vs strong naming article helpful.

How can I change the default pdf reader from the installed (but not yet registered) Adobe Acrobat 9 Pro to Adobe Reader XI?

How can I change the default pdf reader from the installed (but not yet registered) Adobe Acrobat 9 Pro to Adobe Reader XI? I'm having some hiccups getting Adobe to register the software, but since I set it as the default .pdf reader during setup, things try (and fail) to open in the as yet unregistered software. How can I change it temporariiy to the Acrobat Reader XI that I have installed?

Anubha,
It worked! Thank you so much.
I'd opened file with the 'Open with' feature then clicking Adobe Reader,
but that didn't do it. When I used 'Open with', then 'Choose default
program...', it worked like a charm.
Again, thank you!
Jonathan
On Wed, Mar 18, 2015 at 10:16 PM, Anubha Goel <[email protected]>

How do I preserve a hotlink from Publisher to Adobe?

Before I installed Adobe XPro, all my hotlinks from the publisher documents converted and were active. I had hotlinks that were linked to shortcut text such as "click here" as well as hotlinks that were attached to the full text of the internet web address.
Now that I have XPro, only the hotlinks attached to the full text of the web address are active in the pdf document. All the link attached to the "click here" are dead.
Is there a setting that needs to be changed? Please help. Thanks!!!

How did you create your PDF from Publisher? Are you using PDFMaker Add-on? If so, do you have the checkbox selected to "Add links" in the Acrobat PDFMaker Add-on preferences?

How to register and publish the webservice in the registry

hai friends,
1) how to register and publish the webservice in the
registry?
I think To register the webservice first create an
organization and publishes it to the registry then
only register the webservice .Is it correct or not .
If it is not correct give the suggestion for me.
otherwise send the reply it is correct for me.
and tell about ClassificationScheme and why we are using that ?how can i get the String ?
Thanks,
radhika.

My Support Profile*

I want to know how to register a preowned CS5.5 with ADOBE and activate it?

I want to know how to register a preowned CS5.5 with ADOBE and activate it?

Transfer an Adobe product license
Mylenium

How To Register Adobe As A Trusted Publisher to Microsoft Access 2007

Similar Messages

Maybe you are looking for