How to register as a developer in SAP
hi
how to register as a developer in SAP,
i got to make soe chages to the extract structure for that i need the access key.
any one can please give me the required information.
regards
sampath.
Hi,
you need to goto the service marketplace http://www.service.sap.com
There you can register as a developer in your system (you need the installation no. of your system for that -->system->status) and you get access key for sap objects if necessary.
kind regards
Siggi
Similar Messages
-
How to Register as a Developer on SAP NetWeaver ABAP 7.02 Trial Version
Hi Everyone,
I was following a tutorial on ABAP and this centred on "Hello World" application. I got a message that I haven't been registered as a Developer on the system and that I need some code from OSS. I have tried checking here for any clues but it seemed none existed. Can't SAP be a bit more simplified like MS? It really requires lots of effort to get the right help and even at that, helps are not easily come by. I really which someone would point me in the right direction this time.
Thank you.plz can u answer me to solve my problem... i download SAP Netweaver 7.02 and install it ...... when log on to SAP i can not make any think ..... SAP tell me You are not registered as a developer ... please register in the online service system (OSS). in the OSS you will receive an access key.
i log on by
DDIC and BCUSER
and i have the same problem
PLZ tell me how can registered my self as a developer on sap to get access key ..? -
How to register External Adaptor Engine in SAP PI 7.0 to select ADE in IB?
Hi,
I am Sreeramulu Konjeti, I installed PI 7.0 as standard alone system.But Adapter engine is not working, thats why i installed Adapter Engine separately...even I registered Adapter Engine in SLD...But i am un able to see that Adaptor Engine in Integration Directory.....please tell me what are the required steps to do if i want to see external adapter engine in Integration Builder.
Thanks & Regards
Sreeramulu Konjeti.Did you followed this....
Importing Software Component Versions
[http://help.sap.com/saphelp_nw04/Helpdata/EN/32/306c15d227ca458216529d7a0472ff/frameset.htm]
If you did this I think you just need to add new object from Integration builder -
How to register External Adaptor Engine in SAP PI 7.0?
Hi,
I am Sreeramulu Konjeti, I installed PI 7.0 as standard alone system.But Adapter engine is not working, thats why i installed Adapter Engine separately...even I registered Adapter Engine in SLD...But i am un able to see that Adaptor Engine in Integration Directory.....please tell me what are the required steps to do if i want to see external adapter engine in Integration Builder.
Thanks & Regards
Sreeramulu KonjetiHi,
Check out the blog mentioned by prateek if my solution does not do the trick atleast his will surely do. https://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/9874. [original link is broken] [original link is broken] [original link is broken]
Rgds
joel -
How to register user with developer rights in Netweaver 2004s
Dear all,
I have installed net 2004s on my laptop i want to use bw system in default client 001.
for that that i created a new user in 001 client
but that user is not registerd as developer .
can you suggest a way .
Regards,
gaurav.Hi,
You have IDES version running,here some default user id and corresponding access key will be stored in table DEVACCESS.In real case there will be no entry initially.You have to get it from service marketplace as mentioned by Juan.When a developer will give the key that entry will be updated in the table DEVACCESS.
so I said try to see if any access key entry is there in table DEVACCESS.If so create a user id (from the table entry) and assign the key.
Regards
Ashok -
How do I register as a developer in the Online Source System?
Im trying to add an ABAP program to SAP BW, and I get this message:
You are not registered as a developer.
Please register in the Online Source System (OSS).
In the OSS you will receive an access key.
I have no idea what this means. How do access the OSS and do this? I have done various searches on SAP's site and I've not found anything useful.
Is there any shortcut I can use to get this access key and proceed with work? I'm on a tight deadline?> Well , you should speak to your Team Lead and request for ABAP Developer Access Key.
> Your Tem Lead will request BASIS guys to generate an Access Key for you.
> Once you receive your access key, try to create a program in SE38 > It will prompt you to enter Access Key. > enter the generated access key and continue.
Cheers
Praveen -
How to delete developer's SAP UserID and his SSCR key on SMP?
How to delete developer's SAP UserID and his SSCR key on SMP?
Dear Experts,
Background:
I want to delete developer's SAP UserID and SSCR key in QAS and SMP.
Because as I known, developer's SAP UserID(registered SSCR key) is belonging to the SAP License measurement.
I want to rid of the useless developer's SAP userID and the SSCR key registered on SMP.
====================Here below is the message I created===================
Dear Expert,
One of our developers whom registered SSCR key left, I want to delete
his SAP UserID and his SSCR key.Can you pls tell me how to implement?
What might have happened(expecially the downside) in the corresponding
SAP Client if I delete the developer's SAP UserID and SSCR key? Will
it cause our system screw up?
I've searched the answer on SDN. Someone told me I should carry out the
follow steps below:
(1)Delete the Developer's SSCR key on Service Market Place(SMP).
(2)Cancel all the Jobs defined by the Developer in DEV.
(3)SU01, Replace the value 'Developer' with Blank at the 'LicenceData'
lable.
(4)Delte corresponding item of the Developer in 'DEVACCESS' table.
(5)Lock/Delete the Developer.
Is that right?
Thanks!
Jason
====================Here below is the reply from SAP===================
Dear Customer,
When the SSCR Developer/Object keys are transfered to the system, the
keys are stored in the following tables:
o DEVACCESS : Developer keys
o ADIRACCESS: Object keys
But we do not have any report programs to delete the entries from these
tables. If the customer wants to delete the entries, he has to write a
local program to delete the table entries.
SAP does not recommend ever cleaning out these developer keys, as long
as the user ID is Locked / Deleted, that is the main thing.
please Cancel all the Jobs defined by the Developer in DEV.
So my recommendation to you is to first lock the user id of the user.
Then Assign him a new userid which is not identical to the first one andthen subsequently delete the old userid.
If you have an absolute need to delete a developer key without deleting
a user then the easiest way to do this is probably to
write a report with the instruction :
delete from DEVACCESS where UNAME = ....
Please note :
There is no recording, who did what in the table, that is why SAP strong-ly does not recommend this, and customers will have to take responsibil-ity for this action.
Thanks
====================My question is:===================
Do you have any better suggestions?Hi,Rahul,Raghunandan
Thank you very much!
Her below were the SAP Support's main suggestions:
1. Lock the user id of the user, then Assign him a new userid which is not identical to the first one and then subsequently delete the old userid.
2. If you have an absolute need to delete a developer key without deleting a user then the easiest way to do this is probably to write a report.
I want to know if I can delete the SSCR key directly via a particular TX? If I can, what is it? (I just want to know. For safety, I think I won't delete the SSCR key directly remained in 'DEVACCESS'.)
Thanks!
Jason -
How to register custom report under Custom Development Application
Hi 2 all
How to register custom report under the Custom Development application in R12 vision DB, and also confirm location/folder of Custom Development application in R12.
Thanks
ZulqarnainHi,
You may or may not need to "register" the workflow - it depends on the changes that you made and which Item Type you modified. Some applications are essentially hard-coded to use a specific item type and process, some hard-coded to use an item type but you can configure the process to use, and some allow you to specify which item type and which process to use.
Without knowing exactly what you have done, though, there is no specific advice that anyone can give you here on what you need to do, apart from to ensure that you have saved the new definition to the database.
HTH,
Matt
WorkflowFAQ.com - the ONLY independent resource for Oracle Workflow development
Alpha review chapters from my book "Developing With Oracle Workflow" are available via my website http://www.workflowfaq.com
Have you read the blog at http://www.workflowfaq.com/blog ?
WorkflowFAQ support forum: http://forum.workflowfaq.com -
How to register SAP CCM4x Agent on Solaries platform?
Hi,
Could any one tell me that how to register SAP CCM4x Agent on Solaries Platform?
Thanking you
Regards
PranavCheck the documentation
http://service.sap.com/monitoring
There you will find guides how to set up your scenario.
Markus -
How to register "Enter" event in sap xrpm
all expert:
how to register "Enter" event in sap xrpmall expert:
how to register "Enter" event in sap xrpm -
How to register InfoView licenses as the incremental purchase?
Hi all,
I am in charge of the report development for an internal project by Business Object XIR2 for the company and get confused about how to register the product keys for more InfoView users.
There are a number of InfoView users for the next release for our reporting system, so we bought a dozen of licenses from BO company. When I recieved the Delivery Note I was quite strange by how to proceed in the CMC.
Item: 51-00636-085 SAP Temp Key Letter V3
Is this a slip containing the prerequisite information for next operation or this should be received as a email with the necessary temporary keys?
I have found this item in the product package and I am not aware of how to do then.
Thanks in advance for the assistance.
Regards,
JoshuaHello Joshua,
I recommend to post this query to the [BusinessObjects Enterprise Administration|BI Platform; forum.
This forum is dedicated to topics related to administration and configuration of BusinessObjects Enterprise, BusinessObjects Edge, and Crystal Reports Server.
It is monitored by qualified technicians and you will get a faster response there.
Also, all BOE Administration queries remain in one place and thus can be easily searched in one place.
Best regards,
Falk -
How to register the recipient when create job by function
I am now use JOB_OPEN , JOB_SUBMIT and JOB_CLOSE to create a job in the program. And need to post the result of the report to the person by email.
Can you tell me how to register the recipient when create the job.
( in sm36, it is easily to do but how to do in coding? )
regards,
slamHi
I think in Back ground using the above fun modules you can't send a mail to the receipient.
see the use of the above fun modules;
IF p_bjob = 'X'.
CONCATENATE sy-cprog sy-datum sy-uzeit
INTO jobname SEPARATED BY '_'.
CALL FUNCTION 'JOB_OPEN'
EXPORTING
jobname = jobname
IMPORTING
jobcount = jobcount
EXCEPTIONS
cant_create_job = 1
invalid_job_data = 2
jobname_missing = 3
OTHERS = 4.
CALL FUNCTION 'GET_PRINT_PARAMETERS'
IMPORTING
out_archive_parameters = arc_params
out_parameters = print_params
valid = valid
EXCEPTIONS
archive_info_not_found = 1
invalid_print_params = 2
invalid_archive_params = 3
OTHERS = 4.
IF valid = chk.
SUBMIT ybrep
WITH < sel Screen>
AND RETURN
USER sy-uname
VIA JOB jobname
NUMBER jobcount
TO SAP-SPOOL
SPOOL PARAMETERS print_params
ARCHIVE PARAMETERS arc_params
WITHOUT SPOOL DYNPRO.
CALL FUNCTION 'JOB_CLOSE'
EXPORTING
jobcount = jobcount
jobname = jobname
strtimmed = 'X'
EXCEPTIONS
cant_start_immediate = 1
invalid_startdate = 2
jobname_missing = 3
job_close_failed = 4
job_nosteps = 5
job_notex = 6
lock_failed = 7
invalid_target = 8
OTHERS = 9.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSE.
MESSAGE i029 WITH jobname.
ENDIF.
ELSE.
MESSAGE s000 WITH text-003.
STOP.
ENDIF.
ENDIF.
Reward points if useful
Regards
Anji -
Registering a program on the SAP gateway
Hi All
I have to setup an interface to an external application from SAP using ALE and IDocs. The external application needs to register an instance on the SAP gateway server. If this is complete then you only need to setup an RFC connection with a programID (The ID that is used in the gateway instance) and it will allow a connection between SAP and the external application.
The problem I am having is that I dont know how to register the external application on the SAP gateway. Can anyone help me with this problem?
Thank you.Hi,
the below blogs may help you
Program ID in RFC destination-XI
/people/michal.krawczyk2/blog/2005/03/29/configuring-the-sender-rfc-adapter--step-by-step
- Satish -
How to add a page in the SAP Scripts
Hi All,
I want to know how to add a page in the sap scripts. there is already sap script developed by some other person.
Now I have to add a page in front of that and have to add some more data.I added a page in page windows but thats not at all working.
Please help me out in this.
Thanks,
Praveennew page will create in sap scripts using new page command.
you have to set condition like after some number of records displayed in page new page has to be trigger.
ex:YOU HAVE SO MANY RECORDS FOR PRINTING BUT YOU WANT TO DISPLAY 100 RECORDS IN FIRST PAGE REMAINING IN SECOND PAGE LIKE THAT.
Here you can use NEW PAGE COMMAND .
IT IS OPPOSITE PURPOSE OF PROTECT AND ENDPOTECT.
Reward if useful. -
Can anybody tell me how many text elements are there in sap scripts?
hi all,
can anybody tell me how many text elements are there in sap scripts?Hi,
Do you mean that you want to know how many Text-elements are there in a specific Script or you want to know how many max Text-Elements a script can have?
I believe there is no limit on this......
To know all the Text Elements in a Script......goto SE71....press F4 Help on Script Name....Choose Last option for Custom developed Scripts.....and you can open the complete Script details & Code in a Line Editor...After that you can serach/look for the text elements
Maybe you are looking for
-
I'm using my iPhone for listenting to lectures on iTunes U. When I download lectures to my laptop, they are sometimes arranged non-sequentially. I can fix this by renaming the files (e.g., with numbers in the titles), and then sorting by title. H
-
Transport management system in ABAP
Hello Abappers, Could you please provide me with the guided procedure of how the transport management system in ABAP works? Please explain it in detail. Points will be rewarded for relevant answers. Regards, Mansi.
-
Your request could not be completed. Invalid account for this Email Address
I have the App Store Account It was developed as an account in alternative iClaude. It was sending a message to confirm the account But when I put my account And password Show me the written page "Your request could not be completed. Invalid account
-
Hi, I recently imported an 8.1.5 database into a new install of 8.1.7. When I connect through a sql plus session I get this message: ERROR: ORA-06553: PLS-707: unsupported construct or internal error [2603] Error accessing package DBMS_APPLICATION_IN
-
Need Bi Publisher Bursting XML Schema
Hi All, I want to understand the XML Publisher Bursting. Can any one point me to the schema on which this bursting control file is based. Thanks, Prabhakar Somanathan