How to register HFM aplication with Shared services

Hi,
Version 11.1.2
I am new to this version and asking help how to register HFM application with shared services.
In ver 9.3.1 we register in config utility.
Regards
Kumar

You should start the EPM system configurator, it is the same concept as earlier versions, just the look and feel is slightly different.
Cheers
John
http://john-goodwin.blogspot.com/

Similar Messages

  • How to register Essbase server with Shared Services?

    Hello All,
    How to register Essbase server with Shared Services?

    Hello All,
    How to register Essbase server with Shared Services?

  • Registering an application with Shared Services

    I just used HfmCopyApplication.exe to migrate an application from out production environment to a newly installed test environment. However, when I open in the HFM System 9 thick client in the test environment and try to "Open Application", I can see the new application listed (so I know the migration was successful), but I get a message saying "+This application is not registered with Hyperion Shared Services. Please contact your administrator.+"
    Can anyone provide some insight? I don't know how to register an application that was migrated from another environment, and I'm hesitant to create a new application with the same name because I don't want to accidentally wipe the one out that was just migrated over. I've looked through the documentation for the HfmCopyApplication, but it only says that I need to register the migrated app with Shared Services... It doesn't tell me how.
    Thanks.

    that usually means that Workspace has not been configured to know that HFM is in the environment as well, or that for some reason you don't have access to that option.
    On the machine where Workspace web component has been installed you will need to run the System 9 configuration utility and choose the task "Reporting and Analysis" and "Configure Web Server". When you get to the screen which asks you to specify the hostname and port of the individual web servers (Financial Reporting, Web Analysis etc) make sure that HFM is ticked on (checked) and that the hostname and port for the HFM web server are correct (should be port 80). Complete the steps with Next Next Next and Finish, then restart both the Apache http server and the Workspace web server (Tomcat/Weblogic/Websphere etc). After that, the next time you log in to Workspace and go to Navigate->Administer you should see the options relating to HFM.
    If it is still not there, go to Help->About->Version Details and check that a version for Financial Management component is displayed. If a version number is displayed then it something to do with your access rights (maybe a Creator / Administrator group has been set in the HFM Server / Web Config utility, try to remove it and try again?). If no version number is displayed then Workspace still doesn't know about HFM component (the above step hasn't worked).
    If you are not sure speak to the person who did the installation, or if you have a support contract with Oracle then contact Oracle support.

  • Planning Appl not able to register and unregister with shared services

    Hi All,
    I created a planning application before that I created a datasource. After crearting an application I got an error as Application  not able to register with shared services .
    And also I am facing one more issue that is if I delete any particular planning application at that time I got an error as Application  not able to unregister with shared services.
    I am able to open the planning application through http://<planningmachine>:8300/HyperionPlanning/AppWizard.jsp and its working fine. I am able to open the Shared Services though Workspace but I am not able to find the option for planning application.
    Kindly guide me how to overcome it.
    Thanks and Regards
    ChiDam

    Have you checked the logs? Found something?
    This normally happens when there is issue with Planning app and cluster mapping. For some reason, the application maps to non-existent cluster in Planning system schema resulting in failure of HSS registration. you can manually re associate the cluster using configuration tool and try registering again.
    Cheers..!!

  • Registering Planning app with shared services

    Hello all.
    I created a new classic planning app (11.1.1) with the intention of mirroring our production app. I've copied that outline from the production app to the new app. I've also exported the sql server database used by the production planning app and restored it to the new app. Everything seems fine so far.
    My question is about the registration of the new app in shared services. The production app has about 35 MSAD authenticated users. What would be the process for registering the new app with shared services and setting up users from the production app. I didn't specifically register the new app when it was created.
    I'm a little apprehensive. I don't want to do anything that might affect the current production app. How can I register the new app and add users without affecting the current production app. Is it as simple as going to Administration -> Applications Settings and clicking on "Register Shared Services" and setting up new users? Or are there other steps that need to occur?
    Any help is very much appreciated.
    dave

    You shouldn't need to register as you would of created a blank planning application at first that will be registered with Shared Serices, then the provisoning of users/groups in shared services for the planning application would be done, then you would migrate the relational database across.
    You wil probably need to edit the shared services URL from within planning but no need to reregister.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Can't register Hyperion Workspace with Shared Services

    When I used Hyperion EPM System Configurator 11.1.1.1 to register workspace with Shared Services, it failed. Can someone provide possible reasons? I'm using Apache HTTP Server.

    Hi
    Try with the following steps:
    1. Ensure Shared Service is already installed.
    2. Ensure OpenLDAP and SharedService is running.
    3. If SharedService is properly running you would be able to access it. (i.e. http://<your_machine_ip>:28080/interop
    4. Check if workspace group already created or not. (BI+)
    5. If created , delete it.
    6. Try with the register option for workspace again.(Only select Workspace no child object need to be selected to to register workspace).
    Thanks
    Rupak
    (Manra to WIN - WinMantras.com)

  • Register with Shared Services 11.1.1.4 / AIX / WAS

    Hello Admins,
    I'm working on an installation of EPM Interactive reporting. The environment is AIX 6.1 with manual deployment in Websphere Application Server 6.1.
    Shared services manual deployment was successful and comes up OK.
    Moving onto the Workspace configuration tasks, the Register with Shared Services task fails. In past versions, the configuration utility would ask you the location of where Hyperion Shared Services is installed. In version 11.1.1.4 there are no options at all!
    The error is very basic, communication error--
    (Jun 21, 2012, 05:02:03 PM), com.hyperion.cis.config.CmsRegistrationUtil, ERROR, register operation failed in CMS:
    com.hyperion.interop.lib.OperationFailedException: Unable to connect to Shared Services, make sure the Shared Services server is running and try again.
    at com.hyperion.interop.lib.helper.RegistrationHelper .register(Unknown Source)
    at com.hyperion.interop.lib.CMSClient.register(Unknow n Source)
    at com.hyperion.cis.config.CmsRegistrationUtil.regist erProduct(CmsRegistrationUtil.java:142)
    at com.hyperion.cis.config.wizard.RunAllTasksWizardAc tion.executeHubRegistrationTask(RunAllTasksWizardActio n.java:477)
    at com.hyperion.cis.config.wizard.RunAllTasksWizardAc tion.execute(RunAllTasksWizardAction.java:258)
    at com.installshield.wizard.RunnableWizardBeanContext .run(Unknown Source)
    Has anyone run into this before? Is there a way to manually register other products with Shared Services?
    Thanks for any help!

    Exactly!
    I was hoping there was a manual method to force the registration with shared services. Since the configuration tool doesn't ASK you where SS is installed it must be pulling this information from somewhere, perhaps that could be manipulated?
    Edited by: edubs11 on Jun 22, 2012 10:07 AM

  • Register with Shared Services Failing in 11.1.1.3

    Hi,
    We installed 11.1.1.3 in Linux operating system and the application server is Websphere 6.1.After Installation and Configuration of EPM products we Externalized users from EAS Console and configured Active Directory in Shared Services and now want to migrate users of Existing Production environment to new Environment.For that created a new testgroup in Shared Services under Native Directory and when I am refreshing it's displaying an error as shown below:
    Essbase failed to get roles list for [ESB:Analytic Server] from Shared Services Server with Error [32:1062:Failed to connect to the user directory [msadServer]
    Can anyone suggest on this.
    Any help is appreciated...

    This usually happens when the application exists in Essbase but does not exist in Shared Services.
    To resolve this you need to go into the AAS console, right click on the Sample application and select the 'REGISTER' option.
    This will register the application with Shared Services. You should then see the application listed in Shared Services under the Analytic Server project.
    You will need to make sure that the list of applications in the Analytic Server matches the list of applications under the project in Shared Services. If you have any other applications missing then please register those as well.
    HTH-
    Jasmine.

  • New Essbase install - fail at "Register with Shared services

    Hi all,
    I'm configuring up a new LINUX ( Redhat ) server to run Essbase 11.1 and the installation fails at the point where, in the configtool (using this in GUI mode not command line ) it's registering the components with Shared Services. In the configtool logs file I see:
    (Jul 20, 2010, 02:47:19 PM), com.hyperion.cis.config.CmsRegistrationUtil, ERROR, Failed to authenticate user = admin
    (Jul 20, 2010, 02:47:19 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Error:
    Error Code: -1
    com.hyperion.css.common.configuration.CSSConfigurationException: 20:3008:Failed to connect to native directory. Error Code: 9
    On a previous install, I had exactly the same problem, and this was resolved by increased the number of processes on the Oracle XE instance that the shared services was using. However we already tried that and its not the problem. All processes seem to start up OK and if I browse to http://server:28080/interop it gives me the EPM web page, but if I select "Launch Appliction" it opens another window with a error "An error was encountered while performing this operation".
    I've tried reinstalling, dropping the HSS schema, stop starting all services and mixtures of all but to no avail.
    Can anyone advise.
    Thanks

    Just for info, the we don't have any form of "admin" user that is used anywhere so we're not sure where this is coming from.

  • Issue with shared services - Need Urgent Help please!!

    Hello Experts
    One of my customer has installed a new instance of oracle and copied all the schemas and data over to the new instance.
    Now when they bring up shared services, have lost all our provisioning. None of the projects are recognized by shared serices and gets the following error when we try to bring up a user
    'xxxxx' is not a recognized Shared Services project. Please contact your adminstrator
    Is there something we need to do to restore Shared Services to its original state?
    Thanks in advance.
    Regards,
    Sonu
    Edited by: 637223 on Jan 20, 2009 2:19 AM

    hi,
    I doubt that "creating a new instance of oracle and copied all the schemas and data over to the new instance" will register the project with shared service and thats why giving error. Because when you install shared service, it asks you about the database name (oracle in your case) to register with. So even if you overwrite that database by new instance it gives error.
    Have you tried the configuration utilty ? Over there you can provide the new database instanse as your database and configure your shared service. Remember that you need to do a complete configuration of shared service , analytic administration services and analytic services. After configuring, Restart the system.....it should work.
    Hope this helps!
    Regards,
    James

  • Registration of Analytic Services with Shared Services

    Hello All,
    We are installing the Hyperion system 9.2 suite with Planning & Essbase.
    Following advised processes, we installed analytic services & tried to register the product with shared services, using the configuration utility. Even though the operation is declared as "succeded", we are unable to provision any user to Analytic services in Shared services, which is a proof that the registration failed.
    Is there any particular action to be done to get this operation succeeded?
    Thanks for your help.
    Mike.

    Re: Unable to Externalize users to Shared Services

  • Urgent: Error in registering HFM with Shared Services while configuration.

    Hi,
    I am installing HFM 11.1.2 on a 64-bit Server 2008 platform with my Foundation Services server is on different
    Machine. I have installed installed HFM client, Web Application and Services on both the server.
    But i have configured "Deploy to Application Server" on Foundation Server to have a single domain.
    All other configurations are done on the HFM Server only.
    But during to Deployment to application server my "Register with shared services" part fails.
    My foundation services are running. Do i require to Configure DCOM on foundation server also.
    Please suggest me some ways to solve this problem.
    Regards,
    Arvind

    Johan,
    you are right, now the user are given with dba priv ,
    now i am getting the below error,
    (Nov 11, 2008, 05:30:03 AM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Error:
    com.hyperion.cis.config.ProcessingException
    at com.hyperion.ess.EASDBConfigurator.configure(EASDBConfigurator.java:252)
    at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.executeDBConfigTask(RunAllTasksWizardAction.java:282)
    at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.execute(RunAllTasksWizardAction.java:151)
    at com.installshield.wizard.RunnableWizardBeanContext.run(Unknown Source)
    Please let me know your suggestions.
    Thanks,
    bhavani

  • Want to know how to  register performance mgmt arch with shared services

    Hi All
    I didn't find any option under EPMA in configuration utility(except deploy to application server) , how to get the remaining options . Did I make any mistake in downloading the software from edelivery. Why I'm unable to see the other options(cofig db, reg with shared services).. Basically where I will find the EPMA software.
    thank You
    regards
    M.V

    Transfer an Adobe product license
    Mylenium

  • 'register with shared services' option missing while configuring eas

    I am facing some issues while configuring a new epm system:
    While configuring eas 11.1.2.0, I am not getting the option' Register with Shared Services'. but otherwise, the configuration is successful. As a result, I don't see the Business Rules option in Shared Services/Application Groups. But we are able to use eas console and do see business rules node in eas console.
    How do I get configurator to show this option?
    I was able to configure and register all other Hyperion applications.
    Thanks,
    Edited by: 784749 on Mar 28, 2012 12:35 PM
    Edited by: 784749 on Mar 28, 2012 12:59 PM

    One way is to use the registry tool though make sure you backup the shared services database before running the utility.
    It is located in <MIDDLEWARE_HOME>/user_projects/<instancename>/bin
    to change the status for EAS for HSS then run the following
    epmsys_registry updateproperty BUSINESS_RULES_PRODUCT/system_tasks_configuration/@hubRegistration Pending
    Now if you run the configurator again it should let you select just Essbase Administration Services, you dont need to select the child components.
    It should then registry with Shared Services.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Failure to register with Shared Services

    Planning 9.3.1 At Time = 0, we had created groups in Shared Services that were provisioned to our planning app. We could see the groups and corresponding uses come through into planning. Now at Time = 1, we notice that in Shared Services our planning app does not appear in the Planning projects folder. In Application Settings, the Shared Services URL still shows up in the Shares Services URL field, but attempting to Register with Shared Services yields the msg "Unable to Register with Shared Services".
    Note, between T=0 and T= 1, we did not do any migration or configuration changes that I'm aware of.
    Any thoughts on how to fix?
    Thanks

    I solved the problem myself. I had to unregister with Shared Services, then reregister, and then the app reappeared in the Planning projects in Shared Services. Not sure why the app go confused with Shared Services in the first place.

Maybe you are looking for