How to register Lenovo B570 for warranty in the UK?

Having bought a new B570 just before this new year (28th Dec 2011), I am still finding it impossible to register this laptop.
After reading a message from someone that they had a crack appear on their B570's screen, I am very concerned - that I am yet unable to register my laptop properly.
Apparantly there is a base warranty which starts from the manufacturing date for one year but we all are supposed to register and get this changed to last till one year from the date of our actual purchase.  But when I try to register on-line I get transfereed between various lenovo sites and finally the registration fails.
Apparently my Lenovo B570 is called as Ideapad in the Singapore region and I get directed to that website - but I am in the UK and in the on-line registration form, I don't see any European nor USA - on the UK specific site there is no form where I can register for this 'my own warranty' rather than the 'base warranty' - in my case it turns out my laptop was manufactured a few months ago and the base warranty would not last for one full year after my purchase - this is not fair.
I have been sending emails and so on - but not getting any positive response at all.
How do I register for proper warranty please?

hey vlbaindoor,
i'm guessing that you bought the B570, from Singapore?
Do note that in the International Warranty Page >> http://support.lenovo.com/en_US/product-service/iws.page?
The B570 , did not list UK and therefore not eligible for International Warranty.
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
Have you checked out the Community Knowledgebase yet?!
How to send a private message? --> Check out this article.

Similar Messages

  • If my ipad was stolen, how to register my ipad for the stolen goods, and lock the hardware requirements?

    If my ipad was stolen, how to register my ipad for the stolen goods, and lock the hardware requirements?

    It's really disappointing as a newly converted Apple customer who has already had his iPad stolen, that Apple just sits back and let's this happen. 
    I've viewed a number of posts regarding stolen iPads.  Yes, I did have the "find my iPad" enabled.  That's how I knew when the iPad was gone for good.  It's a useless function in the case of theft because the thieves know how to hack into your iPad.  It disappeared from my list of devices in the "find my iPad" utility that very same day. 
    Apple loves the fact that their devices get stolen all the time!  That way they sell more of them.  Theft could easily be significantly reduced if Apple chose to give users a means to report stolen devices on the Apple site.  They choose not to do this.  If the black market for Apple devices was limited to hackers who know they have a stolen device, the items wouldn't be such a hot commodity!  Apple knows this... I guess they want to get their devices into as many households as they can.... Legally or not. 
    So for all you hard working folks out there, find a way to make sure your Apple products are secure because if they get stolen, you're out of luck.  Apple refuses to help when they could easily do so. 

  • Where do I register my Blackberry for warranty?

    I have been all over the blackberry.com web site looking for where I register my phone for warranty purposes. Where is it? Thanks.

    Hiya!
    Just to expand on what Bill said. Yes your carrier would expedite the warranty for the manufacturer. however, if you buy it from a third party source (ebay, craigslist, etc) they may not be able to. Just to set that expectation.
    But the only way to know for sure it to call your carrier directly as Bill had mentioned.
    1). Please thank those who help you by clicking the beside the 'Reply' button.
    2). If your issue has been solved, please resolve it by marking "Accept as Solution" on the correct post!
    3). Remember to have fun! We are all in this together!
    4). Follow me on

  • How to register a Mobile device Id in the netweaver Administer login?

    Hello all,
                 How to register a Mobile device Id in the netweaver Administer login?
    I logged in as J2ee_admin and I see SAP Mobile Infrastructure under the Administration adn underneath I see Mobile device releated configurations But there I don't see any options for creating a entry for registering a mobile device.
    How can we register a mobile device/laptop there???
    Thanks for your help in advance.
    Thanks,
    Greetson

    Hi Greetson,
    well, if you open the NWA and select
    "Mobile Infrastructure->Device Maintenance", search for all devices.
    Select the deviceId you are interested in, then in the bottom part of the screen you will find some informations of the device. Open the second tab ("Mobile Components"). You should see "MobileEngine JSP" there as entry. Correct so far?
    Then there is a button "Add/Remove"
    If you select that button a new window opens. In there you can select the component you want to install on the device. Please enter the username as well - this is mandatory for the assignment. Well, then press add and the entry occures in the list at the bottom of the screen.
    Next Sync - app comes down to the device.
    Oh - before this can happen, you have to deploy the SDA file on the J2EE - but this is a logical step I guess.
    Hope this helps to solve the issue
    Regards,
    Oliver

  • I have an external hard drive that was formatted by a PC and has files and directories etc. I want to format it and use it on my IMAC for backup but I can't seem to write to it nor can I delete current content. How do I initialize it for use with the MAC?

    I have an external hard drive that was formatted by a PC and has files and directories copied to it etc. I want to use it on my IMAC for backup. I see it on my my IMAC . I can open files etc.  But I can't seem to write to it nor can I delete current content. I don't care if I lose current content. How do I initialize it for use with the MAC?

    You can't write to it because it's formatted as NTFS which OS X will read but not write to. If you want to continue using the drive with both a PC and OS X you will need to download and install NTFS-3G so you can then write to it from your Mac. You can get NTFS-3G at:
    http://www.macupdate.com/app/mac/24481/ntfs-3g
    If you want to use the drive exclusively with your Mac then move the data off it and reformat it in Disk Utility (Applications - Utilities - Disk Utilities) as Mac OS Extended (Journaled.)

  • How can you get audio for  books on the kindle

    how can you get audio for  books on the kindle

    The audio inputs on Macs are line level inputs and not mic inputs.  You need a mic with a built in preamp (battery powered) or more conveniently a USB mic or bluetooth headset.

  • How can I add keywords for SEO into the code?

    How can I add keywords (for SEO) into the code of a Muse designed site?

    You might also be interested in the upcoming MuseJam on Thursday Muse Jam: Search Engine Optimization | Facebook
    Muse Jam: Search Engine Optimization
    Online May 22, 2013
    Join Principal Product Manager Dani Beaumont of the Adobe Muse team as she explores ways within the Muse application to build search engine optimized sites by way of metadata, keywords, H1 definitions, and sitemap generation. After the presentation we'll open the floor to any questions you might with the application.

  • How can I purchase items for app when the app was loaded on another ID before? I has to Chang my AppleID and also transferred an app to new phone. I can't purchase items for app because it wants me to buy the app through new ID. The app was free.

    How can I purchase items for app when the app was loaded on another ID before? I has to Chang my AppleID and also transferred an app to new phone. I can't purchase items for app because it wants me to buy the app through new ID. The app was free.

    All apps (and other content from the store) are tied to the account that downloaded them, whether or not they are free. To do in-app purchases in that app you will either need to log in with the account that downloaded it, or delete it (which will delete its content) and download it with your currently logged in account if you want to do IAPs on that account.

  • Wie lange haben Apple Produkte Garantie in der EU? How long do Apple products have warranty in the EU?

    Auf dieser Webseite ist die Garantiezeit der Apple Produkte beschrieben. https://www.apple.com/de/legal/statutory-warranty/
    Haben nun Produkte von Apple in der EU 2 Jahre Garantie oder nur ein Jahr?
    Es ist nicht verständlich für alle.
    On this webpage the duration of warranty in the EU is stated. https://www.apple.com/de/legal/statutory-warranty/
    Do Apple products have 2 years warranty in the EU or just one?
    This is unclear for everybody.

    Die Garantie beträgt in der EU ein Jahr, kann aber durch einen kostenpflichtigen Apple Care Plan verlängert werden.
    Wie lange ist mein iPhone durch die Apple-Garantie abgedeckt?
    Das iPhone ist durch die beschränkte Apple-Garantie ein Jahr lang abgedeckt. Der Garantieservice für infrage kommende Reparaturen steht Ihnen für zwölf Monate ab dem ursprünglichen Kaufdatum kostenlos zur Verfügung.
    Die Leistungen aus der beschränkten Apple-Garantie und aus AppleCare-Produkten verstehen sich zusätzlich zu der gesetzlichen Gewährleistung in der EU. Hier finden Sie weitere Informationen.
    How long is my iPhone covered by Apple’s warranty?
    Apple's Limited Warranty for iPhone covers your iPhone for one year. Warranty service for eligible repairs is available at no charge for twelve months from the date of original retail purchase ("date of purchase").
    Apple's Limited Warranty and AppleCare product benefits are in addition to rights provided by the EU statutory warranty. Learn more.
    copied from Apple - Support - Service Answer Center

  • Possible to register a Proxy for FTP in the FTP-Communication-Channel ???

    Hi All,
    I have a question regarding the ftp-receiver-communication-channel.
    I have configured an integration scenario for a file-transfer via ftp to New York. I use the File/FTP-Adapter from SAP. I send the files in the passive ftp mode, but only the filename (no content) is created at the ftp server in new york. we get the error: 425 --- Can't open data connection. The Firewall and so on is open for this process and we tested it from other servers. There occurred always the same exception. We have no idea where the mistake could be.
    When we arrange FTP-connects with a ftp-programm (for example WS_FTP) we use a proxy. And it's working.
    Here my Question:
    Is it possible to register a proxy / ftp-proxy in the xi-system or in the File/FTP-Adapter?
    Thanks and best regards
    Christopher

    When you connect to any FTP server it writes some dump to your local system first then opens the data connection. So check whether you have provided neccessary rights on the XI server so that it writes to the local system...
       I think thats when it throws that error...
       Also check whether you have opened necessary ports...it uses port 21and 1024+ ports for passive connections and 21 and 23 for active connections....
       Are you connecting to the other ports rather than standard port 21....then also try connecting through port 21 because if you use other ports it won't work sometimes. Its worth trying with port 21 because if FTP is on UNIX box....the inet daemon on unix box automatically reroutes to the appropriate port after it recieves the connection from port 21.
          And also did you tried connecting to FTP server through you XI server using some other FTP client.
    Hope this helps...
    Regards,
    ravi

  • RG1 register register updation prob for some of the deivery docs.

    Dear All,
    While updating the RG1 register for classification type IDH,
    on simulation system is giving red signal  for some of the documents.
    Can any one pur some light on this issue.And guide me what i have to do?
    I like knwo for which movement type which  classification we have to used.
    The issue issue is very urgent as we have to submit the register with the excise department.
    Thanks in advance.
    deepti

    Hi shyam,
    Did you got the answer for your question if so please tell me the solution since i am also facing same problem.
    thanks
    Srinivas

  • How to use custumer DataTagsLibrary for BC4J in the JSP's with Struts Suppo

    I've been looking for a good tutorial to learn very well
    BC4J, DataTags Library for JSP , all with struts support.
    But it's dificult to join all this topics.
    Can someone help.
    If you have any answer for me, plesea send an e-mail to
    [email protected]

    Try these links:
    http://radio.weblogs.com/0118231/ - Look for the Toy Store demo.
    http://otn.oracle.com/sample_code/tutorials/bc4jvsm/content.html - The new Shopping Mall tutorial.
    http://otn.oracle.com/products/jdev/howtos/content.html - The JDeveloper how to list.
    Also, check frequently on the JDeveloper forum here on OTN.
    HTH.
    Thanks, George

  • How to show serial umber for each of the record in a table stating with 1.

    I want to show serial number starting from 1 for each of the row in the table. Is there any why to achieve this in OBIEE answers?

    simple.. take a dummy col and put formula RCOUNT(1)

  • How To Register/Sign Up For The Forum - Video

    You can search for available solutions in the Forum as much as you want.
    However, if you need to ask a question in the forum or answer to somebody’s post, you need to be a member of the community. It is very easy to register in our Forum and the new registration process is even more compact than before.
    There are just 3 simple steps to be followed, to get registered.
    Step 1 - Open the online Registration form:
    On the top right, click on the Register link.
    This will open a short online form, which takes you to the next step.
    Step 2 - Fill your basic personal details:
    The form will have several fields for you to fill, all of which are mandatory. All the information entered here will not be publicly visible and only be used in HP Forum's internal database. 
    The most important field among this, is the email address. If you forget your password in future, this will be handy to reset it. Also any alert or notification from the Forum, including your future topic subscriptions will be sent to this email ID.So, please choose wisely.
    Once the form is filled, click on the  button. Now, you are almost done.
    Step 3 - Choose your Screen Name:
    Finally, you will be asked to choose your screen name, which will be your identity in the Forum. Write your desired name and then click on  button.
    Congratulations! You are now a member of our community! 
    The complete process is demonstrated here in this short video.
    To learn how to create an effective post in the Forum - please check the following thread:
    How To Make A Post
    I work for HP, supporting HP experts and trying to help this community as much as I can.

    I think there will be a link in this... Cloud Plans https://www.adobe.com/products/creativecloud/buying-guide.html

  • How do I contact hp for warranty repairs

    I need to contact HP for repairs.  My Officejet is under warranty.  I am in Charlotte, NC.  The website says there are no service centers within 100 miles of me.  How do I contact HP?  Is there a phone number or email?  Every time I try the contact us on the support website it just throws me into an endless loop.
    This question was solved.
    View Solution.

    google provided me with 1-800-474-6836 which you cannot find on this website.

Maybe you are looking for

  • Lost pages within a file

    My FW file contained 21 pages (1 month to build). This morning as I was starting to slice on my first page, an internal error popped up and froze the app. There was no way out other than a system restart. When I went back to the file, 14 pages were g

  • My tpl file are no longer opening with TextEdit but with Stickies...Why?

    Hello, The strangest thing just happened and it must be a coincidence or some sort of glitch. I recently tried an LCD monitor on my Mac (which incidentally I just found out first hand why NOT to buy inexpensive LCD monitors). I disconnected it, hooke

  • Simulate a test program at system level

    Hi,   Is there a simulation tool or methodology that can be used to simulate a TestStand test program? I could create a behavioral model of the Device Under Test, but the difficulty I see is the interfacing of the model with the instrumentation drive

  • Error "ERROR_PERIOD_VERSION" when loading DTP  - Abap short dump

    Hi, I got this Error when loading with DTP. it occured in the transformation end routine. I have this function module in my End routine. * REBW_FIRST_DAY_OF_PERIOD_GET* Information on where terminated     Termination occurred in the ABAP program "SAP

  • COGS Vs COGS GL Balance reconciliation

    Hi friends, Do we have any standard report which compiles for the period of cost goods sold ( I.e Deliveries , third party deliveries etc) vs Cost of goods sold GL balance ? Regards, LR