How to register my version of aperture 3 in app store, how to register my version of aperture 3 in app store

I have a registed version of aperture 3 from before app store - but in app store it is not registered as installed ? how can I register my version in App Store :-)
/Kenneth

If you bought Aperture prior to the App Store then there is no way to (or need to) register at the App Store. You'll continue to receive updates to Aperture through the normal Software Update stream.
There would be no benefit to connecting the version you have to the App Store.
regards

Similar Messages

How to register aperture 3 trial version to get serial number

How do I get a serial number for the Aperture 3 trial version I have downloaded? They say to register, but I see no place to register when I open the link provided. I do not want to down load this thing again due to band width limitations.
Thank you for any help with this.
Andrew

Andrew,
As far as I know, they don't sell the S/N anymore other than you can buy the retail box from the online Apple Store. The retail box comes with a serial number you can enter without de-installing the trial. But as you'll see if you click the link, it will cost you $199 to get that box with a serial number. (Back when you could buy just a serial number, it also cost $199) (They also have the upgrade version box for $99 that requires you have a S/N from any prior version)
The Mac App Store Aperture is only $80 and you don't have to mess with a serial number. And if you use it for personal use, the license allows you to install it on any computer you own, no limits. (For commercial use the license is similar to the boxed version).
Tom

How can I completely remove a plug-in from Aperture 2.4. Installing latest plug-in from HDR does not register with Aperture.

How can I completely remove a plug-in from Aperture 2.4. Installing latest plug-in from HDR does not register with Aperture.

It is not a good idea, to manually delete registry keys. Java uninstaller removes all registry entries that are needed to perform clean future installation.
You might see some of the keys not removed by Java unistaller but they do not prevent any user from doing fresh installation of Java in future.
Java removal tool is currently being developed, but that is for removing old/unsecure and unsupported Java versions. The tool isn't really intended to remove current/above security baseline versions of Java.
Also, the tool does a standard un-install using msiexec /x. It won't specifically delete registry keys - it lets msiexec do it.

My aperture library lives on an external hard drive that is corrupt and I can not locate the library. I do have it backed up with TM. How do I safely restore the library from TM to my laptop? I am using the newest version of aperture on my macbook pr

My aperture library lives on an external hard drive that is corrupt and I can not locate the library. I do have it backed up with TM. How do I safely restore the library from TM to my laptop? I am using the newest version of aperture on my macbook pro.

Hello Sandra,
The article linked below details how to go about restoring items from Time Machine in Snow Leopard.
Mac OS X 10.6: Recovering items using Time Machine and Spotlight
http://support.apple.com/kb/PH6379
Sincerely,
Allen

How do you transfer photos from an older version of Aperture to 2.1?

I used to have Aperture 1.5, and then got 2.0 when it came out.
I still have 1.5(or whatever the exact version is) on my computer separate from 2.1, and with it, all of its photos.
How do I transfer them to the current Aperture, which I frequently use?
Thanks in advance for replies.

I was about to post to ask Paul what advantage there is in Exporting/Importing Projects over simply converting the Library as kbeat suggests.
Then I reread the original post and realized that what you are trying to do is combine the two libraries.
If that's the case, Paul has given you the answer.
DLS
Message was edited by: MacDLS

I recently upgraded to Yosemite 10.10.2 and Aperture 2.1.4 will no longer open. I cannot access my photos and I don't want to pay for latest version of Aperture since this application is no longer going to be supported. How can I get my pictures?

I recently upgraded to Yosemite 10.10.2 and Aperture 2.1.4 will no longer open. I cannot access my photos and I don't want to pay for latest version of Aperture since this application is no longer going to be supported. How can I get my pictures?

If you want just the originals, then you can go into the Aperture library (right click on it and do "show package contents"). Inside is a directory called "Masters" and you can find the original files in a bunch of subfolders.
But... you'll lose all adjustments, keywords, and other information, and just have the files as they were imported originally from the cameras.
Easiest is probably to buy Aperture and update everything, and then migrate to the Photos application down the road if that's what you want. Aperture 3.0 came out in 2010 (five years ago!) so it's not like you've upgraded in a while

How do I reinstall an older version of Aperture from the App Store?

Hello,
I have an older Macbook - 13 inch early 2008. It is still running fine on 10.7.5 Lion, but can't update to a later version of OS X, as it is not compatible. I have Aperture 3.4.5, which I purchased from the App Store.
Following a hard disk problem, I've reinstalled the laptop, used software update to get all the latest patches, and have recovered my files and applications from my Time Machine Backup. Unfortunately, Aperture is no longer able to open files from my Sony Nex camera ("Unsupported Image Format" message") even though it worked before I rebuilt my Mac, and is listed as supported under Aperture 3.4.5. I've done all of the "Repair permissions", "repair database" and "Rebuild Database" things, but it hasn't helped.
I've tried to fix this by removing Aperture (in case my Time Machine backup version is in some way corrupted) and reinstalled from the App Store, but the App Store won't let me have Aperture anymore, even though I've paid for it, because my system is no longer compatible with the current version, 3.5. I can't see a way of downloading a full copy of the older version compatible with my system. I can see updates for Aperture listed at http://support.apple.com/downloads/#aperture, including Aperture 3.4.5, but these require a copy of Aperture 3.0 or later already installed to update, and even if I run the 3.4.5 update, it tells me it won't work because my copy of Aperture is from the App store.
Can anyone help me find a way of navigating the App Store or Apple web site to get the copy of Aperture 3.4.5 I have licensed from Apple?
Many thanks.

@léonie
Thanks for your help with this. I've downloaded the latest RAW support updates supported on my machine - V4.09 that seems to contain all of the RAW formats for previous updated including V4.06, which includes the NEX 3N, my camera. After a short while (there seemed to be some sort of background processing ging on in Aperture) it started to allow my NEX 3N photos to be viewed. Some of the thumbnails were corrupted, but if I made a slight edit in each of these files, the thumbnails updated and all was well.
Prior to this, I raised a call with Apple, because the inability to reinstall software from the App Store that I've purchased from in App Store to a machine that supports OSX 10.7.5 and no later strikes me as a problem. I need to know that if my Time Machine backup fails and I need to reinstall, I've got somewhere I can go.
The support people at Apple were very helpful, and it feels like they recognise this as a problem, and are working to resolve it behind the scenes. The App Store will not allow me to download the last version that works on my machine at the moment, but it sounds like Apple is thinking about how to do this. In the meantime, they are shipping me a copy of Aperture 3.0 on CD, and sending me a registration code. This will solve my immediate problem.
This does make me wary about using the App Store for purchases in the future. I don't upgrade my hardware that frequently - I have no real need to as it just keeps working - and so not having physical copies of installation media for when the applications stop supporting my OS is a worry. On the face of it, maintaining prior versions of the software for older machines to download from the App Store seems like a reasonable solution, but they are not there yet, and there is no real commitment for them to do this. Anyone who doesn't back up their Apps in Time Machine (probably the majority of users) could loose them altogether when Apple moves on, and cuts app support for older OS versions.
Thanks to @léonie and @Frank Cagianno for your help.
Andy

How Can I update my app new version to the registered devices

Well, we have developed an in-house app using the Unity3d Game Engine. I'm using a Developer Enterprise account, and have already created the proper certificates, registered the devices (7 ipads) and generated the provisioning Profile. I have already clicked in the 'build an run', and the Unity Engine builds the app, that after is opened at the Xcode. I havel already fixed the bugs, and the app is working properly at the ipads.
The problem is, I will need to Update the app, and I need to Update them without have to get them and build them at my own Mac, since they do not stay with me. I've been strugling with that for a while. I have downloaded the provisioning profile and sent by e-mail to one of the ipads, the one I'm using to test, and instaled it, but the version of my app have not been updated.
I checked on my app icloud capabilities. The page about the Update of in-house apps is not very clear(http://help.apple.com/iosdeployment-apps/mac/1.1/#app43ad802c), and I'm new in the development for IOS.
How can update my app at this Ipads? Is there any step-by-step to follow, more eplanatory that the link above?

I didn't explained it correctly, I mean without getting the ipads, not the source code. I mean, at every time I need to launch a new version of the app, how can I update it through the internet, because I have installed my app running it at the ipads with the xcode, by usb. I'm using the enterprise program, so, as far as I know, the update is not through apple store.
The ipads are in use, and I'd like to update them without have to get them to install it myself. Hope I have explained it better this time. Thank you for your help.

On imac 10.6.8 using current version of Aperture. How can I access the Aperture Library on my external hard drive that I use with time machine for backup? I can only access the application but not the library..

On imac 10.6.8 using current version of Aperture. How can I access the Aperture Library on my external hard drive that I use with time machine for backup? I can only access the application but not the library..

Go into Time Machine (the program not the bundle on the extrnal disk) and using Time Machine's browser go to the Folder where the library lives. You could look in the library bundle in Time Machine but that won't really tell you much,
If you want to make sure it truely has backed up your library you will need to restore it and open the restored library with Aperture.
If all this still has you confused you need to read up on Time Machine in order to get a feel for how it works, for what it is doing and for how to restore files from it.

How can I attribute my edits before aperture to the raw files as versions?

Hi,
I am in the middle of importing all my files (approx 100,000) into aperture. I have previously made edits of my best images and in some cases have several edits for one 'master' file. How can I attribute or link the edits to the master files? I have followed a simple nomenclature, where the camera raw file was say bfes1001.tif, I would name the files bfes1001e1.psd or bfes10001e1-small.jpg, bfes1001e1-epson7600.psd. So my question is really two parts, first is there a way to link my old edits to the master raw files, and secondly is there a way to import photoshop files without flattening them? I can't image throwing away all that time making masks etc. If there is no way to import a layered photoshop file then is there a way to make an association to the files if I leave them outside of Aperture (althought that seems to defeat a big part of Aperture)?
Thanks,
Eric

This is not a method suited to automation, but what you can do is:
1) Import original RAW into Aperture.
2) Edit in external editor - it creates a new version based on PSD or TIFF (you choose in options).
3) Kill external editor, replace created TIFF file with your new "master" tiff (or PSD). To do this just open the Aperture Library package using "Show Package Contents" in finder, do the same for the Project package held within the library, and finding the new TIFF version of your file. You could either replace the TIFF file before you return to Aperture form the editor or replace all the TIFF files with Aperture closed. The name must be identical. If you have a TIFF or PSD not in RGB mode Aperture will not like you much and probably crash whenever you go to view the picture.
That seems the most space-efficient way to me and keeps Aperture understanding that your edited TIFFS are versions of a particular master.

How do I find where the master file for a version in aperture 3

I was wondering how to find where the original master image is in the aperture 3 library. For instance we have several images that are in different albums and folders but are trying to find where the original image is in the library.

Is your Library managed or referenced?
If your library is referenced, then you can reveal the master image file by selecting the image in the browser and selecting "File -> Show in Finder" from the menu.
If your library is managed you will have to open the Library package to see the master image files: Ctrl-click the Aperture library and select "Show Package Contents" from the Pop-up menu. Then browse the folder "Masters", but very carefully - don't change anything inside the package! The Masters-folder is arranged by date: year, month, day ...
But you can always look at the master image files from inside Aperture - much safer: Select any image and type "m" - that will show you what the master image file is like - type "m" again to view the version.
Regards
Léonie

How can I create a slideshow that depicts only a version of a photo rather than the original? Since the original and new versions are saved together, the aperture slideshow often choices the original rather than the desired version to display/

How can I create a slideshow that depicts only a version of a photo rather than the original? Since the original and new versions are saved together, the aperture slideshow often choices the original rather than the desired version to display.

There are two things we use the name "Slideshow" for in Aperture: a Slideshow Album, used for making Slideshows, and the Slideshow that is made. (Imho, it is a design mistake to not call the containers used to create Slideshows, Books, etc., "Albums".)
The Slideshow will use the Album Pick from any Stack. A good way to use Aperture is to promote the Image you want to regularly use (such as, for example, a Version with adjustments) to the top of the Stack. This makes it the Stack Pick, and will be the default Album Pick. If you haven't done that, you can still change the Album Pick for any Stack in a Slideshow Album. Expand your Stack(s), select the Image in each Stack that you want to be the Album Pick (and thus shown in the Slideshow), and "Stacks➞Set Album Pick". (Note the keyboard shortcut; there is also a Toolbar icon for this.) The change is immediate. The Slideshow will always show the Album Pick (or, if there is not one, the Stack Pick) for every Stack in your Slideshow Album.

How to upgrade a Library on an external drive created in a previous version of aperture so I can re-import it from the external drive into Aperture 3.5.1 on my MBP ?

I have exported earlier Projects [which were created in Aperture 3.4.5] to an external hard drive. Now I wish to reimport them into Aperture 3.5.1 - which I use after having upgraded to Mavericks - but am given an error message saying I can’t reimport because the external drive is storing a Library created by an earlier version of Aperture than I’m using now. It tells me to upgrade that externally stored Library.
The Question - one can only upgrade a Library on one’s computer, not on the external drive. How can I upgrade it if I can’t get it back into Aperture [3.5.1] on my MacBookPro in the first place ?
Thank you
Bob

The Question - one can only upgrade a Library on one’s computer, not on the external drive. How can I upgrade it if I can’t get it back into Aperture [3.5.1] on my MacBookPro in the first place ?
You can upgrade the library on the external drive. Connect your external drive to your computer.
Then select the library with the exported projects on the external drive and double-click it to open it in Aperture. This will upgrade the library to Aperture 3.5.1. Since upgrading can sometimes be problematic, I recommend to make a backup copy of the library before you try to upgrade the library.
After that you should be able to merge the library into your main library using File > Import.

I don't know what I did, but Aperture no longer sees my HD as online, and I can't get my photo versions since the HD is not online. I see it in Finder, but Aperture no longer recognizes it. Does someone know how to fix this?

I don't know what I did, but Aperture no longer sees my HD as online, and I can't get my photo versions since the HD is not online. I see it in Finder and can see the original files and even copy them from Finder, but Aperture no longer recognizes the HD, and when I try to work with the picture, it doesn't let me because it says that the master is in a volume that's offline. Does someone know how to fix this?

Just to clarify:
Does Aperture not see the drive at all (that is, does Aperture also not see the drive in the import and export dialogue) or are only the Master Files disconnected?
If Aperture does not recognize the drive at all, check the permission settings of the drive in the "Get Info" panel and make sure you have read/write access, also the "Ignore ownership on this volumn" checkmark, this should be set.
If correcting the permissions does not help, make sure you have a backup, and then use "Disk Utility" to run a check and to repair the volumn, if necessary.
If Aperture can see the drive on import and export, but only does not see the master image files, then try to reconnect your masters.
Create a smart album or use a Search with the rule: "File status: offline", to select all images that need reconnecting to their masters.
Right click on the first image of the selection.
From the Pop-up window select "Locate referenced Files..."
Now the "Reconnect All" button should appear.
Click it.

CS2, I loved it but now after a computer death and a new install on a new PC the registration program won't take the code and continually needs to bee registered, how do I fix it without buying a new version.

Some time back I was in college and purchased a copy of CS2, I loved it but now after a computer death and a new install on a new PC the registration program won't take the code and continually needs to bee registered, how do I fix it without buying a new version.

Oh, for Pete's sake, folks! The forum FAQs state very clearly that posters should always perform a forum search BEFORE POSTING.
This question has been asked and answered here ad nauseam here. I'll bet there are dozens of such questions here in the last few months.
How To Get Help Quickly
Before you Post:
Firstly - have you really checked the 'help' option in the program? Many problems can be solved far faster by getting the answer from the Help File.
Secondly - check the Forum FAQ folder. There's advice there on many common questions and problems
Thirdly - use the 'Knowledgebase Search' option near the top of this page. Or you can click here to go to the relevant page and enter your search words there - or just search for 'Photoshop' there to see summaries of all the relevant items.

How to register my version of aperture 3 in app store, how to register my version of aperture 3 in app store

Similar Messages

Maybe you are looking for