How to register orclXDB services
I have a 10.2.0.3 database on Unix.
I am trying to set XML DB to work on. This is the services that I have, How can I register service "aps2XDB" here ?
LSNRCTL> services
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=bess)(PORT=1526)))
Services Summary...
Service "aps2.com" has 1 instance(s).
Instance "aps2", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:3 refused:0
LOCAL SERVER
The command completed successfully
LSNRCTL>
Thanks!
Hi,
Check metalink note 267288.1.
Since you are not using the default port you shoud define the local_listener parameter in your spfile, pfile, or if possible change to default port 1521 to allow automatic registration...
Edited by: ioan on 6.10.2008 15:23
Similar Messages
-
Regarding How to Register a service in Service Registry ....?
Hi All ,
i have a doubt , hope i may get some answers form the Expert...!
1) Is there any diffrence between registering a Service in SR and Publishing a Service in SR (SAP PI 7.1)?
2) If yes, then can some one pls provide with some more info or links where i can search ?
Thank you in advance,
Regards,
Aziz khan...!Hi Aziz,
ServiceRegistry: The Services Registry is a registry for Web services. Located centrally within an SOA landscape, it contains entries for all services and service definitions in that landscape,with references to the servicesu2019 relevant WSDL metadata and to the locations of the callable service endpoints.
Publishing: By entering the endpoint WSDL of a service definition that provides a valid URL you can publish service definitions to the Services Registry.
From the above definitins i dont think there is any difference between Registering and Publishing.Because Registering in UDDI (service registry ) means giving Acess points to a particular service developed and this process of giving acess to webservices in UDDI is nothing but Publishing.who want to consume then they have to acess those endpoints(action points) through webservices URL
FYI i have not worked on services on PI7.1 but trying to answer your qurey with little conceptual knolwdge on Webservices in PI7.1.As far as registering the services are concerned please refer the following link and let me see wether its useful in any way ....navigate .
http://help.sap.com/saphelp_nwpi71/helpdata/en/45/b4ca147d2952f5e10000000a1553f7/frameset.htm
Serviceregistry----> Tasks---->with references to the servicesu2019 relevant WSDL metadata and to the locations of the callable service endpoints
Thanks,
Ram. -
HI All,
i want to know about how we can register a serivce in Service registry from SAP and Third party ...?
and how we can use that resistry in ESR(Enterprise Service Registry) of SAP PI 7.1...?
Help would be appreciated ....!
Thanks in advace ,
Aziz khanthanks abhishek ,
i have gone through this link provided by you ... this says how to publish a service ....in ESR !
I am completly new to SAP PI 7.1 ... HENCE looking for some more information on how to register a service in SR
and after registring what all thigs we can follow in ESR (Design side ) to make use of those services ...............!
pls any info would appreicated ...!
Thanks
Aziz khan. -
How to register DI RfcSvr as an Windows service
Every time I must manully start DI RfcSvr program on windows. I want to know how to register it as a Windows service?
I try to run below command:
ntscmgr install SAPRFCService -b "D:\Business Objects\BusinessObjects Data Services\bin\rfcsvr.exe" -p "-a DI_SOURCE -g HOST_NAME -x gateway_name"
It successfully register the command to NT service but It can not start. The error message in Event Manager is:
Event ID 7009, Timeout (30000 milliseconds) waiting for the SAPRFCService service to connect. I though this is caused by no return code returned by program rfcsvr.exe.
Anybody has good idea?
TIAHi,
I'm in the same situation, I need to know if it's possible to record DI RFCSVR as a Windows service or not.
When I try to start the service, I get the same error
Event ID 7009, Time (30000 milliseconds) waiting for <name Service> of service to connect.
I have searched without success guides.
Any suggestions. -
How to register HFM aplication with Shared services
Hi,
Version 11.1.2
I am new to this version and asking help how to register HFM application with shared services.
In ver 9.3.1 we register in config utility.
Regards
KumarYou should start the EPM system configurator, it is the same concept as earlier versions, just the look and feel is slightly different.
Cheers
John
http://john-goodwin.blogspot.com/ -
How to register Essbase server with Shared Services?
Hello All,
How to register Essbase server with Shared Services?Hello All,
How to register Essbase server with Shared Services? -
How to register Rest web services in Cold Fusion 9 administration console?
I am building a Rest web service using Cold Fusion 9 and Cold Fusion Builder 3 and now I want to register it on Cold Fusion 9 admin console, but I didn't see any option there as in CF 10 and CF 11 Data Services ---> Rest Web service. So, please tell me how to register my Rest web service in CF 9 either through admin console or through code?
Simple answer: you can't. REST services were a new feature released with CF10. Alternatively, you can use a community-supported framework to provide REST services, such as:
Taffy (a dedicated REST framework)
FW/1 (an MVC framework with REST capabilities)
ColdBox (an MVC framework with REST capabilities)
-Carl V. -
How to register Rest web services in Cold Fusion 9 ?
I am building a Rest web service using Cold Fusion 9 and Cold Fusion Builder 3 and now I want to register it on Cold Fusion 9 admin console, but I didn't see any option there as in CF 10 and CF 11 Data Services ---> Rest Web service. So, please tell me how to register my Rest web service in CF 9 either through admin console or through code?
You've posted this question twice. Please delete this one and people can respond to the other one.
-Carl V. -
how to register EPM11.1.1.2-DIM(POWERCENTER8.1.1SP3) into Shared Services
Edited by: lijin2008 on 2009-5-15 下午12:20how to register EPM11.1.1.2-DIM(POWERCENTER8.1.1SP3) into Shared Services
Edited by: lijin2008 on 2009-5-15 下午12:20 -
How to register(configure) analytics service
Can you please let me know how to register(configure) analytics service?
hi "953059"
953059 wrote:
How to ... in the webcenter portal application development ...Maybe you should try the "WebCenter Portal" forum
at WebCenter Portal
(tip : You can use "Your Control Panel" to make your name visible in forum posts.)
success
Jan Vervecken -
How to re-register Workflow Service in workflow manager 1.0?
I am using SharePoint 2013 Management Shell to re-register my Workflow Service due the following error I am having in Sharepoint Designer 2013:
Microsoft.Workflow.Client.ActivityValidationException: Workflow XAML failed validation due to the following errors: Cannot set unknown member 'CompositeTask.RelatedContentLinkListItemIntegerId'. HTTP headers received from the server - ActivityId: e8e6d4fe-2a4e-41df-a046-a88e93e89e27.
NodeId: FS0008. Scope: /SharePoint/default/5985c481-dbed-409b-ada8-2aa2bfc64a47/08f0ee16-a466-4797-9ee0-4cdc56b27fe7. Client ActivityId : 403fe49c-6f29-f019-9b9c-d69dcbbedef6. ---> System.Net.WebException: The remot
Problem is that I don't seem to have connection when it comes to indicate the WorkflowUri
Can this error be fixed in any other way?First you have to clean up
The clean up process is pretty easy, but as always I warn you against making changes to your systems if you are unsure of
the repercussions of doing it incorrectly. Additionally, removing / un-registering Workflow Services can halt, break, etc Workflows in the Farm.
Un-register the Workflow Service for the site
Navigate to Central Administration > Security > Manage Trust
Highlight the row by clicking the anchor link, it doesn’t work like other row selections in SharePoint (rather annoyingly)
Click Delete from the ribbon
Repeat steps 2 and 3 until all the “unfriendly” entries (assuming you’re not already using some)
Enjoy the nice clean Manage Trust pane
Next register it again with below PS command
Register-SPWorkflowService -SPSite 'https://myhost/mysite' -WorkflowHostUri 'https://workflowhost:12990' -
How to Register as a Developer on SAP NetWeaver ABAP 7.02 Trial Version
Hi Everyone,
I was following a tutorial on ABAP and this centred on "Hello World" application. I got a message that I haven't been registered as a Developer on the system and that I need some code from OSS. I have tried checking here for any clues but it seemed none existed. Can't SAP be a bit more simplified like MS? It really requires lots of effort to get the right help and even at that, helps are not easily come by. I really which someone would point me in the right direction this time.
Thank you.plz can u answer me to solve my problem... i download SAP Netweaver 7.02 and install it ...... when log on to SAP i can not make any think ..... SAP tell me You are not registered as a developer ... please register in the online service system (OSS). in the OSS you will receive an access key.
i log on by
DDIC and BCUSER
and i have the same problem
PLZ tell me how can registered my self as a developer on sap to get access key ..? -
J2Se receiver File adapter-HTTP 503 no listener registered for service
Hi,
We are using J2Se file adapter for one the interfaces and the logs of the J2se adapter engine has shown the following error-
Error: com.sap.aii.messaging.net.TransportException: HTTP 503 no listener registered for service /file/example_outbound
at com.sap.aii.messaging.net.HTTPRequest.run(ServerHttpImpl.java:416)
I checked with the J2SE File/FTP receiver adapter configuration given at help.sap and found the following the following info related to the error-
Specifications for addressing by the Integration Engine
○ XI.httpPort=<port_no>
<port_no>specifies the HTTP server port that receives the messages from the Integration Engine.
○ XI.httpService=<service>
<service> describes the service part of the address where the Integration Engine must send its messages.
These specifications are mandatory.
If, for example, you have specified XI.httpPort=1234 and XI.httpService=/file/Receiver, the end point address of the file/FTP adapter in the Integration Engine must be specified as follows:
http://<fileadapterhost>:1234/file/Receiver
The end point address must be extended as follows for the Integration Engine in Release 1.0:
http://<fileadapterhost>:1234/file/Receiver?action=execute&pipelineid=Receiver
If the Integration Engine message is sent to a non-specified adapter service, the system displays the following error message:
*No registered listener for <Service> found*
The system displays the same message if the adapter is initialized, but has not been started (status STOPPED or INITIALIZED).
Where I need to check this Integration engine address specifications. I have't found any of the above code in the adapter configuration which we are using presently.The interface is running successfully before but thrown this error now.
Please reply me if some one has faced similar issue and get it resolved.Hi
How was this issue resolved? I have the same problem.
I only have two receivers - the deafult j2se file receiver and my newly created one which used the default as a template. The ports and service's are different.
I've even tried deleting my custom receive adapter and using only the default one but i still get that error. -
HT4623 How to register my iPad?
How to register my ipad?
Hey Me t,
Thanks for the question. You may find the following information helpful:
Do I need to register my Apple product?
http://support.apple.com/kb/HT5803
Registering Apple products is not required for service and support. Service and support for your Apple product are linked to its serial number, which can be located on the device. If you'd like to check the service and support coverage for your Apple mobile device or computer, visit our Check Your Service and Support Coverage page.
Note: If you have purchased an AppleCare Protection Plan, but the plan has not been enrolled yet, you should register it here.
Thanks,
Matt M. -
On all of my SQL Server instances, I can find SQL server error logs that have the same 3 entries below, so while I already know it can, I need a Microsoft document that says "sqlservr.exe" can so I can convince the network guys to grant the service
account for SQL "Write servicePrincipalName: Allow" in AD.
63 2014-06-26 20:24:02.980 Server The SQL Server Network Interface library could not register the Service Principal Name (SPN) [ MSSQLSvc/DFW-MSSQLDW.PathologyPartners.intranet:1433
] for the SQL Server service. Windows return code: 0x2098, state: 20. Failure to register a SPN might cause integrated authentication to use NTLM instead of Kerberos. This is an informational message. Further action is only required if Kerberos authentication
is required by authentication policies and if the SPN has not been manually registered.
61 2014-06-26 20:24:02.970 Server The SQL Server Network Interface library could not register the Service Principal Name (SPN) [ MSSQLSvc/DFW-MSSQLDW.PathologyPartners.intranet:DW
] for the SQL Server service. Windows return code: 0x2098, state: 20. Failure to register a SPN might cause integrated authentication to use NTLM instead of Kerberos. This is an informational message. Further action is only required if Kerberos authentication
is required by authentication policies and if the SPN has not been manually registered.
38 2014-06-26 20:24:02.840 Server SQL Server is attempting to register a Service Principal Name (SPN) for the SQL Server service. Kerberos authentication will not
be possible until a SPN is registered for the SQL Server service. This is an informational message. No user action is required.
Duane LawrenceRefer the below article
http://blogs.msdn.com/b/psssql/archive/2010/03/09/what-spn-do-i-use-and-how-does-it-get-there.aspx
Automatic SPN Registration
When an instance of the SQL Server Database Engine starts, SQL Server tries to register the SPN for the SQL Server service. When the instance is stopped, SQL Server tries to unregister the SPN. For a TCP/IP connection the SPN is registered in the format MSSQLSvc/<FQDN>:<tcpport>.Both
named instances and the default instance are registered as MSSQLSvc, relying on the <tcpport> value to differentiate the instances.
--Prashanth
Maybe you are looking for
-
Failed to retrieve data from the database Database Vendor Code: 2812
Hi everyone Im using Sap Business One Version 2007A SP00 PL49, SQL 2005 and Crystal Reports Basic for Sap Business One (Add on 2.0.0.7). Whenever i try to generate a report from SBO the system displays the following message "Failed to retrieve data f
-
Buying music from other countries
Hi there, I've a problem with an album from India Arie I first found in the EEUU music store, but when I try to buy it, it says my account is only allowed to buy at the Spanish store (where I live), the problem is that this album is not available in
-
Sharepoint can't remove / uninstall app
Trying to deploy apps. my app failed to install, going to the fly out, details, install error is "the remote hosting service is not configured. Details: unable to obtain master key" deploying using visual studio 2012 there is no option in the fly out
-
After updating to ios 7, the photo downloader no longer recognizes my iphone as a device
-
My iphone 3 keeps vibrating and reciving no text or call how do i fix this
my iphone 3 keeps vibrating and reciving no text or call how do i fix this?