How to reinstall APISupport.dll error detected after windows open

I am getting error message after windows open that TB\APISupport\APISupport.dll application could not be found. How shall I remove this error.Regards

Hi @raghavraj ,
Welcome to the HP Support Forums! I did some research into that error message and it appears as if it is a virus or malware. I would recommend that you run your anti-virus and anti-malware software to fix this issue. It appears to be related to a Conduit search program or add-on.
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

Similar Messages

Hi, how to reinstall photoshop cs5 12.0 after a reinstallation to the os (win7)?

hi, how to reinstall photoshop cs5 12.0 after a reinstallation to the os (win7)?

if you follow all 7 steps you can dl a trial here: http://prodesigntools.com/all-adobe-cs5-direct-download-links.html
and activate with your serial.
if you have a problem dl'g, you didn't follow all 7 steps. the most common error involves failing to meticulously follow steps 1,2 and/or 3 (which adds a cookie to your system enabling you to download the correct version from adobe.com).

HT3986 how do you enlarge boot camp partition after windows is installed

how do you enlarge boot camp partition after windows is installed

Welcome to the Apple Support Communities
You can do it with third-party programs, but I don't recommend it because you can damage the hard drive. The best way to do it is to delete your Windows volume and create it again with the size you need

Hello - how do I have more than one app window open at a time on OS X 10.9.1

Hello - how do I have more than one app window open at a time on OS X 10.9.1? I do not want to hold the option key to have multiple apps open on my screen. Thanks.

Barney-15E
Finder enhnacements installed? = no. I did a reinstall of Mavericks, not a full clean install = no help. Searched for "single-app mode" in Spotlight and the web, no luck.
With Safari open on screen, from dock, opened iTunes and Safari does not show on screen. Open Word from doc and iTunes is not on screen.
Attached some screen shots if these help.

Error while using window.open() in JSP page

I am getting error while using window.open() in my JSP page.
This is code in my JSP page,
<h:commandLink onclick="loadContextSensitiveHelp(#{setNewDayStatusBean. cycleStatusViewObject.helpUrl});" value="Help">
function loadContextSensitiveHelp(helpPageName) {
top.consoleRef=window.open('#{facesContext.externalContext.requestContextPath}/main/patient/helpPageName','myconsole',
'width=350,height=250'
+',menubar=0'
+',toolbar=0'
+',status=0'
+',scrollbars=1'
+',resizable=0')
top.consoleRef.document.close()
I am getting the following error in my browser,
type Exception report
message
description The server encountered an internal error () that prevented it from fulfilling this request.
exception
org.apache.jasper.JasperException: /SetNewDayStatus.jsp(69,34) #{..} is not allowed in template text
     org.apache.jasper.compiler.DefaultErrorHandler.jspError(DefaultErrorHandler.java:40)
     org.apache.jasper.compiler.ErrorDispatcher.dispatch(ErrorDispatcher.java:407)
     org.apache.jasper.compiler.ErrorDispatcher.jspError(ErrorDispatcher.java:102)
     org.apache.jasper.compiler.Validator$ValidateVisitor.visit(Validator.java:711)
     org.apache.jasper.compiler.Node$ELExpression.accept(Node.java:935)
     org.apache.jasper.compiler.Node$Nodes.visit(Node.java:2336)
     org.apache.jasper.compiler.Node$Visitor.visitBody(Node.java:2386)
     org.apache.jasper.compiler.Validator$ValidateVisitor.visit(Validator.java:838)
     org.apache.jasper.compiler.Node$CustomTag.accept(Node.java:1507)
     org.apache.jasper.compiler.Node$Nodes.visit(Node.java:2336)
     org.apache.jasper.compiler.Node$Visitor.visitBody(Node.java:2386)
     org.apache.jasper.compiler.Node$Visitor.visit(Node.java:2392)
     org.apache.jasper.compiler.Node$Root.accept(Node.java:489)
     org.apache.jasper.compiler.Node$Nodes.visit(Node.java:2336)
     org.apache.jasper.compiler.Validator.validate(Validator.java:1737)
     org.apache.jasper.compiler.Compiler.generateJava(Compiler.java:178)
     org.apache.jasper.compiler.Compiler.compile(Compiler.java:306)
     org.apache.jasper.compiler.Compiler.compile(Compiler.java:286)
     org.apache.jasper.compiler.Compiler.compile(Compiler.java:273)
     org.apache.jasper.JspCompilationContext.compile(JspCompilationContext.java:566)
     org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:317)
     org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:320)
     org.apache.jasper.servlet.JspServlet.service(JspServlet.java:266)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
     com.sun.faces.context.ExternalContextImpl.dispatch(ExternalContextImpl.java:428)
     com.sun.faces.application.ViewHandlerImpl.executePageToBuildView(ViewHandlerImpl.java:444)
     com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:116)
     com.sun.faces.lifecycle.RenderResponsePhase.execute(RenderResponsePhase.java:106)
     com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:251)
     com.sun.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:144)
     javax.faces.webapp.FacesServlet.service(FacesServlet.java:245)
note The full stack trace of the root cause is available in the Apache Tomcat/6.0.13 logs.
Anyone help me to solve this issue. Thanks............................

I am getting error while using window.open() in my JSP page.
This is code in my JSP page,
<h:commandLink onclick="loadContextSensitiveHelp(#{setNewDayStatusBean. cycleStatusViewObject.helpUrl});" value="Help">
function loadContextSensitiveHelp(helpPageName) {
top.consoleRef=window.open('#{facesContext.externalContext.requestContextPath}/main/patient/helpPageName','myconsole',
'width=350,height=250'
+',menubar=0'
+',toolbar=0'
+',status=0'
+',scrollbars=1'
+',resizable=0')
top.consoleRef.document.close()
I am getting the following error in my browser,
type Exception report
message
description The server encountered an internal error () that prevented it from fulfilling this request.
exception
org.apache.jasper.JasperException: /SetNewDayStatus.jsp(69,34) #{..} is not allowed in template text
     org.apache.jasper.compiler.DefaultErrorHandler.jspError(DefaultErrorHandler.java:40)
     org.apache.jasper.compiler.ErrorDispatcher.dispatch(ErrorDispatcher.java:407)
     org.apache.jasper.compiler.ErrorDispatcher.jspError(ErrorDispatcher.java:102)
     org.apache.jasper.compiler.Validator$ValidateVisitor.visit(Validator.java:711)
     org.apache.jasper.compiler.Node$ELExpression.accept(Node.java:935)
     org.apache.jasper.compiler.Node$Nodes.visit(Node.java:2336)
     org.apache.jasper.compiler.Node$Visitor.visitBody(Node.java:2386)
     org.apache.jasper.compiler.Validator$ValidateVisitor.visit(Validator.java:838)
     org.apache.jasper.compiler.Node$CustomTag.accept(Node.java:1507)
     org.apache.jasper.compiler.Node$Nodes.visit(Node.java:2336)
     org.apache.jasper.compiler.Node$Visitor.visitBody(Node.java:2386)
     org.apache.jasper.compiler.Node$Visitor.visit(Node.java:2392)
     org.apache.jasper.compiler.Node$Root.accept(Node.java:489)
     org.apache.jasper.compiler.Node$Nodes.visit(Node.java:2336)
     org.apache.jasper.compiler.Validator.validate(Validator.java:1737)
     org.apache.jasper.compiler.Compiler.generateJava(Compiler.java:178)
     org.apache.jasper.compiler.Compiler.compile(Compiler.java:306)
     org.apache.jasper.compiler.Compiler.compile(Compiler.java:286)
     org.apache.jasper.compiler.Compiler.compile(Compiler.java:273)
     org.apache.jasper.JspCompilationContext.compile(JspCompilationContext.java:566)
     org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:317)
     org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:320)
     org.apache.jasper.servlet.JspServlet.service(JspServlet.java:266)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
     com.sun.faces.context.ExternalContextImpl.dispatch(ExternalContextImpl.java:428)
     com.sun.faces.application.ViewHandlerImpl.executePageToBuildView(ViewHandlerImpl.java:444)
     com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:116)
     com.sun.faces.lifecycle.RenderResponsePhase.execute(RenderResponsePhase.java:106)
     com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:251)
     com.sun.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:144)
     javax.faces.webapp.FacesServlet.service(FacesServlet.java:245)
note The full stack trace of the root cause is available in the Apache Tomcat/6.0.13 logs.
Anyone help me to solve this issue. Thanks............................

DLL errors @ boot after Lenovo software update. (E530)

Hi, My laptop wanted to do a update of the Lenovo software so I let it.
Now every boot up it comes up with two error windows.
DLL error's
How to get rid of this please?

Doing the first thing helped with the error messages a little bit. Also, editing the WPA networks allowed me to enter the passwords, which also helped a little with connecting when it wakes from sleep. I just ran software update again yesterday, and Apple now has an Airport Extreme update that addresses compatibility issues with WPA and WPA2 protected networks. However, I still had to reboot my router this morning to connect to the internet. Network diagnostics says that its connected to the network but may not be connected to the internet because it has a self-assigned IP address, and this most often occurs after a long period of being turned off or away from the home network connecting just fine on open networks.
The second thing, Applejack, sounds like a nice tool, but I'd prefer that this thing work the way it's supposed to, especially since it's only a few months old. Glad I bought Applecare.

Hal.dll error during/after Win XP SP2 installation

At the moment I'm trying to install Win XP (SP2) into a bootcamp partition. I have a Mac Pro with 4 HDDs.
HDD1: OSX
HDD2: free
HDD3: OSX Data (raid 1)
HDD4: OSX Data (raid 1)
The setup I'd like to have is:
HDD2:
(1) Bootcamp-Partition (NTFS ~75GB)
(2) Bootcamp-Scratch (NTFS ~150GB)
(3) Scratch (HFS+ ~250GB)
I partitioned the disk that way (with FAT32 instead of NTFS) and booted from the Windows install disk. The installer starts, reformats disk (1) to NTFS and copies data onto the disk.
After the first reboot it breaks with hal.dll error. The files are on the disk but boot.ini seems to be corrupt. The "bootcfg" command from the recovery console is not working - it only duplicates the wrong entry in boot.ini.
After the third non-working installation I tried to move the Bootcamp-Partition into the middle, OSX in front:
(1) Scratch (HFS+ ~250GB)
(2) Bootcamp-Partition (NTFS ~75GB)
(3) Bootcamp-Scratch (NTFS ~150GB)
Same error.
Any hints on howto do that? Or will I have to move the Bootcamp-Disk to the end? How to succeed in having the Bootcamp-Scratch as 'D:' in Windows if I swap those two partitions?
BTW: I succeeded to install WinXP on the same disk before. Back then I only had a 75GB Bootcamp-Partition on the disk (no other partition) and had the disk in Bay 3. But I moved it to Bay 2 because of performance problems in Bay3/4 (PIO-mode) and don't want to waste 400GB in the future .

First of all I believe this is not the right place to discuss the issue. This issue is related to the Windows operating system file corruption and I think the physical location of the hard drive is not the cause of the issue.
The hal.dll file is a system file which holds the hardware access layer information and linking the necessary components. This include the information about all the hardware resources for the operating system. What you had done to change the hardware configuration files in the boot.ini looks ok. Also you can try this link.
http://shanegfowler.wordpress.com/2007/01/10/missing-haldll-error-corrupt-bootin i-file-quick-fix/
Hope that helps you........

How to reinstall Microsoft Office for Mac after new hard drive?

Recently I had a problem with my Macbook Pro, and unfortunately had to purchase a new hard drive and have it installed. This also led to the loss of data and other things, such as Microsoft Office for Mac. I know this is an Apple community, but I get better answers here than at the Microsoft communities so I'm hoping someone can help find out how to reinstall Microsoft Office 2013. I logged onto my Microsft account and it says that there is no record of me purchasing Microsoft Office on that account but I know thats the account that it was purchased on, so i cannot get my product key to reinstall it as directed. Someone please help!!!!

Try calling MS support and explaining the situation, maybe they will issue a new key.
1 (800) 642-7676 (Consumer)
Microsoft Corporation, Customer service
24/7 Microsoft Support - Microsoft.MyPhoneSupport.com
Admicrosoft.myphonesupport.com/
1 (855) 698 3249
Phone Our Tech Support Experts 24/7 For Microsoft Support. Call Now...
Support for Microsoft? - Call Toll Free Now
Adwww.supportdeskwiz.com/Microsoft
1 (855) 760 8099
24x7 Tech Support for Microsoft by SDW.
Microsoft Windows Support - Call US Toll Free
Admicrosoft-os-support.itechline.com/
1 (855) 281 4201
Tech Support for Microsoft Windows.
Live Tech Support - Windows 7 Support - Outlook Support

How to reinstall the mac app store after an accidental removal?

I have a real problem, and I could use anyones help. I am running Mac os x 10.6.8 and was trying to to upgrade to lion, however I was experiencing issues with the mac app store and had to delete, not in the knowledge that I cannot download the combo pack of 10.6.6. Is there anyway to reinstall the mac app store after 10.6.6, current is 10.6.8.
please can someone help me.
most appreciated.

Manually download and install the 10.6.8 Update Combo.
http://support.apple.com/kb/DL1399

Windows Update Error 800B0109 after Windows Update Agent 7.6.7600.320 Installed

Hi, I have this error message when running windows update, it happened after Windows Update Agent 7.6.7600.320 installed.
Any idea how to resolve this?
Thank you.

Hi，
Please make sure that your antivirus application does not scan the files in the
%windir% \SoftwareDistribution directory on any computer on which Windows Update Agent is installed.
You can also temporarily turn off the antivirus application and check the result.
Or run the following commands, and press Enter after each command:
Net stop wuauserv
cd %systemroot%
Ren SoftwareDistribution SoftwareDistribution.old
Net start wuauserv
Try to install updates again.
Yolanda Zhu
TechNet Community Support
I tried the commands as well, still prompting the same error.
Thanks

MRVCR80.dll error when trying to open iTunes

It keeps telling me to reinstall iTunes, I tried to repair, install, etc. and it keeps telling me I have the MRVCR80.dll error. This has never happened...what do I do?

Solving the iTunes Installation Problems in Windows
1. Apple has posted their solution here: iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue.
2. If the Apple article does not fully resolve the problem for you, then try Troubleshooting issues with iTunes for Windows updates - MSVCR80.

How to reinstall PDF Printer in Print & Scan window on OSX 10.8.2

Hello,
I was having issues where PDF's were not saving when I was printing them, so I thought that if I deleted the PDF printer from my list of printers and reinstalled it, my problem would be solved. Now I can't figure out how to reinstall (add) the PDF printer back into this window. I have uninstalled and reinstalled Acrobat, and I have been searching the web for about an hour.
I am running OSX 10.8.2
I have Adobe Creative Cloud installed
I am on an iMac 3.4 Ghz Intel Core i7
32 GB of RAM
Thanks for any help you have.
J

Moving this discussion to the Creating, Editing, & Exporting PDFs forum.

Battery not detected after windows install. Batteries tab missing in device manager too

My eM250 still charges fine but I have no way to see how much juice I have left. no after market meters or anything like that has helped. How can I fix such an odd problem?

iluvwhtchix,
I've looked at the quick start and service guide and do not see a standby button, what am I missing? LoL
It just sounds like there are some drivers that did not install, was this with the media that was sent from eMachines? There might be a drivers disc that could resolve the issues, if so. You can always go check to see if you have the right drivers on our eMachines support page.

How to remove address area in the New window opened using getURL()?

Hello everyone,
I am trying to open a NEW window from Flash and I am using
the following code to do so.
getURL("javascript:window.open('
http://www.MyDomain.com/demo/','Demo',
'width='+((screen.width*3)/4)+', height=' + ((screen.height*3)/4) +
', top=' + ((screen.height*1)/16) + ',
left='+((screen.width*1)/16)+' , fullscreen, toolbar=no,
scrollbars=yes, resizable=yes, menubar=no, status=no,
directories=no, location=no'), void(0)");
This line of code opens a NEW window but I still have web
address area available in the new window. Can someone be kind
enough to tell me how I can remove the web address area on the top
of the window?
Thank you very much and have a great day.

Thanks for answering Frank, goLink may be linked to a method of backbean?
That what we need is to generate jobId through a method and immediately after deployment of the report on another page.
Already tried to goLink component but unfortunately does not have the property to execute a method Action.

Apps open in a new window/space.. how do I turn this off so all windows open in "desktop"?

Whenever I open an app it creates a new space to open the app in. All apps do this, and you can see the windows/spaces by hitting F3; the icons are lined up at the top of the screen. How do I disable this feature so all windows and apps open in the "desktop" space?

OS X Yosemite: Work in multiple spaces

How to reinstall APISupport.dll error detected after windows open

Similar Messages

Maybe you are looking for