How to reinstall audio drivers on Mac OSX 10.5.8?

On Mac OSX 10.5.8 i have a problem with not working sound. It does work on turning on my Mac, but it does not work in system. When I put F11-F12 it's grey and permamently mute. I ve tried everything, but nothing helps...
From options, which should I choose:
1. Install Linux on another disc?
2. Come back from 10.5.8 to 10.5.7 (sound works)? - and how to do it?
3. something else? no other ideas...
Mac has been bought at polish Allegro (something like e-bay) without CD with system, so I cannot reinstall system totally...

Sorry, it's for 64 bit IntelMacs only...
updating Java SE 6 to 1.6.0_26 for 64-bit capable Intel-based Macs.
Java for Mac OS X 10.5 Update 10

Similar Messages

How to reinstall Audio Drivers

I disabled by mistake an audio driver on my Pavilion dv6 laptop and I don't remember the name of it or know how to reinstall it. Anyone have advice on where I can go to do that?

you can check device manager to see if the driver is disabled.
you can get another copy of your audio driver by visiting hp.com and put your p/n number in the hp search bar in the upper right, selecting software and driver downloads, selecting your operating system and then the applicable driver.
I can give you direct links for your needs if you post your P/N number, or full model of your unit.
Signature:
I currently work on behalf of HP for numerous support departments. The opinions expressed above are the personal opinions of myself, not of HP. There is no guarantee that the opinions expressed are 100% correct.

How do you know what version Mac OSX is on ANOTHER drive?

How do you know what version Mac OSX is on ANOTHER drive without starting that drive
and seeing the system profiler? In fact, because the drive wont start up, Now I am wondering if it is pre-intel. ? CMD-I doesn't do it. Thanks

Why mess with this? Well, I got the HDDs and the enclosure from my previous PPC, so I'd like to make use of it all without $pending again.
I don't see any problems with using the card and drives on your new Mac. Hardware is too pricey to just leave behind if you can't help it. With the new drivers I suspect you'll be able to use your drives, I just don't think you'll be able to boot from them if the interface card requires drivers. They should still be very fast storage devices, and probably reliable due to the ongoing support the vendor has provided.
I went through the same type of issue when I bought my Dual G4 1.42 Tower (upgraded from a Quadra 840AV ). Several of my devices were SCSI (I was into SCSI Wide/Fast drive arrays at the time for video capture), and I was able to use an Adaptec card for scanning for several years with Jaguar and Panther. I'd spent quite a bit of cash to ensure high quality and performance and didn't want to loose all of the investment. Eventually the SATA hard drives and other USB and Firewire replacements became so cheap and performance improved enough that loosing SCSI with Tiger was not a big deal. I do think I should get about 5 years of hardware compatibility with most products and I keep older Mac's around for dedicated services as long as they aren't a costly maintenance issue.

How Do I Get Java For Mac OSX 10.5.8 On A PowerBook G4 Or Update To Minimum MAC OSX 10.6.8 or later Without Spending Any Tech Mind Of My Own And Also Not Buy ANYTHING AT ALL!!!?????

How Do I Get Java For Mac OSX 10.5.8 On A PowerBook G4 Or Update To Minimum MAC OSX 10.6.8 or later Without Spending Any Tech Mind Of My Own And Also Not Buy ANYTHING AT ALL!!!????? Please Help!!!

Sorry, it's for 64 bit IntelMacs only...
updating Java SE 6 to 1.6.0_26 for 64-bit capable Intel-based Macs.
Java for Mac OS X 10.5 Update 10

How to reinstall applications purchased in mac app store

how to reinstall applications purchased in mac app store

Sign into your MAS account and go to the Purchased tab in the MAS. If the app is not installed on this particular Mac then there should be an Install button available for said app.

How to open url photoshop on mac OSX ?

How to open url photoshop on mac OSX ?
Safari doesn't know internet adress starting by "aam://" please help me...

http://helpx.adobe.com/creative-cloud/kb/cc-download-button-gives-aam.html

Wireless usb adapter EW-7711UAn, drivers for Mac OSX 10.9 (Mavericks)

Hi,
I have recently got a wifi usb adapter (above indicated) as my airport card is not working anymore and I needed a quick cheap option... After hours and hours trying to make the new device work, it seems the problem is the version of the drivers (there´s not drivers for Mac OSX 10.9) or that´s what I think. Does anyone know something about it? In the meantime I am waiting for an answer from MediaTek (the owner)... I´ll let you know if as soon as I get a reply what happens
cheers!

this adapter is using the chip RT2870 of Ralink. You can download its driver for OSX 10.9 frome Ralink website.
http://www.mediatek.com/_en/07_downloads/01_windows.php?sn=502

Need help reinstalling elements 10 to mac osx 10.5.8

I have a mac osx 10.5.8 I had elements 10 on it never used it. going to class for it, now trying to use it and it is frozen and says there is an error in program. I uninstalled it and tried to reinstall it and it is unrecognizable. help. ??????

How did you uninstall it?

How do I re-install my Mac OSX Server from scratch

Hi,
I have purchased two MacMini Servers with 10.6 OSX Server software pre-installed.
I have changed the organization as our company name changed and run into license issues.
I want to re-install the Mac OSX Server software and start from scratch. How do I go about this. I tried yesterday for many hours to do so and the new installs are still running into duplicate license issues and other issues. What is the best approach to do re-install? I am willing to erase the internal Hard Disk and boot (with an external DVD optical drive) if that is the best way to go. What are the steps?
I have the original CDs or DVDs and have extra, external hard disks to do a Time Machine backup, etc.
Thanks,
Don

If you are looking to do a nuke and pave of the system, and you have an external optical drive, then yes, that is likely the most direct method. Connect the optical drive, insert the installation DVD, and reboot the system targeting the optical disk as the boot volume (you can do this by holding down the C key or the Option key during startup).
Now, if you do not have an optical drive, you can put the installation disk into another Mac running 10.6 and use the Remote Install Mac OS X application in your Utilities folder.
Hope this helps

How to reinstall Microsoft Office for Mac after new hard drive?

Recently I had a problem with my Macbook Pro, and unfortunately had to purchase a new hard drive and have it installed. This also led to the loss of data and other things, such as Microsoft Office for Mac. I know this is an Apple community, but I get better answers here than at the Microsoft communities so I'm hoping someone can help find out how to reinstall Microsoft Office 2013. I logged onto my Microsft account and it says that there is no record of me purchasing Microsoft Office on that account but I know thats the account that it was purchased on, so i cannot get my product key to reinstall it as directed. Someone please help!!!!

Try calling MS support and explaining the situation, maybe they will issue a new key.
1 (800) 642-7676 (Consumer)
Microsoft Corporation, Customer service
24/7 Microsoft Support - Microsoft.MyPhoneSupport.com
Admicrosoft.myphonesupport.com/
1 (855) 698 3249
Phone Our Tech Support Experts 24/7 For Microsoft Support. Call Now...
Support for Microsoft? - Call Toll Free Now
Adwww.supportdeskwiz.com/Microsoft
1 (855) 760 8099
24x7 Tech Support for Microsoft by SDW.
Microsoft Windows Support - Call US Toll Free
Admicrosoft-os-support.itechline.com/
1 (855) 281 4201
Tech Support for Microsoft Windows.
Live Tech Support - Windows 7 Support - Outlook Support

Reinstall Flash CS3 for Mac OSX

Recently had to replace the hard drive on my Mac Book Pro. Data transfer to the new hard drive went well EXCEPT for my attempts to reinstall Flash CS3 and Flash Player (I'm forgetting the name of the latest and greatest version of the media player--forgive my temporary ignorance). I followed all of the procedures outlined in the ReadMe file. Have tried it several times to no avail. I keep getting an error message at the end of the reinstall process and the program will not open. All of the application files appear to be on my hard rive. Something is missing or needs to be repaired. I just don't know where to start to find out what needs to be repaired or replaced or updated. I suspect that because there have been numerous updates to Flash player, something related is interfering with the reinstall process. Any advice help would be appreciated.
Cheers.

Mike, thank you very much for your help. Luckily I have found the
right Flash version: 10.1.102.64
Am 05.02.2014 um 20:55 schrieb Mike M:
Re: flash player for MAC OSX 10.5.8
created by Mike M in Installing Flash Player - View the full
discussion
Flash Player 10.3.183.90
>
That's a zip file containing BOTH Windows and Mac versions.
You'll find a debug folder and a 10.3.183.90 folder. It's in the
latter. It'll be a DMG named 10_3_183_90.dmg.
>
Is your Mac Intel or PowerPC?
Please note that the Adobe Forums do not accept email attachments.
If you want to embed a screen image in your message please visit the
thread in the forum to embed the image at http://forums.adobe.com/message/6089591#6089591
Replies to this message go to everyone subscribed to this thread,
not directly to the person who posted the message. To post a reply,
either reply to this email or visit the message page: [http://forums.adobe.com/message/6089591#6089591
To unsubscribe from this thread, please visit the message page at [http://forums.adobe.com/message/6089591#6089591
]. In the Actions box on the right, click the Stop Email
Notifications link.
Start a new discussion in Installing Flash Player at Adobe Community
For more information about maintaining your forum email
notifications please go to http://forums.adobe.com/thread/416458?tstart=0

How to install oldest version of mac osx

guys i need to install oldest version of mac osx
im using 10.6.3 but i need to install back to 10.5.8
please help me out

How to instal oldest mac osx wrote:
15 inc
2.8 ghz
4 g ram i've got and also originally i've got mac osx 10.6 dvd.
but i need to install 10.5.8
coz my connectiv box driver approve only 10.5.8
According to Mactracker, given the size of the screen and the CPU speed your MBP could be one of these models:
- MacBookPro5,1, which originally shipped with OS X 10.5.5
- MacBookPro5,3, which originally shipped with OS X 10.5.7
Since they originally shipped with OS X 10.5, the system disc that came with your MBP may have 10.5 on it. If so, you should be able to do a reinstall from the original disc. If you do a full backup to another volume before you do that, you can recover your data from the backup to your MBP. However, some migrating some of the data (such as Mail messages) may be tricky due to format changes.

How to run .rdp file in Mac OSX?

I have installed Microsoft Remote Desktop 8.0.5 For MAC OSX 10.8.5 and added new remote connection in the list which works fine.
Now i export same connection to .rdp file but when i execute it mstsc opens remote os login screen for user password to login (which is already in keychain store).
Question:
how can i launch .rdp file so that it will not ask remote user password?
where/how to store password?
------- .RDP File ----------
screen mode id:i:0
use multimon:i:1
session bpp:i:32
full address:s:192.168.1.130
audiomode:i:0
username:s:mylabs\administrator
disable wallpaper:i:0
disable full window drag:i:0
disable menu anims:i:0
disable themes:i:0
alternate shell:s:
shell working directory:s:
authentication level:i:0
connect to console:i:0
gatewayusagemethod:i:0
disable cursor setting:i:0
allow font smoothing:i:1
allow desktop com
bookmarktype:i:3
use redirection server name:i:0
Thanks in advance

Hi Mandar,
Thank you for your posting in Windows Server Forum.
“create a simple shell script to launch my remote desktop connection. Eg: if I want to launch SteiniServer.rdp, then my script would look like this:
open "/Applications/Remote Desktop Connection.app" ~/Documents/RDC/SteiniServer.rdp”
(Quoted from below article).
Please go through below article might helpful in your case.
Quickly Launch Remote Desktop Connections on Mac OS X
Hope it helps!
Thanks.
Dharmesh Solanki

How can I delete LogMein from mac osx

How can I deltee LogMein from my Mac OSX computer?

The link above is no longer appropriate!
If you are running a current version of Logmein i.e. 2013/2014 you need to do the following:-
1. Open the Logmein control panel
2. Click About
3. Click Unistall button.
Thank you--this was just what I needed to uninstall LogMeIn from OS X 10.9.2. I only wish there were a way of making your solution more prominent.
David

HT1338 how can i up grade my mac osx 10.5.8 to mountain lion?

how do i upgrade my mac osx 10.5.8 leopard to mountain lion

Snow Leopard/10.6.x Requirements...
General requirements
   * Mac computer with an Intel processor
    * 1GB of memory (I say 4GB at least, more if you can afford it)
    * 5GB of available disk space (I say 30GB at least)
    * DVD drive for installation
    * Some features require a compatible Internet service provider; fees may apply.
    * Some features require Apple’s MobileMe service; fees and terms apply.
Which apps work with Mac OS X 10.6?...
http://snowleopard.wikidot.com/
It's been pulled from the online store, so you have to call Apple to buy it.

How to reinstall audio drivers on Mac OSX 10.5.8?

Similar Messages

Maybe you are looking for