How to reinstall CRS after database has been creaed.

Hi gurus
I need to reinstall the CRS because I used wrong IP alias when privious installation.The database has been created and put into the test enviroment. I am required to reinstall the CRS without affecting the database normal running.
How to achive this. A step by step procedure is preferable or just a link is OK.
Thanks for your time?

Do you need to change a hostname or an IP address ?
What hostname or IP address do you need to change ?
VIP ? Public address ? Interconnect ?
Following discussion may help:
Re: Need to change IP address and host name on a ORACLE 10g RAC setup.
Edited by: P. Forstmann on 2 avr. 2010 09:11
Edited by: P. Forstmann on 2 avr. 2010 09:17

Similar Messages

How to delete icloud after it has been reset to factory settings.

My grandmother had recently given me her iPhone because I had no phone. She switched to android. Note: she has no idea what her password email is to the iTunes account.(She has Alzheimer's) Fancy that. The iPhone 4 is backed up to icloud. I looked on the internet and restored it to factory settings through iTunes on my computer thinking it could work and delte her info. The phone is still linked to her account. I am unable to setup up the phone because of that. note: I am at the "Hello, welcome to your new iPhone" screen. Any help?

Does the email address give you any idea of what her Apple ID might have been? As ManSinha indicated, if you can retrieve her Apple ID via the FORGOT APPLE ID site, then you might have a shot at getting the password reset so you can log her off of Find My iPhone.
What you are seeing here is the Activation Lock:
ACTIVATION LOCK
To remove the Activation Lock, one of the following sets of actions must be completed:
Find My iPhone Activation Lock: Removing a device from a previous owner’s account - Apple Support
Best of luck,
GB

How to forbid any further changes for PO (QTY and price ) after it has been

Hi,
How to forbid any further changes for PO (QTY and price ) after it has been done GR and LIV? Thanks.

Hi,
Price anyway cannot be changed once GR is posted on the PO item, it can be changed only by cancelling the GR, the same applies to IR too.
But quantity can be changed at any time.
So if you are looking at blocking qty too, then a customized message through save exit is the option, I am not aware of any standard SAP messages that can be configured to achieve this..
Ramesh

How do i get back my stateful session bean after it has been passivated

hi ,
How do i get back my stateful session bean after it has been passivated by container.
i'm confused that is it possible or not .......give me answer
i've one stateful sessionbean which i'm accessing throgh my normal java client . now what i'm doing is when i first time call a method it is running ......then i'm shutting down the server jboss .......it is calling my ejbPassivate() method ... at this particular time client program doesn't do anything.....
now after i restart my server i'm again calling back that business method with that last object reference.......it gives me the exception given below.....
java.rmi.NoSuchObjectException: no such object in table
java.rmi.NoSuchObjectException: no such object in table
     at sun.rmi.transport.StreamRemoteCall.exceptionReceivedFromServer(Unknown Source)
     at sun.rmi.transport.StreamRemoteCall.executeCall(Unknown Source)
     at sun.rmi.server.UnicastRef.invoke(Unknown Source)
     at org.jboss.invocation.jrmp.server.JRMPInvoker_Stub.invoke(Unknown Source)
     at org.jboss.invocation.jrmp.interfaces.JRMPInvokerProxy.invoke(JRMPInvokerProxy.java:118)
     at org.jboss.invocation.InvokerInterceptor.invokeInvoker(InvokerInterceptor.java:227)
     at org.jboss.invocation.InvokerInterceptor.invoke(InvokerInterceptor.java:167)
     at org.jboss.proxy.TransactionInterceptor.invoke(TransactionInterceptor.java:46)
     at org.jboss.proxy.SecurityInterceptor.invoke(SecurityInterceptor.java:55)
     at org.jboss.proxy.ejb.StatefulSessionInterceptor.invoke(StatefulSessionInterceptor.java:106)
     at org.jboss.proxy.ClientContainer.invoke(ClientContainer.java:86)
     at $Proxy1.makeNewAcc(Unknown Source)
     at client.GanJavaClient.main(GanJavaClient.java:46)so pls tell me that is it possible to get back that session besn or not

Stateful session beans are not persisted across restart of the EJB server instance(s) hosting them. You can't treat a Session bean as one would an entity bean.
Chuck

How to settle the expenses after AUC has been capitalised.

Hi All,
I have a understanding that after AUC has been settled, we can edit the settlement rule in WBS element and settle directly to the capitalised assets.
I can not see the settlement rule but investment profile since the project being a Capital comes from Investment measure and automatically created.
Can you tell me how to create a new settlement rule in this case. It is Urgent
Regards
VK

Hi Vijay,
This requires a change in the settlement rule since the AUC is no more and it must be the settlement reveiver earlier which should be changed to the main asset after capitalisation.
Please go to Transaction code CJ20N, select the WBS and go to settlement rule via edit > Cost and set the receiver as the fixed assets itself instead of AUCV since AUC has been transferred to main assets.
You can then settle using CJ8G or CJ88 but CJ88 is a better option.
I think, I have answered the same query.
Regards
Bharat

How to know if a file has been updated in iCloud after modification?

How to know if a file has been updated in iCloud after modification?
I work on various app including Keynote on my Mac Pro. And after modification, i close file and I wait.
When I see no more Internet traffic. I assume that keynote has uploaded all the works I have done into iCloud.
But when I open the same file on my iPad on the way to work. I do not see the file updated.
I assume that I did not wait long enough.
I wished I had a way to enforce the updated file to upload and way to get confirmation that it has been completed.
In windows I simply push the sync button.
But for iCloud I do not yet see anything like that.
Please help.

you would be better served asking this in the iCloud discussion, where users are more knowledgeable about iCloud. Replies on iOS and iCloud issues are usually unanswered here because of our lack of knowledge.

How to enable my Ipad after it has been dissable by too many wrong attempts to enter passcode?

How to enable my Ipad after it has been dissable by too many wrong attempts to enter passcode?

You have to restore the iPad in order to unlock it using these instructions.
http://support.apple.com/kb/HT1212?viewlocale=en_US&locale=en_US

HT1212 how to enable my iphone after it has been disenabled?

How to enable my iphone after it has been disabled?

You have to restore the iPad in order to unlock it using these instructions.
http://support.apple.com/kb/HT1212?viewlocale=en_US&locale=en_US

After password has been reset how do I reset keychain?

After password has been reset how do I reset keychain?

That article is a great help if you remember your OLD login password.
If not, the bad news is in this article:
OS X: Keychain Access asks for keychain "login" after changing login password
read it carefully, It explains how to change your keychain by using the OLD password.
If you don't remember your original (former) account password
If you don't remember your original password, you'll need to delete the keychain. Deleting a keychain also deletes all the password data saved in that keychain.
If this applies, it means is that your old saved passwords are lost.
You will have to start collecting them anew and adding them to the new keychain. Use Web mail and log in to your email with a Browser. Get them to send you your old password or reset it, then record the new one in Mail Preferences, and it will be saved in the current login keychain.
You will have to do a similar exercise with your other saved passwords.

How to add DNS server to CER after Server has been Built

How to add DNS server to CER after Server has been Built?
The reason why, the CER 1.3.1 that I upgrade to 7.1, had the switch list by hostname,
The install of 1.3.1 had the LMHOST file editted with all the switch names.
Is there such thing as a host file on 7.1 CER? If not, that is where I need to add the DNS server now. As they will have to add the switch hostnames to the DNS server.
Thanks
Kallol

I found where to set the DNS via CLI...
admin:set network dns
      set network dns options
      set network dns primary
      set network dns secondary
Also it requires me to configure the domain name.
set network domain name

HT201274 how to erase iphone 4s after service has been terminated

how to erase iPhone 4s content after service has been terminated

Man I don't know what else you can do.
you can log into icloud.com, but you can't erase the phone, because you aren't connected to wifi or cellular data.

HT1438 how can you unlock an iphone 4 after is has been disabled?

how can you unlock an iphone 4 after is has been disabled?

Once the Device is asking to be Restored with iTunes... it is too late to save anything... and you must continue with the Recovery...
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps...
After you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766

SQLException: After clearParameters() has been called, all parameters must be reset before executing

Hi,
I am running: Weblogic 6.1, SP2
Driver : weblogic.jdbc.oci.Driver
Reason for not using the "thin" driver, which works, is limit
on size of Clob
Previous references to this problem in this newsgroup indicate driver problems
with older versions of WL.. I am using the latest..
The SQLException I get is "After clearParameters() has been called, all parameters
must be reset before executing". This happens the second time the code below is
excuted ( ok the first time )
"clearParameters()" is never called explicitly in my code.
The exception occurs on the "spFunc.execute();" statement at the very end of this
code:
// OBS:connection, conn_, is opened from a connection pool
before this code is called and cloesed afterwards.
conn_.setAutoCommit(false);
// ============== Initializing clob ==================
SerialStatement stmt = (SerialStatement)conn_.createStatement();
stmt.execute("INSERT INTO lc_clob_temp VALUES (1, EMPTY_CLOB())");
// OBS: using a prepared statement here will result in SerialClob
// exception when using setClob in the prepared statement
below
// This is probably a bug ( worked in WL 5.1 ). We had this
as a support case 270952 with WebLogic.
stmt.execute("SELECT * FROM lc_clob_temp WHERE id = 1");
ResultSet crs = stmt.getResultSet();
weblogic.jdbc.rmi.SerialClob xmlClob = null;
while ( crs.next() ) {
xmlClob=(weblogic.jdbc.rmi.SerialClob)crs.getClob("newclob");
// Call Oracle's stored procedure for calling Oracle XSU.
SerialCallableStatement spFunc =
(SerialCallableStatement)conn_.prepareCall(
"declare " +
"insCtx sys.DBMS_XMLSave.ctxType; " +
"begin " +
"insCtx := sys.DBMS_XMLSave.newContext(?); " +
"sys.DBMS_XMLSave.setBatchSize(insCtx,0);" + "sys.DBMS_XMLSave.setCommitBatch(insCtx,
0);" +
"? := sys.DBMS_XMLSave.insertXML(insCtx,?); " +
"sys.DBMS_XMLSave.closeContext(insCtx); " +
"end;"
spFunc.setString(1, viewName );
spFunc.registerOutParameter (2, Types.NUMERIC);
Writer outstream = xmlClob.getCharacterOutputStream();
outstream.write(xml.toString());
outstream.flush();
outstream.close();
spFunc.setClob( 3, xmlClob);
spFunc.execute();
spFunc.close();

Hi,
I am running: Weblogic 6.1, SP2
Driver : weblogic.jdbc.oci.Driver
Reason for not using the "thin" driver, which works, is limit
on size of Clob
Previous references to this problem in this newsgroup indicate driver problems
with older versions of WL.. I am using the latest..
The SQLException I get is "After clearParameters() has been called, all parameters
must be reset before executing". This happens the second time the code below is
excuted ( ok the first time )
"clearParameters()" is never called explicitly in my code.
The exception occurs on the "spFunc.execute();" statement at the very end of this
code:
// OBS:connection, conn_, is opened from a connection pool
before this code is called and cloesed afterwards.
conn_.setAutoCommit(false);
// ============== Initializing clob ==================
SerialStatement stmt = (SerialStatement)conn_.createStatement();
stmt.execute("INSERT INTO lc_clob_temp VALUES (1, EMPTY_CLOB())");
// OBS: using a prepared statement here will result in SerialClob
// exception when using setClob in the prepared statement
below
// This is probably a bug ( worked in WL 5.1 ). We had this
as a support case 270952 with WebLogic.
stmt.execute("SELECT * FROM lc_clob_temp WHERE id = 1");
ResultSet crs = stmt.getResultSet();
weblogic.jdbc.rmi.SerialClob xmlClob = null;
while ( crs.next() ) {
xmlClob=(weblogic.jdbc.rmi.SerialClob)crs.getClob("newclob");
// Call Oracle's stored procedure for calling Oracle XSU.
SerialCallableStatement spFunc =
(SerialCallableStatement)conn_.prepareCall(
"declare " +
"insCtx sys.DBMS_XMLSave.ctxType; " +
"begin " +
"insCtx := sys.DBMS_XMLSave.newContext(?); " +
"sys.DBMS_XMLSave.setBatchSize(insCtx,0);" + "sys.DBMS_XMLSave.setCommitBatch(insCtx,
0);" +
"? := sys.DBMS_XMLSave.insertXML(insCtx,?); " +
"sys.DBMS_XMLSave.closeContext(insCtx); " +
"end;"
spFunc.setString(1, viewName );
spFunc.registerOutParameter (2, Types.NUMERIC);
Writer outstream = xmlClob.getCharacterOutputStream();
outstream.write(xml.toString());
outstream.flush();
outstream.close();
spFunc.setClob( 3, xmlClob);
spFunc.execute();
spFunc.close();

My computer does not eject the disc after it has been burned.

I understand that my computer is supposed to automatically eject a disc after it has been burned. Mine doesn't. Instead, I hear a "Plonk," which I assume is announcing that the burning process has been completed.
First of all, is it true that the disc is supposed to be ejected after the burn has been completed? Secondly, how can I restore that function?

Diane Wordsmith wrote:
To clarify...are you importing songs from a CD into iTunes, or are you burning songs from iTunes onto a blank CD? If it's the former, iTunes won't eject it...you'll just hear a chime or noise when it's done. If it's the latter it should eject.
For the second poster, it sounds you are importing. In which case, you will just hear the sound when importing is finished and you eject the CD yourself.
Just to make sure that I understand you correctly, here's what I did: Imported songs from website. They were in RealPlayer format. I then converted the song files into MP3 format, and put them into my iTunes music library. Finally, I put the songs in a New Smart Playlist, and burned them into a blank disc.
Given this situation, should I expect the disc to automatically eject when the burning is competed? If so, what do I have to do to get it to work properly?

HT5129 How do I turn off MobileMe has been discontinued warning off. I did not keep photo under gallery so there is no need to migrate.

How do I turn off "MobileMe has been discontinued" warning off. I did not keep photo under gallery so there is no need to migrate. The warning keep on showing up after initial round.

In the iPhoto preferences delete all references to MM and do likewise in the system preferences
LN

How to reinstall CRS after database has been creaed.

Similar Messages

Maybe you are looking for