How to reinstall CS3 after uninstalling suite and getting error messages?
I have been using CS3 for a few years, and just a couple of weeks ago the InDesign program was having troubles, so I uninstalled the programs, and tried to reinstall from disc, but there are error messages and will not reinstall. I cleaned up all Adobe files off my system using Windows 7. Any tips to reinstall CS3?
Paul
Run the cleaner tool (CS Cleaner Tool for installation problems | CCM, CS6, CS5.5, CS5, CS4, CS3) to be sure CS3 is really gone, then run MSconfig and turn off all the unnecessary startup programs and services, especially ant-virus and malware scanners, instant messengers, browser helpers and toolbars (but leave Bonjour running if it's in the list) and reboot. If you see a message about running in diagnostic mode on reboot, cancel MSconfig, then run the installer (and using the normnally disabled Administrator account won't hurt, either). After installation you can run MSconfig again and return to normal startup.
Similar Messages
-
I have a photosmart C7280 printer. Powers itself on after powering off and gets error message/blink
Photosmart C7200 powers itself on after powering off. I get an error message and lights are blinking. To clear I have to unplug.
This question was solved.
View Solution.What is the error message? What lights are blinking? The troublshhooting page here may help.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V -
great Problemes after installing Yosemite (10.10.2 ) with Photoshop CS6....The program crashes --last time 10 times during my work session..wacomtable doesnt work..it is slow...and get error messages about the graphic card....It s a Terror to work with my beloved Photoshop!
The Yosemite upgrade very often damages existing Photoshop installations. Thank Apple for that.
You need to uninstall and re-install Photoshop, then apply all the Photoshop upgrades from scratch.
But first, give us details about your setup:
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
A screen shot of your settings or of the image could be very helpful too,
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks! -
How to reinstall Elements 11 when you always get the message: error sharedtechnolgies failed.
I wanted editing a photo from lightroom to elements but lightroom did not open elements. Your site said first to reinstall Elements before to try more comlicated things. It is the worst thing I ever done. Now i have lost Elements at all. It does not want to reinstall. Very funny. I tried all Adobe (!!!) suggestions: change OOBE for OOBE.bak; copy file from the dvd to computer before autorun executable,etc etc NOTHING WORKS !
Adobe suggested to download ASA program but only to tell us that it does more exist !!! After that they suggested to try to find MANUALLY the dailies failure reports !!! It is impossible to understand those reports
Thank for your help!!HI,
Win7-64, Lightroom 4.4 Photoshop Elements 11 GPU Nvidia Quadro K600, 4g RAM, Dell U2713H , all servicepack updated.
After several hours searching on the web Finally found that in c\programfiles(x86)\commonfiles\adobe\OOBE
Rename in OLDOOBE
Stop antivirus
Restart windows
Copy directory of the DVD Adobe PSE 11 to c\ ord\:nameit ADOBE\
Open file
Click right to setup.exe
Buzinga.
It is the worst software I ever had to deal whit.
FargateOne
De : Mylenium
Envoyé : 7 mai 2014 10:26
À : Pascal Renauld
Objet : How to reinstall Elements 11 when you always get the message: error sharedtechnolgies failed.
How to reinstall Elements 11 when you always get the message: error sharedtechnolgies failed.
created by Mylenium <https://forums.adobe.com/people/Mylenium> in Photoshop General Discussion - View the full discussion <https://forums.adobe.com/message/6361905#6361905> -
Prompted to upgrade iTunes on computer. Won't let me and get error message MSVVR80.dll not found. Attempted to reinstall, won't let me. Can you have iTunes and iCloud on the same computer?
Try following the instructions of tt2 in https://discussions.apple.com/thread/5822086
-
Updating iTunes 12.1 and get error message "The procedure entry point CMBlockBufferCopyDataBytes could not be located in the dynamic link library CoreMedia.dll". What went wrong and how to resolve this?
Entry point errors can often be fixed by deleting the offending dll, then repairing the component it is part of.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If the advice above doesn't resolve things you could try this alternate version:
iTunes 12.1.0.71 for Windows (64-bit - for older video cards) - itunes64setup.exe (2015-01-28)
which is a 64-bit installer for the 32-bit version of the core application, similar to previous 64-bit releases.
Or roll back to the previous build:
iTunes 12.0.1.26 for Windows (32-bit) - iTunesSetup.exe (2014-10-16)
iTunes 12.0.1.26 for Windows (64-bit) - iTunes64Setup.exe (2014-10-16)
tt2 -
I purchased the TV FRIENDS in HD on iTunes (the iTunes store stated with every HD purchase you get the SD version as well) and want to download on my I Pod Classic and get error message the I POD can not play this video. How do I download?
I see there's no answer.
This issue has ****** me off for a long time, and I am fed the **** up with it.
I DO NOT WANT TO DOWNLOAD the Movies and TV shows to every *^&%^$%# Apple device, ONLY the MUSIC!!!
COme on Apple!!! FIx this!!! -
my ipad will not come on. i tried to restore and get error message 1603, dont know how to take out itsw which it tells me to do.
Error 1603
Follow the steps listed below for Error 1604. Also, discard the .ipsw file, open iTunes and attempt to download the update again. See the steps under Advanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations. If you do not want to remove the IPSW in the original user, try restoring in a new administrator user. If the issue remains, Eliminate third-party security software conflicts.
Error 1604
This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode, put it into Recovery Mode.
Restore and wait for the error.
When prompted, click OK.
Close and reopen iTunes while the device remains connected.
The device should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
The above is from the 2nd link below.
Update and restore alert messages on iPhone, iPad, and iPod touch
http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
Cheers, Tom -
Itunes was working fine. Tried to install latest upgrade and get error message about an invalid character in the path "Program Files (x86)". PC, Win7, nothing else appears to be having same issue. Program still works, simply cannor upgrade.
Thanks b noir,
I tried this solution without success. After FixIt ran and didn't find a problem, either in looking for issues with "software upgrade" or "iTunes" it kindly offered to help me uninstall iTunes. I had thought of this as a possibilty but it seems to me that if you do that you lose a lot of "non-native-to-Apple" information you might have entered. I did this once and recovery was painfull. Is there a way to uninstall iTunes without losing all of that sort of thing? Any help would be appreciated. -
I am running windows xp. Trying to download latest version of iTunes and get error message: Microsoft Visual C Rundtime Library. Runtime Error. Program:C\ProgramFiles\iTunes\iTunes.exe. R6034 An appliction has made an attempt to load the C runtime library incorrectly. Please contact the appliction's support team for more information.
2nd/ message: iTunes was not installed correctly. Please reinstall iTunes. Error 7(Windows error 1114)
I have removed iTunes serveral time and tried to reinstall many times and get the same results noted above.
Can anyone help me? Thank you. EFS1Hello DrJMDDC,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/ht1923
1. Remove iTunes and related components from the Control Panel
2. Verify iTunes and related components are completely uninstalled
3. Reinstall iTunes and related components
Best of luck,
Mario -
trying to update apps on iphone and getting error message, there is not enough available local storage to download these items. you can manage your local device storage usage in settings. What am I to do?
The storage you purchased is in the cloud, and doesn't do anything with your pad. Your problem is simply that you have too much content on your pad. Go to settings, general, usage, and it will show you how much space you have avaliable on your pad. If you let the screen sit for a while, all the apps will be displayed, and you can see how much stuff you have associated with each.
You have to no option but to delete some of the content on your pad. Videos, comics, pitcures and some music files use a lot of space. The cloud allows you to leave stuff there, so you can get it when you need it. -
Macbook pro two days old...bought logic from app store...logic has installed partly each time i open it up it wants to download rest of programme then stops half way thru and gets error message 'logic is unable to continue with download' help needed !
Hello:
I would trot back into the Apple store and have them fix the problem (or call Applecare with a warranty issue). There is no sense in you wasting your time trying to troubleshoot things on a new computer.
Barry -
I keep losing entire catalogs. I put in 30,000 images and cannot get to them. Put in 3,000 images and get error message "Light room encountered error when reading its previous cash and needs to quit. light room will fix this problem the next time it loads.'
I have loaded light room several times and even exited computer for 8 hours. Still get error messageA search of this forum shows lots of threads where this issue of "error reading cache" is solved
-
Trying to download Photoshop CS3 for Mac but keep getting error message (HTTP ERROR: 404 /support/downloads/dlm/main.jsp, RequestURI=/support/downloads/dlm/main.jsp)
Jessicawaters are you trying to download from Download CS3 products? If so then please try a different web browser.
-
Trying to install windows 7 and getting error message Windows must be installed to a partition formatted as NTFS
Welcome to Apple Support Communities
Boot Camp Assistant creates a Windows partition in FAT32 to make the Windows XP installation easier.
The problem is that Windows Vista, 7 and 8 require a NTFS partition, so the Windows installer gives this error. The only thing you have to do is to choose the BOOTCAMP partition in the installer and go to “Drive options (advanced)” > Format. Finally, install it
Maybe you are looking for
-
On how many computers can you use a volume license?
Our organization purchased AOO (Adobe Open Options) volume licensing and asked for 6 Mac licenses. We were given 2 licenses for Mac and 2 licenses for Windows. Does anyone here know if the licenses are interchangeable for Mac and Windows? Do you know
-
Newest Safari for Yosemite? I have 8.0.4 but it doesn't work
Safari very flakey. Locks up, can't access app store at all, have tried from Firefox. Want to reinstall safari but unable to access.
-
Upgrade 4.6c to ERP2005 Tables - V_BRG and V_DDAT
Hello Guru's, We are currently upgrading from 4.6C to ERP2005 (ECC 6.0) we are in the early stages of development testing and it appears that tables V_BRG and V_DDAT do not exist in the new development client. I am getting the messages ' no database
-
Where do I find the .plist file for finder in Lion?
When I open a new finder window, it doesn't have anything in it. If I change the preferences to another place, I get the contents. If I change them back to the desktop, I get nothing. Searching for something gets me items, but I would like my finder
-
Just got first mac, i've lost the pages icon already!
I am sure the icon was there orginally, but now after migrating folders with word docs excel etc across from my PC, the icon has gone and is replaced by the folders with the doc's in, but how do i now open new word doc or excel doc etc, anybody help