How to reinstall data from hp backup discs

System crashed. Can't seem to figure out how to reinstall data from backup discs.

Greetings,
If you place the first disc into your DVD-ROM and start your computer, on the HP screen press Escape until you get a menu. Select the Boot menu, choose CD/DVD-ROM, and then enter. Press any key when it tells you to press any key to boot off CD-ROM. This will load the recovery software.
*****WARNING***** you will lose all files and programs that you have installed and placed on your computer since you purchased the unit.
. Once this has been completed, you will see a HP Recovery screen. Select System Recovery, then select next and follow the prompts. There should be a section allowing you to backup your data onto a flash drive. Now I recommend if there is any critical data on your disk that you verify the backup prior to initiating the actual recovery.
This will set your computer up as the day that you first purchased it. All data and programs installed on the computer since the day you purchased it will be gone.
During this process make sure you are on your AC adapter and you have no extra devices plugged in such as printers, external hard disks, and flash drives while the actual recovery is taking place. You can use your flash drive during the backup process portion.
Good Luck
Brent
***** Please select issue confirmed on the post of the person whom recommended the solution that fixed your issue. This way future board members can quickly access the solution****

Similar Messages

How to retrive data from encrypted backup(failed in itunes) - i have the password!!

I know there are other software that may help to retrive the data but it doesn't work with encrypted backup.
Now i have the password, i have the encrypted backup (failed to recover in itunes).
What can i do? is it possible to remove the password from the encrypted backup provided that i have the password????

No, it's not possible.
What happens when trying to restore the backup via iTunes? It is entirely possible that the backup is simply corrupted.

HT201250 I had to replace the hard drive in my old MacBook. I replaced it. Installed OSX10.6. Then using the system software I reinstalled data from my Time Machine backup. On completion it asked for my password. It is not accepted. I am locked out how I

I had to replace the hard drive in my old MacBook. I replaced it. Installed OSX10.6. Then using the system software I reinstalled data from my Time Machine backup. On completion it asked for my password. It is not accepted. I am locked out how I overcome this?
I was already using 10.7. But only had the disc for 10.6.

Sorry I am new to this. Am I in the right area? I am using my iPhone to make contact. I am worried.

How can I restore my data from a backup with different Phone name?

I recently had to restore my iphone which erased all the data. I have a backup of that data in iTunes and I want to restore it to the phone. However when I connected the phone to iTunes the first time after resetting everything, I accidently chose to create a new phone instead of restore settings and data from the backup.
My question is, how can I restore the iPhone from this previous backup? My iPhone is currently called "untitled playlist" and the backup is called "JC's iPhone".
Thanks,
Jeremy
ps. Sorry for posting twice. Nobody responded the first time, probably because I had a poor subject.

Jeremy,
If you restore again, you will be prompted to choose a backup or setup as a new phone again. Then you can just choose your old backup.
Hope this helps,
Jennifer B.

How to restore Data from past iCloud backup? I lost my spreadsheets from Numbers, need help.

How to restore Data from past iCloud backup?
Is there a way where i can retrieve my spreadsheets from the past iCloud backup of numbers?

Your Numbers documents were synced with iCloud so they would be stored on the server rather than being included in the backup. If you were signed into your iCloud account on a Mac that you were backing up with Time Machine, you could restore them from your Time Machine backup.

How does iCloud manage app data like whatsapp ? Does it overwrite the data everytime I backup to I cloud with the data on the phone or it merges the data from previous backups with the new data?

How does iCloud manage app data( like whatsapp) ? Does it overwrite the data everytime I backup to I cloud with the data on the phone when i backup or it merges the data from previous backups with the new data?

You need to subscribe to iTunes Match to store your music on iCloud:
http://www.apple.com/itunes/itunes-match/
To transfer iTunes Store purchases made on your phone to your computer, connect your phone then choose "Transfer purchases..." from the File menu in iTunes.
Photostream transfers photos taken on your iOS devices to other devices and your computer. For troubleshooting Photostream see: http://support.apple.com/kb/TS3989

How can I restore 3rd party app data from my backup in the cloud

First a brief history. I use the iCloud to backup my iPad 2 and hardly ever synch it to itunes on my computer. I got the new iPad and restored the backup of my iPad 2 onto it. All was fine except that an issue I had on my iPad 2's Safari had transferred over to my new iPad. That's is for another discussion. Anyhow I went to the genius bar and they said to just setup my new iPad as a new device and then manually install everything back on it. Stuff like mail, contacts, etc, would be reloaded from the cloud. So I did and I noticed that one of my 3rd party apps, MadPad, had none of my saved data. Does anyone know of a way to restore 3rd party app data from the iCloud? Is there some sort of utility out there that would do this? I don't want to restore it from my previous iPad 2 backup because it will reintroduce the Safari problem back onto my new iPad.
Thanks!

Assuming that you even have a backup with the data in it, you have no choice but to use a backup in order to restore that data. That is the idea behind backing up to iCloud. If that is the only backup that you have - then that is the one that you have to use.
But if the backup is bad - or had corrupt data - then you will end up with the corrupt data again. You cannot selectively restore app data from a backup. you restore all settings and data - or nothing at all.

How to fetch data from different sources into one source (like into Ztable)

hi friends,
As per our client requirements they want to develope an Inventory and an Ontime delivery report in BO on top of Oracle database.
Situation is some thing like they have ECC 6.0.and they want to collect all inventory and ontime delivery data at one place.According to me that could be one Ztable in which we can gather all data.Apart from that they are going to use Data Integrator in which they can directly fetch the data from R/3 system(They dont want to have BI system) and put all data in Oracle DB.On top of ORacle BO person can develop BO reports.
My question is how to fetch all data at one place and what are the tables going to be use.
kindly help me out as its very important project.
Thanks
Abhishek

The following is my standard reply to those who need to get old data from a backup in one account and add it to another account. The method described here may be applied to your case. It would be a bit of a long process, though.
When connected to the account you want to GET data from, Go to Settings>iCloud and turn all data that is syncing with iCloud (contacts, calendars, etc.) to Off.
When prompted choose to keep the data on the iPhone.
After everything is turned off, scroll to the bottom and tap Delete Account. Next, set up a new iCloud account using a different Apple ID and turn iCloud data syncing for contacts, etc. back to On. When prompted, choose Merge. This will upload the data to this new account.
Note that this only affects the "Apple data" like contacts, calendars, reminders, etc. Many third party apps also use iCloud to store data files there. These files may be lost in the process, unless the apps also keep the data locally on the device.
NOTE: Photos in the photo stream (if you use it) will not transfer to the new account. It is advised that you save the photos to a computer before performing the account switch.

Is it possible to recover my data from iCloud backup without working wifi? I have as many other upgraded my iPhone 4S to iOS 7.0.2 with the result that the Wi-Fi or Bluetooth no longer works. However, i can connect to iTunes via cable but there is wrong v

Is it possible to recover my data from iCloud backup without working wifi? I have as many other upgraded my iPhone 4S to iOS 7.0.2 with the result that the Wi-Fi or Bluetooth no longer works. However, i can connect to iTunes via cable but there is wrong version of backup.

Answer is no.
If you want the iCloud backup you have to have n internet connection, thus WiFi.
The not working WiFi has happened with quite a number of users.
It is not exactly clear what is the cause but there are suggestions to clear it up:
Some people have had success by removing an apostrophe from the iPhone name. If your iPhone is called something like “John’s iPhone” then this might work. Go to Settings > General > About > Name and change it to something with no apostrophe.
Some people have reported success by putting the iPhone into Airplane mode and then going to Settings > General > Reset > Reset Network Settings, but the problem may return.
You could also try going to Settings > Control Center and disable Access on Lock Screen then turn your iPhone off and on again.
Make sure that your router firmware is up to date.
Try backing up your iPhone and then restoring it. Check how to factory reset an iPhone for details.
If nothing is working for you, try contacting Apple or take your iPhone into an Apple Store.
Succes, Lex

How to insert data from *.dmp file to oracle 11g using Oracle SQL Develope

hi
i backup my database using PL/SQL developer and made *.dmp file
how to insert data from *.dmp file to oracle 11g using Oracle SQL Developer 2.1.1.64
and how to make *.dmp file from sql*plus ?
thanks in advance

Pl/Sql developer has a config window, there you choose the exec to do the import/export.
Find it and his home version, it may be exp or expdp, the home version is the version of the client where the exp executable is.
Then use the same version of imp or impdp to execute the import, you do not need to use Oracle SQL Developer 2.1.1.64. If you want to use it, you must have the same version in the oracle home that exp/imp of sql developer use.

How to upload data from excel to form using webutil

Hi,
In the sample provided by Oracle
http://www.oracle.com/technology/products/forms/htdocs/webutil/howto_ole.html
Note 247606.1 How to Copy Records From a Form Into Excel
It shown the methods of how to copy data from form to excel but is there any sample to provide the step on how to read the cell from excel into Form in 10g.

declare
args client_ole2.list_type;
application client_ole2.obj_type;
vworkbooks client_ole2.obj_type;
vdoc client_ole2.obj_type;
vworksheet client_ole2.obj_type;
vrange client_ole2.obj_type;
begin
-- create app object
application := client_ole2.create_obj('Excel.Application');
client_OLE2.SET_PROPERTY(application, 'Visible','True');
-- get workbooks object
vworkbooks := client_ole2.get_obj_property(application, 'Workbooks');
-- and open a file
args := client_ole2.create_arglist;
client_ole2.ADD_ARG(args, 'c:\tp_ae.xls');
vdoc :=client_ole2.INVOKE_OBJ(vworkbooks,'Open',args);
client_ole2.destroy_arglist(args);
-- get a worksheet object
-- for this to work you need to know the sheet name or its index
args := client_ole2.create_arglist;
client_ole2.ADD_ARG(args, 1); <-- name or index
vworksheet := client_ole2.get_obj_property(vdoc,'Worksheets',args);
client_ole2.destroy_arglist(args);
-- get a range object which in this case is just a cell
-- for this to work you need to know the cell coordinates
args := client_ole2.create_arglist;
client_ole2.ADD_ARG(args, 'B6');
vrange := client_ole2.get_obj_property(vworksheet,'Range',args);
client_ole2.destroy_arglist(args);
-- and here you get the value
message(client_ole2.get_char_property(vrange,'Value'));
-- release objects
client_ole2.release_obj(vrange);
client_ole2.release_obj(vworksheet);
client_ole2.release_obj(vdoc);
client_ole2.release_obj(vworkbooks);
client_ole2.release_obj(application);
end;

HOW TO UPLOAD DATA FROM EXCEL TO INTERNALTABLE

HI,
HOW TO UPLOAD DATA FROM EXCEL TO INTERNALTABLE? & WITH EXAMPLE.

hi,
chk this, put the data into an excel file.
fields inside it are name and age.
sample excel sheet.
coloumn 1 is name and column 2 is age
name age
A 8
C 13
D 55
DATA : int_excel LIKE alsmex_tabline OCCURS 0 WITH HEADER LINE.
data : record like db_name_age occurs 0 with header line.
DATA : v_start_col TYPE i VALUE '1', "starting col
 v_start_row TYPE i VALUE '1', " starting row
 v_end_col TYPE i VALUE '2', " total columns
 v_end_row TYPE i VALUE '10'. "total no of record
FORM f_upload .
CLEAR : int_excel, int_excel[].
CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
 EXPORTING
 filename = wf_filename
 i_begin_col = v_start_col
 i_begin_row = v_start_row
 i_end_col = v_end_col
 i_end_row = v_end_row
 TABLES
 intern = int_excel
 EXCEPTIONS
 inconsistent_parameters = 1
 upload_ole = 2
 OTHERS = 3.
IF sy-subrc <> 0.
*Message is 'Unable to upload data from ' wf_filename.
 MESSAGE e169(zm050) WITH wf_filename.
ELSE.
 SORT int_excel BY row col.
 REFRESH : record.
 CLEAR : record.
 LOOP AT int_excel.
 CASE int_excel-col. "go thru each column.
 WHEN 1.
 record-name = int_excel-value.
 WHEN 2.
 record-age = int_excel-value.
 ENDCASE.
 AT END OF row.
 APPEND record.
 CLEAR record.
 ENDAT.
 ENDLOOP.
*inserting into table
modfiy db_name_age from table record.
ENDIF.
ANOTHER EXAMPLE
TYPE-POOLS truxs.
types: begin of t_tab,
col1(5) type c,
col2(5) type c,
col3(5) type c,
end of t_tab.
data : itab type standard table of t_tab,
 wa type t_tab.
data it_type type truxs_t_text_data.
parameter p_file type rlgrap-filename.
data ttab type tabname.
at selection-screen on value-request for p_file.
CALL FUNCTION 'F4_FILENAME'
EXPORTING
PROGRAM_NAME = SYST-CPROG
DYNPRO_NUMBER = SYST-DYNNR
FIELD_NAME = 'P_FILE'
IMPORTING
FILE_NAME = p_file
start-of-selection.
CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
EXPORTING
I_FIELD_SEPERATOR =
I_LINE_HEADER = 'X'
i_tab_raw_data = it_type
i_filename = p_file
tables
i_tab_converted_data = itab[]
EXCEPTIONS
CONVERSION_FAILED = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
end-of-selection.
loop at itab into wa.
write : wa-col1,
 wa-col2,
 wa-col3.
endloop.
rgds,
anver
if hlped pls mark points

How to upload data from excel to SAP and options to be used

How to upload data from excel to SAP and options to be used
thank you,
Regards,
Jagrut Bharatkumar shukla

Hi Jagrut,
You can use gui_upload.
chk the sample program mentioned below.
REPORT ZFTP .
DATA: BEGIN OF I_FILE OCCURS 0,
DATA(2000) TYPE C,
END OF I_FILE.
DATA: BEGIN OF I_FILE2 OCCURS 0,
DATA(2000) TYPE C,
END OF I_FILE2.
DATA: W_COUNT TYPE I.
PARAMETERS: P_FILEN TYPE STRING,
P_FILE2 TYPE STRING,
P_NUM(4) TYPE N..
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILEN.
PERFORM F_FILE_GET USING P_FILEN TEXT-G01.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE2.
PERFORM F_FILE_GET USING P_FILE2 TEXT-G01.
START-OF-SELECTION.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = P_FILEN
FILETYPE = 'ASC'
HAS_FIELD_SEPARATOR = 'X'
HEADER_LENGTH = 0
READ_BY_LINE = 'X'
DAT_MODE = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
CHECK_BOM = ' '
VIRUS_SCAN_PROFILE =
NO_AUTH_CHECK = ' '
IMPORTING
FILELENGTH =
HEADER =
tables
data_tab = I_FILE
IF SY-SUBRC <> 0.
MESSAGE E024(Z1).
ENDIF.
LOOP AT I_FILE.
W_COUNT = W_COUNT + 1.
IF NOT W_COUNT > P_NUM.
MOVE I_FILE TO I_FILE2.
APPEND I_FILE2.
ENDIF.
ENDLOOP.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
BIN_FILESIZE =
filename = P_FILE2
FILETYPE = 'ASC'
APPEND = ' '
WRITE_FIELD_SEPARATOR = 'X'
HEADER = '00'
TRUNC_TRAILING_BLANKS = ' '
WRITE_LF = 'X'
COL_SELECT = ' '
COL_SELECT_MASK = ' '
DAT_MODE = ' '
CONFIRM_OVERWRITE = ' '
NO_AUTH_CHECK = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
WRITE_BOM = ' '
TRUNC_TRAILING_BLANKS_EOL = 'X'
WK1_N_FORMAT = ' '
WK1_N_SIZE = ' '
WK1_T_FORMAT = ' '
WK1_T_SIZE = ' '
IMPORTING
FILELENGTH =
tables
data_tab = I_FILE2
FIELDNAMES =
*& Form F_FILE_GET
text
-->P_P_FILEN text
-->P_TEXT_G01 text
FORM F_FILE_GET USING L_FILENA L_TEXT.
CALL FUNCTION 'WS_FILENAME_GET'
EXPORTING
DEF_FILENAME = ' '
DEF_PATH = ' '
MASK = ',.,*.TXT.'
MODE = 'O'
TITLE = L_TEXT
IMPORTING
FILENAME = L_FILENA
rc =
EXCEPTIONS
INV_WINSYS = 1
NO_BATCH = 2
SELECTION_CANCEL = 3
SELECTION_ERROR = 4
OTHERS = 5
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Reward if helpful.
Regards,
Harini.S

How to send data from internal table to the shared folder in ABAP

Hi experts,
My requirement is to transfer data from a file to shared folder. i just did reading data from a file to a internal table. Now i want to send this internal table data into a shared folder which is "
xxx\y\z....".
I do not have any idea on how to send data from internal table to the shared folder path.
can anybody please help me out how to do this?
Thanks & Regards
Sireesha.

Where that folder is located, its on presentation server i.e. desktop or application server.
If its on presentation server, use FM GUI_UPLOAD.
If its on application server, then use DATASET functions. Have a look at below link.
[File Handling in ABAP|http://help.sap.com/saphelp_nw04/helpdata/en/fc/eb3ca6358411d1829f0000e829fbfe/frameset.htm]
I hope it helps.
Thanks,
Vibha
Please mark all the useful answers

How to delete songs from itunes backup file

how to delete songs from itunes backup file

There is nothing to delete, as no iTunes content is included in any iPhone backup.

How to reinstall data from hp backup discs

Similar Messages

Maybe you are looking for