How to "reinstall" Rapid Start?
I replaced the HD with an SSD in my x230 and instead of a complete disk image I was lazy and only restored the system partition (C). Well, I also wanted to see if the Paragon OS Migration tool worked and it only had the option to select a source partition. I want to get Rapid Start set up but I'm not finding a lot of information related to Lenovo laptops. The Rapid Start option is enabled in BIOS and Power Manager 6 still has the 30 day standby option enabled and checked, but there is definitely no hibernation partition. It seems all I need to do is carve out a hibernation partition and give it the proper ID but that seems too easy. On the other hand I may be trying to make it harder than it is.
Considering the above information, after I create a special hibernation partition is there anything else I need to do to enable Rapid Start? Thx.
Solved!
Go to Solution.
It is that easy! I created the partition and tested per the instructions at the link below. Many thanks to someotherguy (Lenovo staff) for the info.
http://forums.lenovo.com/t5/T400-T500-and-newer-T-series/T430s-30-day-standby-how-to-determine-it-is...
Similar Messages
-
No matter how many times I start itunes on my pc I have to agree to the terms of service again and when it does open my settings have all been changed. Why is it doing this and how can I stop it? Reinstalling/repairing does not fix it.
McAfee AntiVirus by any chance? See the thread Why does iTunes delete my itunesprefs.xml?
Or it could be an issue with the SC Info folder. See TS1277 - iTunes: Missing folder or incorrect permissions may prevent authorization for details.
Or a repair install of iTunes from the Programs and Features control panel might fix the problem.
tt2 -
How to use Intel Rapid Start technology on my ThinkPad Edge 531 computer?
I have a Thinkpad Edge 531 (model 6885-73G) preloaded with Windows 7 64bit. According to the appropriate user guide (see Thinkpad E531 User Guide - page 108) and chipset specifications Mobile Intel® HM77 Express this ThinkPad model supports Intel Rapid Start Technology with a special partition on the SSD M.2.Such an SSD with the specification M.2 (see MyDigitalSSD Super Cache 2) I bought it and installed successfully on my ThinkPad, which can run a cache software FNet HybriDisk on.
However, even if I proceed exactly according to the installation script by Intel, see (Intel Rapid Start Technology User Guide) or by the installation script by Lenovo community, (see Edge E330 and Intel Rapid Start), I can not put into operation Intel Rapid Start Technology on my ThinkPad, although I use the installed SSD disk with an alone partition of appropriate type (with ID type 84 on MBR) with more allocated space than the size of RAM for my ThinkPad and with the currently deployed version of BIOS (1.29) and current drivers, such is Intel (R) Rapid Storage Technology Driver version 11.1.5.1001 downloaded from the webiste of Lenovo support for this model ThinkPad Edge 531.
Since, in my opinion, based on the above specifications declared by the manufacturer Lenovo and Intel, this ThinkPad model should support Intel Rapid Start Technology, I would like therefore to know how this technology on my ThinkPad to put into operation, because of which I also bought this ThinkPad model. Does exist for this model ThinkPad Edge 531 some specific deployment scenario of Intel Rapid Start Technology? Does anyone have any practical experience with the launch of this technology on those ThinkPad models? Can it be expected that the full support of Intel Rapid Start Technology for the ThinkPad Edge 531 will occur after the release of a new version of the BIOS or a new version of Solid State Drive Firmware Update Utility with support for MyDigitalSSD Super Cache 2 published on the website of Lenovo support?
Thanks in advance for any advice and guidance with the launch of Intel Rapid Start Technology on my ThinkPad Edge 531.Hi @nmulji ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP ENVY TouchSmart 15t-j000 Notebook and issues with Raid technology. Here is a link that helps with the driver for your Notebook.
You might need this update for software and drivers with the Intel Management Engine Interface.
Here is a link to the HP Support Assistant if you need it. Just download and run the application and it will help with the software and drivers on your system at the time of purchase. If something is not updated this could be causing an issue.
Please let me know how this goes.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping! -
downloaded Reader XI and started to recieve error 40000015, found the fourm with the patch to the registery fix, now it tells me unable to connect to the server. To many bugs with the reader, how do reinstall an older version?
I click on the launcher and nothing happens, 15 min later it will tell cant connect to the server.
My computer is a windows 8.1; 64 bit operating system. I am stationed in South Korea, but that should not affect the program. Help please.
JohnHi johnd83157268,
Sorry for the inconvenience that has caused to you.
Could you please let me know what changes have you made in the registry.
You might need to uninstall Adobe Reader from Control Panel and try install it again from the following link:
Adobe Reader Install for all versions
Please ensure that you are logged in as administrator and anti-virus is disabled as that might interrupt installation.
Try again and then let me know.
Regards,
Anubha -
Lenovo U310: Clean Windows 7 Installation Guide (including Rapid Start and Caching)
Hi there,
this is the first time that I am writing such a guide/tutorial/whatever you may call it – there are probably better ones, but though not being a total computer noob, it took me almost one week to get this pretty (now again) little beast running again. So hopefully this helps some others to avoid such stupid downtimes.
A brief overview on what has happened to my original win 7 Home Premium:
As some may know, this laptop is very well usable as a “Hackintosh” called Macbook clone. So that’s what I did. It turned out to be nice, but I wanted to go back to Windows after a while, using a clean W7 Pro installation to start over. Actually an easy task, format all drives, install Windows, be happy. Just as I had been doing this for years. Unfortunately, it turned out to be a real challenge. First, I couldn’t “see” my drives during installation (and thus not install), then I got random errors during installation aborting it at different points and finally rapid start and caching didn’t work. Every time I tried to activate them (after Win installation), it crashed my PC. I even found an (official Lenovo!) guide stating to install W7 on the SSD, which worked, but sucks due to space limitations. Oh and another very nice thing: The SSD showed up during WIN installation (but not the classical hard drive) stating it was about 60 GB. So as you can see, I have had a lot of different tries and errors. Why I didn’t use Lenovo Easy Recover? As said before, I erased all partitions…
Before we start: If you have a good Windows running on the Laptop, do yourself a favor and disconnect the RAID 0 disks using the Intel Rapid Storage Application before(!!!) proceeding. It will make things much easier. And don’t forget to get all you data on an external drive or something.
Ok, now let’s start.
1.) Prepare a USB Stick with the following driver
http://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=21730 (choose f6flpy-x64.zip If you’re running a
64-bit system (standard nowadays), take f6flpy-x86.zip if it is a 32-bit Windows, just download and copy them
into the stick’s root directory) and plug this stick in one of the left side USB ports.
2.) You’ll need Win 7 on either a DVD (plus external drive, for sure) or (bootable) USB stick
3.) Connect your drive/stick (with W7) to the right side USB port.
4.) Switch the computer on, immediately hit FN and F2. That will open the BIOS.
5.) In the BIOS, navigate to the very right section (“save and exit”) and navigate the cursor to “load setup defaults”.
Hit enter to approve.
6.) After that, go to the “boot” tab and disable UEFI-boot.
7.) Next, go one more tab to the left and set the controller setting to RAID (NOT AHCI or Compatible!!!).
8.) Navigate the cursor down to “Intel Rapid Start” and hit enter. A submenu will pop up-
9.) Disable the first entry in that window, that will make the rest be disabled as well.
10.) Navigate to the very right tab, this time hit save and exit.
11.) The PC restarts.
12.) Immediately hit FN and F12 to open the boot selection menu. Select to boot from your W7 DVD drive or USB
stick.
13.) Click yourself through the whole process of installing Windows 7 until the page comes up where you will have
to select where to install it.
14.) Click on “load drivers” and after a few seconds your downloaded driver should be there. Click ok to use them.
Please do this step even if you can see your drives (SSD Disk 0, 32 GB and HDD Disk 1, 465(<-?) GB) as you
would expect them – otherwise you’re very likely to get an error during the install process.
15.) Now erase all partitions on both drives and select the HDD as the drive to install W7 to – NOT THE SSD!!!!!
Seriously, don’t choose the SSD.
16.) Windows will probably say that some extra partitions are necessary and so on, click ok and install Windows.
17.) After the installation has finished and you see your Desktop, I suggest you to proceed with the next steps in the
following order to see as early as possible if you are on the right way.
18.) Install the Chipset driver, restart.
19.) Install the Intel Rapid Storage “driver” and check the box where it asks to additionally install the control center.
Reboot.
20.) Go into BIOS (FN and F2) and enable Intel Rapid Start (the one you disabled in Step 8 and 9)
21.) Boot into Windows.
22.) Click on the Windows button, type cmd and right klick on the cmd.exe, select to run it as Admin.
23.) Now you’ll create a hibernation partition on the SSD. (which by now should be completely empty as we’ve
deleted all partitions in step 15)
24.) In the command prompt that we have just opened, type: (without quotas, for sure)
“diskpart” and hit the enter button
“list disk” and hit the enter button
Now you should see your ssd as disk 0 and your hdd as disk 1
If your ssd is disk 0 (that would be standard), write “select disk 0”, otherwise write: “select disk 1”, and hit the enter button.
Now write “create partition primary size=4096” and hit enter again. [if you have 4GB of ram, type 4096, if you have 8 GB of ram, use 8192]
Now write “detail disk” and hit enter to see the volume number behind the volume that we have just created (it is 4 GB or 8 respectively, should be easy to find), in my case that was “2”
Now type “select volume 2” if your 4 or 8 GB volume has number 2 as well, otherwise use the number you found out in step f. Hit enter.
Finally, type: “set id=84 override” and hit enter for one last time.
It should now say back that the id has been set successfully.
Exit the command prompt. (close)
25.) Reboot
26.) Install the Rapid Start driver. Reboot.
27.) Open the Intel Rapid Storage Application.
28.) Click on accelerate and approve the settings. Two RAID’s will be created. Reboot.
29.) Install the remaining drivers, have fun with Windows Update and that’s it!
Good luck to all of you… And hey Lenovo - wouldn't that have been your job after all these posts showing your costumers in trouble? Just my two cents...
If you want, you can now turn on UEFI-boot in BIOS.
PS: If, after installing all drivers, you happen to see one unknown device in your device manager – this one belongs to Lenovo Connect Software that came with your Laptop. (Updates FB, Email etc when PC is in sleep mode) If you install Lenovo Connect it’s going to be fine, however, I would not recommend it as it is said to use a lot of energy and cause some other problems. So just live with it, your PC is totally fine without it.
Kind regards from ShanghaiSeriously guys, I can't use my 3 days old laptop. Some help would be mostly appreciated. At this point, the network connection issue doesn't show up anymore, it's just a blank screen after reboot. I reinstall windows and do it all over again just to achieve the same result.
Now couple of things caught my attention: as I load the "6flpy-x64.zip" driver from step 14, I get a message saying I need to install signed drivers, because unsigned ones are likely to mess up the system.
Secondly, I could not find any Rapid Storage Technology drivers for Windows 7 (particularly for U310 model), so I use the Windows 8 ones (http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS031455), which seems a silly thing, yet I know of no alternatives.
Could it be any of these issues to cause my problem? Or smth else? Please help! -
How to reinstall windows 8 on bootcamp
how to reinstall windows 8 on bootcamp macbook pro, without losing anything on OS (Apple) side
Start Bootcamp Assistant then select the option to remove Windows and return your drive to a single partition. Once Windows is removed start Bootcamp Assistant again and select the option to install Windows. Follow the Bootcamp instructions for installing Windows.
This process will not cause lose of OSx data or applications if done correctly. But as allways, create a good backup of your data because things sometimes go wrong or instructions are not followed causing data lose. -
Lenovo IdeaPad U310 Intel Rapid Start Technology with WIndows 7 Ultimate
Hello,
I have upgraded my Windows 7 Home Premium to Ultimate. Got it in my domain and everything seems normal . But I wanted to check the options of that energy saving settings and can't find any information about, when does my computer go to hibernate. He does use the stand by, but for how long? Until the battery is low? That makes no sense.
The computer must go in hibernate or is this with ultrabooks going other ways?Hi
I have further investigated and found a solution for hibernation
In order to enable hibernate in Lenovo Machines SSD support models, you will need to restart and Enter into the BIOS Setting
1. Press Fn+ F2 to enter BIOS
2. Choose "Configuration > SATA controller working mode" as "RAID";
3. Select "Configuration>Intel Rapid Start Technology", choose " iRST Support" and "Entry on S3 critical battery event" as "Disable";
. It will then automatically return to an available Windows power options setting. However, iRST (Intel Rapid Start Technology) does not have the ability to wake a system from hibernate.
Now restart the system and you will find hibernation option is enabled under power option
Hope This Helps
Cheers!!!
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
How to send a private message? --> Check out this article.
English Community Deutsche Community Comunidad en Español -
by mistake i erase my macbook pro hard disk how to reinstall the yosemite on my macbook because it donsnt read the bootable drive?
usamafrombeverly hills wrote:
when i start the macbook & press cmd+R it goes to the internet recovery
Well then when you erased your hard drive, your erased the Recovery partition, also.
Use Internet Recovery to either restore from your Time Machine backup or reinstall the OS if you don't have a TM Backup.
It will install the OS that shipped on that Mac. You can then upgrade via the App Store. -
How to reinstall Windows 8 on Yoga 13 with damaged Recovery Image?
I changed the partitions on my Yoga 13. Now it is not possible to refresh, reinstall or perform an advance start-up, as it looks like there is no recovery image anymore. The systems is currently very messy and needs a reinstall.
Can someone tell me how to reinstall Windows 8 on the Yoga 13 when the recovery image is lost or damaged?hi Chevex,
Thanks for using Lenovo Community Forums!
In the event that the Recovery partition is not working the only option is to use the Recovery CD that you can create when you first got the computer.
but if you were not able to create a Recovery CD and the Onekey Recovery is not working.
You can get the Recovery CD from the Software Department (Fees may apply to the discs)
you can contact the Hardware Team again and ask to be transferred to Software team for purchasing RCD
Lenovo Technical Support (US)
IDEA-branded and
B, C, E, G, H, K, N, Q, V, Y Series Products
English
1-877-4-Lenovo
(1-877-453-6686)
24 hours a day
7 days a week
Hope this helps,
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter! -
GarageBand '11 (6.0.5) How to reinstall MagicGB & Apple Loop Package?
Alright,
Up until the newest update to OSX Mavericks (10.9) I was able to use Magic Garageband & Apple Loops Library with the free added content that it prompted me the first time I used it, which was about 1.5 gigs of content it downloaded directly from Apple. Now since the clean install of the new OS on both my late 2012 Mac Book Pro and late 2012 Mac Mini (both are drive free versions so they came with no discs), I no longer have either of these features in GarageBand '11 (6.0.5).
Does anyone know how to reinstall/download them?
Garage band used to download them automatically the first time I started up the software but now Magic Garageband has nothing in it and I get a popup anytime I open a new project saying "Please reinstall the Apple Loop Package".
Is anyone else having this isssue?
How would I go about fixing it?
Thanks in Advance,
Michael Jos Moore
@mooremichaelcomThe saved effects are stored in your User Library - you need to uninstall it.
Quit GarageBand, if it is running.
Open your User Library and open the folder
~/Library/Application Support/GarageBand/Instrument Library/Plug-In Settings/Compressor/
Remove the setting you just created and saved from the "Compressor" folder.
Restart your Computer. (Don't skip this step - it is necessary in Mavericks).
Your User library is hidden by default since MacOS X 10.7. Lion.
Select the "Home" folder icon (the little house) in the Finder's sidebar and press the key combination ⌘J to open the "view options".
Enable "Show Library Folder". -
How to reinstall apps in a new device. I downlowad from " selection of premium apps" last Dec
Hi,All
I downloaded and installed some apps from " selection of premium apps" last December.
The device I installed was 9780.
Now, I am starting to use a new 9900 device.
How to reinstall apps I downloaded in my new 9900? My old 9780 would be erased.
The app world store asked my credit card info for charging me again when I tried to reinstall these apps, such as DriveSafe.ly Pro, Photo Editor Ultimate , etc.The Apple Support Communities are an international user to user technical support forum. As a man from Mexico, Spanish is my native tongue. I do not speak English very well, however, I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture perhaps very very different from your own. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
Apple doesn't sell the iLife apps on a disk any longer and Apple Care doesn't sell Apple software, the Apple Retail store does. The apps this "Apple emplyee" placed for free on your Mac are not the same versions of the apps that came preinstalled on the Mac and they are not the Mac App Store (MAS) versions. And they will not be udates by the MAS. You may be able to get updates through Software Update.
I doubt that it is a policy of Apple to have its employees installing the iLife apps from an old disk for free on 2nd hand Macs, so others trying to get this done may not be successful. -
How to reinstall safari browser in my emac power G4 running classic?
how to fix my start-up not open classic and how to reinstall safari browser?
There is no Classic version of Safari. The earliest version of Safari came out in 2003 and could run on Mac OS X 10.2. In order to run Safari and Mac OS 9 side by side, you need Mac OS X 10.4.11 or earlier installed to have Classic.
Mac OS X 10.3 was the first to include Safari prebundled.
Your 10.4 installer discs include Safari, which you can extract with http://www.charlessoft.com/ Pacifist.
Your eMac installer discs include the restore application to reinstall Classic environment:
http://support.apple.com/kb/HT1561 -
How to reinstall plugin Media Core CFHD AVI importer 32 and MOV importer 32.pm?
I instralled the After Effects trial program and it was running okay for a few days, then I was hit with a warning to reinstall plugins. How to reinstall plugin Media Core CFHD AVI importer 32 and MOV importer 32.pm?
Has anyone figure this out?
I started getting this after installing GoPro Studio 2.
Uninstalling it and even deleting the plugins manually didn't work, and neither did reinstalling AE.
All I could get was stop getting the error message at start-up but the problem is that any .AVI file that I import only plays audio, no video.
Please, any help appreciated. -
Good evening,
I've just finished installing Oracle E-Business Suite - 11.5.10.2 version Rapid Start (if u don't know it is a pre-setup environment, but it is exactly the same product)
I've installed it on Oracle Enterprise Linux version 4, following all pre-requisites.
I can logon to the application, choose a responsibility and when i pick a function to open the Oracle Forms, nothing happens.
It isn't a problem with Jinitiator, becuase it isn't prompted to installed, the problem is before the application ask to install this Jinitiator.
When i checked the address
http://avantasia.angra.com:8000/dev60cgi/f60cgi
The browser tells me that:
Oracle Forms Web CGI: Error detected
Error: Parameter "play" not found in URL or configuration parameters.
This make me happen that i have a problem with the last step of the Rapid Start installation, the execution of a file name "formsplayback.sh"
Do you have some idea of what is the problem and how to solve it ?
If someone needs more information i can upload the instructions of this archive "formsplayback.sh" or anything else.
Anyway thanks so much,
Gustavomdtaylor
I've stopped and started it all manually but...same problems occur. It seems that forms try to goes up, but is cut in the middle suddenly.
hsawwan
I've checked the directory you tell me.
a) Database Tier: I'm putting the log files that if found there
1) adconfig.log
Starting AutoConfig at Fri Mar 28 00:41:18 2008
Using adconfig.pl version 115.56.11511.2
Using java command : /erpp/erppdb/9.2.0/jre/1.4.2/bin/java
Java version : 1.4.2_02
Classpath : /erpp/erppdb/9.2.0/jre/1.4.2/lib/rt.jar:/erpp/erppdb/9.2.0/jdbc/lib/ojdbc14.jar:/erpp/erppdb/9.2.0/appsutil/java/xmlparserv2.zip:/erpp/erppdb/9.2.0/appsutil/java:/erpp/erppdb/9.2.0/jlib/netcfg.jar
===========================================================================
Starting Utility to Report Version Conflicts at Fri Mar 28 00:41:20 GMT-03:00 2008
Using VersionConflictListGenerator.java version 115.2
All driver files processed.
No version conflict encountered.
===========================================================================
Using Context file : /data/erpp/erppdb/9.2.0/appsutil/ERPP_avantasia.xml
Attempting to create a back up of the Context file
Created back up file of name :
/erpp/erppdb/9.2.0/appsutil/out/ERPP_avantasia/03280041/ERPP_avantasia.xml
===========================================================================
Starting synchronization of file system Context file and its templates with those in the database
Database connection : Failed
OAM Context editing support feature: Unverified
OAM Customization support feature : Unverified
File system template : /erpp/erppdb/9.2.0/appsutil/template/adxdbctx.tmp
Checking for customizations to Context template
Warning: Unable to connect to Database.
If the system is OAM enabled, this may result in loss of customizations.
Looking for custom template at : /erpp/erppdb/9.2.0/appsutil/template/custom/adxdbctx.tmp
Custom template : Not available
Customizations found : None
File system Context file :/data/erpp/erppdb/9.2.0/appsutil/ERPP_avantasia.xml
Checking the Context file for possible updates from the Database
Warning: Unable to connect to Database.
If the system is OAM enabled, this may result in loss of customizations and the Context files in DataBase and in the file system may be unsynchronized
===========================================================================
Starting Updates of Context file Fri Mar 28 00:41:22 GMT-03:00 2008
found context version : 115.71
available update version : 115.71
No updates to apply
Ending Updates of Context file
===========================================================================
===========================================================================
Config Tool CVMHelper started at Fri Mar 28 00:41:22 GMT-03:00 2008
===========================================================================
Updating local context file variables for Database Tier
Making database connection using DBUtil
ADX Database Utility
getConnectionUsingAppsJDBCConnector() -->
APPS_JDBC_URL='null'
Trying to get connection using SID based connect descriptor
getConnection() -->
sDbHost : avantasia
sDbDomain : angra.com
sDbPort : 1521
sDbSid : ERPP
sDbUser : APPS
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@avantasia.angra.com:1521:ERPP
Exception occurred: java.sql.SQLException: Excepción de E/S: The Network Adapter could not establish the connection
Trying to connect using SID as ServiceName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=avantasia.angra.com)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=ERPP)))
Exception occurred: java.sql.SQLException: Excepción de E/S: The Network Adapter could not establish the connection
Trying to connect using SID as ServiceName.DomainName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=avantasia.angra.com)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=ERPP.angra.com)))
Exception occurred: java.sql.SQLException: Excepción de E/S: The Network Adapter could not establish the connection
Connection could not be obtained; returning null
-------------------ADX Database Utility Finished---------------
Exception occurred while preseeding variables in the context file: java.sql.SQLException: Could not get connection to the database
StackTrace:
java.sql.SQLException: Could not get connection to the database
at oracle.apps.ad.tools.configuration.CVMHelper.processNewContextFile(CVMHelper.java:525)
at oracle.apps.ad.context.CtxValueMgt.preSeed2Ctx(CtxValueMgt.java:1714)
at oracle.apps.ad.context.CtxValueMgt.processCtxFile(CtxValueMgt.java:1516)
at oracle.apps.ad.context.CtxValueMgt.main(CtxValueMgt.java:661)
===========================================================================
Starting Context Value Management System at Fri Mar 28 00:41:22 GMT-03:00 2008
Using version 115.31
Options:
Force : no
Contextfile : /data/erpp/erppdb/9.2.0/appsutil/ERPP_avantasia.xml
Templatefile : /erpp/erppdb/9.2.0/appsutil/template/adxdbctx.tmp
ValueUpdateFile : /erpp/erppdb/9.2.0/appsutil/template/adcvmdb.xml
Verifying value management system requirements:
ContextFile : VALID
Template File : VALID
ValueUpdateFile : VALID
Parsing the ValueUpdateFile
[ s_contextfile ]
Action : seed
Change reason : Setting the location to what has been specified by user
New value : /data/erpp/erppdb/9.2.0/appsutil/ERPP_avantasia.xml
[ s_adperlprg ]
Action : seed
Change reason : Setting the location to what has been specified by user
New value : /erpp/erppdb/9.2.0/Apache/perl/bin/perl
[ s_perl5lib ]
Action : seed
Change reason : Setting the location to what has been specified by user
New value : /erpp/erppdb/9.2.0/Apache/perl/lib/5.00503:/erpp/erppdb/9.2.0/Apache/perl/lib/site_perl/5.005:/erpp/erppdb/9.2.0/appsutil/perl
[ s_db_tnsadmin ]
Action : translate
Change reason : Resetting it to correct value
Expected value : /erpp/erppdb/9.2.0/network/admin
Found value : /erpp/erppdb/9.2.0/network/admin/ERPP_avantasia
New value : /erpp/erppdb/9.2.0/network/admin/ERPP_avantasia
Check Condition : Unconditional
INFO : Customer has the new value already in place - skipping
[ s_db_tnsadmin ]
Action : translate
Change reason : Resetting it to correct value
Expected value : /erpp/erppdb/9.2.0/network/admin/ERPP
Found value : /erpp/erppdb/9.2.0/network/admin/ERPP_avantasia
New value : /erpp/erppdb/9.2.0/network/admin/ERPP_avantasia
Check Condition : Unconditional
INFO : Customer has the new value already in place - skipping
[ s_db_linkctrl ]
Action : translate
Change reason : It should be unset in AutoConfig enabled RDBMS setup
Expected value : L_PTHREADS_D7
Found value :
New value :
Check Condition : Unconditional
INFO : Customer has the new value already in place - skipping
[ s_systemname ]
Action : translate
Change reason : Resetting it to correct value
Expected value : ERPP
Found value : ERPP
New value : ERPP
Check Condition : Unconditional
[ s_db_nlslang ]
Action : translate
Change reason : Resetting it to correct value
Expected value : American_America.%s_at_cset%
Found value : American_America.UTF8
New value : American_America.UTF8
Check Condition : Unconditional
INFO : Customer has the new value already in place - skipping
[ s_db_path ]
Action : translate
Change reason : Environment Variables should be updated through the context editor
Expected value : /erpp/erppdb/9.2.0/bin:/usr/bin:/usr/sbin:/erpp/erppdb/9.2.0/jre/1.4.2/bin:$PATH
Found value : /erpp/erppdb/9.2.0/bin:/usr/bin:/usr/sbin:/erpp/erppdb/9.2.0/jre/1.4.2/bin:/usr/ccs/bin:/bin:/usr/bin/X11:/usr/local/bin:$PATH
New value : /erpp/erppdb/9.2.0/bin:/usr/bin:/usr/sbin:/erpp/erppdb/9.2.0/jre/1.4.2/bin:/usr/ccs/bin:/bin:/usr/bin/X11:/usr/local/bin:$PATH
Check Condition : Unconditional
INFO : Customer has the new value already in place - skipping
[ s_db_ldlib ]
Action : translate
Change reason : Environment Variables should be updated through the context editor
Expected value : /erpp/erppdb/9.2.0/lib:/usr/X11R6/lib:/usr/openwin/lib
Found value : /erpp/erppdb/9.2.0/lib:/usr/X11R6/lib:/usr/openwin/lib:/erpp/erppdb/9.2.0/ctx/lib
New value : /erpp/erppdb/9.2.0/lib:/usr/X11R6/lib:/usr/openwin/lib:/erpp/erppdb/9.2.0/lib:/usr/dt/lib:/erpp/erppdb/9.2.0/ctx/lib
Check Condition : Unconditional
INFO : Customer specified value - skipping
===========================================================================
[ Config tool : /erpp/erppdb/9.2.0/appsutil/bin/adgentns.pl ]
Command : /erpp/erppdb/9.2.0/Apache/perl/bin/perl -I /erpp/erppdb/9.2.0/Apache/perl/lib/5.00503:/erpp/erppdb/9.2.0/Apache/perl/lib/site_perl/5.005:/erpp/erppdb/9.2.0/appsutil/perl /erpp/erppdb/9.2.0/appsutil/bin/adgentns.pl PASSWORD contextfile=/data/erpp/erppdb/9.2.0/appsutil/ERPP_avantasia.xml
Action : execute
Warning : Executable is a Symbolic link to /data/erpp/erppdb/9.2.0/appsutil/bin/adgentns.pl
SCRIPT RETURNED:
Generate Tns Names
Using java command: /erpp/erppdb/9.2.0/jre/1.4.2/bin/java
JAVA_HOME :
Java version : 1.4.2_02
Classpath : /erpp/erppdb/9.2.0/jre/1.4.2/lib/rt.jar:/erpp/erppdb/9.2.0/jdbc/lib/ojdbc14.jar:/erpp/erppdb/9.2.0/appsutil/java/xmlparserv2.zip:/erpp/erppdb/9.2.0/appsutil/java
Loading ORACLE_HOME environment from /erpp/erppdb/9.2.0
Logfile: /erpp/erppdb/9.2.0/appsutil/log/ERPP_avantasia/03280041/NetServiceHandler.log
tnsnames.ora instantiated
listener.ora instantiated
adgentns.pl exiting with status 0
ERRORCODE = 0 ERRORCODE_END
.end std out.
.end err out.
Result : SUCCEEDED
===========================================================================
Ending Context Value Management System.
===========================================================================
===========================================================================
No uploading of Context file and its templates to database. Database conection failed
===========================================================================
Updating rdbms version in Context file to db920
Updating rdbms type in Context file to 32 bits
Configuring templates from ORACLE_HOME ...
Processing DriverFile = /erpp/erppdb/9.2.0/appsutil/template/addbtmpl.drv
AutoConfig Profile Phase
Running Instantiation Drivers for AppsUtil
Creation of Directory - /data/erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia Succeeded.
instantiate file:
source : /erpp/erppdb/9.2.0/appsutil/template/adlicnse.sql
dest : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/adlicnse.sql
backup : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/adlicnse.sql to /erpp/erppdb/9.2.0/appsutil/out/ERPP_avantasia/03280041/adlicnse.sql
setting permissions: 600
setting ownership: applerpp:dba
File /erpp/erppdb/9.2.0/network/admin/ERPP_avantasia/listener.ora of type INSTALL already exists, this file will not be instantiated.
File /erpp/erppdb/9.2.0/network/admin/ERPP_avantasia/tnsnames.ora of type INSTALL already exists, this file will not be instantiated.
Creation of Directory - /data/erpp/erppdb/9.2.0/appsutil/scripts/ERPP_avantasia Succeeded.
instantiate file:
source : /erpp/erppdb/9.2.0/appsutil/template/adstopdb.sql
dest : /erpp/erppdb/9.2.0/appsutil/scripts/ERPP_avantasia/adstopdb.sql
backup : /erpp/erppdb/9.2.0/appsutil/scripts/ERPP_avantasia/adstopdb.sql to /erpp/erppdb/9.2.0/appsutil/out/ERPP_avantasia/03280041/adstopdb.sql
setting permissions: 600
setting ownership: applerpp:dba
instantiate file:
source : /erpp/erppdb/9.2.0/appsutil/template/adstrtdb.sql
dest : /erpp/erppdb/9.2.0/appsutil/scripts/ERPP_avantasia/adstrtdb.sql
backup : /erpp/erppdb/9.2.0/appsutil/scripts/ERPP_avantasia/adstrtdb.sql to /erpp/erppdb/9.2.0/appsutil/out/ERPP_avantasia/03280041/adstrtdb.sql
setting permissions: 600
setting ownership: applerpp:dba
instantiate file:
source : /erpp/erppdb/9.2.0/appsutil/template/addbccnv.sql
dest : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/addbccnv.sql
backup : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/addbccnv.sql to /erpp/erppdb/9.2.0/appsutil/out/ERPP_avantasia/03280041/addbccnv.sql
setting permissions: 600
setting ownership: applerpp:dba
instantiate file:
source : /erpp/erppdb/9.2.0/appsutil/template/adclobconv.sql
dest : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/adclobconv.sql
backup : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/adclobconv.sql to /erpp/erppdb/9.2.0/appsutil/out/ERPP_avantasia/03280041/adclobconv.sql
setting permissions: 600
setting ownership: applerpp:dba
instantiate file:
source : /erpp/erppdb/9.2.0/appsutil/template/adclobtmp.sql
dest : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/adclobtmp.sql
backup : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/adclobtmp.sql to /erpp/erppdb/9.2.0/appsutil/out/ERPP_avantasia/03280041/adclobtmp.sql
setting permissions: 600
setting ownership: applerpp:dba
instantiate file:
source : /erpp/erppdb/9.2.0/appsutil/template/adpreclone.pl
dest : /erpp/erppdb/9.2.0/appsutil/scripts/ERPP_avantasia/adpreclone.pl
backup : /erpp/erppdb/9.2.0/appsutil/scripts/ERPP_avantasia/adpreclone.pl to /erpp/erppdb/9.2.0/appsutil/out/ERPP_avantasia/03280041/adpreclone.pl
setting permissions: 700
setting ownership: applerpp:dba
instantiate file:
source : /erpp/erppdb/9.2.0/appsutil/template/adcrobj.sql
dest : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/adcrobj.sql
backup : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/adcrobj.sql to /erpp/erppdb/9.2.0/appsutil/out/ERPP_avantasia/03280041/adcrobj.sql
setting permissions: 700
setting ownership: applerpp:dba
instantiate file:
source : /erpp/erppdb/9.2.0/appsutil/template/adchknls.pl
dest : /erpp/erppdb/9.2.0/appsutil/scripts/ERPP_avantasia/adchknls.pl
backup : /erpp/erppdb/9.2.0/appsutil/scripts/ERPP_avantasia/adchknls.pl to /erpp/erppdb/9.2.0/appsutil/out/ERPP_avantasia/03280041/adchknls.pl
setting permissions: 700
setting ownership: applerpp:dba
instantiate file:
source : /erpp/erppdb/9.2.0/appsutil/template/ad8idbux.env
dest : /erpp/erppdb/9.2.0/ERPP_avantasia.env
backup : /erpp/erppdb/9.2.0/ERPP_avantasia.env to /erpp/erppdb/9.2.0/appsutil/out/ERPP_avantasia/03280041/ERPP_avantasia.env
setting permissions: 644
setting ownership: applerpp:dba
instantiate file:
source : /erpp/erppdb/9.2.0/appsutil/template/adupdlib_ux.sql
dest : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/adupdlib.sql
backup : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/adupdlib.sql to /erpp/erppdb/9.2.0/appsutil/out/ERPP_avantasia/03280041/adupdlib.sql
setting permissions: 600
setting ownership: applerpp:dba
instantiate file:
source : /erpp/erppdb/9.2.0/appsutil/template/adcrdb.sh
dest : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/adcrdb.sh
backup : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/adcrdb.sh to /erpp/erppdb/9.2.0/appsutil/out/ERPP_avantasia/03280041/adcrdb.sh
setting permissions: 700
setting ownership: applerpp:dba
instantiate file:
source : /erpp/erppdb/9.2.0/appsutil/template/adsvdb.sh
dest : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/adsvdb.sh
backup : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/adsvdb.sh to /erpp/erppdb/9.2.0/appsutil/out/ERPP_avantasia/03280041/adsvdb.sh
setting permissions: 700
setting ownership: applerpp:dba
instantiate file:
source : /erpp/erppdb/9.2.0/appsutil/template/adsvdlsn.sh
dest : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/adsvdlsn.sh
backup : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/adsvdlsn.sh to /erpp/erppdb/9.2.0/appsutil/out/ERPP_avantasia/03280041/adsvdlsn.sh
setting permissions: 700
setting ownership: applerpp:dba
instantiate file:
source : /erpp/erppdb/9.2.0/appsutil/template/adsvdcnv.sh
dest : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/adsvdcnv.sh
backup : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/adsvdcnv.sh to /erpp/erppdb/9.2.0/appsutil/out/ERPP_avantasia/03280041/adsvdcnv.sh
setting permissions: 700
setting ownership: applerpp:dba
instantiate file:
source : /erpp/erppdb/9.2.0/appsutil/template/addbprf.sh
dest : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/addbprf.sh
backup : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/addbprf.sh to /erpp/erppdb/9.2.0/appsutil/out/ERPP_avantasia/03280041/addbprf.sh
setting permissions: 700
setting ownership: applerpp:dba
instantiate file:
source : /erpp/erppdb/9.2.0/appsutil/template/addbprf.sql
dest : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/addbprf.sql
backup : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/addbprf.sql to /erpp/erppdb/9.2.0/appsutil/out/ERPP_avantasia/03280041/addbprf.sql
setting permissions: 600
setting ownership: applerpp:dba
instantiate file:
source : /erpp/erppdb/9.2.0/appsutil/template/addbupdgsm.sql
dest : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/addbupdgsm.sql
backup : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/addbupdgsm.sql to /erpp/erppdb/9.2.0/appsutil/out/ERPP_avantasia/03280041/addbupdgsm.sql
setting permissions: 600
setting ownership: applerpp:dba
instantiate file:
source : /erpp/erppdb/9.2.0/appsutil/template/afdbprf.sh
dest : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/afdbprf.sh
backup : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/afdbprf.sh to /erpp/erppdb/9.2.0/appsutil/out/ERPP_avantasia/03280041/afdbprf.sh
setting permissions: 700
setting ownership: applerpp:dba
instantiate file:
source : /erpp/erppdb/9.2.0/appsutil/template/afdbprf.sql
dest : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/afdbprf.sql
backup : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/afdbprf.sql to /erpp/erppdb/9.2.0/appsutil/out/ERPP_avantasia/03280041/afdbprf.sql
setting permissions: 600
setting ownership: applerpp:dba
instantiate file:
source : /erpp/erppdb/9.2.0/appsutil/template/addbctl.sh
dest : /erpp/erppdb/9.2.0/appsutil/scripts/ERPP_avantasia/addbctl.sh
backup : /erpp/erppdb/9.2.0/appsutil/scripts/ERPP_avantasia/addbctl.sh to /erpp/erppdb/9.2.0/appsutil/out/ERPP_avantasia/03280041/addbctl.sh
setting permissions: 700
setting ownership: applerpp:dba
instantiate file:
source : /erpp/erppdb/9.2.0/appsutil/template/addlnctl.sh
dest : /erpp/erppdb/9.2.0/appsutil/scripts/ERPP_avantasia/addlnctl.sh
backup : /erpp/erppdb/9.2.0/appsutil/scripts/ERPP_avantasia/addlnctl.sh to /erpp/erppdb/9.2.0/appsutil/out/ERPP_avantasia/03280041/addlnctl.sh
setting permissions: 700
setting ownership: applerpp:dba
instantiate file:
source : /erpp/erppdb/9.2.0/appsutil/template/adlsnodes_ux.sh
dest : /erpp/erppdb/9.2.0/appsutil/scripts/ERPP_avantasia/adlsnodes.sh
backup : /erpp/erppdb/9.2.0/appsutil/scripts/ERPP_avantasia/adlsnodes.sh to /erpp/erppdb/9.2.0/appsutil/out/ERPP_avantasia/03280041/adlsnodes.sh
setting permissions: 700
setting ownership: applerpp:dba
instantiate file:
source : /erpp/erppdb/9.2.0/appsutil/template/adlnkoh.sh
dest : /erpp/erppdb/9.2.0/appsutil/install/adlnkoh.sh
backup : /erpp/erppdb/9.2.0/appsutil/install/adlnkoh.sh to /erpp/erppdb/9.2.0/appsutil/out/ERPP_avantasia/03280041/adlnkoh.sh
setting permissions: 700
setting ownership: applerpp:dba
instantiate file:
source : /erpp/erppdb/9.2.0/appsutil/template/adcrdbrdlg.sh
dest : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/adcrdbrdlg.sh
backup : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/adcrdbrdlg.sh to /erpp/erppdb/9.2.0/appsutil/out/ERPP_avantasia/03280041/adcrdbrdlg.sh
setting permissions: 700
setting ownership: applerpp:dba
instantiate file:
source : /erpp/erppdb/9.2.0/appsutil/template/adautocfg_ux.sh
dest : /erpp/erppdb/9.2.0/appsutil/scripts/ERPP_avantasia/adautocfg.sh
backup : /erpp/erppdb/9.2.0/appsutil/scripts/ERPP_avantasia/adautocfg.sh to /erpp/erppdb/9.2.0/appsutil/out/ERPP_avantasia/03280041/adautocfg.sh
setting permissions: 700
setting ownership: applerpp:dba
instantiate file:
source : /erpp/erppdb/9.2.0/appsutil/template/adcrobj.sh
dest : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/adcrobj.sh
backup : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/adcrobj.sh to /erpp/erppdb/9.2.0/appsutil/out/ERPP_avantasia/03280041/adcrobj.sh
setting permissions: 700
setting ownership: applerpp:dba
File /erpp/erppdb/9.2.0/dbs/initERPP.ora of type INSTALL already exists, this file will not be instantiated.
instantiate file:
source : /erpp/erppdb/9.2.0/appsutil/template/afmkinit.sh
dest : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/afmkinit.sh
backup : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/afmkinit.sh to /erpp/erppdb/9.2.0/appsutil/out/ERPP_avantasia/03280041/afmkinit.sh
setting permissions: 700
setting ownership: applerpp:dba
instantiate file:
source : /erpp/erppdb/9.2.0/appsutil/template/config_ux.c
dest : /erpp/erppdb/9.2.0/rdbms/lib/config.c
backup : /erpp/erppdb/9.2.0/rdbms/lib/config.c to /erpp/erppdb/9.2.0/appsutil/out/ERPP_avantasia/03280041/config.c
setting ownership: applerpp:dba
instantiate file:
source : /erpp/erppdb/9.2.0/appsutil/template/adcmclean.sql
dest : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/adcmclean.sql
backup : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/adcmclean.sql to /erpp/erppdb/9.2.0/appsutil/out/ERPP_avantasia/03280041/adcmclean.sql
setting permissions: 600
setting ownership: applerpp:dba
instantiate file:
source : /erpp/erppdb/9.2.0/appsutil/template/adcctclean.sql
dest : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/adcctclean.sql
backup : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/adcctclean.sql to /erpp/erppdb/9.2.0/appsutil/out/ERPP_avantasia/03280041/adcctclean.sql
setting permissions: 600
setting ownership: applerpp:dba
AutoConfig Setup Phase
Running Setup Process 1 of 2 for AppsUtil
Executing script in InstantiateFile:
/erpp/erppdb/9.2.0/Apache/perl/bin/perl -I /erpp/erppdb/9.2.0/Apache/perl/lib/5.00503:/erpp/erppdb/9.2.0/Apache/perl/lib/site_perl/5.005:/erpp/erppdb/9.2.0/appsutil/perl /erpp/erppdb/9.2.0/appsutil/scripts/ERPP_avantasia/adchknls.pl
script returned:
Validating information needed for NLS........
DATABASE version : db920
No NLS specific checks required
ERRORCODE = 0 ERRORCODE_END
.end std out.
.end err out.
AutoConfig Setup Phase
Running Setup Process 2 of 2 for AppsUtil
Executing script in InstantiateFile:
/erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/afmkinit.sh
script returned:
afmkinit.sh started at vie mar 28 00:41:36 ART 2008
The environment settings are as follows ...
ORACLE_HOME : /erpp/erppdb/9.2.0
ORACLE_SID : ERPP
TWO_TASK :
PATH : /erpp/erppdb/9.2.0/Apache/perl/bin:/erpp/erppdb/9.2.0/bin:/usr/bin:/usr/sbin:/erpp/erppdb/9.2.0/jre/1.4.2/bin:/usr/ccs/bin:/bin:/usr/bin/X11:/usr/local/bin:/erpp/erppdb/9.2.0/Apache/perl/bin:/erpp/erppdb/9.2.0/Apache/perl/bin:/erpp/erppdb/9.2.0/bin:/usr/bin:/usr/sbin:/erpp/erppdb/9.2.0/jre/1.4.2/bin:/usr/ccs/bin:/bin:/usr/bin/X11:/usr/local/bin:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/usr/X11R6/bin:/erpp/homes/oraerpp/bin:/erpp:/erpp/scripts:/sbin:/erpp/erppdb/9.2.0/OPatch
LD_LIBRARY_PATH : /erpp/erppdb/9.2.0/lib:/usr/X11R6/lib:/usr/openwin/lib:/erpp/erppdb/9.2.0/ctx/lib
afmkinit.sh exiting with status 0
.end std out.
.end err out.
AutoConfig Profile Phase
Running Profile Process 1 of 1 for AppsUtil
Executing script in InstantiateFile:
/erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/afdbprf.sh
script returned:
afdbprf.sh started at vie mar 28 00:41:37 ART 2008
The environment settings are as follows ...
ORACLE_HOME : /erpp/erppdb/9.2.0
ORACLE_SID : ERPP
PATH : /erpp/erppdb/9.2.0/Apache/perl/bin:/erpp/erppdb/9.2.0/bin:/usr/bin:/usr/sbin:/erpp/erppdb/9.2.0/jre/1.4.2/bin:/usr/ccs/bin:/bin:/usr/bin/X11:/usr/local/bin:/erpp/erppdb/9.2.0/Apache/perl/bin:/erpp/erppdb/9.2.0/Apache/perl/bin:/erpp/erppdb/9.2.0/bin:/usr/bin:/usr/sbin:/erpp/erppdb/9.2.0/jre/1.4.2/bin:/usr/ccs/bin:/bin:/usr/bin/X11:/usr/local/bin:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/usr/X11R6/bin:/erpp/homes/oraerpp/bin:/erpp:/erpp/scripts:/sbin:/erpp/erppdb/9.2.0/OPatch
LD_LIBRARY_PATH : /erpp/erppdb/9.2.0/lib:/usr/X11R6/lib:/usr/openwin/lib:/erpp/erppdb/9.2.0/ctx/lib
Executable : /erpp/erppdb/9.2.0/bin/sqlplus
SQL*Plus: Release 9.2.0.5.0 - Production on Fri Mar 28 00:41:37 2008
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
ERROR:
ORA-12541: TNS:no listener
ERRORCODE = 1 ERRORCODE_END
.end std out.
.end err out.
AutoConfig Services Phase
Running Service Process 1 of 1 for AppsUtil
Executing script in InstantiateFile:
/erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/adcrobj.sh
script returned:
adcrobj.sh started at vie mar 28 00:41:37 ART 2008
Parameters passed are : APPS apps
The environment settings are as follows ...
ORACLE_HOME : /erpp/erppdb/9.2.0
ORACLE_SID : ERPP
TWO_TASK :
PATH : /erpp/erppdb/9.2.0/Apache/perl/bin:/erpp/erppdb/9.2.0/bin:/usr/bin:/usr/sbin:/erpp/erppdb/9.2.0/jre/1.4.2/bin:/usr/ccs/bin:/bin:/usr/bin/X11:/usr/local/bin:/erpp/erppdb/9.2.0/Apache/perl/bin:/erpp/erppdb/9.2.0/Apache/perl/bin:/erpp/erppdb/9.2.0/bin:/usr/bin:/usr/sbin:/erpp/erppdb/9.2.0/jre/1.4.2/bin:/usr/ccs/bin:/bin:/usr/bin/X11:/usr/local/bin:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/usr/X11R6/bin:/erpp/homes/oraerpp/bin:/erpp:/erpp/scripts:/sbin:/erpp/erppdb/9.2.0/OPatch
LD_LIBRARY_PATH : /erpp/erppdb/9.2.0/lib:/usr/X11R6/lib:/usr/openwin/lib:/erpp/erppdb/9.2.0/ctx/lib
SQLPLUS Executable : /erpp/erppdb/9.2.0/bin/sqlplus
SQL*Plus: Release 9.2.0.5.0 - Production on Fri Mar 28 00:41:37 2008
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
ERROR:
ORA-12541: TNS:no listener
adcrobj.sh exiting with status 1
ERRORCODE = 1 ERRORCODE_END
.end std out.
.end err out.
[AutoConfig Error Report]
The following report lists errors AutoConfig encountered during each
phase of its execution. Errors are grouped by directory and phase.
The report format is:
<filename> <phase> <return code where appropriate>
[PROFILE PHASE]
AutoConfig could not successfully execute the following scripts:
Directory: /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia
afdbprf.sh INSTE8_PRF 1
[APPLY PHASE]
AutoConfig could not successfully execute the following scripts:
Directory: /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia
adcrobj.sh INSTE8_APPLY 1
AutoConfig is exiting with status 2
The log file for this session is located at: /erpp/erppdb/9.2.0/appsutil/log/ERPP_avantasia/03280041/adconfig.log
Starting AutoConfig at Fri Mar 28 00:41:52 2008
Using adconfig.pl version 115.56.11511.2
Using java command : /erpp/erppdb/9.2.0/jre/1.4.2/bin/java
Java version : 1.4.2_02
Classpath : /erpp/erppdb/9.2.0/jre/1.4.2/lib/rt.jar:/erpp/erppdb/9.2.0/jdbc/lib/ojdbc14.jar:/erpp/erppdb/9.2.0/appsutil/java/xmlparserv2.zip:/erpp/erppdb/9.2.0/appsutil/java:/erpp/erppdb/9.2.0/jlib/netcfg.jar
===========================================================================
Starting Utility to Report Version Conflicts at Fri Mar 28 00:41:52 GMT-03:00 2008
Using VersionConflictListGenerator.java version 115.2
All driver files processed.
No version conflict encountered.
===========================================================================
Using Context file : /data/erpp/erppdb/9.2.0/appsutil/ERPP_avantasia.xml
Attempting to create a back up of the Context file
Created back up file of name :
/erpp/erppdb/9.2.0/appsutil/out/ERPP_avantasia/03280041/ERPP_avantasia.xml
===========================================================================
Starting synchronization of file system Context file and its templates with those in the database
Database connection : Established
ADX Database Utility
getConnectionUsingAppsJDBCConnector() -->
APPS_JDBC_URL='null'
Trying to get connection using SID based connect descriptor
getConnection() -->
sDbHost : avantasia
sDbDomain : angra.com
sDbPort : 1521
sDbSid : ERPP
sDbUser : APPS
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@avantasia.angra.com:1521:ERPP
Connection obtained
-------------------ADX Database Utility Finished---------------
OAM Context editing support feature: Enabled
OAM Customization support feature : Enabled
File system template : /erpp/erppdb/9.2.0/appsutil/template/adxdbctx.tmp
Checking for customizations to Context template
Customizations found : None
File system Context file :/data/erpp/erppdb/9.2.0/appsutil/ERPP_avantasia.xml
Checking the Context file for possible updates from the Database
Result : The Context file has no database equivalent
===========================================================================
Starting Updates of Context file Fri Mar 28 00:41:55 GMT-03:00 2008
found context version : 115.71
available update version : 115.71
No updates to apply
Ending Updates of Context file
===========================================================================
===========================================================================
Config Tool CVMHelper started at Fri Mar 28 00:41:55 GMT-03:00 2008
===========================================================================
Updating local context file variables for Database Tier
Making database connection using DBUtil
ADX Database Utility
getConnectionUsingAppsJDBCConnector() -->
APPS_JDBC_URL='null'
Trying to get connection using SID based connect descriptor
getConnection() -->
sDbHost : avantasia
sDbDomain : angra.com
sDbPort : 1521
sDbSid : ERPP
sDbUser : APPS
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@avantasia.angra.com:1521:ERPP
Connection obtained
-------------------ADX Database Utility Finished---------------
Database connection successfully obtained
Updating context file variables for Database Tier
Checking for new context variables
No new variables found in the context file
Processing existing variables with updated defaults
Writing Context File back to File System
Context file updated
Closing connection
Connection closed
===========================================================================
Starting Context Value Management System at Fri Mar 28 00:41:56 GMT-03:00 2008
Using version 115.31
Options:
Force : no
Contextfile : /data/erpp/erppdb/9.2.0/appsutil/ERPP_avantasia.xml
Templatefile : /erpp/erppdb/9.2.0/appsutil/template/adxdbctx.tmp
ValueUpdateFile : /erpp/erppdb/9.2.0/appsutil/template/adcvmdb.xml
Verifying value management system requirements:
ContextFile : VALID
Template File : VALID
ValueUpdateFile : VALID
Parsing the ValueUpdateFile
[ s_contextfile ]
Action : seed
Change reason : Setting the location to what has been specified by user
New value : /data/erpp/erppdb/9.2.0/appsutil/ERPP_avantasia.xml
[ s_adperlprg ]
Action : seed
Change reason : Setting the location to what has been specified by user
New value : /erpp/erppdb/9.2.0/Apache/perl/bin/perl
[ s_perl5lib ]
Action : seed
Change reason : Setting the location to what has been specified by user
New value : /erpp/erppdb/9.2.0/Apache/perl/lib/5.00503:/erpp/erppdb/9.2.0/Apache/perl/lib/site_perl/5.005:/erpp/erppdb/9.2.0/appsutil/perl
[ s_db_tnsadmin ]
Action : translate
Change reason : Resetting it to correct value
Expected value : /erpp/erppdb/9.2.0/network/admin
Found value : /erpp/erppdb/9.2.0/network/admin/ERPP_avantasia
New value : /erpp/erppdb/9.2.0/network/admin/ERPP_avantasia
Check Condition : Unconditional
INFO : Customer has the new value already in place - skipping
[ s_db_tnsadmin ]
Action : translate
Change reason : Resetting it to correct value
Expected value : /erpp/erppdb/9.2.0/network/admin/ERPP
Found value : /erpp/erppdb/9.2.0/network/admin/ERPP_avantasia
New value : /erpp/erppdb/9.2.0/network/admin/ERPP_avantasia
Check Condition : Unconditional
INFO : Customer has the new value already in place - skipping
[ s_db_linkctrl ]
Action : translate
Change reason : It should be unset in AutoConfig enabled RDBMS setup
Expected value : L_PTHREADS_D7
Found value :
New value :
Check Condition : Unconditional
INFO : Customer has the new value already in place - skipping
[ s_systemname ]
Action : translate
Change reason : Resetting it to correct value
Expected value : ERPP
Found value : ERPP
New value : ERPP
Check Condition : Unconditional
[ s_db_nlslang ]
Action : translate
Change reason : Resetting it to correct value
Expected value : American_America.%s_at_cset%
Found value : American_America.UTF8
New value : American_America.UTF8
Check Condition : Unconditional
INFO : Customer has the new value already in place - skipping
[ s_db_path ]
Action : translate
Change reason : Environment Variables should be updated through the context editor
Expected value : /erpp/erppdb/9.2.0/bin:/usr/bin:/usr/sbin:/erpp/erppdb/9.2.0/jre/1.4.2/bin:$PATH
Found value : /erpp/erppdb/9.2.0/bin:/usr/bin:/usr/sbin:/erpp/erppdb/9.2.0/jre/1.4.2/bin:/usr/ccs/bin:/bin:/usr/bin/X11:/usr/local/bin:$PATH
New value : /erpp/erppdb/9.2.0/bin:/usr/bin:/usr/sbin:/erpp/erppdb/9.2.0/jre/1.4.2/bin:/usr/ccs/bin:/bin:/usr/bin/X11:/usr/local/bin:$PATH
Check Condition : Unconditional
INFO : Customer has the new value already in place - skipping
[ s_db_ldlib ]
Action : translate
Change reason : Environment Variables should be updated through the context editor
Expected value : /erpp/erppdb/9.2.0/lib:/usr/X11R6/lib:/usr/openwin/lib
Found value : /erpp/erppdb/9.2.0/lib:/usr/X11R6/lib:/usr/openwin/lib:/erpp/erppdb/9.2.0/ctx/lib
New value : /erpp/erppdb/9.2.0/lib:/usr/X11R6/lib:/usr/openwin/lib:/erpp/erppdb/9.2.0/lib:/usr/dt/lib:/erpp/erppdb/9.2.0/ctx/lib
Check Condition : Unconditional
INFO : Customer specified value - skipping
===========================================================================
[ Config tool : /erpp/erppdb/9.2.0/appsutil/bin/adgentns.pl ]
Command : /erpp/erppdb/9.2.0/Apache/perl/bin/perl -I /erpp/erppdb/9.2.0/Apache/perl/lib/5.00503:/erpp/erppdb/9.2.0/Apache/perl/lib/site_perl/5.005:/erpp/erppdb/9.2.0/appsutil/perl /erpp/erppdb/9.2.0/appsutil/bin/adgentns.pl PASSWORD contextfile=/data/erpp/erppdb/9.2.0/appsutil/ERPP_avantasia.xml
Action : execute
Warning : Executable is a Symbolic link to /data/erpp/erppdb/9.2.0/appsutil/bin/adgentns.pl
SCRIPT RETURNED:
Generate Tns Names
Using java command: /erpp/erppdb/9.2.0/jre/1.4.2/bin/java
JAVA_HOME :
Java version : 1.4.2_02
Classpath : /erpp/erppdb/9.2.0/jre/1.4.2/lib/rt.jar:/erpp/erppdb/9.2.0/jdbc/lib/ojdbc14.jar:/erpp/erppdb/9.2.0/appsutil/java/xmlparserv2.zip:/erpp/erppdb/9.2.0/appsutil/java
Loading ORACLE_HOME environment from /erpp/erppdb/9.2.0
Logfile: /erpp/erppdb/9.2.0/appsutil/log/ERPP_avantasia/03280041/NetServiceHandler.log
adgentns.pl exiting with status 0
ERRORCODE = 0 ERRORCODE_END
.end std out.
.end err out.
Result : SUCCEEDED
===========================================================================
Ending Context Value Management System.
===========================================================================
===========================================================================
Uploading file system Context file and its templates to the database
Context file :
/data/erpp/erppdb/9.2.0/appsutil/ERPP_avantasia.xml
ADX Database Utility
getConnectionUsingAppsJDBCConnector() -->
APPS_JDBC_URL='null'
Trying to get connection using SID based connect descriptor
getConnection() -->
sDbHost : avantasia
sDbDomain : angra.com
sDbPort : 1521
sDbSid : ERPP
sDbUser : APPS
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@avantasia.angra.com:1521:ERPP
Connection obtained
-------------------ADX Database Utility Finished---------------
Result : Successfully uploaded the Context file to the DataBase
Context template file :
/erpp/erppdb/9.2.0/appsutil/template/adxdbctx.tmp
ADX Database Utility
getConnectionUsingAppsJDBCConnector() -->
APPS_JDBC_URL='null'
Trying to get connection using SID based connect descriptor
getConnection() -->
sDbHost : avantasia
sDbDomain : angra.com
sDbPort : 1521
sDbSid : ERPP
sDbUser : APPS
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@avantasia.angra.com:1521:ERPP
Connection obtained
-------------------ADX Database Utility Finished---------------
Result : Successfully uploaded the Context template file to the DataBase
Uploading the Context information template to the DataBase
Context information template :
/erpp/erppdb/9.2.0/appsutil/template/adxdbinf.tmp
ADX Database Utility
getConnectionUsingAppsJDBCConnector() -->
APPS_JDBC_URL='null'
Trying to get connection using SID based connect descriptor
getConnection() -->
sDbHost : avantasia
sDbDomain : angra.com
sDbPort : 1521
sDbSid : ERPP
sDbUser : APPS
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@avantasia.angra.com:1521:ERPP
Connection obtained
-------------------ADX Database Utility Finished---------------
Result : Successfully uploaded the Context information template file to the DataBase
===========================================================================
Updating rdbms version in Context file to db920
Updating rdbms type in Context file to 32 bits
Configuring templates from ORACLE_HOME ...
Processing DriverFile = /erpp/erppdb/9.2.0/appsutil/template/addbtmpl.drv
AutoConfig Profile Phase
Running Instantiation Drivers for AppsUtil
instantiate file:
source : /erpp/erppdb/9.2.0/appsutil/template/adlicnse.sql
dest : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/adlicnse.sql
backup : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/adlicnse.sql to /erpp/erppdb/9.2.0/appsutil/out/ERPP_avantasia/03280042/adlicnse.sql
setting permissions: 600
setting ownership: applerpp:dba
File /erpp/erppdb/9.2.0/network/admin/ERPP_avantasia/listener.ora of type INSTALL already exists, this file will not be instantiated.
File /erpp/erppdb/9.2.0/network/admin/ERPP_avantasia/tnsnames.ora of type INSTALL already exists, this file will not be instantiated.
instantiate file:
source : /erpp/erppdb/9.2.0/appsutil/template/adstopdb.sql
dest : /erpp/erppdb/9.2.0/appsutil/scripts/ERPP_avantasia/adstopdb.sql
backup : /erpp/erppdb/9.2.0/appsutil/scripts/ERPP_avantasia/adstopdb.sql to /erpp/erppdb/9.2.0/appsutil/out/ERPP_avantasia/03280042/adstopdb.sql
setting permissions: 600
setting ownership: applerpp:dba
instantiate file:
source : /erpp/erppdb/9.2.0/appsutil/template/adstrtdb.sql
dest : /erpp/erppdb/9.2.0/appsutil/scripts/ERPP_avantasia/adstrtdb.sql
backup : /erpp/erppdb/9.2.0/appsutil/scripts/ERPP_avantasia/adstrtdb.sql to /erpp/erppdb/9.2.0/appsutil/out/ERPP_avantasia/03280042/adstrtdb.sql
setting permissions: 600
setting ownership: applerpp:dba
instantiate file:
source : /erpp/erppdb/9.2.0/appsutil/template/addbccnv.sql
dest : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/addbccnv.sql
backup : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/addbccnv.sql to /erpp/erppdb/9.2.0/appsutil/out/ERPP_avantasia/03280042/addbccnv.sql
setting permissions: 600
setting ownership: applerpp:dba
instantiate file:
source : /erpp/erppdb/9.2.0/appsutil/template/adclobconv.sql
dest : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/adclobconv.sql
backup : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/adclobconv.sql to /erpp/erppdb/9.2.0/appsutil/out/ERPP_avantasia/03280042/adclobconv.sql
setting permissions: 600
setting ownership: applerpp:dba
instantiate file:
source : /erpp/erppdb/9.2.0/appsutil/template/adclobtmp.sql
dest : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/adclobtmp.sql
backup : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/adclobtmp.sql to /erpp/erppdb/9.2.0/appsutil/out/ERPP_avantasia/03280042/adclobtmp.sql
setting permissions: 600
setting ownership: applerpp:dba
instantiate file:
source : /erpp/erppdb/9.2.0/appsutil/template/adpreclone.pl
dest : /erpp/erppdb/9.2.0/appsutil/scripts/ERPP_avantasia/adpreclone.pl
backup : /erpp/erppdb/9.2.0/appsutil/scripts/ERPP_avantasia/adpreclone.pl to /erpp/erppdb/9.2.0/appsutil/out/ERPP_avantasia/03280042/adpreclone.pl
setting permissions: 700
setting ownership: applerpp:dba
instantiate file:
source : /erpp/erppdb/9.2.0/appsutil/template/adcrobj.sql
dest : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/adcrobj.sql
backup : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/adcrobj.sql to /erpp/erppdb/9.2.0/appsutil/out/ERPP_avantasia/03280042/adcrobj.sql
setting permissions: 700
setting ownership: applerpp:dba
instantiate file:
source : /erpp/erppdb/9.2.0/appsutil/template/adchknls.pl
dest : /erpp/erppdb/9.2.0/appsutil/scripts/ERPP_avantasia/adchknls.pl
backup : /erpp/erppdb/9.2.0/appsutil/scripts/ERPP_avantasia/adchknls.pl to /erpp/erppdb/9.2.0/appsutil/out/ERPP_avantasia/03280042/adchknls.pl
setting permissions: 700
setting ownership: applerpp:dba
instantiate file:
source : /erpp/erppdb/9.2.0/appsutil/template/ad8idbux.env
dest : /erpp/erppdb/9.2.0/ERPP_avantasia.env
backup : /erpp/erppdb/9.2.0/ERPP_avantasia.env to /erpp/erppdb/9.2.0/appsutil/out/ERPP_avantasia/03280042/ERPP_avantasia.env
setting permissions: 644
setting ownership: applerpp:dba
instantiate file:
source : /erpp/erppdb/9.2.0/appsutil/template/adupdlib_ux.sql
dest : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/adupdlib.sql
backup : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/adupdlib.sql to /erpp/erppdb/9.2.0/appsutil/out/ERPP_avantasia/03280042/adupdlib.sql
setting permissions: 600
setting ownership: applerpp:dba
instantiate file:
source : /erpp/erppdb/9.2.0/appsutil/template/adcrdb.sh
dest : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/adcrdb.sh
backup : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/adcrdb.sh to /erpp/erppdb/9.2.0/appsutil/out/ERPP_avantasia/03280042/adcrdb.sh
setting permissions: 700
setting ownership: applerpp:dba
instantiate file:
source : /erpp/erppdb/9.2.0/appsutil/template/adsvdb.sh
dest : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/adsvdb.sh
backup : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/adsvdb.sh to /erpp/erppdb/9.2.0/appsutil/out/ERPP_avantasia/03280042/adsvdb.sh
setting permissions: 700
setting ownership: applerpp:dba
instantiate file:
source : /erpp/erppdb/9.2.0/appsutil/template/adsvdlsn.sh
dest : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/adsvdlsn.sh
backup : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/adsvdlsn.sh to /erpp/erppdb/9.2.0/appsutil/out/ERPP_avantasia/03280042/adsvdlsn.sh
setting permissions: 700
setting ownership: applerpp:dba
instantiate file:
source : /erpp/erppdb/9.2.0/appsutil/template/adsvdcnv.sh
dest : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/adsvdcnv.sh
backup : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/adsvdcnv.sh to /erpp/erppdb/9.2.0/appsutil/out/ERPP_avantasia/03280042/adsvdcnv.sh
setting permissions: 700
setting ownership: applerpp:dba
instantiate file:
source : /erpp/erppdb/9.2.0/appsutil/template/addbprf.sh
dest : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/addbprf.sh
backup : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/addbprf.sh to /erpp/erppdb/9.2.0/appsutil/out/ERPP_avantasia/03280042/addbprf.sh
setting permissions: 700
setting ownership: applerpp:dba
instantiate file:
source : /erpp/erppdb/9.2.0/appsutil/template/addbprf.sql
dest : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/addbprf.sql
backup : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/addbprf.sql to /erpp/erppdb/9.2.0/appsutil/out/ERPP_avantasia/03280042/addbprf.sql
setting permissions: 600
setting ownership: applerpp:dba
instantiate file:
source : /erpp/erppdb/9.2.0/appsutil/template/addbupdgsm.sql
dest : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/addbupdgsm.sql
backup : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/addbupdgsm.sql to /erpp/erppdb/9.2.0/appsutil/out/ERPP_avantasia/03280042/addbupdgsm.sql
setting permissions: 600
setting ownership: applerpp:dba
instantiate file:
source : /erpp/erppdb/9.2.0/appsutil/template/afdbprf.sh
dest : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/afdbprf.sh
backup : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/afdbprf.sh to /erpp/erppdb/9.2.0/appsutil/out/ERPP_avantasia/03280042/afdbprf.sh
setting permissions: 700
setting ownership: applerpp:dba
instantiate file:
source : /erpp/erppdb/9.2.0/appsutil/template/afdbprf.sql
dest : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/afdbprf.sql
backup : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/afdbprf.sql to /erpp/erppdb/9.2.0/appsutil/out/ERPP_avantasia/03280042/afdbprf.sql
setting permissions: 600
setting ownership: applerpp:dba
instantiate file:
source : /erpp/erppdb/9.2.0/appsutil/template/addbctl.sh
dest : /erpp/erppdb/9.2.0/appsutil/scripts/ERPP_avantasia/addbctl.sh
backup : /erpp/erppdb/9.2.0/appsutil/scripts/ERPP_avantasia/addbctl.sh to /erpp/erppdb/9.2.0/appsutil/out/ERPP_avantasia/03280042/addbctl.sh
setting permissions: 700
setting ownership: applerpp:dba
instantiate file:
source : /erpp/erppdb/9.2.0/appsutil/template/addlnctl.sh
dest : /erpp/erppdb/9.2.0/appsutil/scripts/ERPP_avantasia/addlnctl.sh
backup : /erpp/erppdb/9.2.0/appsutil/scripts/ERPP_avantasia/addlnctl.sh to /erpp/erppdb/9.2.0/appsutil/out/ERPP_avantasia/03280042/addlnctl.sh
setting permissions: 700
setting ownership: applerpp:dba
instantiate file:
source : /erpp/erppdb/9.2.0/appsutil/template/adlsnodes_ux.sh
dest : /erpp/erppdb/9.2.0/appsutil/scripts/ERPP_avantasia/adlsnodes.sh
backup : /erpp/erppdb/9.2.0/appsutil/scripts/ERPP_avantasia/adlsnodes.sh to /erpp/erppdb/9.2.0/appsutil/out/ERPP_avantasia/03280042/adlsnodes.sh
setting permissions: 700
setting ownership: applerpp:dba
instantiate file:
source : /erpp/erppdb/9.2.0/appsutil/template/adlnkoh.sh
dest : /erpp/erppdb/9.2.0/appsutil/install/adlnkoh.sh
backup : /erpp/erppdb/9.2.0/appsutil/install/adlnkoh.sh to /erpp/erppdb/9.2.0/appsutil/out/ERPP_avantasia/03280042/adlnkoh.sh
setting permissions: 700
setting ownership: applerpp:dba
instantiate file:
source : /erpp/erppdb/9.2.0/appsutil/template/adcrdbrdlg.sh
dest : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/adcrdbrdlg.sh
backup : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/adcrdbrdlg.sh to /erpp/erppdb/9.2.0/appsutil/out/ERPP_avantasia/03280042/adcrdbrdlg.sh
setting permissions: 700
setting ownership: applerpp:dba
instantiate file:
source : /erpp/erppdb/9.2.0/appsutil/template/adautocfg_ux.sh
dest : /erpp/erppdb/9.2.0/appsutil/scripts/ERPP_avantasia/adautocfg.sh
backup : /erpp/erppdb/9.2.0/appsutil/scripts/ERPP_avantasia/adautocfg.sh to /erpp/erppdb/9.2.0/appsutil/out/ERPP_avantasia/03280042/adautocfg.sh
setting permissions: 700
setting ownership: applerpp:dba
instantiate file:
source : /erpp/erppdb/9.2.0/appsutil/template/adcrobj.sh
dest : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/adcrobj.sh
backup : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/adcrobj.sh to /erpp/erppdb/9.2.0/appsutil/out/ERPP_avantasia/03280042/adcrobj.sh
setting permissions: 700
setting ownership: applerpp:dba
File /erpp/erppdb/9.2.0/dbs/initERPP.ora of type INSTALL already exists, this file will not be instantiated.
instantiate file:
source : /erpp/erppdb/9.2.0/appsutil/template/afmkinit.sh
dest : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/afmkinit.sh
backup : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/afmkinit.sh to /erpp/erppdb/9.2.0/appsutil/out/ERPP_avantasia/03280042/afmkinit.sh
setting permissions: 700
setting ownership: applerpp:dba
instantiate file:
source : /erpp/erppdb/9.2.0/appsutil/template/config_ux.c
dest : /erpp/erppdb/9.2.0/rdbms/lib/config.c
backup : /erpp/erppdb/9.2.0/rdbms/lib/config.c to /erpp/erppdb/9.2.0/appsutil/out/ERPP_avantasia/03280042/config.c
setting ownership: applerpp:dba
instantiate file:
source : /erpp/erppdb/9.2.0/appsutil/template/adcmclean.sql
dest : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/adcmclean.sql
backup : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/adcmclean.sql to /erpp/erppdb/9.2.0/appsutil/out/ERPP_avantasia/03280042/adcmclean.sql
setting permissions: 600
setting ownership: applerpp:dba
instantiate file:
source : /erpp/erppdb/9.2.0/appsutil/template/adcctclean.sql
dest : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/adcctclean.sql
backup : /erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/adcctclean.sql to /erpp/erppdb/9.2.0/appsutil/out/ERPP_avantasia/03280042/adcctclean.sql
setting permissions: 600
setting ownership: applerpp:dba
AutoConfig Setup Phase
Running Setup Process 1 of 2 for AppsUtil
Executing script in InstantiateFile:
/erpp/erppdb/9.2.0/Apache/perl/bin/perl -I /erpp/erppdb/9.2.0/Apache/perl/lib/5.00503:/erpp/erppdb/9.2.0/Apache/perl/lib/site_perl/5.005:/erpp/erppdb/9.2.0/appsutil/perl /erpp/erppdb/9.2.0/appsutil/scripts/ERPP_avantasia/adchknls.pl
script returned:
Validating information needed for NLS........
DATABASE version : db920
No NLS specific checks required
ERRORCODE = 0 ERRORCODE_END
.end std out.
.end err out.
AutoConfig Setup Phase
Running Setup Process 2 of 2 for AppsUtil
Executing script in InstantiateFile:
/erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/afmkinit.sh
script returned:
afmkinit.sh started at vie mar 28 00:42:22 ART 2008
The environment settings are as follows ...
ORACLE_HOME : /erpp/erppdb/9.2.0
ORACLE_SID : ERPP
TWO_TASK :
PATH : /erpp/erppdb/9.2.0/Apache/perl/bin:/erpp/erppdb/9.2.0/bin:/usr/bin:/usr/sbin:/erpp/erppdb/9.2.0/jre/1.4.2/bin:/usr/ccs/bin:/bin:/usr/bin/X11:/usr/local/bin:/erpp/erppdb/9.2.0/Apache/perl/bin:/erpp/erppdb/9.2.0/Apache/perl/bin:/erpp/erppdb/9.2.0/bin:/usr/bin:/usr/sbin:/erpp/erppdb/9.2.0/jre/1.4.2/bin:/usr/ccs/bin:/bin:/usr/bin/X11:/usr/local/bin:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/usr/X11R6/bin:/erpp/homes/oraerpp/bin:/erpp:/erpp/scripts:/sbin:/erpp/erppdb/9.2.0/OPatch
LD_LIBRARY_PATH : /erpp/erppdb/9.2.0/lib:/usr/X11R6/lib:/usr/openwin/lib:/erpp/erppdb/9.2.0/ctx/lib
afmkinit.sh exiting with status 0
.end std out.
.end err out.
AutoConfig Profile Phase
Running Profile Process 1 of 1 for AppsUtil
Executing script in InstantiateFile:
/erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/afdbprf.sh
script returned:
afdbprf.sh started at vie mar 28 00:42:22 ART 2008
The environment settings are as follows ...
ORACLE_HOME : /erpp/erppdb/9.2.0
ORACLE_SID : ERPP
PATH : /erpp/erppdb/9.2.0/Apache/perl/bin:/erpp/erppdb/9.2.0/bin:/usr/bin:/usr/sbin:/erpp/erppdb/9.2.0/jre/1.4.2/bin:/usr/ccs/bin:/bin:/usr/bin/X11:/usr/local/bin:/erpp/erppdb/9.2.0/Apache/perl/bin:/erpp/erppdb/9.2.0/Apache/perl/bin:/erpp/erppdb/9.2.0/bin:/usr/bin:/usr/sbin:/erpp/erppdb/9.2.0/jre/1.4.2/bin:/usr/ccs/bin:/bin:/usr/bin/X11:/usr/local/bin:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/usr/X11R6/bin:/erpp/homes/oraerpp/bin:/erpp:/erpp/scripts:/sbin:/erpp/erppdb/9.2.0/OPatch
LD_LIBRARY_PATH : /erpp/erppdb/9.2.0/lib:/usr/X11R6/lib:/usr/openwin/lib:/erpp/erppdb/9.2.0/ctx/lib
Executable : /erpp/erppdb/9.2.0/bin/sqlplus
SQL*Plus: Release 9.2.0.5.0 - Production on Fri Mar 28 00:42:22 2008
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected.
Updated profile option value - 1 row(s) updated
Application Id : 0
Profile Name : FND_DB_WALLET_DIR
Level Id : 10001
New Value : /erpp/erppdb/9.2.0/appsutil/wallet
Old Value : /erpp/erppdb/9.2.0/appsutil/wallet
Updated profile option value - 1 row(s) updated
Application Id : 174
Profile Name : ECX_UTL_XSLT_DIR
Level Id : 10001
New Value : /usr/tmp
Old Value : /usr/tmp
Updated profile option value - 1 row(s) updated
Application Id : 174
Profile Name : ECX_UTL_LOG_DIR
Level Id : 10001
New Value : /usr/tmp
Old Value : /usr/tmp
PL/SQL procedure successfully completed.
Commit complete.
Disconnected from Oracle9i Enterprise Edition Release 9.2.0.5.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.5.0 - Production
ERRORCODE = 0 ERRORCODE_END
.end std out.
.end err out.
AutoConfig Services Phase
Running Service Process 1 of 1 for AppsUtil
Executing script in InstantiateFile:
/erpp/erppdb/9.2.0/appsutil/install/ERPP_avantasia/adcrobj.sh
script returned:
adcrobj.sh started at vie mar 28 00:42:23 ART 2008
Parameters passed are : APPS apps
The environment settings are as follows ...
ORACLE_HOME : /erpp/erppdb/9.2.0
ORACLE_SID : ERPP
TWO_TASK :
PATH : /erpp/erppdb/9.2.0/Apache/perl/bin:/erpp/erppdb/9.2.0/bin:/usr/bin:/usr/sbin:/erpp/erppdb/9.2.0/jre/1.4.2/bin:/usr/ccs/bin:/bin:/usr/bin/X11:/usr/local/bin:/erpp/erppdb/9.2.0/Apache/perl/bin:/erpp/erppdb/9.2.0/Apache/perl/bin:/erpp/erppdb/9.2.0/bin:/usr/bin:/usr/sbin:/erpp/erppdb/9.2.0/jre/1.4.2/bin:/usr/ccs/bin:/bin:/usr/bin/X11:/usr/local/bin:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/usr/X11R6/bin:/erpp/homes/oraerpp/bin:/erpp:/erpp/scripts:/sbin:/erpp/erppdb/9.2.0/OPatch
LD_LIBRARY_PATH : /erpp/erppdb/9.2.0/lib:/usr/X11R6/lib:/usr/openwin/lib:/erpp/erppdb/9.2.0/ctx/lib
SQLPLUS Executable : /erpp/erppdb/9.2.0/bin/sqlplus
SQL*Plus: Release 9.2.0.5.0 - Production on Fri Mar 28 00:42:23 2008
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected.
PL/SQL procedure successfully completed.
Commit complete.
Disconnected from Oracle9i Enterprise Edition Release 9.2.0.5.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.5.0 - Production
adcrobj.sh exiting with status 0
ERRORCODE = 0 ERRORCODE_END
.end std out.
.end err out.
AutoConfig is exiting with status 0
The log file for this session is located at: /erpp/erppdb/9.2.0/appsutil/log/ERPP_avantasia/03280041/adconfig.log
2) netservicehandler
Using java command: /erpp/erppdb/9.2.0/jre/1.4.2/bin/java
JAVA_HOME :
Java version : 1.4.2_02
Classpath : /erpp/erppdb/9.2.0/jre/1.4.2/lib/rt.jar:/erpp/erppdb/9.2.0/jdbc/lib/ojdbc14.jar:/erpp/erppdb/9.2.0/appsutil/java/xmlparserv2.zip:/erpp/erppdb/9.2.0/appsutil/java
===============================================================================
NetServiceHandler 115.38.11586.2 started for avantasia at Fri Mar 28 00:41:23 GMT-03:00 2008
===============================================================================
[ Context Information ]
Host : avantasia
Domain : angra.com
Out Dir : /erpp/erppdb/9.2.0/appsutil/out/ERPP_avantasia/03280041
Tier Type : DATABASE TIER
Getting connection...
ADX Database Utility
getConnectionUsingAppsJDBCConnector() -->
APPS_JDBC_URL='null'
Trying to get connection using SID based connect descriptor
getConnection() -->
sDbHost : avantasia
sDbDomain : angra.com
sDbPort : 1521
sDbSid : ERPP
sDbUser : APPS
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@avantasia.angra.com:1521:ERPP
Exception occurred: java.sql.SQLException: Excepción de E/S: The Network Adapter could not establish the connection
Trying to connect using SID as ServiceName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=avantasia.angra.com)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=ERPP)))
Exception occurred: java.sql.SQLException: Excepción de E/S: The Network Adapter could not establish the connection
Trying to connect using SID as ServiceName.DomainName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=avantasia.angra.com)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=ERPP.angra.com)))
Exception occurred: java.sql.SQLException: Excepción de E/S: The Network Adapter could not establish the connection
Connection could not be obtained; returning null
-------------------ADX Database Utility Finished---------------
Could not get connection to the database.
Exiting with status 100 to instantiate the tnsnames.ora template
Creation of Directory - /data/erpp/erppdb/9.2.0/network/admin/ERPP_avantasia Succeeded.
instantiate file:
source : /erpp/erppdb/9.2.0/appsutil/template/ad8itns.ora
dest : /erpp/erppdb/9.2.0/network/admin/ERPP_avantasia/tnsnames.ora
AutoConfig is exiting with status 0
instantiate file:
source : /erpp/erppdb/9.2.0/appsutil/template/ad8ilsnr.ora
dest : /erpp/erppdb/9.2.0/network/admin/ERPP_avantasia/listener.ora
AutoConfig is exiting with status 0
adgentns.pl exiting with status 0
ERRORCODE = 0 ERRORCODE_END
Using java command: /erpp/erppdb/9.2.0/jre/1.4.2/bin/java
JAVA_HOME :
Java version : 1.4.2_02
Classpath : /erpp/erppdb/9.2.0/jre/1.4.2/lib/rt.jar:/erpp/erppdb/9.2.0/jdbc/lib/ojdbc14.jar:/erpp/erppdb/9.2.0/appsutil/java/xmlparserv2.zip:/erpp/erppdb/9.2.0/appsutil/java
===============================================================================
NetServiceHandler 115.38.11586.2 started for avantasia at Fri Mar 28 00:41:56 GMT-03:00 2008
===============================================================================
[ Context Information ]
Host : avantasia
Domain : angra.com
Out Dir : /erpp/erppdb/9.2.0/appsutil/out/ERPP_avantasia/03280041
Tier Type : DATABASE TIER
Getting connection...
ADX Database Utility
getConnectionUsingAppsJDBCConnector() -->
APPS_JDBC_URL='null'
Trying to get connection using SID based connect descriptor
getConnection() -->
sDbHost : avantasia
sDbDomain : angra.com
sDbPort : 1521
sDbSid : ERPP
sDbUser : APPS
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@avantasia.angra.com:1521:ERPP
Connection obtained
-------------------ADX Database Utility Finished---------------
Connection obtained
NODE_ID Column Availability: true
FND_NODES Snap Shot:
Updating null NODE_IDs
No of rows updated: 0
FND_NODES Snap Shot:
Processing listener.ora
LISTENER ADMIN RESTRICTIONS = OFF
LISTENER PASSWORD ENABLE/DISABLE SWITCH = O -
(Re)activate Intel Rapid start technolgy (RST) & RAID @U310
Dear community,
I have been frustrated about this for long time. Got U310 with win8(24GB SSD+500GB HDD).
People says I should set RAID in BIOS. But I got only error and cannot do recovery. So I set back to ACHI mode and system restored. Then error: "Your system does not apear to have Intel Rapid Start technology enabled".
- Yes, I have tried to set BIOS ACHI to RAID, no start.
- SSD 24GB is in device manager, not paritioned.
- intel RAID software installed
- So the point is: I have to activate in BIOS ACHI to RAID, but then Pc will not start.
So whats is the problem?
Now the partitions looks as this:
Could anyone help me, how to reactivate the RAID/ fast caching technolgy of RST?
Another frustration is: how to backup my system(win8) to USB media, so that I could restore factory state?
appreciate any advices, thanks in advance!
Signature on work
Solved!
Go to Solution.Hi, bradlutz1
thanks for your reply! How do you identify it is defective? You have now a RAID enabled U310 or U410?
My SSD HD can be manually partitioned and use as a normal R/W HDD. Just it cannot set to RAID I think, which should be set to before install windows 8. checking into BIOS, the Intel Rapid Storage technolgy (iRST) is enabled. But I still have problem( see screenshot): How does it look like for yours?
On the other side, I use windows 8 recovery programm created a USB drive as recovery media. I want to use it to reset /recovery my PC to factory default with RAID eanbale.
First I set BOIS to RAID. Boot from HDD, but still failed, it says (I think AHCI could go thru):
Seeing from the partition picture in my first post, I think the last 20G partition is Lenovo recovery, but how to backup it and restore?
Very annoying also, the Lenovo program OneKey Recovery program 8.0(for win8) gives no option to create factory DVD/USB media, while its ver. 7 did:
http://support.lenovo.com/en_US/research/hints-or-tips/detail.page?DocID=HT051300
http://support.lenovo.com/en_US/diagnose-and-fix/detail.page?DocID=HT071791
BTW: my PC starts within 30s to login screen (w/o iRST), is it OK?
Signature on work
Maybe you are looking for
-
HELP NEEDED WITH ADDAPTER-DVI TO VGA.
PLEASE ...HELP NEEDED WITH WIRING CROSS OVER....CAN YOU HELP WITH BACK OF PLUG CONNECTIONS...I SORTA UNDERSTAND THE PINOUTS BUT CANT MAKE AN EXACT MACH...WOULD LIKE TO BE 100% SURE... ......THIS ENSURES NO SMOKE!!!
-
Problem in testing the Webservice interface?
Hello All, I created and deployed one webservice in the Xi system and SAP communication done using the RFC. same like below link. http://www.riyaz.net/blog/xipi-consuming-xi-web-services-using-web-dynpro-part-i/technology/sap/6/ but now problem is th
-
Create database base on another database .but. without data
Hi : I have a database DB1, I want to create another database DB2 having all the tables of DB1 but with NO data. All tables should be blank. I have around 80 tables in DB1, can you please suggest me a way do this. Thanks
-
Emergency Numbers - suggestion for iPhone engineers
I can't find a forum to make suggestions for iPhone improvements - this seems the best choice - hopefully Apple engineers browse this too. When the iPhone is locked and password protection is on (required by some companies who allow corporate mail to
-
Plugin for eclipse for using log4j in jsp ?
Hello all, Plz tell me is there any plugin (eclipse) for using log4j in jsp pages similar to log4e. As log4e is not working with jsp in Myeclipse Thanx