How to reinstall Router WRT160N
I tried to reinstalled the softwear to set a new password in my computer because I don't remember the password for the wireless (for my wife's computer) but it ask me to do the default username & password. I don't know where and how to do it?
If you forget pre-shared key to connect to wireless network, then you can log in to wireless router's configuration page to reset it again. If you also forget the username/password to log in to wireless router's configuration page, then you can press the reset button for 30-60seconds, after that use following info to login and reconfigure your wireless router.
default username: (leave it blank) password:admin
If still not sure how to connect to your router and configure it, then have a look on this wireless setup and then configure wireless router.
Similar Messages
-
How to reinstall pre-installed iWorks after hard drive replaced?
iWork was pre-installed on my iMac (July 2010) 3.2 gHz i3 running OS10.6.8. The original hard drive was recalled by Apple and replaced. I backed up all data to Crash Plan prior to the change out. When I tried to open any of the iWorks programs I received the following error message:
I checked my install discs and application install discs, but iWork does not show up there. How can reinstall these programs?Thanks, mate, but the computer did not come with any iWork DVD. It only had the OS install disc and the Application restore disc, neither of which contain iWork. The error message reads: "Pages cannot be opened because of a problem. Check with the developer to make sure Pages works with this version of Mac OS X. You may need to reinstall the application. Be sure to install any available updates for the application and Mac OS X. Clic Report to see more detailed information and send a report to Apple."
I sent a report to Apple. This message repeats for Pages, Numbers, and Keynote. My original receipt shows the iWork app was paid for. -
How to re-route source & gate for Buffered Period in DAmx
I am trying to write a DAQmx program that does the follow :
(1) creates 1 PulseTrain task; this task routes is output to a requested pin with will be used as a SOURCE for a Buffered Period task.
(2) if requested creates a second PulseTrain who's output will be used as the Buffered Period GATE.
(3) the Buffered period task needs to assign ANY SOURCE,GATE and run till its stopped by the user.
Note that this task needs to "sample/read" its data and show it to the user.
My questions are :
(a) is the PulseTrain "output" re-route done OK ?
(b) how to re-route the Period source/gate - I used DAQmxSetChanAttribute, but I an not sure it is right
©) how to make the Period task write the data into "my program buffer" so I do not have to read it when "stop" is pressed.
I try to run with simulated devices on a P4 3.2GHZ running XP :
First TrainPulse - ctr0, out->RSTI0
Second TrainPulse - ctr1, out->RSTI1
Period - ctr2, source=RSTI1, gate=RSTI0
Running this program with a SIMULATED device - OK (data = 0). with the real device - I get error -200141
I included my code.
Attachments:
DaQmx test.zip 147 KBI have a new question
I need to create an event buffered task when the source=80mhz internal card timebase, gate=source of other counter (e.q for counter 1 use 0, for 3 use 2)
I know that with Traditional-DAQ it will look like )see attch file):
Now the convertion to DAQmx :
++++++++++++++++++++++++++++++
void SetupEvent(void)
if ( Internal.P6602_ID == -1 ) return;
sprintf(Chan,"Dev%d/ctr1",Internal.P6602_ID); // channel 1
DAQmxErrChk (DAQmxCreateTask("EventChan1",&DaqmxTasks.PCI_6602[1]));
DAQmxErrChk (DAQmxCreateCICountEdgesChan(DaqmxTasks.PCI_6602[1],Chan,"EventChan1",DAQmx_Val_Rising,0,
DAQmx_Val_CountUp));
DAQmxErrChk (DAQmxSetTimingAttribute (DaqmxTasks.PCI_6602[1], DAQmx_SampTimingType, DAQmx_Val_SampClk) );
DAQmxErrChk (DAQmxSetTimingAttribute (DaqmxTasks.PCI_6602[1], DAQmx_SampQuant_SampMode,DAQmx_Val_ContSamps) );
DAQmxErrChk(DAQmxSetTimingAttribute (DaqmxTasks.PCI_6602[1],DAQmx_SampQuant_SampPerChan, BUF_MAX));
// set source
DAQmxErrChk (DAQmxSetTimingAttribute (DaqmxTasks.PCI_6602[1], DAQmx_SampClk_Src, "/Dev1/80MHzTimebase"));
// and gate
sprintf(msg,"/Dev%d/ctr0Source",Internal.P6602_ID);
DAQmxErrChk(DAQmxSetChanAttribute (DaqmxTasks.PCI_6602[1], Chan, DAQmx_CI_CountEdges_Term, msg,0));
sprintf(Chan,"Dev%d/ctr3",Internal.P6602_ID); // channel 3
DAQmxErrChk (DAQmxCreateTask("EventChan3",&DaqmxTasks.PCI_6602[3]));
DAQmxErrChk (DAQmxCreateCICountEdgesChan(DaqmxTasks.PCI_6602[3],Chan,"EventChan3",DAQmx_Val_Rising,0,
DAQmx_Val_CountUp));
DAQmxErrChk (DAQmxSetTimingAttribute (DaqmxTasks.PCI_6602[3], DAQmx_SampTimingType, DAQmx_Val_SampClk) );
DAQmxErrChk (DAQmxSetTimingAttribute (DaqmxTasks.PCI_6602[3], DAQmx_SampQuant_SampMode,DAQmx_Val_ContSamps) );
DAQmxErrChk(DAQmxSetTimingAttribute (DaqmxTasks.PCI_6602[3],DAQmx_SampQuant_SampPerChan, BUF_MAX));
DAQmxErrChk (DAQmxSetTimingAttribute (DaqmxTasks.PCI_6602[1], DAQmx_SampClk_Src, "/Dev1/80MHzTimebase"));
sprintf(msg,"/Dev%d/ctr2Source",Internal.P6602_ID);
DAQmxErrChk(DAQmxSetChanAttribute (DaqmxTasks.PCI_6602[3], Chan, DAQmx_CI_CountEdges_Term, msg,0));
return;
Error:
Internal.StartStop = OFF;
if ( DAQmxFailed(error) ) DAQmxGetExtendedErrorInfo(errBuff,1024);
StopCallBack();
MessagePopup ("SetupEvent Error", errBuff);
return;
I am not sure this is the way to do it .
Can samebody help ?
Thanks, Galia
Attachments:
AutoScannerDAQCards.c 20 KB -
How to reinstall my OS on macbook pro?
how to reinstall my OS on macbook pro?
there is no DVD attached with my purchase, and if I just download one from APP store, I have to pay and the ilife 11 suite will not be incleded, what should i do?filmpower wrote:
How to reinstall my OS on macbook pro?
If you have a software problem, read this.
..Step by Step to fix your Mac
If you need to erase and install read this
How to reinstall just OS X or erase/install OS X
To restore your free or paid for iLife, read this
Restoring your Free iLife (iPhoto, iMovie etc) -
How to reinstall PDF Printer in Print & Scan window on OSX 10.8.2
Hello,
I was having issues where PDF's were not saving when I was printing them, so I thought that if I deleted the PDF printer from my list of printers and reinstalled it, my problem would be solved. Now I can't figure out how to reinstall (add) the PDF printer back into this window. I have uninstalled and reinstalled Acrobat, and I have been searching the web for about an hour.
I am running OSX 10.8.2
I have Adobe Creative Cloud installed
I am on an iMac 3.4 Ghz Intel Core i7
32 GB of RAM
Thanks for any help you have.
JMoving this discussion to the Creating, Editing, & Exporting PDFs forum.
-
How to reinstall windows 8 on bootcamp
how to reinstall windows 8 on bootcamp macbook pro, without losing anything on OS (Apple) side
Start Bootcamp Assistant then select the option to remove Windows and return your drive to a single partition. Once Windows is removed start Bootcamp Assistant again and select the option to install Windows. Follow the Bootcamp instructions for installing Windows.
This process will not cause lose of OSx data or applications if done correctly. But as allways, create a good backup of your data because things sometimes go wrong or instructions are not followed causing data lose. -
My hard drive crashed and I restored my computer with my daughter's hard drive (her battery was dead) and I want to install my personal itunes on the new hard drive. I was unable to deauthorize the original computer and I do not know how to reinstall my personal itunes. Can someone help me with this?
Thank you.Without a backup of your "crashed" HD you will have to download your iTunes purchases again. Make sure your restored computer is running the latest version of iTunes.
Here is the procedure for your reference.
On your restored computer, launch iTunes. Click on iTunes Store on the left
On the right you will see this
"Sign in" using the Apple ID used to purchase your songs, then click on "Purchased" (with the orange blob)
On the summary page that appears select the tab "Not on This Computer" on the right.
On the list that appears, select what you want and then click the "Download" button.
When you want to play your newly downloaded music, you will have to "authorize" it. Don't worry about the lost HD until enough of your computers crash that you reach the limit of 5. Then you can "deauthorize all" and re-authorize as necessary.
Downloading past purchases from the App Store, iBookstore, and iTunes Store
http://support.apple.com/kb/HT2519 -
by mistake i erase my macbook pro hard disk how to reinstall the yosemite on my macbook because it donsnt read the bootable drive?
usamafrombeverly hills wrote:
when i start the macbook & press cmd+R it goes to the internet recovery
Well then when you erased your hard drive, your erased the Recovery partition, also.
Use Internet Recovery to either restore from your Time Machine backup or reinstall the OS if you don't have a TM Backup.
It will install the OS that shipped on that Mac. You can then upgrade via the App Store. -
How to reinstall a hard drive on a mac pro that was accidentally dragged out of Finder
How to reinstall a hard drive on a mac pro that was accidentally dragged out of Finder? I have files on this drive that I don't want to loose or corrupt.
If you mean you dragged the hard drive shortcut out of the sidebar of a Finder window, you're quite all right - that's just a shortcut and you haven't lost any files. You can get it back by going to Finder preferences (the Finder menu, then Preferences), click Sidebar, and tick the "hard drives" box fully to show all hard drives.
Post back if you did something different though.
Matt -
How to reinstall Windows 8 on Yoga 13 with damaged Recovery Image?
I changed the partitions on my Yoga 13. Now it is not possible to refresh, reinstall or perform an advance start-up, as it looks like there is no recovery image anymore. The systems is currently very messy and needs a reinstall.
Can someone tell me how to reinstall Windows 8 on the Yoga 13 when the recovery image is lost or damaged?hi Chevex,
Thanks for using Lenovo Community Forums!
In the event that the Recovery partition is not working the only option is to use the Recovery CD that you can create when you first got the computer.
but if you were not able to create a Recovery CD and the Onekey Recovery is not working.
You can get the Recovery CD from the Software Department (Fees may apply to the discs)
you can contact the Hardware Team again and ask to be transferred to Software team for purchasing RCD
Lenovo Technical Support (US)
IDEA-branded and
B, C, E, G, H, K, N, Q, V, Y Series Products
English
1-877-4-Lenovo
(1-877-453-6686)
24 hours a day
7 days a week
Hope this helps,
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter! -
I bought the photoshop install online and I put it on my laptop. But now I have a new and better computer for photo and video but I can not figure out how to reinstall my photoshop on this new computer. When I bought it, they said I would be able to install it on 2 different computers. PS they are both PC computers.
Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 |12 | 11, 10 | 9, 8, 7
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.window using the Lightroom 3 link to see those 'Important Instructions'. -
How to reinstall Microsoft Office for Mac after new hard drive?
Recently I had a problem with my Macbook Pro, and unfortunately had to purchase a new hard drive and have it installed. This also led to the loss of data and other things, such as Microsoft Office for Mac. I know this is an Apple community, but I get better answers here than at the Microsoft communities so I'm hoping someone can help find out how to reinstall Microsoft Office 2013. I logged onto my Microsft account and it says that there is no record of me purchasing Microsoft Office on that account but I know thats the account that it was purchased on, so i cannot get my product key to reinstall it as directed. Someone please help!!!!
Try calling MS support and explaining the situation, maybe they will issue a new key.
1 (800) 642-7676 (Consumer)
Microsoft Corporation, Customer service
24/7 Microsoft Support - Microsoft.MyPhoneSupport.com
Admicrosoft.myphonesupport.com/
1 (855) 698 3249
Phone Our Tech Support Experts 24/7 For Microsoft Support. Call Now...
Support for Microsoft? - Call Toll Free Now
Adwww.supportdeskwiz.com/Microsoft
1 (855) 760 8099
24x7 Tech Support for Microsoft by SDW.
Microsoft Windows Support - Call US Toll Free
Admicrosoft-os-support.itechline.com/
1 (855) 281 4201
Tech Support for Microsoft Windows.
Live Tech Support - Windows 7 Support - Outlook Support -
How to reinstall from time machine onto a new hard drive?
how to reinstall the system from time machine to a new hard drive?
If you are connected to the internet you can do this.
Boot your computer and immediately hold down command, option and R (three keys together). This gets you connected with internet recovery.
See this article for more directions: http://support.apple.com/kb/HT4718.
This process installs an OS on your blank drive. You can then boot from the fresh OS installation and restore from your Time Machine back up.
Note that you cannot boot from a TM back up. -
How to reinstall 10.4.11 without disk
how to reinstall mac os x 10.4.11 without disk
You can't. You need to purchase replacement discs from Apple if they are available:
Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
To contact product and tech support: Apple - Support - Contact Apple Support.
For Mac App Store: Apple - Support - Mac App Store.
For iTunes: Apple - Support - iTunes. -
how to reinstall ios 7 because in the setting it did not take my number and i can not know my credit please if you can help
you forgot your credit card info? trying to reinstall it wont fix this ( which you cant do anyway,although you can restore it to an earlier setting)
Maybe you are looking for
-
Hi, I created a project Enterprise field named "Countries and Cities" which contains a lookup table with information such as "USA.Seattle". How can I add this field in the oData connection file? Thanks
-
How do I put the songs on my Itunes in a backup file/folder?
Well, i have a ipod 30g video. I just recently cleaned out my computer a little bit and when I try to open my computer it reads: "quicktime failed to initialize (error -2093)." "quicktime is required to run iTunes. Please reinstall iTunes". Now I got
-
How do you add old movie count downs to Final Cut Pro X ?
I am trying to make a video from the films that i recorded while skiing, and i was wondering how i would add an old movie count down into Final Cut Pro X, becasue i cant seem to find anywhere that does it. Thanks for the help guys.
-
Classic Environment for OS X Tiger
Hello Mac-users. Before I got my MacBook, I used to play Diablo. Well, I wanted to play Diablo on my Mac too, but as I was about to install it, a message popped up and said, that my system could not open it. Maybe I need Classic Environment for my OS
-
HT202905 Will AppleScript ever work on my iPad? I want it in numbers for stock info
Will AppleScript ever be supported on iOS? I want to use it to get stock information into numbers.